Artur J. Jaworski PhD MSc(Eng) DIC CEng FRAeS CMgr FCMI FHEA
Professor in Engineering and Head of School
School of Engineering and Design
College of Technology and Environment, London South Bank University
103 Borough Road, London SE1 0AA, United Kingdom
E: artur.jaworski@lsbu.ac.uk; T: +44(0) 207 815 7502
W: https://researchportal.lsbu.ac.uk/en/persons/artur-jaworski
Publications
Journal Publications
Nia BB, Hamood A, Ja'fari M and Jaworski AJ 2026 Thermoacoustic Wave-Actuation of a Synthetic Jet: Effect of Thermoacoustic Parameters on the Jet Performance, Applied Thermal Engineering, in press. DOI: 10.1016/j.applthermaleng.2025.128906
Chauhan P, Ja'fari M and Jaworski AJ 2026 A numerical study of horizontal axis wind turbine blade contamination: Aerodynamic and sustainable impacts, Renewable Energy, 256, Part B (January 2026), 124033. DOI: 10.1016/j.renene.2025.124033
Ifidon O, Pandey DS, Ahmad K, Jaworski AJ and Asfand F 2025 A review of industrial pumps for viscous and non-Newtonian slurry transport, International Journal of Thermofluids, 30 (November), 101450. DOI: 10.1016/j.ijft.2025.101450
Nia BB, Hamood A, Ja'fari M and Jaworski AJ 2025 Analysis of nonlinear harmonics and transient phenomena in a standing wave thermoacoustic engine, Thermal Science and Engineering Progress, 62 (June 2025), 103628. DOI: 10.1016/j.tsep.2025.103628
Shojae FJ, Salehi M, Ja'fari M, Jaworski AJ and Nia BB 2025 Passive control of vortex breakdown on slender delta wing using control bump and cavity at low Reynolds number, Ocean Engineering, 329 (15 June), 121086. DOI: 10.1016/j.oceaneng.2025.121086
Lin J, Gende M, Zhan Y, Zhao Y, Zheng G, Jaworski AJ, Cui C and Cao H 2025 Molecular dynamics investigation of polyvinylidene difluoride dipole movement in electromechanical stretching: A key impact on the polymer’s piezoelectric phenomenon, Polymer, 325 (22 April), 128232. DOI: 10.1016/j.polymer.2025.128232
Fazli M, Mazaheri K, Ja’fari M, Jaworski AJ and Zarch AB 2025 Heat-driven thermoacoustic refrigeration: A comprehensive review of technologies, applications, trends and challenges, Applied Thermal Engineering, 260 (1 February), 124996. DOI: 10.1016/j.applthermaleng.2024.124996
Dhuchakallaya I, Saechan P, Hamood A and Jaworski AJ 2024 Low-Cost Cascade Thermoacoustic Electric Generator for Energy Harvesting, International Journal of Thermofluids, 24 (1 November), 100954. DOI: 10.1016/j.ijft.2024.100954
Yahya SG, Hamood A, Jaworski AJ, Mao X 2024 Development of a two-stage thermoacoustic refrigerator prototype, International Journal of Thermofluids, 24 (1 November), 100903. DOI: 10.1016/j.ijft.2024.100903
Hamood A, Jaworski AJ, Blunt L and Townsend A 2024 The Application of Additive Manufacturing to Heat Exchangers for Oscillatory Flow: A Case Study, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 238(10), August, 1531-1540. DOI: 10.1177/09544054231199520
Mohd Saat FAZ, Jaworski AJ and Hamood A 2024 The effect of operating conditions on heat transfer for parallel plate heat exchangers of thermoacoustic standing wave systems, International Journal of Thermofluids, 23 (1 August), 100771. DOI: 10.1016/j.ijft.2024.100771
Ja’fari M, Khan MI, Al-Ghamdi SG, Jaworski AJ and Asfand F 2023 Waste Heat Recovery in Iron and Steel Industry Using Organic Rankine Cycles, Chemical Engineering Journal, 477 (1 December), 146925. DOI: 10.1016/j.cej.2023.146925
Ja’fari M, Shojae FJ and Jaworski AJ 2023 Synthetic Jet Actuators: Overview and Applications, International Journal of Thermofluids, 20 (November), 100438. DOI: 10.1016/j.ijft.2023.100438
Nia BB, Ja’fari M, Ranjbar AR and Jaworski AJ 2023 Passive Control of Boundary Layer Flow Separation on a Wind Turbine Airfoil Using Vortex Generators and Slot, Ocean Engineering, 283 (1 September), 115170. DOI: 10.1016/j.oceaneng.2023.115170
Hamood A and Jaworski AJ 2023 Thermoacoustic Cascade Engine Free from Resonance Length, Energy, 271 (15 May), 126881. DOI: 10.1016/j.energy.2023.126881
Hamood A, Ja'fari M and Jaworski AJ 2023 Synthetic Jet Flow Driven by a Standing-Wave Thermoacoustic Heat Engine, Thermal Science and Engineering Progress, 39 (1 March), 101725. DOI: 10.1016/j.tsep.2023.101725
Ja'fari M and Jaworski AJ 2023 On the Nonlinear Behaviour of Oscillatory Flow in a High Pressure Amplitude Standing-Wave Thermoacoustic Heat Engine, International Journal of Heat and Mass Transfer, 201 (Part 2), 123595. DOI: 10.1016/j.ijheatmasstransfer.2022.123595
Ja'fari M, Jaworski AJ and Rona A 2022 Numerical Study of Flow Separation Control over a Circular Hump Using Synthetic Jet Actuators, AIP Advances, 12, 095205. DOI: 10.1063/5.0099926
Ja'fari M, Jaworski AJ, Piccolo A and Simpson K 2022 Numerical Study of Transient Characteristics of a Standing-Wave Thermoacoustic Heat Engine, International Journal of Heat and Mass Transfer, 186, 122530. DOI: 10.1016/j.ijheatmasstransfer.2022.122530
Ja'fari M, Jaworski AJ and Rona A 2022 Application of Synthetic Jet Arrays for Flow Separation Control on a Circular “Hump” Model, Experimental Thermal and Fluid Science, 131, 110543. DOI: 10.1016/j.expthermflusci.2021.110543
Ilori OM, Jaworski AJ, Mao X and Ismail OS 2021 Effects of Edge Shapes on Thermal-Fluid Processes in Oscillatory Flows, Thermal Science and Engineering Progress, 25, 101004. DOI: 10.1016/j.tsep.2021.101004
Azzawi IDJ, Jaworski AJ and Mao X 2021 An Overview of Synthetic Jet Under Different Clamping and Amplitude Modulation Techniques, Journal of Fluids Engineering, Transactions of the ASME, 143(3): 031501 (12 pages). DOI: 10.1115/1.4048930
Piccolo A and Jaworski AJ 2020 Experimental study of heat transfer characteristics of finned-tube and circular-pore heat exchangers in oscillatory flow, Applied Thermal Engineering, 181, 116022. DOI: 10.1016/j.applthermaleng.2020.116022 <PDF> <PDF>
Al-Alweet F, Jaworski AJ, Alghamdi Y, Almutairi Z and Kołłątaj J 2020 A Simplified Numerical Approach to Examine the Sensitivity of Two-Electrode Capacitance Sensor Orientation to Capture Different Gas–Liquid Flow Patterns in a Small Circular Pipe, Sensors, 20(17), 4971. DOI: 10.3390/s20174971
Al-Alweet F, Jaworski AJ, Alghamdi Y, Almutairi Z and Kołłątaj J 2020 Systematic Frequency and Statistical Analysis Approach to Identify Different Gas–Liquid Flow Patterns Using Two Electrodes Capacitance Sensor: Experimental Evaluations, Energies, 13(11), 2932. DOI: 10.3390/en13112932
Hamood A, Jaworski AJ and Mao X 2019 Development and Assessment of Two-Stage Thermoacoustic Electricity Generator, Energies, 12(9), 1790. DOI: 10.3390/en12091790
Abdoulla-Latiwish KOA and Jaworski AJ 2019 Two-stage travelling-wave thermoacoustic electricity generator for rural areas of developing countries, Applied Acoustics, 151, 87-98. DOI: 10.1016/j.apacoust.2019.03.010
Saechan P and Jaworski AJ 2019 Numerical Studies of Co-Axial Travelling-Wave Thermoacoustic Cooler Powered by Standing-Wave Thermoacoustic Engine, Renewable Energy, 139, 600-610. DOI: 10.1016/j.renene.2019.02.059
Zhang S, Jaworski AJ, McParlin SC and Turner JT 2019 Experimental investigation of the flow structures over a 40° swept wing, Aeronautical Journal, 123(1259), 39-55. DOI: 10.1017/aer.2018.118
Saechan P and Jaworski AJ 2018 Thermoacoustic cooler to meet medical storage needs of rural communities in developing countries - high pressure system, Thermal Science and Engineering Progress, 8, 31-46 (December). DOI: 10.1016/j.tsep.2018.07.010
Ilori OM, Jaworski AJ and Mao X 2018 Experimental and numerical investigations of thermal characteristics of heat exchangers in oscillatory flow, Applied Thermal Engineering, 144, 910-925 (November). DOI: 10.1016/j.applthermaleng.2018.07.073
Saechan P and Jaworski AJ 2018 Thermoacoustic cooler to meet medical storage needs of rural communities in developing countries, Thermal Science and Engineering Progress, 7, 164-175 (September). DOI: 10.1016/j.tsep.2018.05.001
Li X, Jaworski AJ and Mao X 2018 Comparative study of two non-intrusive measurement methods for bubbling gas-solids fluidized beds: electrical capacitance tomography and pressure fluctuations, Flow Measurement and Instrumentation, 62, 255-268 (August). DOI: 10.1016/j.flowmeasinst.2017.08.002
Li X, Jaworski AJ and Mao X 2018 Bubble size and bubble rise velocity estimation by means of electrical capacitance tomography within gas-solids fluidized beds, Measurement, 117, 226-240 (March). DOI: 10.1016/j.measurement.2017.12.017
Hamood A, Jaworski AJ, Mao X and Simpson K 2018 Design and construction of a two-stage thermoacoustic electricity generator with push-pull linear alternator, Energy, 144, 61-72 (February). DOI: 10.1016/j.energy.2017.11.148
Abdoulla-Latiwish KOA, Mao X and Jaworski AJ 2017 Thermoacoustic micro-electricity generator for rural dwellings in developing countries driven by waste heat from cooking activities, Energy, 134, 1107-1120. DOI: 10.1016/j.energy.2017.05.029
Mohd Saat FAZ and Jaworski AJ 2017 Numerical predictions of early stage turbulence in oscillatory flow across parallel-plate heat exchangers of a thermoacoustic system, Applied Sciences, 7(7), 673. DOI: 10.3390/app7070673
Mohd Saat FAZ and Jaworski AJ 2017 The effect of temperature field on low amplitude oscillatory flow within a parallel-plate heat exchanger in a standing wave thermoacoustic system, Applied Sciences, 7(4), 417. DOI: 10.3390/app7040417
Mohd Saat FAZ and Jaworski AJ 2017 Friction factor correlation for regenerator working in a travelling-wave thermoacoustic system, Applied Sciences, 7(3), 253. DOI: 10.3390/app7030253
Yahya S Gh, Mao X and Jaworski AJ 2017 Experimental investigation of thermal performance of random stack materials for use in standing wave thermoacoustic refrigerators, International Journal of Refrigeration, 75, 52-63. DOI: 10.1016/j.ijrefrig.2017.01.013 <PDF>
Kamsanam W, Mao X and Jaworski AJ 2016 Thermal performance of finned-tube thermoacoustic heat exchangers in oscillatory flow conditions, International Journal of Thermal Sciences, 101, 169-180. DOI: 10.1016/j.ijthermalsci.2015.10.032
Theobald R, Mao X, Jaworski AJ and Berson A 2015 Modal and non-modal stabilities of flow around a stack of plates, European Journal of Mechanics – B/Fluids, 53, 113-118. DOI: 10.1016/j.euromechflu.2015.04.005
Kamsanam W, Mao X and Jaworski AJ 2015 Development of experimental techniques for measurement of heat transfer rates in heat exchangers in oscillatory flows, Experimental Thermal and Fluid Science, 62, 202-215. DOI: 10.1016/j.expthermflusci.2014.12.008
Yu Z, Mao X and Jaworski AJ 2014 Experimental study of heat transfer in oscillatory gas flow inside a parallel-plate channel with imposed axial temperature gradient, International Journal of Heat and Mass Transfer, 77, 1023-1032. DOI: 10.1016/j.ijheatmasstransfer.2014.06.031 <PDF>
Jaworski AJ and Mao X 2013 Development of thermoacoustic devices for power generation and refrigeration, Journal of Power and Energy, Proceedings of the IMechE – Part A, 227(7), 762-782. DOI: 10.1177/0957650913493622
Kang H, Fan J, Zheng H and Jaworski AJ 2013 Thermoacoustic travelling-wave cooler driven by a cascade thermoacoustic engine, Applied Thermal Engineering, 59, 223-231. DOI: 10.1016/j.applthermaleng.2013.05.044
Abduljalil ARS, Yu Z and Jaworski AJ 2012 Nonlinear phenomena occurring during the start-up process of a travelling-wave looped-tube thermoacoustic engine, Journal of Power and Energy: Proceedings of the IMechE – Part A, 226(7), 822-836. DOI: 10.1177/0957650912454793 <PDF>
Yu Z, Jaworski AJ and Backhaus S 2012 Travelling-wave thermoacoustic electricity generator using an ultra-compliant alternator for utilization of low-grade thermal energy, Applied Energy, 99, 135-145. DOI: 10.1016/j.apenergy.2012.04.046
Jaworski AJ and Piccolo A 2012 Heat transfer processes in parallel-plate heat exchangers of thermoacoustic devices - numerical and experimental approaches, Applied Thermal Engineering, 42, 145-153. DOI: 10.1016/j.applthermaleng.2012.03.014 <PDF>
Saha CR, Riley PH, Paul J, Yu Z, Jaworski AJ and Johnson CM 2012 Halbach array linear alternator for thermo-acoustic engine, Sensors and Actuators A: Physical, 178, 179-187. DOI: 10.1016/j.sna.2012.01.042
Abduljalil ARS, Yu Z and Jaworski AJ 2011 Design and experimental validation of looped-tube thermoacoustic engine, Journal of Thermal Science, 20(5), 423-429. DOI: 10.1007/s11630-011-0490-5 <PDF>
Zhang S, Jaworski AJ, Turner JT and Wood NJ 2011 Investigation of the three-dimensional flow over a 40° swept wing, Aeronautical Journal, 115(1169), 441-449. <PDF>
Shi L, Yu Z and Jaworski AJ 2011 Development of Experimental Methods to Capture the Unsteady Temperature Field Distributions in Thermoacoustic Devices, Experimental Techniques, 35(2), 68-75. DOI: 10.1111/j.1747-1567.2009.00601.x <PDF>
Shi L, Yu Z and Jaworski AJ 2011 Investigation into the Strouhal numbers associated with vortex shedding from parallel-plate thermoacoustic stacks in oscillatory flow conditions, European Journal of Mechanics – B/Fluids, 30(2), 206-217. DOI: 10.1016/j.euromechflu.2010.10.005 <PDF>
Yu Z, Saechan P and Jaworski AJ 2011 A method of characterising performance of audio loudspeakers for linear alternator applications in low-cost thermoacoustic electricity generators, Applied Acoustics, 72(5), 260-267. DOI: 10.1016/j.apacoust.2010.11.011
Abduljalil ARS, Yu Z and Jaworski AJ 2011 Selection and experimental evaluation of low-cost porous materials for regenerator applications in thermoacoustic engines, Materials and Design, 32(1), 217-228. DOI: 10.1016/j.matdes.2010.06.012 <PDF>
Shi L, Mao X and Jaworski AJ 2010 Application of planar laser induced fluorescence measurement techniques to study heat transfer characteristics of parallel-plate heat exchangers in thermoacoustic devices, Measurement Science and Technology, 21(11), 115405 (16pp). DOI: 10.1088/0957-0233/21/11/115405 <PDF>
Yu Z, Jaworski AJ and Adduljalil ARS 2010 Fishbone-like instability in a looped-tube thermoacoustic engine, Journal of Acoustical Society of America, 128(4), EL188-194. DOI: 10.1121/1.3486198
Mao X and Jaworski AJ 2010 Oscillatory flow at the end of parallel plate stacks – phenomenological and similarity analysis, Fluid Dynamics Research, 42(5), 055504. DOI: 10.1088/0169-5983/42/5/055504 <PDF>
Shi L, Yu Z and Jaworski AJ 2010 Application of laser-based instrumentation for measurement of time-resolved temperature and velocity fields in the thermoacoustic system, International Journal of Thermal Sciences, 49(9), 1688-1701. DOI: 10.1016/j.ijthermalsci.2010.03.015 <PDF>
Yu Z, Jaworski AJ and Backhaus S 2010 A low-cost electricity generator for rural areas using a travelling wave looped-tube thermoacoustic engine, Journal of Power and Energy: Proceedings of the IMechE – Part A, 224(6), 787-795. DOI: 10.1243/09576509JPE864 <PDF>
Yu Z and Jaworski AJ 2010 Optimisation of thermoacoustic stacks for low onset temperature engines, Journal of Power and Energy: Proceedings of the IMechE – Part A, 224(3), 329-337. DOI: 10.1243/09576509JPE845 <PDF>
Shi L, Yu Z and Jaworski AJ 2010 Vortex shedding flow patterns and their transitions in oscillatory flows past parallel-plate thermoacoustic stacks, Experimental Thermal and Fluid Science, 34(7), 954-965. DOI: 10.1016/j.expthermflusci.2010.02.012
Mao X and Jaworski AJ 2010 Application of particle image velocimetry measurement techniques to study turbulence characteristics of oscillatory flows around parallel-plate structures in thermoacoustic devices, Measurement Science and Technology, 21(3), 035403 (16pp). DOI: 10.1088/0957-0233/21/3/035403 <PDF>
Yu Z and Jaworski AJ 2010 Impact of acoustic impedance and channel dimensions on the power output capacity of the regenerators in travelling-wave thermoacoustic engines, Energy Conversion and Management, 51(2), 350-359. DOI: 10.1016/j.enconman.2009.09.032
Abduljalil ARS, Yu Z and Jaworski AJ 2009 Construction and performance characterization of the looped-tube travelling-wave thermoacoustic engine with ceramic regenerator, International Journal of Aerospace and Mechanical Engineering, 3(1), 19-22. <Link to Article>
Shi L, Yu Z and Jaworski AJ 2009 Vortex shedding at the end of parallel-plate thermoacoustic stack in the oscillatory flow conditions, International Journal of Aerospace and Mechanical Engineering, 3(1), 80-87. <Link to Article>
Yu Z and Jaworski AJ 2009 Impact of viscous and heat relaxation loss on the critical temperature gradients of thermoacoustic stacks, International Journal of Aerospace and Mechanical Engineering, 3(1), 88-94. <Link to Article>
Jaworski AJ and Meng G 2009 On-line measurement of separation dynamics in primary gas/oil/water separators: challenges and technical solutions - a review, Journal of Petroleum Science and Engineering, 68(1-2), 47-59. DOI: 10.1016/j.petrol.2009.06.007
Jaworski AJ, Mao X, Mao X and Yu Z 2009 Entrance effects in the channels of the parallel plate stack in oscillatory flow conditions, Experimental Thermal and Fluid Science, 33(3), 495-502. DOI: 10.1016/j.expthermflusci.2008.11.003
Mao X, Yu Z, Jaworski AJ and Marx D 2008 PIV studies of coherent structures generated at the end of a stack of parallel plates in a standing wave acoustic field, Experiments in Fluids, 45(5), 833-846. DOI: 10.1007/s00348-008-0503-7 <PDF>
Watson M, Jaworski AJ and Wood NJ 2007 Application of synthetic jet actuators for the modification of the characteristics of separated shear layers on slender wings, Aeronautical Journal, 111(1122), 519-529. <PDF> (RAeS login required)
Jaworski AJ and Dyakowski T 2007 Observations of “granular jump” in the pneumatic conveying system, Experimental Thermal and Fluid Science, 31(8), 877-885. DOI: 10.1016/j.expthermflusci.2006.09.003
Hale JM, White NM, Jaworski AJ, Meng G and Dyakowski T 2006 The Design of a Modular Probe for Detecting Phase Interfaces in Oil/Water/Gas Primary Separator Plant, Experimental Techniques, 30(6), 37-43. DOI: 10.1111/j.1747-1567.2006.00105.x
Meng G, Jaworski AJ and Kimber JCS 2006 A multi-electrode capacitance probe for phase detection in oil-water separation processes: design, modelling and validation, Measurement Science and Technology, 17(4). 881-894. DOI: 10.1088/0957-0233/17/4/038
Meng G, Jaworski AJ and White NM 2006 Composition measurements of crude oil and process water emulsions using thick-film ultrasonic transducers, Chemical Engineering and Processing, 45(5), 383-391. DOI: 10.1016/j.cep.2005.10.004
Marx D, Mao X and Jaworski AJ 2006 Acoustic coupling between the loudspeaker and the resonator in a standing-wave thermoacoustic device, Applied Acoustics, 67(5), 402-419. DOI: 10.1016/j.apacoust.2005.08.001
Meng G, Jaworski AJ, Dyakowski T, Hale JM and White NM 2005 Design and testing of a thick-film dual-modality sensor for composition measurements in heterogeneous mixtures, Measurement Science and Technology, 16(4), 942-954. DOI: 10.1088/0957-0233/16/4/006
Jaworski AJ and Dyakowski T 2005 Measurements of oil-water separation dynamics in the primary separation systems, Flow Measurement and Instrumentation, 16(2-3), 113-127. DOI: 10.1016/j.flowmeasinst.2005.02.012
Dyakowski T, Hale JM, Jaworski AJ, White NM, Nowakowski A, Meng G and Rwifa S 2005 Dual modality probe for characterisation of heterogeneous mixtures, IEEE Sensors Journal, 5(2), 134-138. DOI: 10.1109/JSEN.2005.843902 <PDF>
Jaworski AJ and Dyakowski T 2003 Application of distributed sensors for monitoring multiphase processes, Trans. ASME: Journal of Energy Resources Technology, 125(4), 258-265. DOI: 10.1115/1.1626133 <PDF>
Dyakowski T and Jaworski AJ 2003 Non-invasive process imaging – principles and applications of industrial process tomography, Chemical Engineering & Technology, 26(6), 697-706. DOI: 10.1002/ceat.200390107 <PDF>
Watson M, Jaworski AJ and Wood NJ 2003 A study of synthetic jets from rectangular and dual-circular orifices, Aeronautical Journal, 107(1073), 427-434. DOI: 10.1017/S000192400001335X <PDF>
Watson M, Jaworski AJ and Wood NJ 2003 A contribution to the understanding of flow interactions between multiple synthetic jets, AIAA Journal, 41(4), p 747-749. DOI: 10.2514/2.2008 <PDF>
Jaworski AJ and Dyakowski T 2002 Investigations of flow instabilities within the dense phase pneumatic conveying system, Powder Technology, 125, 279-291. DOI: 10.1016/S0032-5910(01)00516-2 <PDF>
Jaworski AJ and Dyakowski T 2001 Application of electrical capacitance tomography for measurement of gas-solids flow characteristics in a pneumatic conveying system, in special issue of Measurement Science and Technology, 12(8), 1109-1119. DOI: 10.1088/0957-0233/12/8/317 <PDF>
Dyakowski T, Jeanmeure LFC and Jaworski AJ 2000 Applications of electrical tomography for gas-solids and liquid-solids flows – a review, Powder Technology, 112, 174-192. DOI: 10.1016/S0032-5910(00)00292-8 <PDF>
Jaworski AJ and Bolton GB 2000 The design of an electrical capacitance tomography sensor for use with media of high dielectric permittivity, Measurement Science and Technology, 11(6), 743-757. DOI: 10.1088/0957-0233/11/6/318 <PDF>
Jaworski AJ, Dyakowski T and Davies GA 1999 A capacitance probe for interface detection in oil and gas extraction plant, Measurement Science and Technology, 10, L15-L20. DOI: 10.1088/0957-0233/10/3/002 <PDF>
Gogol W and Jaworski AJ 1993 Low mass-flow rate in flat-plate liquid heating solar collectors, Journal of Power Technologies (previous title: Bulletin of Institute of Heat Engineering, WUT), 78, 3-19. <Journal Repository> <PDF>
Editorials
Jaworski AJ 2019 Editorial for Special Issue: “Fluid Flow and Heat Transfer”, Energies, 12, 3044
Jaworski AJ 2017 Editorial for Special Issue: “Heat Transfer Processes in Oscillatory Flow Conditions”, Applied Sciences, 7, 994. DOI: 10.3390/app7100994
Conference Publications (Refereed)
Huang H and Jaworski AJ 2019 Numerical simulation of the effect of plate spacing on heat transfer characteristics within a parallel-plate heat exchanger in a standing wave thermoacoustic system (24 Sep 2019). 2019 International Conference on Advances in Energy Systems and Environmental Engineering, ASEE 2019; Wroclaw; Poland; 9 – 12 June 2019, In: E3S Web of Conferences. 116, 9 p., 00028
Hamood A and Jaworski AJ 2019 Experimental investigations of the performance of a thermoacoustic electricity generator (24 Sep 2019). 2019 International Conference on Advances in Energy Systems and Environmental Engineering, ASEE 2019; Wroclaw; Poland; 9 – 12 June 2019, In: E3S Web of Conferences. 116, 8 p., 00025
Li X, Mao X and Jaworski AJ 2017 Hydrodynamic characterization of gas-solids fluidized beds by means of electrical capacitance tomography, Proc. International conference on advances in energy systems and environmental engineering (ASEE17), July 2-5, Wroclaw, Poland
Hamood A, Mao X and Jaworski AJ 2017 Model and design of a four-stage thermoacoustic electricity generator with two push-pull linear alternators, Proc. International conference on advances in energy systems and environmental engineering (ASEE17), July 2-5, Wroclaw, Poland
Saechan P, Jaworski AJ, Abbo MS, Masera-Cerutti O and Dhuchakallaya I 2017 Thermoacoustic refrigerator driven by a combustion-powered thermoacoustic engine for rural communities, Proc. International conference on advances in energy systems and environmental engineering (ASEE17), July 2-5, Wroclaw, Poland
Li X, Jaworski AJ and Mao X 2016 Investigation of bubble behaviour in a gas-solid fluidized bed by means of a twin-plane ECT sensor, Proc. 8th World Congress on Industrial Process Tomography, paper B4, September 26-29, Iguassu Falls, Brazil
Yahya SG, Mao X and Jaworski AJ 2016 Two-stage looped-tube thermoacoustic cooler - Design and preliminary testing, Lecture Notes in Engineering and Computer Science, pp. 1044-1049 (Proc. World Congress in Engineering, London, UK, 29 June - 1 July)
Li X, Jaworski AJ and Mao X 2016 Application of a twin-plane electrical capacitance tomography sensor for characterising bubble behaviour in a gas-solids fluidized bed, Lecture Notes in Engineering and Computer Science, pp. 1100-1105 (Proc. World Congress in Engineering, London, UK, 29 June - 1 July)
Hamood A, Mao X and Jaworski AJ 2016 Two-stage thermoacoustic electricity generator for waste heat recovery, Lecture Notes in Engineering and Computer Science, pp. 944-949 (Proc. World Congress in Engineering, London, UK, 29 June - 1 July)
Azzawi IDJ, Mao X and Jaworski AJ 2016 Design, fabrication and characterization of low speed open-jet wind tunnel, Lecture Notes in Engineering and Computer Science, pp. 883-888 (Proc. World Congress in Engineering, London, UK, 29 June - 1 July)
Yahya SG, Mao X and Jaworski AJ 2015 Characterization of inexpensive stack materials for use in standing wave thermoacoustic refrigerators, Proceedings of The 24th IIR International Congress of Refrigeration (ICR2015), Paper ID 526, August 16-22, Yokohama, Japan
Yahya SG, Mao X and Jaworski AJ 2015 Design a two-stage looped-tube thermoacoustic cooler for thermal management of enclosures, Proceedings of The 24th IIR International Congress of Refrigeration (ICR2015), Paper ID 528, August 16-22, Yokohama, Japan
Ilori OM, Mao X and Jaworski AJ 2015 CFD study of oscillatory flow through 90º bends of thermoacoustic devices, Proceedings of The 24th IIR International Congress of Refrigeration (ICR2015), Paper ID 523, August 16-22, Yokohama, Japan
Ilori OM, Mao X and Jaworski AJ 2015 Numerical simulation of oscillatory flow and heat transfer in the heat exchangers of thermoacoustic systems, Proceedings of The 24th IIR International Congress of Refrigeration (ICR2015), Paper ID 522, August 16-22, Yokohama, Japan
Hamood A, Mao X and Jaworski AJ 2015 Design of two-stage thermoacoustic stirling engine coupled with push-pull linear alternator for waste heat recovery, Proceedings of The 24th IIR International Congress of Refrigeration (ICR2015), Paper ID 531, August 16-22, Yokohama, Japan
Saechan P, Mao X and Jaworski AJ 2015 Optimal design of a thermoacoustic system comprising of a standing-wave engine driving a travelling-wave cooler, Proceedings of The 24th IIR International Congress of Refrigeration (ICR2015), Paper ID 514, August 16-22, Yokohama, Japan
Ilori OM, Jaworski AJ and Mao X 2015 Numerical analysis of the heat transfer in an oscillatory flow around the heat exchangers of thermoacoustic systems, Proc. CHT-15, 25-29 May, New Brunswick, NJ, USA
Ilori OM, Mao X and Jaworski AJ 2014 CFD-Simulation of Oscillatory Flow Around the Heat Exchangers of Thermoacoustic Devices, Proc. ASME 2014 International Mechanical Engineering Congress & Exposition, Paper ID IMECE2014-37926, Montreal, Canada, 14-20 November
Ilori OM, Mao X and Jaworski AJ 2013 Design of thermoacoustic rig for the analysis of thermal and hydraulic performance of heat exchangers in oscillatory flow, Proc. World Congress on Engineering, Vol. III, 1669-1674, London, UK, 3-5 July
Mohd Saat FAZ and Jaworski AJ 2013 Oscillatory flow and heat transfer within parallel-plate heat exchangers of thermoacoustic systems, Proc. World Congress on Engineering, Vol. III, 1699-1704, London, UK, 3-5 July
Abdoulla KOA, Kang HF and Jaworski AJ 2013 Travelling wave thermoacoustic electricity generator for rural areas using a side-branch alternator arrangement, Proc. World Congress on Engineering, Vol. III, 1835-1840, London, UK, 3-5 July
Kamsanam W, Mao X and Jaworski AJ 2013 Experimental investigation of heat transfer effectiveness on finned-tube thermoacoustic heat exchanger, Proc. World Congress on Engineering, Vol. III, 1979-1984, London, UK, 3-5 July
Saechan P, Kang HF, Mao X and Jaworski AJ 2013 Thermoacoustic refrigerator driven by a combustion-powered thermoacoustic engine – demonstrator of device for rural areas of developing countries, Proc. World Congress on Engineering, Vol. III, 2097-2102, London, UK, 3-5 July
Piccolo A, Jaworski AJ and Mao X 2011 Experimental and numerical study of temperature distribution and heat transfer in parallel-plate thermoacoustic heat exchangers, Proc. 66th National Congress of Associazione Termotecnica Italiana (ATI), Paper 06_181, 5-9 September 2011, University of Calabria, Italy
Yu Z, Saat FAZ and Jaworski AJ 2011 Experimental testing of the flow resistance and thermal conductivity of porous materials for regenerators, Proc. 23rd IIR International Congress of Refrigeration, Paper ID 579, 21-26 August 2011, Prague, Czech Republic
Saat FAZ, Yu Z and Jaworski AJ 2011 CFD-assisted regenerator analysis: application to thermoacoustic system, Proc. 23rd IIR International Congress of Refrigeration, Paper ID 580 – keynote, 21-26 August 2011, Prague, Czech Republic
Mao X, Kamsanam W and Jaworski AJ 2011 Convective heat transfer from fins-on-tubes heat exchangers in an oscillatory flow, Proc. 23rd IIR International Congress of Refrigeration, Paper ID 589, 21-26 August 2011, Prague, Czech Republic
Saechan P, Yu Z and Jaworski AJ 2011 Optimal design of coaxial travelling wave thermoacoustic cooler, Proc. 23rd IIR International Congress of Refrigeration, Paper ID 590, 21-26 August 2011, Prague, Czech Republic
Yu Z, Jaworski AJ and Backhaus S 2010 Design of a Low Cost Thermoacoustic Electricity Generator and its Experimental Verification, Proc. 10th Biennial Conference on Engineering Systems Design and Analysis, paper ESDA2010-24598, 12-14 July 2010, Istanbul, Turkey
Mao X, Shi L, Jaworski AJ and Kamsanam W 2010 Heat Transfer on Parallel Plate Heat Exchangers in an Oscillatory Flow, Proc. 10th Biennial Conference on Engineering Systems Design and Analysis, paper ESDA2010-24760, 12-14 July 2010, Istanbul, Turkey
Mao X, Saechan P and Jaworski AJ 2010 Evaluation of Random Stack Materials for Use in Thermoacoustic Refrigerators, Proc. 10th Biennial Conference on Engineering Systems Design and Analysis, paper ESDA2010-24763, 12-14 July 2010, Istanbul, Turkey
Abduljalil ARS, Yu Z and Jaworski AJ 2009 Experimental Characterisation of Low-Cost Regenerators for Travelling-Wave Thermoacoustic Devices,Proc. 7th Annual International Energy Conversion Engineering Conference, paper AIAA-2009-4580, 2-5 August 2009, Denver, Colorado
Shi L, Yu Z and Jaworski AJ 2009 PIV&PLIF Measurement of the Time-resolved Velocity and Temperature Fields around the Fins of a Thermoacoustic Heat Exchanger in Oscillatory Flow Conditions, Proc. 7th Annual International Energy Conversion Engineering Conference, paper AIAA-2009-4541, 2-5 August 2009, Denver, Colorado
Yu Z, Backhaus S and Jaworski AJ 2009 Design and Testing of a Travelling-wave Looped-tube Engine for low-cost electricity generators in remote and rural areas, Proc. 7th Annual Intl. Energy Conversion Engineering Conference, paper AIAA2009-4540, 2-5 August 2009, Denver, Colorado
Yu Z, Jaworski AJ, Abduljalil ARS 2009 Impact of viscous and heat relaxation loss on the critical temperature gradients of thermoacoustic stacks, International Conference on Fluid Mechanics, Heat Transfer and Thermodynamics (FMHT 2009), Dubai, United Arab Emirates, January 28-30, Proc. of World Academy of Science, Engineering and Technology, 37, 774-780
Shi L, Yu Z, Jaworski AJ, Abduljalil ARS 2009 Vortex Shedding at the End of Parallel-plate Thermoacoustic Stack in the Oscillatory Flow Condition, International Conference on Fluid Mechanics, Heat Transfer and Thermodynamics (FMHT 2009), Dubai, United Arab Emirates, January 28-30, Proc. of World Academy of Science, Engineering and Technology, 37, 766-773
Abduljalil ARS, Yu Z, Jaworski AJ, Shi L 2009 Construction and performance characterization of the looped-tube travelling-wave thermoacoustic engine with ceramic regenerator, International Conference on Fluid Mechanics, Heat Transfer and Thermodynamics (FMHT 2009), Dubai, United Arab Emirates, January 28-30, Proc. of World Academy of Science, Engineering and Technology, 37, 330-333
Mao XA, Jaworski AJ, Shi L 2007 The boundary layer velocity measurements in a high-amplitude standing wave thermoacoustic stack, Proc. 22nd IIR International Congress of Refrigeration, Beijing (paper ICR07-A1-281), 21-26 August 2007
Saleh YM, Mao XR, Jaworski AJ 2007 Numerical simulation of oscillatory flow in thermoacoustic stack, Proc. 22nd IIR International Congress of Refrigeration, Beijing (paper ICR07-A1-278 – keynote), 21-26 August 2007
Yu Z, Jaworski AJ 2007 Study on regenerator in travelling wave thermoacoustic engines, Proc. 22nd IIR International Congress of Refrigeration, Beijing (paper ICR07-A1-279), 21-26 August 2007
Mao XA, Jaworski AJ 2007 Measurement of thermal boundary layer in a channel of parallel-plate thermoacoustic stack, Proc. 22nd IIR International Congress of Refrigeration, Beijing (paper ICR07-A1-275), 21-26 August 2007
Mao XA, Yu Z, Jaworski AJ 2007 Oscillating flow in a parallel-plate stack in a standing wave thermoacoustic resonator: PIV measurements within the entrance region, International Congress on Ultrasonics, Vienna, April 9 - 13, 2007, Session R24: Thermoacoustics
Mao X, Marx D, Jaworski AJ 2005 PIV Measurement of Coherent Structures and Turbulence Created by an Oscillating Flow at the End of a Thermoacoustic Stack, Proc. iTi Conference in Turbulence, Bad Zwischenahn, Germany, 25-28 September (in "Progress in Turbulence II”, ed. Oberlack M et al, Springer Proceedings in Physics, 109, 99-102, 2007; ISBN 978-3-540-32602-1)
Watson M, Jaworski AJ and Wood NJ 2004 The application of synthetic jet actuators for modification of the characteristics of separated shear layers,Proc. 7th Biennial ASME Conference – Engineering Systems Design and Analysis ESDA-2004; paper number ESDA2004-58561; Manchester, UK, 19-22 July 2004
Meng G, Jaworski AJ, Dyakowski T, Hale JM and White NM 2004 Investigations of heterogeneous mixtures with dual-modality transducers fabricated using thick-film technology, Proc. 7th Biennial ASME Conference – Engineering Systems Design and Analysis ESDA-2004; paper number ESDA2004-58570; Manchester, UK, 19-22 July 2004
Jaworski AJ, Dyakowski T and Davies GA 2001 Smart sensing techniques for improving efficiency of industrial processes, (paper invited by ASME),Proceedings of Engineering Technology Conference on Energy ETCE-2001, Houston, TX, USA, 5-7 February
Jaworski AJ, Dyakowski T and Davies GA 1998 Application of capacitance sensors for monitoring oil-water separation processes, Proc. ASME Heat Transfer Division, HTD 361-5, 429-37 (IMECE’98, November 15-20, Anaheim, California, USA)
Jaworski AJ, Harvey JK and Mabey DG 1996 Experimental Studies of the Unsteady Characteristics of Vortex Breakdown, Proc. Royal Aeronautical Society, Unsteady Aerodynamics, 17-18 July, London, pp 15.1-15.13
Conference Publications (Other)
Mohd Saat FAZ, Jaworski AJ, Mao X and Yu Z 2012 CFD modelling of flow and heat transfer within the parallel plate heat exchanger in standing wave thermoacoustic system, Proc. 19th International Congress on Sound and Vibration, 8-12 July, Vilnius, Lithuania
Saechan P, Yu Z and Jaworski AJ 2012 Design and experimental evaluation of a travelling wave thermoacoustic cooler driven by a standing wave thermoacoustic engine, Proc. 19th International Congress on Sound and Vibration, 8-12 July, Vilnius, Lithuania
Abdoulla KOA, Yu Z and Jaworski AJ 2012 Design of a low-cost two-stage thermoacoustic electricity generator for rural communities in developing countries, Proc. 19th International Congress on Sound and Vibration, 8-12 July, Vilnius, Lithuania
Kamsanam W, Mao X and Jaworski AJ 2012 Heat Transfer Performance of Finned-Tube Thermoacoustic Heat Exchangers in Oscillatory Flow, Proc. 19th International Congress on Sound and Vibration, 8-12 July, Vilnius, Lithuania
Yu Z and Jaworski AJ 2012 Demonstrator of a combustion driven thermoacoustic electricity generator for remote and rural areas of developing countries, Proc. 19th International Congress on Sound and Vibration, 8-12 July, Vilnius, Lithuania
Mao X and Jaworski AJ 2012 Experimental study of heat transfer from plain fins in oscillatory flow – a microscopic view of heat exchange processes in thermoacoustic devices, Proc. 19th International Congress on Sound and Vibration, 8-12 July, Vilnius, Lithuania
Mao XA, Shi L and Jaworski AJ 2009 Non-dimensional parameters controlling the behaviour of oscillatory flows around stacks of parallel plates in thermoacoustic devices, Proc.16th International Congress on Sound and Vibration, 5-9 July, Krakow, Poland
Shi L, Yu Z and Jaworski AJ 2009 Vortex formation at the end of the parallel-plate stack in the standing-wave thermoacoustic device, Proc.16th International Congress on Sound and Vibration, 5-9 July, Krakow, Poland
Shi L, Yu Z and Jaworski AJ 2009 PLIF measurement of the time-resolved temperature field distribution around the fins of a thermoacoustic heat exchanger in oscillatory flow, Proc.16th International Congress on Sound and Vibration, 5-9 July, Krakow, Poland
Yu Z, Abduljalil ARS and Jaworski AJ 2009 Construction and testing of a steel-wool regenerator within a looped travelling-wave thermoacoustic engine, Proc.16th International Congress on Sound and Vibration, 5-9 July, Krakow, Poland
Yu Z, Mao XA and Jaworski AJ 2009 Acoustic-electric characterisation of loudspeakers for low-cost thermoacoustic electricity generators, Proc.16th International Congress on Sound and Vibration, 5-9 July, Krakow, Poland
Shi L, Yu Z and Jaworski AJ 2009 PLIF measurement of instantaneous temperature field within thermoacoustic heat exchangers, Proc. 2009 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Albuquerque, NM, 1-4 June
Abduljalil ARS, Yu Z and Jaworski AJ 2009 Performance studies of travelling-wave thermoacoustic engine for selected low-cost regenerators, Proc.2009 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Albuquerque, NM, 1-4 June
Mao XA, Shi L, Yu Z and Jaworski AJ 2009 Investigations of Flow Morphology around Thermoacoustic Parallel-Plate Stacks and Heat Exchangers,Proc. 2009 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Albuquerque, NM, 1-4 June
Abduljalil ARS, Yu Z and Jaworski AJ 2008 Construction and performance characterisation of the low-cost regenerators for travelling-wave thermoacoustic engines, 7th EUROMECH Fluid Mechanics Conference, September 14-18, Manchester, UK
Shi L, Yu Z and Jaworski AJ 2008 Investigations of vortex shedding processes at the end of parallel-plate stack in the oscillatory flow, 7th EUROMECH Fluid Mechanics Conference, September 14-18, Manchester, UK
Jaworski AJ, Dyakowski T and Doby M 2006 Transition between "Clusters" and "Stratified" Flow Regimes in the Pneumatic Conveying System - Gas Flow Driven Granular Jump, 5th World Congress on Particle Technology, Orlando, Florida (USA), April 23-27, 2006
Jaworski AJ, Dyakowski T, Meng G and Kimber J 2004 Measurements of oil-water separation dynamics in the primary separation systems, Proc. Advances in Multiphase Separation and Multiphase Pumping Technologies (National Engineering Laboratory Seminar), Aberdeen, UK, 30 June - 1 July 2004
Watson M, Jaworski AJ and Wood NJ 2004 An investigation into the use of synthetic jets for the control of surface unsteadiness in separated flows, Proc. 2nd AIAA Flow Control Conference (AIAA-2004-2212); Portland, Oregon, US, 28 June - 1 July
Sankowski D, Mosorov V, Grudzien K, Plaskowski A and Jaworski AJ 2003 Using Functional Analysis for Understanding Complex 3D Processes,Proc. 3rd World Congress in Industrial Process Tomography, Alberta, Canada, 2-5 September
Dyakowski T, Mosorov V, Sankowski D Seaton M, Mazurkiewicz L, Grudzien K and Jaworski AJ 2003 Virtual Channel Concept for Measuring Solids Mass Flow Rate, Proc. 3rd World Congress in Industrial Process Tomography, Alberta, Canada, 2-5 September
Hale JM, Dyakowski T, Jaworski AJ, White NM and Harris NR 2003 A Sensor System for Oil-Water Separators: Materials Considerations, Proc. Sensors and their Applications XII, University of Limerick, Ireland, 2-4 September
Dyakowski T, Hale JM, Jaworski AJ, White NM, Harris NR, Meng G, Nowakowski A and Rwifa S 2003 Characterisation of heterogeneous mixtures by using thick-film ultrasonic transducers, Proc. 3rd World Congress in Industrial Process Tomography, Alberta, Canada, 2-5 September
Watson M, Jaworski AJ and Wood NJ 2003 The Development of Synthetic Jets for Enhanced Control of Separated Flows, AIAA Paper 2003-3716, 33rd AIAA Fluid Dynamics Conference and Exhibition, Orlando, Florida, 23-26 June 2003
Watson M, Jaworski AJ and Wood NJ 2002 An experimental study of synthetic jet actuators with multiple and rectangular orifices in quiescent conditions. Proc. CEAS Aerospace Aerodynamics Research Conference, 10-12 June 2002 – Cambridge, UK
Dyakowski T and Jaworski AJ 2002 Investigations of transport modes in dense pneumatic conveying, Proc. 4th World Congress on Particle Technology, 21-25 July 2002, Sydney, NSW, Australia (ISBN 0858257947)
Jaworski AJ and Dyakowski T 2001 Tomographic measurements of solids mass flow in dense pneumatic conveying. What do we need to know about the flow physics? Proc. 2nd World Congress on Industrial Process Tomography – Hannover, Germany 29–31 August (ISBN 0 85316 224 7) <PDF>
Jaworski AJ and Dyakowski T 2001 Investigations of flow instabilities within the dense phase pneumatic conveying system, Proc. 4th International Conference on Multiphase Flow, 27 May – 1 June, 2001, New Orleans, Louisiana, USA
Jaworski AJ and Dyakowski T 2001 Application of electrical impedance spectroscopy for measurement of the composition of oil-water mixtures, Proc. 4th International Conference on Multiphase Flow, 27 May – 1 June, 2001, New Orleans, Louisiana, USA
Dyakowski T and Jaworski AJ 2000 Application of tomographic techniques for imaging fluidized beds, Proc. 3rd Israeli Conf. for Conveying and Handling of Particulate Solids, Israel, The Grand Nirvana Hotel, Dead Sea, May 29 – June 1
Jaworski AJ, Dyakowski T and Davies GA 2000 Smart Sensors for Controlling Oil-Water Separation Processes, Proc. 2nd North American Conference on Multiphase Technology, pp. 355-368 (Eds. Gregory GA and Redus C, BHR Group Ltd), Banff, Canada 21-22 June
Jeanmeure LFC, Zimmerman WBJ, Dyakowski T, Jaworski AJ and Davies GA 1999 An algorithm based on perturbation theory for electrical capacitance tomography, Proc. 1st World Congress on Industrial Tomography, Buxton, UK, April 14-17, pp. 184-188
Jaworski AJ, Dyakowski T and Davies GA 1999 A portable capacitance probe for detection of interface levels in multi-phase flows – a case study, Proc. 1st World Congress on Industrial Tomography, Buxton, UK, April 14-17, pp. 289-296
Jaworski AJ, Dyakowski T and Davies GA 1998 Development of the capacitance techniques for monitoring oil-water separation processes, Proc. 9th International Symposium on System – Modelling – Control, April 27 – May 1, Zakopane, Poland
Edited Works - Book Chapters
Jaworski AJ and Ja’fari M 2023 Thermoacoustic Engines (Section 4.2, pp. 228-266) in Power generation technologies for low-temperature and distributed heat, Edited by Markides CN and Wang K, Publisher: Elsevier
Dyakowski T and Jaworski AJ 2005 Multiphase Flow Measurements, in Process Imaging for Automatic Control, CRC Press / Taylor & Francis, Boca Raton, Florida, USA, Chapter 9, pp. 299-332, eds. Scott DM, McCann H.
Dyakowski T and Jaworski AJ 2001 Application of non-invasive techniques for imaging fluidized beds – A review, in Handbook of Conveying and Handling of Particulate Solids, Elsevier Science B.V., Amsterdam, The Netherlands, Chapter 10.2, pp. 807-824, eds. Levy A and Kalman H
Patents
Jaworski AJ, Hale JM, Dyakowski T and White NM 2009 Pressure Wave Piezoelectric Sensor, United States Patent US 7,499,377 B2 (March 3, 2009), The University of Manchester, The University of Newcastle, The University of Southampton <LINK>
Warsop C, Wood NJ, Jaworski AJ and Watson M 2006 Method of Controlling Vortex Bursting, World International Property Organization, WO/2006/027630 (March 16, 2006), BAE Systems <LINK>
Dyakowski T, Hale JM, Jaworski AJ and White NM 2006 Pressure Wave Piezoelectric Sensor, European Patent EP 1 660 854 A0 (May 31, 2006), The University of Manchester, The University of Newcastle, The University of Southampton <LINK1>, <LINK2>
Davies GA, Dyakowski T and Jaworski AJ 2004 Flow control system, European Patent EP 1 012 678 B1 (March 31, 2004), University of Manchester Institute of Science & Technology <LINK1>, <LINK2>
Davies GA, Dyakowski T and Jaworski AJ 2002 Sensor Array for Detecting Electrical Characteristics of Fluids, United States Patent US 6,419,807 B1 (July 16, 2002), University of Manchester Institute of Science & Technology <LINK1>, <LINK2>
Theses
Jaworski AJ 1996 A study of pressure fluctuations caused by vortex breakdown PhD thesis, Imperial College of Science, Technology and Medicine, London
Jaworski AJ 1991 Analysis of heat transfer processes in a “low-flow” flat-plate liquid heating solar collector – MSc thesis, Warsaw University of Technology (in Polish)