HP DeskJet 3512 Setup

HP DeskJet 3512 is a highly affordable all-in-one printer that offers you various features and allows you to print virtually from anywhere and enjoy outstanding results. This is an Energy Star Certified printer that saves energy and conserves resources. It is a user-friendly printer that can be used for both home and official work. HP DeskJet 3512 also allows its users to print wirelessly. To access all its features, it’s essential to set up the printer first. Here you’ll find a complete guide on the printer setup.

HP DeskJet 3512 Printer Setup:

Here are the steps mentioned below, following which you can complete the setup process.

1. First and foremost, make sure that you stack the paper in the input tray.

2. Now, install HP DeskJet 3512 Ink Cartridge and remove all the tape and packing materials from the printer device.

3. Now, keep your printer on the flat surface and then connect one end of the cord to the back end of the printer, and the other end should be connected to the power outlet.

4. Then, you need to open the paper input tray and adjust the HP DeskJet 3512 Ink and place the load of 10-20 sheets of paper and adjust the paper width guide until it gets adjusted with the paper.

5. Then, gently remove the tape to get the ink cartridge out of the paper package.

6. Now, lift the ink cartridge door and place the ink cartridge in the respective slots.

7. Close the cartridge access door, and place the alignment page at the right-front corner of the scanner glass.

8. Lastly, press the Start copy black button in order to align the cartridges.

Your printer has been set up successfully.

HP DeskJet 3512 Wireless Setup

HP DeskJet allows printing wirelessly, eliminating the use of cables and wires. To carry out your printing tasks, you need to complete the HP DeskJet 3512 wireless setup. To Connect HP DeskJet 3512 Printer to WiFi, follow the steps mentioned below.

1. First and foremost, make sure that you are using the latest version of the HP DeskJet 3512 driver; in case you don’t have the latest version, you can also download it from the official website of HP.

2. Now, check whether the HP DeskJet 3512 driver is supported by the operating system version.

3. Next, switch on the printer and the computer and ensure that both the printer and the computer share the same network.

4. After that, download the HP DeskJet 3512 printer software from the CD that comes along with the printer. If not, download it from the HP official site.

5. Follow the on-screen instructions properly to complete the installation process and ensure that you have selected the correct connection type.

6. Connect the printer to the computer using the wireless network.

7. Now, use the USB cable only when you are asked to do so. Then, retrieve the network settings and make a USB connection between HP DeskJet 3700 printer and computer.

8. Now, connect your printer to the network over 2.4 GHz and connect your printer to the device to complete the HP DeskJet 3512 Setup.

That was all about how you can perform the HP DeskJet 3512 setup. If you face any problems during the setup process, you can refer to HP DeskJet 3512 Printer Manual to get the problem fixed.

Read Related Blogs: -

How to Connect HP DeskJet 3700 Printer to WiFi

How to Connect HP Deskjet 2652 to wifi