Cub Cadet might be renowned for their cutters, however the organization additionally makes utility vehicles, snow hurlers and pretty much any little motor contraption one would requirement for yard mind, including pressure washers. Utilized with the right spouts, a pressure washer can clean any outside surface from cement to siding and even autos.
In spite of the fact that Cub Cadet's pressure washer models are gone for the private market, that doesn't mean they held back on development. These washers utilize modern quality AAA Triplex pumps with PowerBoost, a patent-pending Venturi stream plan that lessens drawing misfortunes for more pressure with less motor influence. The wand is associated with the pump utilizing Simpson Monster Hoses which utilize an internal polyester layer fortified with metal covered steel plait that is ensured with an unmistakable external covering. These hoses utilize a snappy interface framework these makes stockpiling and support a snap.
Cub Cadet pressure washers can be utilized with straight water, or cleanser can be mixed into the stream utilizing the inherent siphon tube and channel. Every unit accompanies 5 stainless steel-tipped spouts for anything from delicate soaping to impacting.
Cub Cadet has three models in their lineup, each with an extraordinary motor and set of components. Every one of the three engines meets EPA and CARB discharges prerequisites, so these washers can be acquired in each of the 50 states. Cub Cadet covers these items with a three year constrained private guarantee.
This pressure washer is controlled by Cub Cadet's own particular overhead valve 208cc motor, a plan demonstrated in the organization's snow hurlers, tillers and wood splitters. With this engine, the pump can push up to 2.4 gallons of water for each moment through the spout at pressures achieving 3,200 PSI. The spout is associated with the pump by means of a 5/16 inch x 25 foot hose. The pump and motor are mounted on a 13″ flat truck sitting on a couple of 10″ 4 utilize pneumatic tires mounted to steel center points, making it simple to roll wherever it should be utilized.
CC3425
This model has every one of the elements of the CC3224, however it replaces the Cub Cadet motor with a 5.5 hp Honda GX200. This engine highlights a multi-chamber fumes framework, fashioned crankshaft, unbending crankcase, helical cut apparatuses and a propelled air allow all assistance monitor commotion. Beginning is simple on account of a computerized decompression framework that keeps the fumes valve open until the point when the engine is running.
The engine builds draw yield to 3,400 PSI and 2.5 GPM. Pressure can be balanced utilizing the Simpson Dial 'n Wash pressure controller, and a side help handle makes the spout simpler to control.
CC4033
The most effective pressure washer in Cub Cadet's lineup is fueled by a 8.5 hp Honda GX270, bringing pressure up to 4,000 PSI, enough to move 3.3 GPM. It has an indistinguishable programmed decompression framework from the GX200, and an extraordinary admission and fumes configuration cuts commotion by 5 db. To oblige the motor, the truck is 1.5 inches longer and is mounted to 13 inch tires.
The additional power likewise enables this washer to conquer more liquid contact, so Cub Cadet has incorporated a 50 foot hose. Like the CC3425, it accompanies a side-help handle and Dial 'n Wash pressure controller.
Where to Buy Cub Cadet Pressure Washer Parts
Considering purchasing a Cub Cadet pressure washer, yet not certain about keeping it kept up?