Presetta switches the presets of your car audio processor from your iPhone, a Home Screen or CarPlay widget, and Siri.
Sennuopu HIFI X12 processor with its Bluetooth module.
iPhone with iOS 26 or later. Widgets in CarPlay need iOS 26 and a touchscreen car display.
Presetta only switches between presets already stored in the processor. It never changes their settings.
Switch only to presets your installer has set up. An empty preset has no crossover filters and may send full-range signal to the tweeters, which can damage them at volume. Mark the presets that are set up in Presetta → Edit presets; the others stay disabled.
Presetta can't find my processor.
Close the manufacturer's WeChat mini-program: the processor accepts only one Bluetooth connection at a time. Turn the car on so the processor has power, then tap Find X12 again.
The WeChat mini-program can't connect.
While "Stay connected" is on, Presetta holds the connection. Turn it off in Settings, or close Presetta in the app switcher.
A preset button is dimmed.
It isn't marked as set up. Turn it on in Edit presets if your installer has set it up.
"Untested processor" message.
Your processor reports a firmware version that hasn't been tested with Presetta. Write to us with the firmware shown in Settings → About.
Siri phrases.
"Presetta M2", "Switch Presetta to Highway" (your preset name), "DSP preset M3".
If something doesn't work, include your processor model, the processor firmware (Settings → About) and the connection log (Settings → About → Connection log → Copy).