Ghillie suits

Your arms are hanging over the edge, but my board here is a bit small, so I have to do one side at a time, but if I go into the grid itself, you know were using 550 Paracord, youre just normal Milspec paracord and but it does have those white on the inside of this white eddy string or whatever you want to call it, but its just extra weight, so we just pull it out and get rid of it, so you’ll do this with every piece of Paracord, that you put down first

We will take this and we'll go from the top of the neck until the end of your sleeve or cuff and now, when we lie down Right there, now we go through and lay down. Ive already done that, so I have my back rights. My upper horizontal is my back horizontal and my vertical is all that's intended for this jacket itself. And you may also just lay it out, cut it , then you may be able to go into the steps as you put it together Well do here, Ill put out the arm , then well lay out the grid, but then well get those pins take and we'll nail them down.

Where it'll be the right jacket for the season, or you're trying to find something to make a Ghillie multi season suit out of it'll be a completely customizable thing at the end of the day, but its just a starting point where You want to start, and you don't have to purchase, you could take a garment out of your closet, whatever your wifes girlfriend you know your husband the way you did you could turn that into a ghillie suit , then it could not be her anymore I trust some of those so well go right back or start making this grid now and well show you step by step our procedure. I make this whole Ghillie suit customizable to your needs. 1st, Ill do your grid. Ill take that. Its just a part of insulation board cardboard a part of wood, whatever you have laying ar and Im just doing that so you may be able to really put the jacket pretty and large, and it gives you a better flat lay than a smaller table and.

Where you want these to stay, and I like to use this insulation, particularly because the pins fit right in there and yes, youll put some holes in your garment, but get a pin thats small enough. Well do that and interpret everything , then show you the gluten procedure.

Your afterward steps in the procedure won't be disassembled, so be sure you attach the glue nicely and attach it to the fabric. Take your time, you don't have to rush to make it nice and tidy, so weve just finished our complete grid. It took about a day, you just have to lay it out and you have to make a custom grid for each garment. Thats how we intended it. We have the back of the full lattice. I have the arm, we have the right arm full lattice on both sides, but since we did lots of bowing with it, we kept the lattice from the left arm on the inside, and so you could do what you wanted with your Ghillie suit, it all depends on your individual needs, but we’ll start putting it all on and actually make the Ghillie suit look like a real Ghillie suit, but this is a step you can not really skip because you have this and it has to have power to hold on to what you are We start with the burlap and then we can use it With some jute we can also use hemp ropes. You just want to buy a few different colors for us to do it.

now youve laid out your grid, so to speak. I finished half of it, now you put it on and now you get the e6000 sticky. If you pin it down at any point in any cross part, you may be able to put the glue on better and let it stuff on the real fabric and now well work it through and well start to glue it. Were going to start down here and you put some glue on that thing you push through that thing when it really comes out and you lay it down and glue it together and now you may be able to push your needle in there, put the glue well there and place, Now we'll go through each cross part and glue, it'll take a minute, but its good that its worth making sure that your glue will hold there then. From https://preplobby.blogspot.com/