Motorcycle Springer Fork
Motorcycle Springer Fork
Embedded Files
A motorcycle fork connects a motorcycle's front wheel and axle to its frame, typically via a yoke, also known as a triple clamp, which consists of an upper yoke joined to a lower yoke via a steering stem, a shaft that runs through the steering head, creating the steering axis.
A motorcycle fork connects a motorcycle's front wheel and axle to its frame, typically via a yoke, also known as a triple clamp, which consists of an upper yoke joined to a lower yoke via a steering stem, a shaft that runs through the steering head, creating the steering axis.
Most forks incorporate the front suspension and front brake, and allow the front wheel to rotate about the steering axis so that the bike may be steered. Most handlebars attach to the top clamp in various ways, while clip-on handlebars clamp to the fork tubes, either just above or just below the upper triple clamp.
Most forks incorporate the front suspension and front brake, and allow the front wheel to rotate about the steering axis so that the bike may be steered. Most handlebars attach to the top clamp in various ways, while clip-on handlebars clamp to the fork tubes, either just above or just below the upper triple clamp.
Rendered Images of Springer Fork model.
3D model of Springer Fork
I have developed this 3D model with the assistance of a 2D drawing available online. The process was bottom to top, where I started with the wheel and moved up to design every part individually before assembling them together. I have used Solidworks for the process and used Keyshot for the realistic rendered image.
SPRINGER FORK.PDFDetailed drawing of Springer Fork describing various components.
Page updated
Google Sites
Report abuse