WS2 Dry Lube | cdn11.bigcommerce.com
It is a common belief that use of WS2 can help in increasing your business profitability in the longer run. The popular name of the same is Tungsten Disulfide and it is available in the form of solid and dry lubricant powder. The powder is known for delivering the kind of unmatched substance and it can be the Graphite or Molybdenum Disulfide. In short it is known as (MoS2). The same can even be used for the high temperature and the high pressure applications. It will also offer the kind of temperature resistance at the range of -450 deg F (-270º C) to 1200 deg F (650º C). This can happen in the normal ambiance and with the range of -305 deg F (-188º C) to 2400º F (1316º C) in form of vacuum.
Traits of the WS2 Dry Lube
Here you have the ability to use the kind of coated film and things are extremely high at the level of 300,000 PSI. You have the form of WS2 Dry Lube and you can use this in place of Molybdenum Disulfide (MoS2). You can see the comparison chart here and you have more things to see and accomplish. The kind of solution can offer the lowest kind of coefficient friction. In the case the applications are limitless and you can try things with the conceivable notion.
Using Power the Right Way
You can use the solution and mix the powder with the wet lubricants like grease, oil and the synthetic lubricants. The powder can be well mixed with the oil or the grease and this will help in enhancing the lubricity of the level of mixture. The same can also help in enhancing the extreme pressure and the high temperature traits and properties. At the time of using WS2 in the mixture will help things get coated in matters of mating and moving the parts. It is something that can help in reducing the level of friction.
Traits of the WS2
The WS2 Dry Lube will help in improving the lubricity and the load bearing ability for a longer time span. It can also help in coating the powder in the process of spraying the substrate with the dry and the cool pneumatic air. It does not need the binders and the same can happen in the usual room temperature. You have the coated film and it is 0.5 micron thick. It is the alternative application process and here the powder can even be used by mixing things with the Isopropyl alcohol and rest of the things.
The thing will form the kind of paste and it can be buffed to the level of substrate. The kind of coating application is highly established in several areas like the racing car engine, the automotive parts, and rest of the parts and the bearings.