POISE COURSE CONTENT

 INSTRUMENTATION AND FIELD INSTRUMENTATION CALIBRATION- 

POISE is a fast growing Process Instrumentation training company, we have well trained personnel and sophisticated equipment which guarantees our clients 24/7 services in the areas instrument specification, instrument hook-up and tie-in and commissioning. Some of our services includes: 

Content:

• Process Instrumentation diagram (PFD, P&ID, PEFS)

• Field Instrument identification and calibration

• Re-certification and Re-validation of instruments

• Pump Installation, maintenance and Commissioning

• compressor Installation, maintenance and Commissioning

• Valve Installation, maintenance and Commissioning.

POWER AUTOMATION, MARSHALING TERMINATION AND SYSTEM CONTROL RELAY PROTECTION-

. POISE offers Power control System Design both at the FEED and Detail Engineering stages for standard EPC projects training. Our service coverage spans the Oil and Gas, Energy and Manufacturing Industries. Our compliance to the standard necessitates our conformance to IEC, IEEE and NFPA standards. We carry out Protective Device Coordination and control panel troubleshooting to produce FEED and Detailed Engineering deliverables including but not limited to:

Content;

• Single Line Diagrams

• Motor controls DOL, STAR-DELDA (24Vdc, 230Vac and 415Vac) contactor applications.

• Electrical control panel BOM Consumers List

• Equipment Specification and Datasheet

• Design and Material installation panel

• Control marshaling panel wiring.

• PLC wiring and control panel installation.

PROCESS INDUSTRIAL AUTOMATION AND SCADA GRAPHICS CONTROL- 

POISE offers you Automation and SCADA graphic systems training which are heavily utilized in various industries. We take a standards-based approach when preferring solutions to our clients. This ensures that we deliver fit-for-purpose and cost-effective systems both on training and services. Our training services cover the entire project lifecycle as the control system project proceeds from Pre-FEED all the way to commissioning and startup.

Content;

• Process Automation Systems and PLC application programming.

• Supervisory Control and Data Acquisition Systems (SCADA) integration to PLC programming.

• Safety Instrumented Systems integration

• SCADA Fire and Gas Safety Systems

• SCADA Automatic Protection Systems to controls panel (24Vdc and 230VdcV) on relays.

• SCADA Pump and Compressor Application

OIL AND GAS FLUID METERING AND FLOW-METER PROVING CALIBRATION- 

POISE course will introduces participants to a different flow measurement technologies and systems that are used custody transfer applications, and gain a full comprehension about how measurement systems can work properly and accurately.

– These include turbine meters, positive displacement meters, Coriolis flow measurement, Magnetic and ultrasonic flow measurement.

– Participants will gain the skills to determine if a metering system is adequate for the purpose, select appropriate systems and identify potential problems.

– Other key learning objectives of this course include the comprehending the principles and applications of Multiple meters/meter runs, Flow computers, Quality systems, Calibration, Meter Runs, Proving and Supporting Automation.

Content;

• FISCAL METERING

• CUSTODY METERING

General Characteristics and Performance of Flow-Meters

• System Characteristics.

• Flow range and viscosity range

• Performance.

• Accuracy.

• Stability and Repeatability.

• Sensitivity.

• Linearity

• Reliability.

• Applications and Usage.

• Sizing.

• Calibration.

Types and Applications of Flow-Meters

– Systems, Operating Principle, Performance, Properties, Characteristics, Uses and Applications, Installation, Calibration.

Positive Displacement (PD) Flow Meters

• Turbine Flow Meters

• Ultrasonic Flow Meters

• Magnetic Flow Meters

• Coriolis Flow Meters

Flow Measurement systems and other considerations

• Meter Factor.

• Meter Runs and report calculation.

• Proving Systems, Master Meter, slave meter

• Quality Systems (Gas Chromatographs and Sampling Systems)

• Custody Transfer Skids.

• Flow Computers and Field Communication.

• Temperature and Pressure Measurements.

FLUID CONTROLS PNEUMATIC-HYDRAULICS ELECTRO-MECHANICAL AUTOMATION- 

POISE provides an excellent practical introduction to hydraulics and pneumatics, this course provides instruction in safety, circuitry, componentry, design, construction and fault finding. Instruction takes place both in the classroom and in Seta’s state-of-the-art workshop facilities.

This course is ideally suited to those with little or no hydraulics or pneumatics experience.

CONTENT

• Safety relevant to hydraulics and pneumatics

• Interpretation of hydraulic and pneumatics drawing and symbols

• Hydraulic and pneumatics circuits - components: pumps; pipe lines; filtration; cylinders; valves; and control mechanisms

• Circuit design - theory and practice of sequence control

• Practical circuit construction

• Fault finding on hydraulic and pneumatic circuits.

DEEP-SEA UNDER WATER REMOTE OPERATED VEHICLE ROV (ENTRY LEVEL)- 

POISE designed this course to take personnel who meets the minimum requirements and give them the outline knowledge they require to work safely and effectively in an offshore environment, whilst continuing their training to become a safe and effective member of an ROV Crew and offshore team Employers normally require ROV personnel to have a good background in electronics or hydraulics. Experience with pneumatics, plant maintenance, electrical or mechanical engineering may also be of interest to prospective employers. Candidates who do not have formal qualifications (academic, trade or in the armed forces) in one of these areas are unlikely to be considered.

Content;

• Electricity

• Electronics

• Fiber Optics

• Hydraulics and fluid panel

• Pneumatic and fluid panel

• Cable and Connectors

• ROVs and History

• ROV Safety

• Top scanner and bottom scanner

• ROV Operations.

SUBSEA/SURFACE INSTRUMENTATION FOR OFFSHORE OPERATIONS (ENTRY LEVEL) 

OILAND GAS TRINING AFRICA is an international subsea- surface competence based trainer with technical manpower supply & engineering consulting company, with proven competence in delivering results to client’s satisfaction. Our extensive experience on training below. 

Content;

• Floating Production Storage & Offloading (FPSO) unit.

• Jack-up, Drilling Units, Drill-ships.

• Risers and Pipelines

• Drilling & Well Completions operations.

• Christmas tree and BOP operations.

• Subsea Production and Flow Assurance.

• Optical fiber operations

• Automation console panel

• Supervisory control and data acquisition (SCADA).

TECHNICAL INSPECTION SPECIALIST OIL AND GAS FLOW-STATIONS QHSE-QAQC SIL LEVEL 1, 2 & 3- 

This course is designed for those needing to learn what SIS are, and especially those wanting to learn how to verify SIL design and install and validate SIS/SIL. The course workshops focus mostly on SIL verification and design. Those who may benefit from this course include: Managers – Operations, Safety. Project, Engineering, and Technical Managers. Engineers – Instrumentation, Electrical, Process, Safety, and Mechanical. Technicians/Specialist – instrumentation. PSM Coordinators and Managers.

Content:

• The concept of Random Hardware Failures Assessment in the context of the requirements of IEC 61508 and IEC 61511

• The concept of a Safety Instrumented Function with respect to its functionality and its performance

• Safety Integrity and Safety Integrity Level (SIL)

• The concept of failure rate and diagnostics

• Criticality of defining Failure modes

• Modes of operation and associated Target Failures Measures

• The concept of Probability of Failure on Demand (PFD) and Probability of Failure (PFH) when assessing random hardware failures

• The concept of Hardware Fault Tolerance (HFT) and Safe Failure Fraction (SFF) when assessing Architectural Constraints

• Reliability techniques using Reliability Block Diagrams (RBDs) and Fault Tree Analysis (FTA)

• Accounting for Common Cause Failures when assessing sub-systems with redundancy

• Criticality of choosing appropriate Failure Rate Data

• Impact of proof testing and partial testing on the failure measure.

PROCESS AUTOMATION SPECIALIST QHSE-QAQC OPERATIONS-

At the end of this course, participant holistic approach to Totally Integrated Automation paves the way for better production: faster, more flexible, and more intelligent. This, in turn, is the basis for real added value in all automation tasks, particularly: • Integrated engineering • Industrial data management • Industrial communication • Industrial security • Safety Integrated. Totally Integrated Automation creates the perfect framework for strategically harnessing optimization potential – throughout the entire production process.

Content;

• Process automation with integrated safety

• Standardized and flexible safety products

• Safety Integrated for process automation

• Integrated control & safety system

• Complete integration of the safety-instrumented system

• Safety Integrated fieldbus technology PROFIsafe

• Safety-related communication via PROFIBUS

• Safety-related communication via PROFINET

• Safe process instruments and process devices for connection to I/Os.

• Direct device interfacing via fieldbus with high safety and availability.

• Safe field instrumentation on PROFIBUS.

FIELD INSTRUMENT CALIBRATION AND TUBE INSPECTION SPECIALIST QHSE-QAQC OPERATIONS- 

POISE is a fast growing Process Instrumentation training company, we have well trained personnel and sophisticated equipment which guarantees our clients 24/7 services in the areas instrument specification, instrument hook-up and tie-in and commissioning. Some of our services on QHSH- QAQC includes:

Content;

• Field Instrument Installation and maintenance QHSH- QAQC procedure.

• Re-certification and Re-validation of instruments

• Tube Hydro Testing and Leak Testing

• Tube Installation and Commissioning

• Tube Installation for Valves and transmitters.

INDUSTRIAL SPECIALIST MEDIUM VOLTAGE (MV) -LOW VOLTAGE (LV) QHSE-QAQC OPERATIONS- 

OIL AND GAS TRAINING AFRICA offers Power control System Design both at the FEED and Detail Engineering stages for standard EPC projects training. Our service coverage spans the Oil and Gas, Energy and Manufacturing Industries. Our compliance to the standard necessitates our conformance to IEC, IEEE and NFPA standards. We carry out Protective Device Coordination and control panel troubleshooting to produce FEED and Detailed Engineering deliverables including but not limited to QHSE-QAQC operations:

Content;

• Single Line Diagrams

• Motor controls DOL, STAR-DELDA

• Electrical control panel BOM Consumers List

• Sub-station Layout and blue print interpretation.

• Equipment Specification and Datasheet

• Design and Material installation panel

• Control marshaling panel wiring.

• PLC wiring and control panel installation.

SPECIALIST QHSE-QAQC INSTRUMENTED SYSTEM OPERATIONS- 

Upon completion of this course, you will gain the following: Use checklist that you can to quickly access if your plant complies with the latest international safety standards. Walk away with a solid fundamental knowledge of IEC 61511 and IEC 61508 which you can apply immediately to your plant. Ability to comply with the IEC 61511 and IEC 61508 standards thus signifying that your company is following the best available safety practices for a process company.

Content;

• What Is a Safety Instrumented System?

• Technology Choices

• Redundancy Choices

• Field Devices and Test Intervals

Industry Guidelines, Standards, and Regulations

• IEC 61508 and IEC 61511

• Allocation of Safety Functions to Protective Layers

• Develop Safety Requirements Specification

• Installation, Commissioning, and Validation

• Operations and Maintenance

• Evacuation Procedures

• Process Control System and Alarm

• Shutdown/Interlock/Instrumented Systems (Safety Instrumented Fire and Gas (F&G) Systems).

AUTOMATION AND CONTROL PANEL SYSTEMS SPECIALIST QHSE-QAQC OPERATIONS- 

Upon completion of this course, you will gain the following: Know how to set up function safety management procedures to meet international standards and be well prepared for independent assessments. The ability to plan and integrate all stages of a safety system project. Know how Hazop studies are performed and be able to define safety system requirements during Hazop studies. Know how to allocate safety tasks to both instrumented and non-instrumented protection layers to reduce dependency on a single method of protection.

Content;

• Safety Integrity Levels

• SIL Determination Method #1 (ALARP)

• SIL Determination Method #2 (Risk Matrix)

• SIL Determination Method #3 (LOPA)

• Solid-state Systems

• Microprocessor/ Pneumatic System

• Relay Systems

• PLC (Software-based) Systems

ISSUES RELATING TO FIELD DEVICES

• Importance of Field Devices

• Sensors

• Final Control Elements

• Redundancy and Requirements for Field Devices

• Installation Concerns

• Wiring of Field Devices

SPECIALIST PROCESS INSTRUMENTATION QHSE-QAQC OPERATIONS- 

Upon completion of this course, you will gain the following: Be able to quickly estimate feasibility and costs of safety measures during Hazop studies. Take the mystery out of the IEC 61511 and 61508 Standards. Demonstrate personnel competency in the latest international standard. Gain financial advantage for your company by eliminating high installation costs. Get a practical understanding of the key sections of IEC 61511 and 61508 without wading through hundreds of pages of standards documents. Be able to determine required SIL ratings using at least 3 different methods as listed in IEC 61511 This has the potential to save costs by avoiding needlessly high specifications for your trip systems.

Content;

• Importance of Field Devices

• Sensors

• Final control Elements Redundancy

• Installation Concerns and Wiring of Field Devices

• Relay Systems and PLC (Software-based) Systems

• Process Control System and Alarm Systems

TEST INSTALLMENT A SYSTEM

• Factory Acceptance Testing (FAT)

• Validation/Site Acceptance Tests (SAT).

SPECIALIST ON-BOARD MARINE PROCESS INSTRUMENTATION AND CONTROLS QHSE-QAQC OPERATIONS- 

This course has been designed to take personnel who meet the minimum requirements and give them the outline knowledge they require to work safely and effectively in an offshore environment.

Content;

• VESSLE operations and Remote operation.

• Hydro-test operations and PSV-PRV valves

• Line pipe valve (ball, gate valve)

• Host and NPT tube sizing and installation.

• Compressors

• Pumps

Instruments:

• Level gauges

• Temperature gauges

• Pressure gauges

• Alarms

• Electrical equipment

• Electrical cable glands

• Earth connection

• Deck lighting equipment

• Electrical trunks.

SPECIALIST INSPECTION PNEUMATIC-HYDRAULIC QHSE-QAQC SYSTEMS OPERATION- 

As an excellent practical introduction to hydraulics and pneumatics, this course provides instruction in safety, circuitry, componentry, design, construction and fault finding. Instruction takes place both in the classroom and in Seta’s state-of-the-art workshop facilities.

This course is ideally suited to those with little or no hydraulics or pneumatics experience.

CONTENT

• Safety relevant to hydraulics and pneumatics

• Interpretation of hydraulic and pneumatics drawing and symbols

• Hydraulic and pneumatics circuits - components: pumps; pipe lines; filtration; cylinders; valves; and control mechanisms

• Circuit design - theory and practice of sequence control

• Practical circuit construction

• Fault finding on hydraulic and pneumatic circuits.

ESSENTIAL DRILLING ON-SHORE/OFF-SHORE AUTOMATION AND PRODUCTION OPERATIONS- 

At the end of this course students will be able to understand how the Automation systems is preferably powered from UPS supply that is connected to ESD system and will be available to the point where equipment has to be isolated (onshore/offshore operations):

Content;

• Drilling essential

• General pneumatic and hydraulic control principle to drilling and production operations.

• Drilling power systems

• ESD system control panel overview.

• Drive (VSD/VFD) system control and motor control integration.

• Controllers (PLCs) system integration to instruments and fire alarm operations.

• Monitors (SCADA) graphic controls and integrations.

ESSENTIAL DRILLING ON-SHORE/OFF-SHORE CONTROLS AND PRODUCTION OPERATIONS- 

This training shall be identified with system that requires supply directly from emergency power. These systems or part of systems shall be possible to operate independently from control systems that are not connected to UPS (no-break) onshore/offshore operations:

CONTENT:

• Drilling essential

• General pneumatic and hydraulic control principle to drilling and production operations.

• Drilling power systems

• Main power for essential and non-essential drilling systems and lighting.

• Emergency power for emergency drilling systems.

• Electric pump for well control equipment / system.

• Pumps for circulating drilling fluid at identified rate.

• Transfer pump(s) for drilling fluid DOL/FW-RV installation.

• MVLV required and maintenance complete panel design and installation.

ESSENTIAL DRILLING ON-SHORE/OFF-SHORE INSTRUMENTATION AND PRODUCTION OPERATIONS

The drilling support instrumentation (DSI) training is designed for safe handling, treating and storing of liquid fluid, bulk, sacks, big bag and liquid additives. Systems within DSI module will normally include:

CONTENT:

• Mud mixing and storage systems.

• High pressure mud system.

• Field instruments and calibrations.

• Interpretation of hydraulic and pneumatics drawing and symbols

• Hydraulic and pneumatics circuits - components: pumps; pipe lines; filtration; cylinders; valves; and control mechanisms

• Hydro-test operations

• PSV-PRV valves and Line pipe valve (ball, gate valve).

HYDRAULIC & PNEUMATIC SYSTEMS CONTROLS AND AUTOMATION- 

To provide an understanding of advanced oil hydraulic systems and components, open and closed loop hydraulic circuits and hydraulic system faultfinding processes.

Who should attend?

This course is designed for engineers, technicians, technical sales personnel, management personnel and other. Similarly-qualified people from all fields of engineering who understand the technical information listed in the Outcomes. On completion, attendees will have been given information that will enable them to understand:

✓ The operation and application of advanced hydraulic valves, pumps and motors. A range of hydraulic system drawings and the operation of the hydraulic circuits depicted in the drawings. Procedures used in hydraulic components and systems fault finding and testing.

Content;

• Pilot operated pressure control valves

• Accumulators and unloading valves

• Variable flow hydraulic pumps and controllers

• Open and closed loop circuit operation

• Fault finding procedures

• Basic hydraulic circuit analysis

• Pneumatic components and systems testing, checking and adjustment.

HYDRAULIC & PNEUMATIC SYSTEMS INSTRUMENTATION- 

To provide an understanding of oil hydraulic technology principles, components, graphic symbols and circuits.

Who should attend?

The course is designed for engineers, technicians, technical sales personnel, management personnel and other. On completion of the course, attendees will be tested and assessed for theoretical and practical knowledge and competency with respect to the information provided during the course.

Content;

• Hydraulic & pneumatic principles

• Hydraulic pumps – basic principles

• Hydraulic valves – basic principles

• Rotary and linear actuators – basic principles

• Understanding hydraulic and pneumatic fluids

• Basic hydraulic circuit design

• Air compressors – basic principles

• Pneumatic valves – basic principles

• Pneumatic conductor sizing

• Basic pneumatic circuit design.

METERING CONTROL SYSTEMS OIL AND GAS OPERATIONS- 

A high accuracy metering system requires a comprehensive, reliable and workable control system to collect and process metering data.  We trained and has designed, engineered, tested and delivered hundreds of control systems – from simple, standalone flow computers to sophisticated panels incorporating dual redundancy and the latest in supervisory systems. As you train with us on metering through control system, you will benefit from our control system engineering and project Management expertise, whatever technology you select.

Content;

• Single Line Diagrams for flow meter installation

• Motor controls DOL, STAR-DELDA for flow-meter controls.

• Design and Material installation panel BOM

• Control marshaling panel wiring for 24Vdc field supply.

• PLC wiring and control panel installation.

Flow Measurement systems and other considerations

• Meter Factor.

• Meter Runs and report calculation.

• Proving Systems; Direct, Indirect, Master Meter, Meter under test.

• (Gas Chromatographs and Sampling Systems).

• Custody Transfer Skids.

• Flow Computers and Field Communication.

LIQUID AND GAS METERING FOR POWER STATIONS OPERTIONS- 

A high accuracy metering system requires a comprehensive, reliable and workable control system to collect and process metering data.  We trained and has designed, engineered, tested and delivered hundreds of control systems – from simple, standalone flow computers to sophisticated panels incorporating dual redundancy and the latest in supervisory systems. As you train with us on metering through control system, you will benefit from our control system engineering and project Management expertise, whatever technology you select.

Content;

• Single Line Diagrams(230Vac and 24Vdc) relay applications.

• Motor controls DOL, STAR-DELDA (230Vac and 415Vac) contactor applications.

• Electrical control panel BOM Consumers List

• Sub-station Layout and blue print interpretation.

• Control marshaling panel wiring for 24Vdc field supply.

• PLC wiring and control panel installation.

• Field Instrument calibration and maintenance

• Re-certification and Re-validation of instruments

General Characteristics and Performance of Flow-Meters

• Performance.

• Accuracy.

• Stability and Repeatability.

• Linearity.

• Reliability.

• Calibration.

Types and Applications of Flow-Meters

– Systems, Operating Principle, Performance, Properties, Characteristics, Uses and Applications, Installation, Calibration.

• Turbine Flow Meters

• Ultrasonic Flow Meters

• Magnetic Flow Meters

• Coriolis Flow Meters.

• Positive Displacement (PD) Flow Meters.

GAS TURBINE CONTROL SYSTEM AND OPERATIONS-

OIL AND GAS TRAINING AFRICA offers Gas turbine Power control System Design both at the FEED and Detail Engineering stages for standard EPC projects training. Our service coverage spans the Oil and Gas, Energy and Manufacturing Industries. Our compliance to the standard necessitates our conformance to IEC, IEEE and NFPA standards. We carry out Protective Device Coordination and control panel troubleshooting to produce FEED and Detailed Engineering deliverables including but not limited to:

Content;

• Principle operation on turbine systems.

• Gas turbine operation and applications.

Control field application

• Motor controls DOL, STAR-DELDA (230Vac and 415Vac) contactor applications.

• Electrical control panel BOM Consumers List

• Sub-station Layout and blue print interpretation MV-LV.

• Equipment Specification and Datasheet

• Design and Material installation panel

• Control marshaling panel wiring 24Vdc.

• PLC wiring and control panel installation.

GAS TURBINE AUTOMATION SYSTEM AND SCADA OPERATIONS- 

OIL AND GAS TRAINING AFRICA offers you Gas turbine systems training in automation and SCADA graphic operations which are heavily utilized in various industries. We take a standards-based approach when preferring solutions to our clients. This ensures that we deliver fit-for-purpose and cost-effective systems both on training and services. Our training services cover the entire project lifecycle as the control system project proceeds from Pre-FEED all the way to commissioning and startup.

Content;

• Principle operation on turbine systems.

• Gas turbine operation and applications.

Automation field application

• Process Automation Systems and PLC application programming.

• Supervisory Control and Data Acquisition Systems (SCADA) integration to PLC programming.

• Safety Instrumented Systems

• Fire and Gas Safety Systems

• Automatic Protection Systems to controls panel (24Vdc and 230VdcV) on relays.

• Pump and Compressor Station Automation

• Remote Monitoring/Telemetry Solutions.

GAS TURBINE INSTRUMENTATION SYSTEM AND OPERATIONS- 

OIL AND GAS TRAINING AFRICA offers you Gas turbine systems training in Process Instrumentation operations which are heavily utilized in various industries. We are fast growing Process Instrumentation training company, we have well trained personnel and sophisticated equipment which guarantees our clients 24/7 services in the areas instrument specification, instrument hook-up and tie-in and commissioning. Some of our services includes:

Content;

• Principle operation on turbine systems.

• Gas turbine operation and applications.

Automation field application

• Process Instrumentation diagram (PFD, P&ID, PEFS)

• Field Instrument calibration and maintenance

• Re-certification and Re-validation of instruments

• Pump Installation, maintenance and Commissioning

• Compressor Installation, maintenance and Commissioning

• Tube Installation for Valves and transmitters.

DESIGNS AND INSTALLATION - (OPERATOR RPROCESS FIELD INSTRUMENT MARSHALLING 24Vdc, CONTROLS AND AUTOMATION INSTALLATIONS)- 

OIL AND GAS TRAINING AFRICA offers you systems training in Process Instrumentation operations which are heavily utilized in various industries. We are fast growing Process Instrumentation training company, we have well trained personnel and sophisticated equipment which guarantees our clients 24/7 services in the areas instrument specification, instrument hook-up and tie-in and commissioning. Some of our services includes.

Content:

• Introduction to Process Instrumentation and controls.

• Process Instrumentation diagram (PFD, P&ID, PEFS)

• Field Instrument calibration and tubing.

• Instrument control panel BOM Consumers List

• Equipment Specification and Datasheet

• Single Line Diagrams and interpretation 24Vdc supply..

• Design and Material installation panel

• Instrument marshaling panel PLC wiring 24Vdc and FAT programming check.

FIELD DESIGNS AND INSTALLATION - (POWER CONTRLS RELAY INSTRUMENT MARSHALING (24Vdc) TERMINATION AND SYSTEM CONTROL RELAY PROTECTION)- 

OIL AND GAS TRAINING AFRICA offers you control systems training in Process Instrumentation operations which are heavily utilized in various industries. We are fast growing Process Instrumentation training company, we have well trained personnel and sophisticated equipment which guarantees our clients 24/7 services in the areas instrument specification, instrument hook-up and tie-in and commissioning. Some of our services includes

Content:

• Introduction to Process controls and instrumentation.

• Process Instrumentation diagram (PFD, P&ID, PEFS)

• Motor controls DOL, STAR-DELDA (230Vac and 415Vac) contactor applications.

• Electrical control panel BOM Consumers List

• Sub-station Layout and blue print interpretation MV-LV.

• Single Line Diagrams and interpretation 24Vdc supply.

• Design and Material installation panel

• Control marshaling panel PLC wiring 24Vdc and FAT programming check

FIELD DESIGNS AND INSTALLATION - (AUTOMATION INDUSTRIAL INSTRUMENT MARSHALLING AND SCADA GRAPHICS HMI CONTROL INTERFACE)- 

OIL AND GAS TRAINING AFRICA offers you Automation and SCADA graphic systems training which are heavily utilized in various industries. We take a standards-based approach when preferring solutions to our clients. This ensures that we deliver fit-for-purpose and cost-effective systems both on training and services. Our training services cover the entire project lifecycle as the control system project proceeds from Pre-FEED all the way to commissioning and startup.

Content;

• Introduction to Process Automation and instrumentation.

• Process Instrumentation diagram (PFD, P&ID, PEFS)

• Motor controls DOL, STAR-DELDA (230Vac and 415Vac) contactor applications.

• Single Line Diagrams and interpretation 24Vdc supply.

• Design and Material installation PLC and relay panel 24Vdc supply.

• Control marshaling panel PLC wiring 24Vdc and FAT programming check.

• Supervisory Control and Data Acquisition Systems (SCADA) integration to PLC programming FAT check.

DESIGNS AND SUPERVISION - TECH QHSE-QAQC (OPERATOR RPROCESS FIELD INSTRUMENT MARSHALLING 24Vdc, CONTROLS AND AUTOMATION INSTALLATIONS)- 

OIL AND GAS TRAINING AFRICA offers you TECHNICAL QHSE-QAQC training in Process Instrumentation operations which are heavily utilized in various industries. We are fast growing Process Instrumentation training company, we have well trained personnel and sophisticated equipment which guarantees our clients 24/7 services in the areas instrument specification, instrument hook-up and tie-in and commissioning. Some of our services includes

Content:

• Introduction to Process Instrumentation and controls.

• Process Instrumentation diagram (PFD, P&ID, PEFS)

• Supervision to Field Instrument calibration and tubing.

• Supervision Instrument control panel BOM Consumers List

• Supervision Equipment Specification and Datasheet

• Supervision Single Line Diagrams and interpretation 24Vdc supply.

• Supervision Design and Material installation panel.

• Supervision Instrument marshaling panel PLC wiring 24Vdc and FAT programming check.

DESIGNS AND SUPERVISION - TECH QHSE-QAQC (POWER CONTROLS RELAY INSTRUMENT MARSHALING (24Vdc) TERMINATION AND SYSTEM CONTROL RELAY PROTECTION)- 

OIL AND GAS TRAINING AFRICA offers you control systems training in Process Instrumentation operations which are heavily utilized in various industries. We are fast growing Process Instrumentation training company, we have well trained personnel and sophisticated equipment which guarantees our clients 24/7 services in the areas instrument specification, instrument hook-up and tie-in and commissioning. Some of our services includes

Content:

• Introduction to Process controls and instrumentation.

• Process Instrumentation diagram (PFD, P&ID, PEFS)

• Supervision Motor controls DOL, STAR-DELDA (230Vac and 415Vac) contactor applications.

• Supervision Electrical control panel BOM Consumers List

• Supervision Sub-station Layout and blue print interpretation MV-LV.

• Supervision Single Line Diagrams and interpretation 24Vdc supply.

• Supervision Design and Material installation panel

• Supervision Control marshaling panel PLC wiring 24Vdc and FAT programming check.

DESIGNS AND SUPERVISION - TECH QHSE-QAQC (AUTOMATION INDUSTRIAL INSTRUMENT MARSHALLING AND SCADA GRAPHICS HMI CONTROL INTERFACE)- 

OIL AND GAS TRAINING AFRICA offers you TECHNICL QHSE-QAQC Automation and SCADA graphic systems training which are heavily utilized in various industries. We take a standards-based approach when preferring solutions to our clients. This ensures that we deliver fit-for-purpose and cost-effective systems both on training and services. Our training services cover the entire project lifecycle as the control system project proceeds from Pre-FEED all the way to commissioning and startup.

Content;

• Introduction to Process Automation and instrumentation.

• Process Instrumentation diagram (PFD, P&ID, PEFS)

• Supervision Motor controls DOL, STAR-DELDA (230Vac and 415Vac) contactor applications.

• Supervision Single Line Diagrams and interpretation 24Vdc supply.

• Supervision Design and Material installation PLC and relay panel 24Vdc supply.

• Supervision Control marshaling panel PLC wiring 24Vdc and FAT programming check.

• Supervision Supervisory Control and Data Acquisition Systems (SCADA) integration to PLC programming FAT check.

SUPERVISION AND COMMISSIONING - TECH QHSE-QAQC (OPERATOR RPROCESS FIELD INSTRUMENT MARSHALLING 24Vdc, CONTROLS AND AUTOMATION INSTALLATIONS)- 

OIL AND GAS TRAINING AFRICA offers you TECHNICAL QHSE-QAQC training in Process Instrumentation operations which are heavily utilized in various industries. We are fast growing Process Instrumentation training company, we have well trained personnel and sophisticated equipment which guarantees our clients 24/7 services in the areas instrument specification, instrument hook-up and tie-in and commissioning. Some of our services includes

Content:

• Introduction to Process Instrumentation and controls.

• Process Instrumentation diagram (PFD, P&ID, PEFS)

• Supervision and commissioning to Field Instrument calibration and tubing.

• Supervision and commissioning Instrument control panel BOM Consumers List

• Supervision and commissioning Equipment Specification and Datasheet

• Supervision and commissioning Single Line Diagrams and interpretation 24Vdc supply.

• Supervision and commissioning Design and Material installation panel.

• Supervision and commissioning Instrument marshaling panel PLC wiring 24Vdc and FAT programming check.

SUPERVISION AND COMMISSIONING - TECH QHSE-QAQC (POWER CONTRLS RELAY INSTRUMENT MARSHALING (24Vdc) TERMINATION AND SYSTEM CONTROL RELAY PROTECTION)- 

OIL AND GAS TRAINING AFRICA offers you control systems training in Process Instrumentation operations which are heavily utilized in various industries. We are fast growing Process Instrumentation training company, we have well trained personnel and sophisticated equipment which guarantees our clients 24/7 services in the areas instrument specification, instrument hook-up and tie-in and commissioning. Some of our services includes

Content:

• Introduction to Process controls and instrumentation.

• Process Instrumentation diagram (PFD, P&ID, PEFS)

• Supervision and commissioning Motor controls DOL, STAR-DELDA (230Vac and 415Vac) contactor applications.

• Supervision and commissioning Electrical control panel BOM Consumers List

• Supervision and commissioning Sub-station Layout and blue print interpretation MVLV.

• Supervision Single Line Diagrams and interpretation 24Vdc supply.

• Supervision and commissioning Design and Material installation panel

• Supervision and commissioning Supervision Control marshaling panel PLC wiring 24Vdc and FAT programming check.

SUPERVISION AND COMMISSIONING - TECH QHSE-QAQC (AUTOMATION INDUSTRIAL INSTRUMENT MARSHALLING AND SCADA GRAPHICS HMI CONTROL INTERFACE)- 

OIL AND GAS TRAINING AFRICA offers you TECHNICL QHSE-QAQC Automation and SCADA graphic systems training which are heavily utilized in various industries. We take a standards-based approach when preferring solutions to our clients. This ensures that we deliver fit-for-purpose and cost-effective systems both on training and services. Our training services cover the entire project lifecycle as the control system project proceeds from Pre-FEED all the way to commissioning and startup.

Content;

• Introduction to Process Automation and instrumentation.

• Process Instrumentation diagram (PFD, P&ID, PEFS)

• Supervision and commissioning Motor controls DOL, STAR-DELDA (230Vac and 415Vac) contactor applications.

• Supervision and commissioning Single Line Diagrams and interpretation 24Vdc supply.

• Supervision and commissioning Design and Material installation PLC and relay panel 24Vdc supply.

• Supervision and commissioning Control marshaling panel PLC wiring 24Vdc and FAT programming check.

• Supervision and commissioning Supervision Supervisory Control and Data Acquisition Systems (SCADA) integration to PLC programming FAT check

more..........

Thanks,

Boms Iche +2348063354283