P. Manoj Kumar*, Muthukumar S, S.P.Gowtham, N.Harikannan, P.T.Saravanakumar, M.Venkatasudhahar, “Investigations on Solar PV for improving its efficiency through thermal management”, Proceedings of the 5th International Conference on Smart Electronics and Communication (ICOSEC 2024), Kongunadu College of Engineering and Technology, Trichy, 18-20 September, 2024.
P. Manoj Kumar*, R. Skywindurai, T. Sritharan, M. Vinothkumar, P.Michael Joseph Stalin, “Study on an indirect solar dryer for drying sliced bitter gourd using PCM”, Proceedings of the 2nd International Conference on Advances in Renewable and Green Energy Technology (ICARGET-2023), Guru Ghasidas Vishwavidyalaya, Bilaspur (C.G) in Collaboration with Universiti Kebangsaan Malaysia, 7th and 8th December, 2023.
T. Aravinth, A. Praveenvignesh, P. Manoj Kumar*, “Nano enhanced biodiesel for improving performance of a diesel engine”, Proceedings of the 2nd International Conference on Advances in Renewable and Green Energy Technology (ICARGET-2023), Guru Ghasidas Vishwavidyalaya, Bilaspur (C.G) in Collaboration with Universiti Kebangsaan Malaysia, 7th and 8th December, 2023.
C. Deepakkumar, S. Narendran, P. Manoj Kumar*, Abdulaziz Alasiri, “Study on a solar water heater performance under the influence of nanofluid”, Proceedings of the 2nd International Conference on Advances in Renewable and Green Energy Technology (ICARGET-2023), Guru Ghasidas Vishwavidyalaya, Bilaspur (C.G) in Collaboration with Universiti Kebangsaan Malaysia, 7th and 8th December, 2023.
D. Dhanush Kumar, P. Manoj Kumar*, Abdulaziz Alasiri, “Study on performance of a modified solar still”, Proceedings of the 2nd International Conference on Advances in Renewable and Green Energy Technology (ICARGET-2023), Guru Ghasidas Vishwavidyalaya, Bilaspur (C.G) in Collaboration with Universiti Kebangsaan Malaysia, 7th and 8th December, 2023.
M.Aashik, R. Gokul, P. Manoj Kumar*, “Study on a solar PV using nano-improved phase change material”, Proceedings of the 2nd International Conference on Advances in Renewable and Green Energy Technology (ICARGET-2023), Guru Ghasidas Vishwavidyalaya, Bilaspur (C.G) in Collaboration with Universiti Kebangsaan Malaysia, 7th and 8th December, 2023.
P. Manoj Kumar*, P.T. Saravanakumar, Atul Sarojwal, Rajasekaran Saminathan, D. Harikrishna, S. Jeevan Prasanth, R. Aravinth Pranav, “Experimental investigations on the performance of a single slope solar still with thermal energy storage”, Proceedings of the 2nd International Conference & Exposition on Mechanical, Material and Manufacturing Technology (ICE3MT 2022), CVR College of Engineering, Hyderabad, 28th and 29th October, 2022.
P. Manoj Kumar*, M. S. Karuna, Sureshkumar M.S, Moti Lal Rinawa, R.Sakthivel, K.Muthukumar, E. Kathir Malavan, “Evaluating the Effect of Magnesium Oxide Nanoparticles on the Thermal Energy Storage Characteristics of the Inorganic PCM”, Proceedings of the 2nd International Conference & Exposition on Mechanical, Material and Manufacturing Technology (ICE3MT 2022), CVR College of Engineering, Hyderabad, 28th and 29th October, 2022.
P. Manoj Kumar*, Prashant Chauhan, Amit Kumar Sharma, Moti Lal Rinawa, A.J. Rahul, M. Srinivas, A. Tamilarasan “Performance study on solar still using nano disbanded phase change material (NDPCM)”, Proceedings of the International Conference on Design, Manufacturing and Materials Engineering (ICDMME – 2021), Dr.N.G.P. Institute of Technology, Coimbatore, 10th and 11th March, 2022.
Nitish Kaushik, P. Saravanakumar, S. Dhanasekhar, Rajasekaran Saminathan, Moti Lal Rinawa, Ram Subbiah, Rajneesh Sharma, P. Manoj Kumar*, “Thermal analysis of a double-glazing window using a Nano-Disbanded Phase Changing Material (NDPCM)”, Proceedings of the International Conference on Design, Manufacturing and Materials Engineering (ICDMME – 2021), Dr.N.G.P. Institute of Technology, Coimbatore, 10th and 11th March, 2022.
M. Balaji, S.N. Dinesh, S. Raja, Ram Subbiah, P. Manoj Kumar, “Lead time reduction and process enhancement for a low volume product”, Proceedings of the International Conference on Design, Manufacturing and Materials Engineering (ICDMME – 2021), Dr.N.G.P. Institute of Technology, Coimbatore, 10th and 11th March, 2022.
Moti Lal Rinawa, P. Pitchandi, N. Vigneshkumar, Rajneesh Sharma, Manoj Kumar Singh, Ram Subbiah, P. Manoj Kumar*, “Experimental analysis of the metal roofed industrial building using nano-silica disbanded crude wax (NDCW)”, Proceedings of the International Conference on Design, Manufacturing and Materials Engineering (ICDMME – 2021), Dr.N.G.P. Institute of Technology, Coimbatore, 10th and 11th March, 2022.
Rajneesh Sharma, Prashant Chauhan, Amit Kumar Sharma, Atul Katiyar, Hari Kumar Singh, Moti Lal Rinawa, P. Manoj Kumar, “Characterization of ZnO/nanofluid for improving heat transfer in thermal systems”, Proceedings of the International Conference on Design, Manufacturing and Materials Engineering (ICDMME – 2021), Dr.N.G.P. Institute of Technology, Coimbatore, 10th and 11th March, 2022.
S.N. Dinesh, Rajasekaran Saminathan, Milind M. Patil, Prasad Ramchandra Baviskar, Haitham Hadidi, S. Vignesh, P. Manoj Kumar*, “Investigating the single pass baffled solar air heater (SAH) with an organic PCM (OPCM)”, Proceedings of the International Conference on Emerging Trends in Materials Science and Technology – 2022 (ICETMT 2022), CMR Institute of Technology, Bengaluru, 10th and 11th February, 2022.
P.Manoj Kumar, A.S.Abishek, Tadimarri Dinesh Kumar Reddy, Atharsh Kumar AS, “Experimental Analysis of a Heat Sink for Electronic Chipset Cooling using a Nano Improved PCM (NIPCM)”, Proceedings of the 1st International Conference on Advances in Mechanical Engineering & Material Sciences - 2022 (ICAMEMS 2022), Vellore Institute of Technology – Andhra Pradesh (VIT-AP), 22nd and 24th January, 2022.
Ramya D., Krishnakumari A., P.T. Dineshkumar, Mudit Prakash Srivastava, L. Vadivel Kannan, G. Puthilibai, P.Manoj Kumar*, “Investigating the influence of nanoparticle disbanded phase changing material (NDPCM) on the working of solar PV”, Proceedings of the 1st International Conference on Advances in Mechanical Engineering & Material Sciences - 2022 (ICAMEMS 2022), Vellore Institute of Technology – Andhra Pradesh (VIT-AP), 22nd and 24th January, 2022.
SP. Arunkumar, C. Prabha, Rajasekaran Saminathan, Jabril A. Khamaj, M. Viswanath, C. Kevin Paul Ivan, Ram Subbiah, P.Manoj Kumar, “Taguchi optimization of metal inert gas (MIG) welding parameters to withstand high impact load for dissimilar weld joints”, Proceedings of the 1st International Conference on Advances in Mechanical Engineering & Material Sciences - 2022 (ICAMEMS 2022), Vellore Institute of Technology – Andhra Pradesh (VIT-AP), 22nd and 24th January, 2022.
K. B. Prakash, P.Manoj Kumar, “Energy and Exergy Analysis on the Vapour Compression Refrigeration System with organic PCM at Condenser Side”, Proceedings of the 2nd International Conference on Advances in Materials Research - 2021 (ICAMR 2.0), Bannari Amman Institute of Technology, Sathyamangalam, 3rd and 4th December, 2021.
Sintu Kumar, S.D.Anitha Selvasofia, P.Manoj Kumar, Ram Subbiah, Rajasekaran Saminathan, Moti Lal Rinawa, P.T.Saravanakumag, G.Infant Tony Brain, Vimal Kumar Eswarlal, “Analyzing an Evacuated Tube Solar Water Heating System using Twin-Nano/Paraffin as Phase Change Material”, Proceedings of the 2nd International Conference on Functional Materials, Manufacturing and Performances (ICFMMP - 2021), School of Mechanical Engineering, Lovely Professional University, Punjab, 17th and 18th September, 2021.
P.T.Saravanakumar, SP Arunkumar, B.Brailson Mansingh, P.Manoj Kumar, Ram Subbiah, Vimal Kumar Eswarlal, “Investigating the Effect of Thermal Cycling on Thermal Characteristics of the Nano-Silica based Phase Changing Material (PCM)”, Proceedings of the 2nd International Conference on Functional Materials, Manufacturing and Performances (ICFMMP - 2021), School of Mechanical Engineering, Lovely Professional University, Punjab, 17th and 18th September, 2021.
Francis Luther King M, Putta Nageswara Rao, Sivakumar A, Vamsi Krishna Mamidi, S. Richard, Vijayakumar M, K Arunprasath, P.Manoj Kumar, “Thermal Performance of a Double-Glazed Window Integrated with a Phase Change Material (PCM)”, Proceedings of the 2nd International Conference on Functional Materials, Manufacturing and Performances (ICFMMP - 2021), School of Mechanical Engineering, Lovely Professional University, Punjab, 17th and 18th September, 2021.
S.D.Anitha Selvasofia, E.Sarojini, G.Moulica, Sajin Thomas, M.Tharani, P.T.Saravanakumar, P.Manoj Kumar, “Study on the Mechanical Properties of the Nanoconcrete using Nano-TiO2 and Nanoclay”, Proceedings of the 2nd International Conference on Functional Materials, Manufacturing and Performances (ICFMMP - 2021), School of Mechanical Engineering, Lovely Professional University, Punjab, 17th and 18th September, 2021.
D. Harikrishna, S. Harisha, P. Manoj Kumar, “Taguchi Optimization of GMAW parameters to Attain High Impact Strength of the Dissimilar Weld Joints”, Proceedings of the International Conference on Technological Advancements in Mechanical Engineering (ICTAME 2021), Academy of Maritime Education and Training (AMET), Deemed to be University, Chennai, 15th and 16th June, 2021.
P.Manoj Kumar, Alagar Karthick, S.Richard, M.Vijayakumar, P.Michael Joseph Stalin, D.Ganesh Kumar, G.Aswanth, M.Aswath, Vimal Kumar Eswarlal, “Investigating Performance of Solar Photovoltaic using a Nano Phase Change Material”, Proceedings of the International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2021), Federal Institute of Science and Technology, Angamaly, Kerala, 22nd and 23rd April, 2021. ISBN: 978-81-951626-3-5 (Page No: 36)
P.Manoj Kumar, C.Senthil Kumar, K.Muralidharan, Y.Muniratnam, K.Abraham, V.Manikandan, P.Michael Joseph Stalin, S.Jeevan Prasanth, “Augmenting the Performance of Conventional Solar Still through the Nano-Doped Black Paint (NDBP) Coating on Absorber”, Proceedings of the International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2021), Federal Institute of Science and Technology, Angamaly, Kerala, 22nd and 23rd April, 2021. ISBN: 978-81-951626-3-5 (Page No: 37)
S.N.Dinesh, S.Ravi, P.Manoj Kumar, K.Hari Ram, Alagar Karthick, P.T.Saravanakumar, R.Aravinth Pranav, “Study on an ETC Solar Water Heater using Flat and Wavy Diffuse Reflectors”, Proceedings of the International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2021), Federal Institute of Science and Technology, Angamaly, Kerala, 22nd and 23rd April, 2021. ISBN: 978-81-951626-3-5 (Page No: 64)
P.Boobalakrishnan, P.Manoj Kumar, G.Balaji, D.S.Jenaris, S.Kaarthik, M.Jaya Prakash Babu, K.Karthhik, “Thermal Management of Metal Roof Building using Phase Change Material (PCM)”, Proceedings of the International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2021), Federal Institute of Science and Technology, Angamaly, Kerala, 22nd and 23rd April, 2021. ISBN: 978-81-951626-3-5 (Page No: 65)
N.Gunasekaran, P.Manoj Kumar, S.Raja, S.Sharavanan, K.Avinas, P.Aakash Kannan, S.Gokul, “Investigation on ETC Solar Water Heater using Twisted Tape Inserts”, Proceedings of the International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2021), Federal Institute of Science and Technology, Angamaly, Kerala, 22nd and 23rd April, 2021. ISBN: 978-81-951626-3-5 (Page No: 66)
N.Vigneshkumar, M.Venkatasudhahar, P.Manoj Kumar, A.Ramesh, Ram Subbiah, P.Michael Joseph Stalin, V.Suresh, M.Naresh Kumar, S.Monith, R.Manoj kumar, M.Kriuthikeswaran, “Investigation on Indirect Solar Dryer for Drying Sliced Potatoes using Phase Change Materials (PCM)”, Proceedings of the International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2021), Federal Institute of Science and Technology, Angamaly, Kerala, 22nd and 23rd April, 2021. ISBN: 978-81-951626-3-5 (Page No: 67)
S.Vasanthaseelan, P.Manoj Kumar, R.Anandkumar, K.Hari Ram, Ram Subbiah, V.Sureshd, A.S.Abishek, R.Anith, P.Aravinth, S.V.Balaji, “Investigation on Solar Water Heater with Different Types of Turbulators”, Proceedings of the International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2021), Federal Institute of Science and Technology, Angamaly, Kerala, 22nd and 23rd April, 2021. ISBN: 978-81-951626-3-5 (Page No: 96)
M.Balaji, S.N.Dinesh, P.Manoj Kumar, R.C.Vijey Mohan, “Balanced Scorecard Approach in Deducing Supply Chain Performance”, Proceedings of the International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2021), Federal Institute of Science and Technology, Angamaly, Kerala, 22nd and 23rd April, 2021. ISBN: 978-81-951626-3-5 (Page No: 102)
S.N.Dinesh, P.Manoj Kumar, “Improving The Effectiveness Of Resource Utilization In An Engineering Institution – A Lean Approach”, Proceedings of the International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2021), Federal Institute of Science and Technology, Angamaly, Kerala, 22nd and 23rd April, 2021. ISBN: 978-81-951626-3-5 (Page No: 81)
C.Senthil Kumar, P.Manoj Kumar, S.Karthik, S.Anandaraj, D.Harikrishna, Vimal Kumar Eswarlal, “Experimental Analysis on the Inactive region of Evacuated tube Solar Collector using Twisted Tapes”, Proceedings of the International Conference on Chemical, Mechanical and Environmental Sciences (ICCMES 2021), KPR Institute of Engineering and Technology, Coimbatore, 25th and 26th March, 2021.
S. Anandaraj, N. Deepa, P. Manoj Kumar, G. Anusha, R. Gobinath, A.R. Krishnaraja, M, Harihanandh, S. Sandeep Karthick, “An Experimental Investigation of Marble Dust in Luffa Fibre Reinforced Concrete”, Proceedings of the International Conference on Chemical, Mechanical and Environmental Sciences (ICCMES 2021), KPR Institute of Engineering and Technology, Coimbatore, 25th and 26th March, 2021.
P.Michael Joseph Stalin, T.V.Arjunan, P.Manoj Kumar, N. Sadanandam, “Experimental Study on Thermal Properties of CeO2/Water Nanofluids for Heat Transfer Applications”, Proceedings of the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020), Amity School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior, 15th and 16th October, 2020.
P.Manoj Kumar, S.Arunthathi, S.Jeevan Prasanth, T.Aswin, A.Anish Antony, Deepak Daniel, D.Mohankumar, P.Nikhil Babu, “Investigation on a Desiccant Based Solar Water Recuperator for Generating Water From Atmospheric Air”, Proceedings of the 2nd International Conference on Materials, Manufacturing and Machining for Industry 4.0 (ICMMM 2.0), Bannari Amman Institute of Technology, Sathyamangalam, 9th and 10th October, 2020.
P.Manoj Kumar, D.Sudarvizhi, K.B.Prakash, A.M.Anupradeepa, S.Boomiha Raj, S.Shanmathi, K.Sumithra, S.Surya, “Investigating the Performance of a Single Slope Solar Still with a Nano-Phase Change Material”, Proceedings of the 2nd International Conference on Materials, Manufacturing and Machining for Industry 4.0 (ICMMM 2.0), Bannari Amman Institute of Technology, Sathyamangalam, 9th and 10th October, 2020. (Appreciated with BEST PAPER AWARD)
P.Manoj Kumar, D.Sudarvizhi, P.Michael Joseph Stalin, A.Aarif, R.Abhinandhana, A.Renuprasanth, V.Sathya, N.Thirukkural Ezhilan, “Thermal Characteristics Analysis of a Phase Change Material Under the Influence of Nanoparticles”, Proceedings of the 2nd International Conference on Materials, Manufacturing and Machining for Industry 4.0 (ICMMM 2.0), Bannari Amman Institute of Technology, Sathyamangalam, 9th and 10th October, 2020.
K.B.Prakash, C.Subramanian, M.Chandrasekaran, P.Manoj Kumar, S.Saravanakumar, “Develop the Mathmatical Model to Study the Effect of IAQ Parameters and Optimization using RSM”, Proceedings of the 2nd International Conference on Materials, Manufacturing and Machining for Industry 4.0 (ICMMM 2.0), Bannari Amman Institute of Technology, Sathyamangalam, 9th and 10th October, 2020.
D.Mohankumar, Shashank, Y.Pazhaniappan, RA Nithesh Kumar, R.Ragul, P.Manoj Kumar, P.Nikhil Babu, “Computational Study of Heat-Transfer in Extended Surfaces with Various Geometries”, Proceedings of the 2nd International Conference on Materials, Manufacturing and Machining for Industry 4.0 (ICMMM 2.0), Bannari Amman Institute of Technology, Sathyamangalam, 9th and 10th October, 2020.
P.Manoj Kumar, D.Mohankumar, D.Ganesh Kumar, G.Ashwanth, M.Ashwath, “Investigating Thermal Storage Capability of an Evacuated Tube Solar Water Heating System with a Twin-Nano/Paraffin as Phase Change Material”, Proceedings of the Two Days Virtual International Conference on Sustainable Energy Solutions for a Better Tomorrow (SESBT 2020) organized by Vellore Institute of Technology, Chennai, 23rd and 24th July, 2020.
D. Mohankumar, Shashank, Y. Pazhaniappan, RA. Nithesh Kumar, R. Ragul, P. Manoj Kumar, P. Nikhil Babu, “Computational Study of Heat-Transfer in Extended Surfaces with Various Geometries”, Proceedings of the Two Days Virtual International Conference on Sustainable Energy Solutions for a Better Tomorrow (SESBT 2020) organized by Vellore Institute of Technology, Chennai, 23rd and 24th July, 2020.
P.Manoj Kumar, D.Mohankumar, G.Ashwanth, D.Ganesh Kumar, “Investigating Influence of Reflecting Surfaces to Improve the Performance of Solar Water Heaters”, Proceedings of the International Virtual Conference on Recent Innovations in Science, Engineering and Technology (IVCRISET 2020) organized by M.Kumarasamy College of Engineering, Karur, 3rd and 4th July, 2020.
P.Manoj Kumar, D.Mohankumar, B.K.Saravanan, “Thermal Storage Enhancement of an Evacuated Tube Solar Water Heater using a Silica-Alumina/Paraffin as Phase Change Material”, Proceedings of the International Virtual Conference on Recent Innovations in Science, Engineering and Technology (IVCRISET 2020) organized by M.Kumarasamy College of Engineering, Karur, 3rd and 4th July, 2020.
D.Mohankumar, P.Manoj Kumar, “Study on Organic Rankine Cycle for Waste Heat Recovery”, Proceedings of the International Virtual Conference on Recent Innovations in Science, Engineering and Technology (IVCRISET 2020) organized by M.Kumarasamy College of Engineering, Karur, 3rd and 4th July, 2020.
D.Mohankumar, B.K.Saravanan, P.Nikhil Babu, P.Manoj Kumar, “Selection Of Components For Organic Rankine Cycle For Low Grade Heat Source”, Proceedings of the 1st International Conference on Advances in Science Hub (ICASH 2020) organized by RSP Science Hub 27th and 28th June, 2020. The Proceedings published in International Research Journal on Advanced Science Hub (IRJASH), eISSN:2582-4376.
P.Manoj Kumar, G.Mukesh, S.Naresh, D.Mohana Nitthilan, “Study on Performance Enhancement of Solar PV Panel using a Nano-Composite Phase Change Material as Thermal Regulator”, Proceedings of the 1st International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020), PSG Institute of Technology and Applied Research, Coimbatore, 13th and 14th March, 2020.
D.Mohankumar, P.Manoj Kumar, “Analysis of Organic Rankine Cycle using Waste Heat from Low Grade Heat Sources”, Proceedings of the 1st International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020), PSG Institute of Technology and Applied Research, Coimbatore, 13th and 14th March, 2020.
P.Manoj Kumar, R.Jefferey Daniel, V.P.Sakthivelu, N.Parthiban, V.Pradeep, “Analysis on Multi-Purpose Solar Crop Drier using Phase Change Material”, Proceedings of the 5th National Conference on Technological Advancements in Materials, Manufacturing and Industrial Engineering (TAMMIE-2020), KPR Institute of Engineering and Technology, Coimbatore, 13th and 14th March, 2020. ISBN: 978-93-89515-19-0. Page No:19.
P.Manoj Kumar, A.K.Priya, G.Mukesh, D.Mohana Nitthilan, S.Naresh, R.Kishore Kumar, “Design and Fabrication of Solar Based Smart Irrigation System with Water Management”, Proceedings of the 5th National Conference on Technological Advancements in Materials, Manufacturing and Industrial Engineering (TAMMIE-2020), KPR Institute of Engineering and Technology, Coimbatore, 13th and 14th March, 2020. ISBN: 978-93-89515-19-0. Page No:20.
P.Manoj Kumar, M.Aswath, G. Ashwanth, D. Ganesh Kumar, “Thermal Analysis of Solar PV using PCM”, Proceedings of the 5th National Conference on Technological Advancements in Materials, Manufacturing and Industrial Engineering (TAMMIE-2020), KPR Institute of Engineering and Technology, Coimbatore, 13th and 14th March, 2020. ISBN: 978-93-89515-19-0. Page No:15.
P.Manoj Kumar, R.Vijay Bharath Goud, S. Sheik Nazim, M.Prathiyunnan, S.Ragul kumar, “Design and Fabrication of PV/T System”, Proceedings of the 5th National Conference on Technological Advancements in Materials, Manufacturing and Industrial Engineering (TAMMIE-2020), KPR Institute of Engineering and Technology, Coimbatore, 13th and 14th March, 2020. ISBN: 978-93-89515-19-0. Page No:32.
P.Manoj Kumar, K.Mylsamy, K.B.Prakash, M.Nithish, R.Anandkumar, “Investigating Thermal Properties of Nanoparticle Dispersed Paraffin (NDP) as Phase Change Material for Thermal Energy Storage”, Proceedings of the CSIR sponsored International Conference on Advances in Materials Research (ICAMR – 2019), Bannari Amman Institute of Technology, Sathyamangalam, 6th and 7th December, 2019.
P.Manoj Kumar, R.Anandkumar, K.Mylsamy, K.B.Prakash, “Experimental Investigation on Thermal Conductivity of Nanoparticle Dispersed Paraffin (NDP)”, Proceedings of the CSIR sponsored International Conference on Advances in Materials Research (ICAMR – 2019), Bannari Amman Institute of Technology, Sathyamangalam, 6th and 7th December, 2019.
K.B.Prakash, A.Amarkarthik, M.Ravikumar, P.Manoj Kumar, M.Chandrasekaran, “Optimizing Performance Characteristics of Blower for Combustion Process using Taguchi Based Grey Relational Analysis”, Proceedings of the CSIR sponsored International Conference on Advances in Materials Research (ICAMR – 2019), Bannari Amman Institute of Technology, Sathyamangalam, 6th and 7th December, 2019.
P.Manoj Kumar, K.Mylsamy, P.T.Saravanakumar, “Thermal storage enhancement of an evacuated tube solar water heater using a nano-hybrid/paraffin as phase change material”, Proceedings of the International Conference on Energy and Environment (ICEE – 2019), Hindustan College of Engineering and Technology, Coimbatore, 11th and 12th April, 2019.
P.Manoj Kumar, K.Mylsamy, P.T.Saravanakumar, “Study on thermal properties of the commercial grade paraffin using Nano-SiO2 particles for thermal energy storage applications”, Proceedings of the International Conference on Energy and Environment (ICEE – 2019), Hindustan College of Engineering and Technology, Coimbatore, 11th and 12th April, 2019.
P.Manoj Kumar, K.Mylsamy, P.T.Saravanakumar, R.Anandkumar, A.Pranav, “Experimental Study on Thermal Properties of Nano-TiO2 Embedded Paraffin (NEP) for Thermal Energy Storage Applications”, Proceedings of the Second International Conference on Materials Manufacturing and Modelling (ICMMM-19), Vellore Institute of Technology, Vellore, 29th to 31st March, 2019.
P.Manoj Kumar, R.Anandkumar, D.Sudarvizhi, K.Mylsamy, M.Nithish, “Experimental and Theoretical Investigations on Thermal Conductivity of the Paraffin Wax using CuO Nanoparticles”, Proceedings of the Second International Conference on Materials Manufacturing and Modelling (ICMMM-19), Vellore Institute of Technology, Vellore, 29th to 31st March, 2019.
P.Manoj Kumar, E.Srinivasan, R.Anandkumar, “Recognition of Mobile Shelving System for High Density Storage”, Proceedings of the International Conference on Mechanical and Building Sciences (ICMBS’19), SNS College of Technology, Coimbatore, 27th and 28th March, 2019.
P.Manoj Kumar, K.Mylsamy, “Characterization of Nano Al2O3 Enhanced Phase Change Material for Thermal Energy Storage”, Proceedings of the National Conference on Recent Advancement in Design, Automation and Intelligent Systems (RADAIS-2K19), Dr.N.G.P. Institute of Technology, Coimbatore, 23rd March, 2019.
P.Manoj Kumar, S.Gowtham, P.Hariharan, M.Harishgobi, C.Karthikeyan, “Study on the Effect of a Phase Change Material on the Performance of a Solar Cloth Drier”, Proceedings of the National Conference on Recent Trends in Engineering & Technology (NCRTET-2019), Rathinam Technical Campus, Coimbatore, 15th March, 2019.
P.Manoj Kumar, V.Arumughapriyan, J.G.Aswinbose, K.U.Jayamsrinath, S.Abdul Rahuman, “Investigations on Thermal Conductivity and Thermal Stability of Nano Enhanced Phase Change Material for Solar Thermal Applications”, Proceedings of the National Conference on Recent Trends in Engineering & Technology (NCRTET-2019), Rathinam Technical Campus, Coimbatore, 15th March, 2019.
P.Manoj Kumar, T.Berispaul Thangaiyah, P.Deepan chakaravathy, S.P.Dharani Dharan, R.Gopinath, “Conceptual Modeling of Portable Chip Cleaner for Conventional Machines”, Proceedings of the National Conference on Recent Trends in Engineering & Technology (NCRTET-2019), Rathinam Technical Campus, Coimbatore, 15th March, 2019.
P.Manoj Kumar, R.Kishorekumar, D.Mohana Nitthilan, G.Mukesh, S.Naresh, “Conceptual Modeling of Multipurpose Machine for Drilling, Cutting and Grinding Operations”, Proceedings of the National Conference on Recent Trends in Engineering & Technology (NCRTET-2019), Rathinam Technical Campus, Coimbatore, 15th March, 2019.
A. Murali Manoharan, R. Naveen Kumar, P. Praveen Kumar, P.Kishore, P.Manoj Kumar, “Effect on Tool Wear and Surface Roughness in Turning Operation Using Bio Cutting Fluids”, Proceedings of the National Conference on Recent Trends in Engineering & Technology (NCRTET-2019), Rathinam Technical Campus, Coimbatore, 15th March, 2019.
E.Srinivasan, P.Manoj Kumar, R.Anandkumar, “Product Standardization of Mobile Shelving System using Value Engineering”, Proceedings of the National Conference on Recent Trends in Engineering & Technology (NCRTET-2019), Rathinam Technical Campus, Coimbatore, 15th March, 2019.
P. Manoj Kumar, P.T.Saravanakumar, K.Mylsamy, P.Kishore, K.B.Prakash, “Study on Thermal Conductivity of the Candle Making Wax (CMW) using Nano - TiO2 particles for Thermal Energy Storage Applications”, Proceedings of the International Conference on Materials, Manufacturing and Machining (ICMMM – 2019), Bannari Amman Institute of Technology, Sathyamangalam, 8th and 9th March, 2019.
P. Manoj Kumar, R.Anandkumar, D.Sudarvizhi, K.B.Prakash, K.Mylsamy, “Experimental Investigations on Thermal Management and Performance Improvement of Solar PV Panel using a Phase Change Material”, Proceedings of the International Conference on Materials, Manufacturing and Machining (ICMMM – 2019), Bannari Amman Institute of Technology, Sathyamangalam, 8th and 9th March, 2019.
P. Kishore, P. Manoj Kumar, D.Dinesh, “Wear Analysis of Al 5052 Alloy with varying percentage of Tungsten Carbide”, Proceedings of the International Conference on Materials, Manufacturing and Machining (ICMMM – 2019), Bannari Amman Institute of Technology, Sathyamangalam, 8th and 9th March, 2019.
E.Srinivasan, P.Manoj Kumar, R.Anandkumar, “Product Standardization of Mobile Shelving System using Value Engineering”, Proceedings of the 4th National Conference on Technological Advancements in Materials, Manufacturing and Industrial Engineering (TAMMIE-2019), KPR Institute of Engineering and Technology, Coimbatore, 1st and 2nd March, 2019. ISBN: 978-93-87862-72-2. Page No:35.
P.Manoj Kumar, V.Arumughapriyan, J.G.Aswinbose, K.U.Jayamsrinath, S.Abdul Rahuman, “Experimental Investigations on Thermal Properties of Nano Enhanced Phase Change Material for Thermal Energy Storage Applications”, Proceedings of the 4th National Conference on Technological Advancements in Materials, Manufacturing and Industrial Engineering (TAMMIE-2019), KPR Institute of Engineering and Technology, Coimbatore, 1st and 2nd March, 2019. ISBN: 978-93-87862-72-2. Page No:36.
P.Manoj Kumar, S.Gowtham, P.Hariharan, M.Harishgobi, C.Karthikeyan, “Study on a Solar Cloth Drier using a Phase Change Material”, Proceedings of the 4th National Conference on Technological Advancements in Materials, Manufacturing and Industrial Engineering (TAMMIE-2019), KPR Institute of Engineering and Technology, Coimbatore, 1st and 2nd March, 2019. ISBN: 978-93-87862-72-2. Page No:38.
P.Manoj Kumar, R.Kishorekumar, D.Mohana Nitthilan, G.Mukesh, S.Naresh, “Design and Fabrication of Multipurpose Machine for Drilling, Cutting and Grinding Operations”, Proceedings of the 4th National Conference on Technological Advancements in Materials, Manufacturing and Industrial Engineering (TAMMIE-2019), KPR Institute of Engineering and Technology, Coimbatore, 1st and 2nd March, 2019. ISBN: 978-93-87862-72-2. Page No:34.
P.Manoj Kumar, T.Berispaul Thangaiyah, P.Deepan chakaravathy, S.P.Dharani Dharan, R.Gopinath, “Design and Fabrication of Vacuum Operated Chip Cleaner for Conventional Machines”, Proceedings of the 4th National Conference on Technological Advancements in Materials, Manufacturing and Industrial Engineering (TAMMIE-2019), KPR Institute of Engineering and Technology, Coimbatore, 1st and 2nd March, 2019. ISBN: 978-93-87862-72-2. Page No:37.
P.Manoj Kumar, V.Arumughapriyan, J.G.Aswinbose, K.U.Jayamsrinath, S.Abdul Rahuman, “Study on Thermal Properties of Nano Enhanced Phase Change Material for Solar Thermal Energy Storage Applications”, Proceedings of the SERB Sponsored National Conference on Advanced Materials in Waste Management (NCAMWM-2019), Dr.N.G.P. Institute of Technology, Coimbatore, 8th February, 2019. ISBN: 978-93-88570-03-9. Page No:33 (Appreciated with BEST PAPER AWARD).
P.Manoj Kumar, S.Gowtham, P.Hariharan, M.Harishgobi, C.Karthikeyan, “Experimental Study on a Demand Based Solar Cloth Drier using a Phase Change Material”, Proceedings of the SERB Sponsored National Conference on Advanced Materials in Waste Management (NCAMWM-2019), Dr.N.G.P. Institute of Technology, Coimbatore, 8th February, 2019. ISBN: 978-93-88570-03-9. Page No:34.
P.Manoj Kumar, R.Kishorekumar, D.Mohana Nitthilan, G.Mukesh, S.Naresh, “Design and Fabrication of Free Energy Generator Using Concentrated Solar Power (CSP) and a Phase Change Material (PCM)”, Proceedings of the SERB Sponsored National Conference on Advanced Materials in Waste Management (NCAMWM-2019), Dr.N.G.P. Institute of Technology, Coimbatore, 8th February, 2019. ISBN: 978-93-88570-03-9. Page No:17.
P.Manoj Kumar, K.Mylsamy, K.B.Prakash, “Performance Analysis of Evacuated Tube Solar Water Heater Using Reflectors”, Proceedings of the National Conference on Energy, Ecology and Environment (NCEEE – 2018), Bannari Amman Institute of Technology, Sathyamangalam, 2nd and 3rd August, 2018.
P.Manoj Kumar, K.Mylsamy, P.Kishore, P.Dhamodharan, “Experimental Investigation on a Solar Still using a Nano Composite Phase Change Material”, Proceedings of the International Conference on Desalination (InDA – 2018), National Institute of Technology, Trichy, 20th and 21st April, 2018.
P.Manoj Kumar, K.Mylsamy, “Thermal storage enhancement of an All Glass Evacuated Tube Solar Water Heater integrated with a Nano composite Phase Change Material”, Proceedings of the International Conference on Thermal Analysis and Energy Systems (ICTAES – 2018), Hindustan College of Engineering and Technology, Coimbatore, 12th and 13th April, 2018.
P.Manoj Kumar, C.Karthikeyan, S.Gowtham, P.Hariharan, M.Harish Gobi, “Investigation on a Solar Water Heater using a Diffuse Corrugated Reflector”, Proceedings of the International Conference on Advanced Science and Engineering Research (ASER - 2018), Al-Ameen Engineering College, Erode, 5th April, 2018.
P.Manoj Kumar, K.Mylsamy, P.Arish, N.Kabilan, “Nocturnal study on a Thermosyphon Solar Water Heater using a Phase Change Material”, Proceedings of the International Conference on Aeronautics Astronautics & Aviation (ICAAA - 2018), Dhanalakshmi Srinivasan College of Engineering and Technology, Chennai, 23rd and 24th March, 2018.
P.Manoj Kumar, V.T.Nishok, S.Ajithkumar, “Performance Evaluation of a Thermosyphon Solar Water Heater Integrated with a Nano Composite Phase Change Material”, Proceedings of the International Conference on Aeronautics Astronautics & Aviation (ICAAA - 2018), Dhanalakshmi Srinivasan College of Engineering and Technology, Chennai, 23rd and 24th March, 2018.
K.B.Prakash, P.Manoj Kumar, P.Vivekkumar, N.Praveen, “Effect of Blending Biodiesel Produced from Coconut Oil on Performance and Emission Characteristics of Diesel Engine”, Proceedings of the International Conference on Aeronautics Astronautics & Aviation (ICAAA - 2018), Dhanalakshmi Srinivasan College of Engineering and Technology, Chennai, 23rd and 24th March, 2018.
P.Manoj Kumar, D.Arunraj, N.Balaji, V.Goutam Srinivas, R.Boopathi Raja, “Investigation of Solar Water Heater using Reflectors”, Proceedings of the International Conference on Science, Technology, Engineering and Management (ICSTEM - 2018), Kalaignar Karunanithi Institute of Technology, Coimbatore, 23rd and 24th March, 2018.
P.Manoj Kumar, K.Mylsamy, K.B.Prakash, V.T.Nishok, P.Arish, “Preparation and characterization of a Nano Enhanced Phase Change Material (NEPCM) for Solar Thermal Heating Applications”, Proceedings of the National Conference on Recent Trends in Engineering & Technology (NCRTET-2018), Rathinam Technical Campus, Coimbatore, 14th March, 2018.
P.Manoj Kumar, A.Dhana Sekar, A.C.Aswath, N.Kabilan, “Study on Charging and Discharging characteristics of a Nanocomposite Phase Change Material (NCPCM) for Solar Water Heating”, Proceedings of the National Conference on Recent Trends in Engineering & Technology (NCRTET-2018), Rathinam Technical Campus, Coimbatore, 14th March, 2018.
P.Manoj Kumar, S.Aakash, A.Ajithkumar, P.Jaisurya, S.Balasubramaniyan, “Experimental analysis on a Natural Convection Solar Water Heater using TiO2 Nano PCM (TNPCM) as Latent Heat Storage”, Proceedings of the National Conference on Recent Trends in Engineering & Technology (NCRTET-2018), Rathinam Technical Campus, Coimbatore, 14th March, 2018.
P.Manoj Kumar, C.Karthikeyan, S.Gowtham, P.Hariharan, M.Harishgobi, “Fabrication of Polymer based Solar Water Heater with improved Thermal Energy Storage using Nano En-hanced Phase Change Material”, Proceedings of the National Conference on Recent Trends in Engineering & Technology (NCRTET-2018), Rathinam Technical Campus, Coimbatore, 14th March, 2018.
P.Manoj Kumar, K.Mahesh Kumar, V.Makesh, B.Mohesh Babu, “Investigation on a Nano Enhanced Phase Change Material on the roof of a single story building for space cooling”, Proceedings of the National Conference on Recent Trends in Engineering & Technology (NCRTET-2018), Rathinam Technical Campus, Coimbatore, 14th March, 2018.
P.Manoj Kumar, K.Mylsamy, V.T.Nishok, S.Ajith Kumar, “Investigation of a natural circulation Solar Water Heater integrated with a Phase Change Material”, Proceedings of the National Conference on Recent Advancement in Design, Automation and Intelligent Systems (RADAIS-2K18), Dr.N.G.P. Institute of Technology, Coimbatore, 8th March, 2018.
P.Manoj Kumar, M.Ganesan, J.Nawin, C.Parthiban, S.Pradeep, “A Study on a Solar Absorber Coating Using a Solar Still”, Proceedings of the International Conference on Advances in Science, Engineering and Management (ICASEM 2K17), Jay Shriram Group of Institutions, Tirupur, 30th & 31st March, 2017.
P.Manoj Kumar, M.Audithyavignesh, “Reduction of Exhaust Emission in Automobiles using Activated Nano Carbon”, Proceedings of the National Conference on Recent Trends in Engineering & Technology (NCRTET-2016), Rathinam Technical Campus, Coimbatore, 19th February, 2016.
P.Manoj Kumar, “Advancements in IC Engine’s Laser Ignition Technology”, Proceedings of the National Conference on Modern Trends in Mechanical Engineering (MTME-2015), Nandha Engineering College, Erode, 31st March, 2015.
P.Manoj Kumar, V.P.Venkataramanamurthy, K.Kumaresan, K.Udhaya Prakash, “Study on C.I engine connecting rod for exploring energy saving and weight reduction opportunities”, Proceedings of the International Conference on Advances in Mechanical and Mechatronics Engineering (ICAMME 2014), Sri Krishna College of Engineering and Technology, Coimbatore, 26th to 28th December, 2014.
P.Manoj Kumar, M.Durairaj, V.Anand babu, “Design and Analysis of the Diesel Engine Connecting Rod for Optimizing Material Cost”, Proceedings of the International Conference on Current Trends in Engineering and Technology (ICCTET 2014, Akshaya College of Engineering and Technology, Coimbatore, 26th March, 2014.
P.Manoj Kumar, D.Dinesh, M.Durairaj, “Design and Analysis of Heat Fins on the Electric Motor for Improving Heat Dissipation”, Proceedings of the National Conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2014), Bannari Amman Institute of Technology, Sathyamangalam, 4th & 5th April, 2014.
P.Manoj Kumar, M.Durairaj, V.Parthasarrathy, “Improving the Rate of Heat Dissipation of Electric Motor by Modifying the Dimensions of Heat Fins”, Proceedings of the National Conference on Modern Trends in Mechanical Engineering (MTME - 2014), Nandha Engineering College, Erode, 28th March, 2014.
P.Manoj Kumar, M.Venkatasudhahar, M.Chandru, M.Vadivel, “Analysis and optimization of the Automobile Connecting Rod”, Proceedings of the National Conference on Design, Materials and Constructions (NCDMC-2014), VelTech Dr.RR & Dr.SR Technical University, Chennai, 5th & 6th March, 2014.
Avhisheksingh, M.Venkatasudhahar, P.Manoj Kumar, Hafizul Islam, “Fatigue Analysis of Spot Welded Joint for Variable Sheet Thickness and Spot Diameter”, Proceedings of the National Conference on Design, Materials and Constructions (NCDMC-2014), VelTech Dr.RR & Dr.SR Technical University, Chennai, 5th & 6th March, 2014.
M.Dhayanithi, C.Balaji Perumal, P.Manoj Kumar, “Numerical Study on fatigue life of spot welding using FEA and MATLAB”, Proceedings of the National Conference – Recent trends in Engineering and Technology(NC-RTET-2013), SVS College of Engineering, Coimbatore, 20th April, 2013.
P.Manoj Kumar, M.Dhayanithi, “Stress Analysis on Steering Knuckle of the Automobile Steering System”, Proceedings of the National Conference on Recent Trends in Engineering (NCRTE-2013), Kathir College of Engineering, Coimbatore, 20th April, 2013.
P.Manoj Kumar, C.Balajiperumal, “Analysis of the effect of sheet thickness and spot diameter on the fatigue life of spot welded joints”, Proceedings of the National Conference on Recent Trends in Mechatronics & Industrial Safety Engineering(RTMISE-2013), K.S.Rangasamy College of Technology, Tiruchengode, 10th April, 2013.
P.Manoj Kumar, L.Madhavan, “Analysis of spot welded joint under fatigue loading for varying sheet thickness”, Proceedings of the National Conference on Innovative Technologies in Mechanical Engineering(ITME-2013), Muthayammal Engineering College, Rasipuram, 5th April, 2013.
P.Satheesh, P.Manoj Kumar, M.Dhayanithi, C.Balaji Perumal, “Alternate Energy source from Ocean (Blue power)”, Proceedings of the National conference on Information, Communication, Electrical-engineering, Mechanical-engineering, Apparel & Garment-technology and Intelligent Computing(NICE MAGIC – 2012), Angel College of Engineering & Technology, Tirupur, 29th March to 31st March, 2012.
P.Manoj Kumar, P.R.Kannan, “Aerodynamic Analysis and Drag force reduction of TATA Nano Car”, Proceedings of the National Conference on Advances in Mechanical Engineering (NCAME–2010), Mahendra Engineering College, Tiruchengode, 30th April,2010.
P.Manoj Kumar, P.R.Kannan, “Aerodynamic Analysis and Optimization of Passenger Car”, Proceedings of the National Conference on Recent Advancements in Engineering & Technology(NCRAET – 2010), SSM College of Engineering, Komarapalayam, 9th April, 2010.
P.Manoj Kumar, P.R.Kannan, “On Road Performance Analysis and Optimization of Passenger Car”, Proceedings of the National Conference on Advances and Challenges in Mechanical Engineering(ACME–2010), Erode Sengundar Engineering College, Thuduppathi, 25th & 26th March, 2010.