You open Plex on your TV, and it shows a short code with an instruction to go to plex.tv/link. Now what? If this is your first time, the screen can look confusing, and the steps are a little different on a Samsung TV and an LG TV.
This guide goes brand by brand. Jump to the part that matches your TV, follow the steps, and then use the common fixes at the end if anything gets stuck.
Typing long emails and passwords with a TV remote is slow and painful. Plex solves this by showing a short code on the TV. You enter that code on your phone or computer, where typing is easy. Once you do, the TV is linked to your Plex account.
So the page does not install anything. It only connects your TV to your account.
What you need before you start
A Plex account (you can create one on the Plex website)
A Samsung or LG Smart TV connected to the internet
A phone, tablet, or computer with a browser
A few minutes of quiet time, because the code runs out after a short while
Before You Touch the Remote: A Quick Checklist
A few small checks save a lot of time later.
Check that your TV is online
Open the TV settings and look at the network status. If the TV is not connected to Wi-Fi or a cable, the Plex app cannot show a working code.
Check the date and time on the TV
If the TV date or time is wrong, sign-in pages can fail. Set it to automatic if you can.
Check your TV software
Old TV software can cause apps to crash or not appear. Look for a software update in the settings and install it if one is waiting.
Check that your model is not too old
Plex does not run on every older TV. If you cannot find the Plex app at all, your model may be too old for it. The Plex website lists the devices it works with.
Menus can change slightly between years and models, but the main path stays the same.
Step 1: Find the Plex app
Press the Home button on your remote.
Go to Apps.
Select the search icon and type Plex.
Open the Plex app page.
Step 2: Install and open it
Select Install and wait for it to finish.
Select Open.
Pick the sign-in option when the app asks.
If you cannot find Plex in the Apps area
Look at your TV model year. Some very old Samsung models do not have the app. Also check that your TV region is set correctly, because app lists can depend on the region.
Step 3: Get your code
The TV will show a short code and tell you to visit plex.tv/link. Keep this screen open. Do not press Back or close the app while you finish the next step.
Step 4: Enter the code on your phone or computer
Open a browser and go to plex.tv/link.
Sign in to your Plex account if asked.
Type the code exactly as it shows on the TV.
Select the button to link the device.
After a few seconds, the TV screen should change and show your Plex home page.
Samsung tips that help
If the remote is slow, try changing the batteries.
Pin Plex to the Home bar so it is easy to open later.
If the app feels slow, close it fully and open it again.
LG uses webOS. The steps are close to Samsung, but the names are different.
Step 1: Open the LG Content Store
Press the Home button on your remote.
Open the LG Content Store.
Go to the Apps area, or use the search tool.
Search for Plex.
Step 2: Install and open it
Select Install.
When it finishes, select Launch.
Choose the option to sign in.
If Plex is not showing up
Check if your TV is a newer webOS model. Older LG TVs may not have the app. Also confirm the TV is connected to the internet, since the store needs a live connection.
Step 3: Get the code
A short code will appear with the plex.tv/link instruction. Keep the TV on this screen.
Step 4: Link it from your phone or computer
Go to plex.tv/link in any browser.
Sign in if needed.
Enter the code from the TV.
Confirm.
Your LG TV should move to the Plex home screen right after.
LG tips that help
If you use the Magic Remote, you can point at the on-screen keyboard instead of pressing arrows many times.
Add Plex to your Home launcher bar for quick access.
If the app freezes, turn the TV off and unplug it for a minute.
Here is a quick view of the main differences in plain words.
Where you find apps: Samsung uses the Apps area. LG uses the LG Content Store.
Open button name: Samsung says Open. LG says Launch.
Code screen: Both show a short code and the plex.tv/link instruction.
Link step: Same on both. You enter the code in a browser on another device.
This is the most common trouble point. Check these in order.
The code has expired
Codes work for a short time only. If you waited too long, go back on the TV and ask for a new one. Then enter the new code right away.
You typed it wrongly
Look at each letter again. Letters like O and zero can look alike in some fonts. Type slowly.
You are signed in to the wrong account
If you have more than one Plex account, make sure the browser is signed in to the one you want to link.
The browser is blocking the page
Open plex.tv/link in a private window. Turn off ad blockers for a moment if the page does not respond.
The TV did not update after you entered the code
Wait about 10 seconds. If nothing changes, close the Plex app on the TV, open it again, and check whether it asks you to sign in again.
Linking your TV only connects your account. You still need media to show up.
If you use your own server
Your Plex Media Server must be running on your computer or storage device. Make sure it is turned on and on the same network as the TV, at least for the first time.
If you only see online content
Plex also has built-in content of its own. If you expected your own movies and see something else, your server may be turned off or not claimed by your account.
Try this order
Check that the server computer is awake.
Open the Plex app on your phone and see if the library loads there.
If it loads on the phone but not the TV, sign out of the TV app and link it again.
Do I have to pay to link my TV with Plex?
No. Linking a device with a code is just part of signing in. Some Plex features may need a paid plan, but the link step itself does not.
Can I link more than one TV to the same account?
Yes. You can link several devices to one account. Repeat the same steps on each TV.
Why do I get a new code every time?
The code is made fresh each time for safety. It is meant to be used once and quickly.
Do I need to link the TV again after a restart?
Usually no. Once linked, the TV should remember your account. If it asks again, the app may have been reset, or you may have signed out.
My TV does not have the Plex app. What can I do?
You can use a streaming stick or box that does have the app, and plug it into the TV. Many people do this for older TVs.
Linking Plex on a Samsung or LG TV comes down to four steps: install the app, get the code, enter it at plex.tv/link, and wait for the screen to change. If something goes wrong, the cause is usually an expired code, a wrong account, or a TV that is offline. Go through the checks above one by one, and your TV should be ready to play in a few minutes.