S. Pattipaka†, S.-D. Kim†, Y. Jeong, S. H. Sung, S.-H. Heo, Y. Min, K.-I. Park, T. Zhang, J. Ryu, W.-H. Yoon, S.-G. Lee*, G.-T. Hwang*, Over 0.1 W root-mean-square output achieved in magneto-mechano-electric generators using Mn-doped PIN-PMN-PT single crystals, Nature Communications, 16, 11072 (2025). (†: equally contributed first authors).
S.-M. Park, J. W. Yoon, S.-D. Kim, H.-K. Kim, J. Kim, H.-K. Park, D. H. Kim*, C.-S. Park*, Effect of heat treatment conditions on the microstructural evolution and mechanical properties in SA508 Grade 3 steel fabricated by PM-HIP, Journal of Materials Research and Technology, 39, 7943-7952 (2025).
J. W. Yoon, S.-M. Park, J.-C. Lee, H.-K. Kim, S.-D. Kim, S. H. Ji, S. S. Sohn*, C.-S. Park*, Microstructural optimization via HIP and solution annealing to enhance impact toughness and fatigue life of 15Cr–5Ni martensitic stainless steel, Journal of Materials Research and Technology, 39, 9298-9307 (2025).
H. Y. Lee, S. Pattipaka, S.-D. Kim, G.-T. Hwang*, J. Jang*, Co‐Doped Hybrid Magneto‐Mechano‐Electric Generator for Powering Watt‐Level IoT Systems, Small Methods, 10.1002/smtd.202401666 (2025).
D. Lee, B.-S. Seong, B. Moon, B. C. Park, C. Lee, S.-D. Kim, N. Kang,* Mechanisms of Reverted Austenite and Grain Refinement via Neutron Diffraction for Enhancing Mechanical Properties of 304 Stainless Steel. Met. Mater. Int., https://doi.org/10.1007/s12540-024-01881-9 (2025).
K.-S. Jang, T. Jang, H. Jo, D. Shin, S. Lee, S.-D. Kim, S.-H. Kwon, J. Lee*, Effect of Heat Treatment on Corrosion Resistance of A356 Casting Alloy, Materials, 18(5), 1056. https://doi.org/10.3390/ma18051056 (2025).
J. Jeon, S.-H. Lee, S.-D. Kim, Z. Mao, D. N. Seidman, K. Kim, Y.-H. Cho, S.-H. Kim, K. Euh, J.-M. Lee, S.-J. Lee, J.-G. Jung*, Ultrasound alters the nucleation pathway of primary Mg2Si in a chemically modified multicomponent Al–Mg2Si alloy, Journal of Alloys and Compounds, 1009, 0925-8388 (2024).
B. C. Park, S.-D. Kim, I. Park, J.-H. Shin, J. H. Jang*, N. Kang*, Effect of Nb on Austenite Grain Growth in 10Cr-3Co-2W Martensitic Heat-Resistant Steel, Metals and Materials International, 30, 3311-3319 (2024).
S. Pattipaka, Y. Lim, Y. Jeong, M. Peddigari, Y. Min, J. W. Jeong, J. Jang, S.-D. Kim, G.-T. Hwang*, Improving the Energy Storage Performance in Bi0.5Na0.5TiO3-Based Ceramics by Combining Relaxor and Antiferroelectric Properties, Materials, 17, no. 20: 5044 (2024).
S. Nellikode, S. P. Murugan, J.-H. Chung, C.-H. Lee, H. Park, S.-D. Kim, N. Ku, Y.-D. Park*, Role of M-A constituents in bainitic microstructure on crack propagation behavior in the ICCGHAZ of HSLA steels for offshore applications, Journal of Materials Research and Technology, 32, 250-260 (2024).
J. H. Jang*, S.-D. Kim*, Evolution from clusters to precipitates in niobium-micro-alloyed ferritic steel: A combined in situ scanning transmission electron microscopy and atomistic study, Scripta Materialia, 243, 115967 (2024).
H. Park, S.-J. Kim, Y.-j. Song, H.-K. Shin, J.-B. Jeon, S.-D. Kim, J.-H. Kim, H.-J. Lee*, Microstructure-controlled Electrodeposition of Mechanically Reliable Double-layered Thin Foils for Secondary Batteries, Metals and Materials International, 30, 1430–1439 (2024).
H. Choi, S. Pattipaka, Y. H. Son, Y. M. Bae, J. H. Park, C. K. Jeong, H. E. Lee, S.-D. Kim, J. Ryu, G.-T. Hwang*, Improved Energy Storage Density and Efficiency of Nd and Mn Co-Doped Ba0.7Sr0.3TiO3 Ceramic Capacitors Via Defect Dipole Engineering, Materials, 16(20), 6753 (2023).
J. Moon*, S.-J. Park, C.-H. Lee, H.-U. Hong, B.H. Lee, S.-D. Kim, Influence of microstructure evolution on hot ductility behavior of austenitic Fe–Mn–Al–C lightweight steels during hot tensile deformation, Materials Science and Engineering A, 868, 144786 (2023).
J. H. Jang*, J. Y. Kang, S.-D. Kim*, Development of GD-containing austenitic stainless steel, Journal of Nuclear Materials, 574, 154197 (2023).
K.-W. Kim, S.-D. Kim, S.-J. Park, H. Park, J. Moon, H.-U. Hong, C.-H. Lee*, Optimization of Process Conditions for Ultralightweight Steel with More Than 13 wt% of Al and 5 wt% of Cr, steel research international, 94(2), 2200207 (2023).
J.-H. Shin, J.-Y. Song, S.-D. Kim, S.-J. Park, Y.-W. Ma, J.-W. Lee*, Microstructure, Tensile, and Fatigue Properties of Large-Scale Austenitic Lightweight Steel, Materials, 15(24), 8909 (2022).
H. Park, C. Lee, K.-W. Kim, S.-D. Kim, J. H. Jang, H.-Y. Ha, J. Moon, C.-H. Lee, S.-J. Park*, Effect of S addition on mechanical and machinability properties in austenitic Fe–Mn–Al–C lightweight steels, Materials Science and Engineering: A, 856, 143939 (2022).
J. Moon*, C.-H. Lee, H.-H. Jo, S.-D. Kim, H.-U. Hong, J.-H. Chung, B.H. Lee, Microstructure and High-Temperature Strength in the Weld Coarse-Grained Heat-Affected Zone of Fire-Resistant Steels and the Effects of Mo and Nb Additions, Metals and Materials International, 28, 966-974 (2021).
H.-Y. Ha, H.-H. Jo, J. Lee, S.-D. Kim*, J. Moon, J.H. Jang, T.-H. Lee*, C.-H. Lee, Effect of combined addition of N and C on high-temperature deformation behavior of UNS S32101 type lean duplex stainless steels, Materials Today Communications, 29, 102749 (2021).
M. Peddigari†, K. Woo†, S.-D. Kim†, M.S. Kwak, J.W. Jeong, J.-H. Kang, S.-H. Lee, J.H. Park, K.-I. Park, V. Annapureddy, J. Jang, Y. Min, C.-W. Ahn, J.-J. Choi, B.-D. Hahn, W.-H. Yoon, J. Ryu, G.-T. Hwang*, Ultra-magnetic field sensitive magnetoelectric composite with sub-pT detection limit at low frequency enabled by flash photon annealing, Nano Energy, 90, 106598 (2021). (†: equally contributed first authors).
J. Moon*, S.-D. Kim, C.-H. Lee, H.-H. Jo, H.-U. Hong, J.-H. Chung, B. H. Lee, Strengthening mechanisms of solid solution and precipitation at elevated temperature in fire-resistant steels and the effects of Mo and Nb addition, Journal of Materials Research and Technology, 15, 5095-5105 (2021).
H.-Y. Ha*, J.H. Jang, T.-H. Lee, S.-D. Kim, C.-H. Lee, J. Moon, Enhancement of the resistance to localized corrosion of type 304 borated stainless steels through hot rolling, Corrosion Science, 192, 109798 (2021).
J. Moon*, H.-H. Jo, H.-Y. Ha, S.-D. Kim, T.-H. Lee, C.-H. Lee, Microstructure evolution and hot deformation behavior of 25Cr–6Mn–3Ni–1Mo–3W–0.1C–0.34N lean duplex stainless steel, Journal of Materials Research and Technology, 14, 186-194 (2021).
D. Byeon, H.-Y. Ha*, S.-D. Kim, H.-H. Jo, J. Lee, J.H. Jang, T.-H. Lee, J.-H. Shin, N. Kang, Enhancement of Corrosion Properties of Fe-18Cr-9Mn-5.5Ni-0.3(C + N) Austenitic Stainless Steels by Carbon Alloying, Metals, 11(7), 1124 (2021).
S.-D. Kim, S.-J. Park, J.h. Jang, J. Moon, H.-Y. Ha, C.-H. Lee, H. Park, J.-H. Shin, T.-H. Lee*, Strain hardening recovery mediated by coherent precipitates in lightweight steel, Scientific Reports, 11(1), 14468 (2021).
H.-Y. Ha, T.-H. Lee* S.-D. Kim, J.-Y. Kang, J.H. Jang, J. Moon, M.-H. Jang, H.-U. Hong, Analysis of the initial oxidation layer of W-substituted alumina-forming heat-resistant steel, Philosophical Magazine, 101(8), 907-928 (2021).
J. Moon*, H.-H. Jo, S.-J. Park, S.-D. Kim, T.-H. Lee, C.-H. Lee, M.-G. Lee, H.-U. Hong, D.-W. Suh, D. Raabe, Ti-bearing lightweight steel with large high temperature ductility via thermally stable multi-phase microstructure, Materials Science and Engineering A, 808, 140954 (2021).
D.C. Ramachandran, J. Moon, C.-H. Lee, S.-D. Kim, J.-H. Chung, E. Biro, Y.-D. Park*, Role of bainitic microstructures with M-A constituent on the toughness of an HSLA steel for seismic resistant structural applications, Materials Science and Engineering A, 801, 140390 (2021).
J.Y. Kang, J.H. Jang*, S.-D. Kim, H.-Y. Ha, T.-H. Lee, Y.S. Choi, A new type of gadolinium-rich precipitate in alloy steels, Journal of Nuclear Materials, 542, 152462 (2020).
J. Moon*, T.-H. Lee, S.-D. Kim, C.-H. Lee, J.H. Jang, J.-H. Shin, J.-W. Lee, B.H. Lee, D.-W. Suh, Isothermal transformation of austenite to ferrite and precipitation behavior in 9Cr-1.5Mo-1.25Co-0.1C-VNb heat-resistant steel, Materials Characterization, 170, 110677 (2020).
K.-W. Kim, S.-J. Park, J. Moon, J.H. Jang, H.-Y. Ha, T.-H. Lee, H.-U. Hong, B.H. Lee, H.N. Han, Y.-J. Lee, C.-H. Lee*, S.-D. Kim*, Characterization of microstructural evolution in austenitic Fe-Mn-Al-C lightweight steels with Cr content, Materials Characterization, 170, 110717 (2020).
D.C. Ramachandran, S.-D. Kim, J. Moon, C.-H. Lee, J.-H. Chung, E. Biro, Y.-D. Park*, Classification of martensite-austenite constituents according to its internal morphology in high-strength low alloy steel, Materials Letters, 278, 128422 (2020).
J.-G. Jung*, Y.-H. Cho, S.-D. Kim, S.-B. Kim, S.-H. Lee, K. Song, K. Euh, J.-M. Lee, Mechanism of ultrasound-induced microstructure modification in Al–Zr alloys, Acta Materialia, 199, 73-84 (2020).
H.-H. Jo, C. Shin, J. Moon, J.H. Jang, H.-Y. Ha, S.-J. Park, T.-H. Lee, B.H. Lee, J.-H. Chung, J.G. Speer, K.O. Findley, T.R. Jacobs, C.-H. Lee*, S.-D. Kim*, Mechanisms for improving tensile properties at elevated temperature in fire-resistant steel with Mo and Nb, Materials & Design, 194, 108882 (2020).
J. Moon, H.-Y. Ha, K.-W. Kim, S.-J. Park, T.-H. Lee, S.-D. Kim, J.H. Jang, H.-H. Jo, H.-U. Hong, B.H. Lee, Y.-J. Lee, C. Lee, D.-W. Suh, H.N. Han, D. Raabe, C.-H. Lee*, A new class of lightweight, stainless steels with ultra-high strength and large ductility, Scientific Reports, 10(1), 12140 (2020).
H.-Y. Ha*, T.-H. Lee*, S.-D. Kim, J.H. Jang, J. Moon, Improvement of the Corrosion Resistance by Addition of Ni in Lean Duplex Stainless Steels, Metals, 10(7), 891 (2020).
J.-H. Shin, J.H. Jang, S.-D. Kim, S.-J. Park, J. Lee*, Dynamic strain aging in Fe-Mn-Al-C lightweight steel, Philosophical Magazine Letters, 100(7), 355-364 (2020).
H.-Y. Ha, S.-D. Kim*, J.H. Jang, T.-H. Lee*, C.-H. Lee, J. Moon, Pitting Corrosion and Passive Behavior of Type AISI 304-based Borated Stainless Steels in a Boric Acid Solution, Journal of The Electrochemical Society, 167(10), 101506 (2020).
J.-H. Shin, G.-Y. Rim, S.-D. Kim, J.H. Jang, S.-J. Park, J. Lee*, Effects of aging heat-treatment on dynamic strain aging behavior in high-Mn lightweight steel, Materials Characterization, 164, 110316 (2020).
J. Moon*, J.H. Jang, S.-D. Kim, T.-H. Lee, H.-Y. Ha, C.-H. Lee, H.-U. Hong, Different aspect of solidification cracking susceptibility and hot ductility behavior of borated stainless steels and the effects of boron content, Materials Characterization, 164, 110319 (2020).
H. Yoon, H.-Y. Ha*, S.-D. Kim, T.-H. Lee, J.H. Jang, J. Moon, N. Kang, Effects of carbon substitution for nitrogen on the pitting corrosion resistance of type UNS S32205 duplex stainless steel, Corrosion Science, 164, 108308 (2020).
J.H. Shin, J.S. Jeong, J. Lee, S.D. Kim, J.H. Jang, J. Moon, H.Y. Ha, T.H. Lee*, Nitrogen-induced yield point phenomenon in an austenitic steel, Materials Science and Engineering A, 774, 138897 (2020).
B.-H. Kim, J. Moon, S.-D. Kim, J.-H. Jang, T.-H. Lee, H.-U. Hong, H.C. Kim, K.-M. Cho, C.-H. Lee*, Effect of concentrations of Ta and Ti on microstructure and mechanical properties of 9Cr-1W reduced activation ferritic/martensitic steel, Fusion Engineering and Design, 151, 111364 (2020).
J.-Y. Kang*, H.-Y. Ha, S.-D. Kim, J. Y. Park, M.-H. Jang and T.-H. Lee , Effect of tungsten on the oxidation of alumina-forming austenitic stainless steel, Applied Microscopy, 49, 1-10 (2019).
J. Ryu, B. Park, J. Kang, D. Hong, S.-D. Kim, J.-K. Yoo, J.W. Yi, S. Park, Y. Oh*, Three-Dimensional Monolithic Organic Battery Electrodes, ACS Nano, 13(12), 14357-14367 (2019).
S.-D. Kim, J.Y. Park, S.-J. Park, J.h. Jang, J. Moon, H.-Y. Ha, C.-H. Lee, J.-Y. Kang, J.-H. Shin, T.-H. Lee*, Direct observation of dislocation plasticity in high-Mn lightweight steel by in-situ TEM, Scientific Reports, 9(1), 15171 (2019).
J. Moon*, S.-J. Park, S.-D. Kim, J.H. Jang, T.-H. Lee, C.-H. Lee, B.H. Lee, H.-U. Hong, H.N. Han, Phase transformation mechanism and hardness during ageing of an austenitic Fe-30Mn-10.5Al-1.1C-3Mo lightweight steel, Journal of Alloys and Compounds, 804, 511-520 (2019).
H. Yoon, H.-Y. Ha*, T.-H. Lee, S.-D. Kim, J.H. Jang, J. Moon, N. Kang, Pitting Corrosion Resistance and Repassivation Behavior of C-Bearing Duplex Stainless Steel, Metals, 9(9), 930 (2019).
T.-H. Lee*, S.-D. Kim*, H.-Y. Ha, J.H. Jang, J. Moon, J.-Y. Kang, C.-H. Lee, S.-J. Park, W. Woo, J.-H. Shin, J.-W. Lee, D.-W. Suh, H.-U. Hong, Screw dislocation driven martensitic nucleation: A step toward consilience of deformation scenario in fcc materials, Acta Materialia, 174, 342-350 (2019).
C.-H. Lee*, W.-K. Seol, B.H. Kim, S.-D. Kim, J.H. Jang, T.-H. Lee, S.-W. Moon, S.-Y. Kim, Investigation on new type of fracture in Cr-Mo-V steel slab, Engineering Failure Analysis, 98, 240-248 (2019).
S.-D. Kim†, G.-T. Hwang†, K. Song†, C.K. Jeong, K.-I. Park, J. Jang, K.-H. Kim, J. Ryu, S.-Y. Choi*, Inverse size-dependence of piezoelectricity in single BaTiO3 nanoparticles, Nano Energy, 58, 78-84 (2019). (†: equally contributed first authors)
J. Park, R.D. Kamachali, S.-D. Kim, S.-H. Kim, C.-S. Oh, C. Schwarze, I. Steinbach*, First Evidence for Mechanism of Inverse Ripening from In-situ TEM and Phase-Field Study of δ′ Precipitation in an Al-Li Alloy, Scientific Reports, 9(1), 3981 (2019).
C.-H. Won, J.H. Jang*, S.-D. Kim, J. Moon, H.-Y. Ha, J.-Y. Kang, C.-H. Lee, T.-H. Lee, N. Kang, Effect of annealing on mechanical properties and microstructure evolution of borated stainless steels, Journal of Nuclear Materials, 515, 206-214 (2019).
K.T. Kim*, T.S. Min, S.-D. Kim, E.-A. Choi, D.W. Kim, S.-Y. Choi*, Strain-mediated point defects in thermoelectric p-type bismuth telluride polycrystalline, Nano Energy, 55, 486-493 (2019).
J.M. Oh, J.-H. Kang, S. Lee, S.-D. Kim, N. Kang, C.H. Park*, Origin of superproperties of Ti-23Nb-1Ta-2Hf-O alloy, Materials Letters, 233, 162-165 (2018).
B.H. Kim, J.H. Jang, W.-K. Seol, J. Moon, S.-D. Kim, T.-H. Lee, H.C. Kim, C.-H. Lee*, K.-M. Cho, Effect of Ti addition on hardness change during tempering in reduced activation ferritic/martensitic (RAFM) steels, Journal of Nuclear Materials, 508, 595-598 (2018).
S.M. Jo, S.D. Kim, T.-H. Kim, Y. Go, C.-W. Yang, B.S. You, Y.M. Kim*, Sequential precipitation behavior of Mg17Al12 and Mg2Sn in Mg-8Al-2Sn-1Zn alloys, Journal of Alloys and Compounds, 749, 794-802 (2018).
S.-D. Kim†, J.-S. Kim†, J. Yoon*, Phase analysis of hydride blister in zirconium alloy, Journal of Alloys and Compounds, 735, 2007-2011 (2018). (†: equally contributed first authors)
J. Kim, K.H. Lee, S.-D. Kim, J.-H. Lim, Nosang V. Myung*, Simple and effective fabrication of Sb2Te3 films embedded with Ag2Te nanoprecipitates for enhanced thermoelectric performance, Journal of Materials Chemistry A, 6(2), 349-356 (2018).
V. Annapureddy, Y. Kim, G.-T. Hwang, H.W. Jang, S.-D. Kim, J.-J. Choi, B. Cho, J. Ryu*, Room-Temperature Solid-State Grown WO3−δ Film on Plastic Substrate for Extremely Sensitive Flexible NO2 Gas Sensors, Advanced Materials Interfaces, 5(1), 1700811 (2018).
Y.-W. Kim*, S.H. Jang, T. Nishimura, S.-Y. Choi, S.-D. Kim, Microstructure and high-temperature strength of silicon carbide with 2000ppm yttria, Journal of the European Ceramic Society, 37(15), 4449-4455 (2017).
G.-Y. Kim, K. Chu, K.-D. Sung, H.-S. Lee, S.-D. Kim, K. Song, T. Choi, J. Lee, J.P. Buban, S.-Y. Yoon, K.-H. Kim, C.-H. Yang, S.-Y. Choi*, Disordered ferroelectricity in the PbTiO3/SrTiO3 superlattice thin film, APL Materials, 5(6), 066104 (2017).
D.-H. Kim*, H.-K. Jang, M.-S. Kim, S.-D. Kim, D.-J. Lee, G.T. Kim, Conductive multi-walled boron nitride nanotubes by catalytic etching using cobalt oxide, Physical Chemistry Chemical Physics, 19(2), 976-985 (2017).
J.-S. Kim†, S.-D. Kim†, J. Yoon*, Hydride formation on deformation twin in zirconium alloy, Journal of Nuclear Materials, 482, 88-92 (2016). (†: equally contributed first authors)
S.-J. Kim, S.-D. Kim*, D. Yoo, J. Lee, Y. Rhyim, D. Kim*, Evaluation of the Athermal Effect of Electric Pulsing on the Recovery Behavior of Magnesium Alloy, Metallurgical and Materials Transactions A, 47(12), 6368-6373 (2016).
K.J. Kim, G. Lee, S.-D. Kim, S.-I. Kim, J.H. Youk, J. Lee, Y.-W. Kim, W.-R. Yu*, Bond strength of individual carbon nanotubes grown directly on carbon fibers, Nanotechnology, 27(40), 405704 (2016).
S.A. Lee, H. Jeong, S. Woo, J.-Y. Hwang, S.-Y. Choi, S.-D. Kim, M. Choi, S. Roh, H. Yu, J. Hwang, S.W. Kim, W.S. Choi*, Phase transitions via selective elemental vacancy engineering in complex oxide thin films, Scientific Reports, 6(1), 23649 (2016).
T.-W. Lim, S.-D. Kim, K.-D. Sung, Y.-M. Rhyim, H. Jeen, J. Yun, K.-H. Kim, K.-M. Song, S. Lee, S.-Y. Chung, M. Choi*, S.-Y. Choi*, Insights into cationic ordering in Re-based double perovskite oxides, Scientific Reports, 6(1), 19746 (2016).
J. Kim, D. Kim, S.Y. Choi, S.-D. Kim, J.Y. Song, J. Kim*, Electrochemical Deposition of Flat Nanoporous Pt Layers with Small Pore Dimensions, Electrochimica Acta, 189, 196-204 (2016).
G.-Y. Kim, K.-D. Sung, Y. Rhyim, S.-Y. Yoon, M.-S. Kim, S.-J. Jeong, K.-H. Kim, J. Ryu, S.-D. Kim*, S.-Y. Choi*, Enhanced polarization by the coherent heterophase interface between polar and non-polar phases, Nanoscale, 8(14), 7443-7448 (2016).
S.Z. Han*, J. Kang, S.-D. Kim, S.-Y. Choi, H.G. Kim, J. Lee, K. Kim, S.H. Lim, B. Han, Reliable and cost effective design of intermetallic Ni2Si nanowires and direct characterization of its mechanical properties, Scientific Reports, 5(1), 15050 (2015).
M.-H. Sheen, S.-D. Kim, J.-H. Lee, J.-I. Shim, Y.-W. Kim*, V-pits as Barriers to Diffusion of Carriers in InGaN/GaN Quantum Wells, Journal of Electronic Materials, 44(11), 4134-4138 (2015).
S. Yoon, S.-D. Kim, S.-Y. Choi, J.-H. Lim*, B. Yoo, Hierarchical Shape Evolution of Cuprous Oxide Micro- and Nanocrystals by Surfactant-Assisted Electrochemical Deposition, Crystal Growth & Design, 15(10), 4969-4974 (2015).
S.-D. Kim, Y. Rhyim, J.-S. Kim, J. Yoon*, Characterization of zirconium hydrides in Zircaloy-4 cladding with respect to cooling rate, Journal of Nuclear Materials, 465, 731-736 (2015).
S.-Y. Choi†, S.-D. Kim†, M. Choi*, H.-S. Lee, J. Ryu, N. Shibata, T. Mizoguchi, E. Tochigi, T. Yamamoto, S.-J.L. Kang, Y. Ikuhara, Assessment of Strain-Generated Oxygen Vacancies Using SrTiO3 Bicrystals, Nano Letters, 15(6), 4129-4134 (2015). (†: equally contributed first authors)
J.-K. Choi, J. Kwak, S.-D. Park, H.D. Yun, S.-Y. Kim, M. Jung, S.Y. Kim, K. Park, S. Kang, S.-D. Kim, D.-Y. Park, D.-S. Lee, S.-K. Hong, H.-J. Shin, S.-Y. Kwon*, Growth of Wrinkle-Free Graphene on Texture-Controlled Platinum Films and Thermal-Assisted Transfer of Large-Scale Patterned Graphene, ACS Nano, 9(1), 679-686 (2015).
Q.X. Xia*, K. San Hui, K.N. Hui, S.D. Kim, J.H. Lim, S.Y. Choi, L.J. Zhang, R.S. Mane, J.M. Yun, K.H. Kim, Facile synthesis of manganese carbonate quantum dots/Ni(HCO3)2–MnCO3 composites as advanced cathode materials for high energy density asymmetric supercapacitors, Journal of Materials Chemistry A, 3(44), 22102-22117 (2015).
J.H. Chu, J. Kwak, S.-D. Kim, M.J. Lee, J.J. Kim, S.-D. Park, J.-K. Choi, G.H. Ryu, K. Park, S.Y. Kim, J.H. Kim, Z. Lee, Y.-W. Kim, S.-Y. Kwon*, Monolithic graphene oxide sheets with controllable composition, Nature Communications, 5(1), 3383 (2014).
J.-H. Lim*, G.-J. Shin, T.-Y. Hwang, H.-R. Lim, Y.-I. Lee, K.-H. Lee, S.-D. Kim, M.-W. Oh, S.-D. Park, N.V. Myung, Y.-H. Choa, Three-dimensional hierarchical Te–Si nanostructures, Nanoscale, 6(20) 11697-11702 (2014).
H. Lee, J. Hong, S. Lee, S.-D. Kim, Y.-W. Kim, T. Lee*, Selectively grown vertical silicon nanowire p–n+ photodiodes via aqueous electroless etching, Applied Surface Science, 274, 79-84 (2013) .
C. Yang, S. Lee, K.-W. Shin, S. Oh, D. Moon, S.-D. Kim, Y.-W. Kim, C.-Z. Kim, W.-k. Park, W.J. Choi, J. Park, E. Yoon*, Characterization of deep levels in GaInP on Ge and Ge-on-Si substrates by photoluminescence and cathodoluminescence, Journal of Crystal Growth, 370, 168-172 (2013).
J. Seo, S. Lee, H. Han, Y. Chung, J. Lee, S.-D. Kim, Y.-W. Kim, S. Lim, T. Lee*, Reversible wettability control of silicon nanowire surfaces: From superhydrophilicity to superhydrophobicity, Thin Solid Films, 527, 179-185 (2013).
J.-K. Choi, J.-H. Huh, S.-D. Kim, D. Moon, D. Yoon, K. Joo, J. Kwak, J.H. Chu, S.Y. Kim, K. Park, Y.-W. Kim, E. Yoon, H. Cheong, S.-Y. Kwon*, One-step graphene coating of heteroepitaxial GaN films, Nanotechnology, 23(43), 435603 (2012).
H. Go, J. Kwak, Y. Jeon, S.-D. Kim, B. Cheol Lee, H. Suk Kang, J.-H. Ko, N. Kim, B.-K. Kim, J.-W. Yoo, S. Youb Kim, Y.-W. Kim, S.-Y. Kwon*, K. Park, Low-temperature formation of epitaxial graphene on 6H-SiC induced by continuous electron beam irradiation, Applied Physics Letters, 101(9), 092105 (2012).
D.-S. Ko, S.-I. Kim, T.-Y. Ahn, S.-D. Kim, Y.-H. Oh, Y.-W. Kim*, Effect of the electrode materials on the resistive switching of Ti4O7, Applied Physics Letters, 101(5), 053502 (2012).
S. Lee, J.H. Koo, J. Seo, S.-D. Kim, K.H. Lee, S. Im, Y.-W. Kim, T. Lee*, The effects of surface modification on the electrical properties of p–n+ junction silicon nanowires grown by an aqueous electroless etching method, Journal of Nanoparticle Research, 14(5), 840 (2012).
J. Kwak, J.H. Chu, J.-K. Choi, S.-D. Park, H. Go, S.Y. Kim, K. Park, S.-D. Kim, Y.-W. Kim, E. Yoon, S. Kodambaka, S.-Y. Kwon*, Near room-temperature synthesis of transfer-free graphene films, Nature Communications, 3(1), 645 (2012).
J.H. Choi, H.Y. Ahn, Y.S. Lee, K. Park, T.-H. Kim, K.S. Cho, C.W. Baik, S.I. Kim, H. Yoo, E.H. Lee, B.L. Choi, S.-D. Kim, Y.-W. Kim, M. Kim*, S. Hwang, GaN light-emitting diodes on glass substrates with enhanced electroluminescence, Journal of Materials Chemistry, 22(43), 22942-22948 (2012).
J. Park, S.-D. Kim, S.-P. Hong, S.-I. Baik, D.-S. Ko, C.Y. Lee, D.-L. Lee, Y.-W. Kim*, Quantitative measurement of cementite dissociation in drawn pearlitic steel, Materials Science and Engineering A, 528(15), 4947-4952 (2011).
S.-D. Kim, D.-S. Ko, W.K. Jang, K.S. Shin, Y.-W. Kim*, Precipitation hardening through sacrificial phase in aluminum–quasicrystal metal matrix composites, Materials Science and Engineering A, 528(13), 4845-4848 (2011).
K.Y. Hwang, S.-D. Kim, Y.-W. Kim, W.-R. Yu*, Mechanical characterization of nanofibers using a nanomanipulator and atomic force microscope cantilever in a scanning electron microscope, Polymer Testing, 29(3), 375-380 (2010).
H.-K. Park, S.-D. Kim, S.-C. Park, J.-T. Park, N.-M. Hwang*, Sub-boundaries in abnormally growing Goss grains in Fe–3% Si steel, Scripta Materialia, 62(6), 376-378, (2010).
D.-S. Ko, Y.M. Park, S.-D. Kim, Y.-W. Kim*, Effective removal of Ga residue from focused ion beam using a plasma cleaner, Ultramicroscopy, 107(4), 368-373 (2007).