How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-30 · 7 min read · Independent comparison
• Philips In-Ear Headphones Insert — biggest strength: an angled acoustic pipe paired with an acoustics vent that is specifically designed to control low frequencies, plus active noise cancellation so bass stays clean even at low volume.
• Philips In-Ear Headphones Insert — biggest trade-off: it is a single-driver 16-ohm design with no replaceable accessories listed beyond three silicone cap sizes, and its cable winder is convenient rather than premium.
• エレコム(ELECOM) EHP-GB100ARD — biggest strength: a 10 mm external-magnet dynamic driver with large neodymium magnets, a WFC paper/PU composite diaphragm and a rigid aluminum rear housing — a spec sheet written almost entirely for bass output.
• エレコム(ELECOM) EHP-GB100ARD — biggest trade-off: it relies on passive noise cancellation only, and its semi-open ducted construction means it will never isolate the way a sealed, actively cancelling design can.
• For the commuter who wants quiet: Philips In-Ear Headphones Insert.
• For the listener chasing maximum bass character and tip fit: エレコム(ELECOM) EHP-GB100ARD.
The Philips In-Ear Headphones Insert (model SHE9550/28) is built around one idea: get the sound pointed at your ear canal correctly. The angled acoustic pipe channels sound directionally and precisely, and the ergonomic angled design is meant to sit naturally in the ear rather than forcing you to jam a straight barrel into place. That combination of angle plus three sizes of ultra-soft silicone caps is what makes it a comfortable long-session earphone for most adult ears.
Then there is the bass story. Philips uses an acoustics vent to control low frequencies, which is a deliberate design choice — instead of just boosting the low end, the vent is there to keep it clean and controlled. The 16-ohm impedance keeps it easy to drive from a phone or laptop, and the 3.5 mm wired jack means no pairing, no charging, no latency. Add active noise cancellation and exceptional noise isolation, and the practical payoff is that you can listen at lower volumes and still hear the bass and detail clearly. That is a genuinely useful trait on a train or a plane.
Buy this one if you want a wired in-ear for commuting, noisy offices or travel, where cutting background noise matters as much as bass punch. Skip it if you specifically want a tunable fit, a carry pouch, or a housing you can feel is metal — this one is silicone-bodied and black, and the included extras stop at the cable winder and the three cap sizes.
The Elecom EHP-GB100ARD is the more single-minded of the two. Its whole identity is the "Grand Bass" driver: a 10 mm dynamic unit using an external magnetic circuit with large neodymium magnets. Elecom pairs that with a WFC paper and PU composite diaphragm chosen for high internal loss and elasticity, which is exactly the kind of material recipe you use when you want the diaphragm to move a lot of air without turning muddy. A lightweight CCAW voice coil is there to sharpen vibration response and widen the range.
The housing does real work too. The rear is rigid aluminum, which suppresses vibration coming off the driver yoke so what reaches your ear is the diaphragm's signal rather than resonance. And the semi-open construction — ducts at both the front and rear of the driver, with ventilation resistance tuned — lets the diaphragm move more freely. That is the mechanical reason this earphone can push "overwhelming bass" without the sound collapsing. The adjustable-position ear caps are the other half of the bass equation: a better seal equals better bass, and Elecom gives you XS, S, M and L to get there.
Buy this one if bass character is your priority, you like the idea of a red aluminum housing, and you want a full accessory kit — four tip sizes, a cord keeper and a pouch. Skip it if blocking out a loud environment is the point, because its noise control is passive only.
Side-by-Side: Which Should You Choose?
• Best for pure bass engineering on paper → エレコム(ELECOM) EHP-GB100ARD. External neodymium magnets, composite diaphragm, CCAW coil, aluminum rear housing and ducted semi-open airflow all target low frequencies.
• Best for quiet listening at low volume → Philips In-Ear Headphones Insert. Its isolation and vent-controlled bass are designed so you do not have to crank the volume.
• Best for fit options → エレコム(ELECOM) EHP-GB100ARD. Four ear-cap sizes (XS/S/M/L) versus three on the Philips, plus a pouch and cord keeper.
• Best for build feel → エレコム(ELECOM) EHP-GB100ARD. Aluminum rear housing and a lighter 8 g body versus silicone construction on the Philips.
• Best for cable management → Philips In-Ear Headphones Insert. Its cable winder handles both storage and length adjustment, which matters on a fixed 1.2 m cord.
• Best for the simplest setup → tie. Both are wired 3.5 mm, both 16 ohm, both adult in-ear designs. No charging, no codecs, no apps.
• Best for travel and commuting → Philips In-Ear Headphones Insert. Active cancellation plus a winder is the more practical travel combination.
I would buy the Philips In-Ear Headphones Insert. In my opinion, the combination of active noise cancellation, an acoustics vent tuned specifically for clean low frequencies, and an angled pipe that actually aims sound at your canal is the more complete package for how most people listen — on the move, in noise, at moderate volume. The Elecom EHP-GB100ARD is the more interesting bass design on paper, and if you want a red aluminum housing with four tip sizes and a ducted driver, it is a legitimate pick. But if you can only choose one and you want deep bass you can hear without drowning out the world around you, the Philips is the one I would reach for.
FAQ
what is deep bass in headphones
Deep bass refers to the lowest audible frequencies — the bottom of the roughly 20 Hz to 20 kHz range both of these earphones cover. In practice it is the sub-bass and low-bass energy you feel more than hear. Both models address it directly: Philips with an acoustics vent that controls low frequencies, Elecom with a 10 mm external-magnet driver and composite diaphragm.
That would be a different brand, so I cannot walk you through it from these data sheets. For reference, both earphones compared here are wired 3.5 mm models — the Philips uses a 3.5 mm jack and the Elecom uses a 3.5 mm three-pole mini plug — so there is no pairing step at all. You simply plug them into the source.
how to pair sony extra bass headphones
Same answer: pairing applies to wireless headphones, and neither of these is wireless. The Philips In-Ear Headphones Insert and the Elecom EHP-GB100ARD are both wired, 16-ohm in-ear models, so the setup is plug-and-play rather than a Bluetooth pairing routine. If you want a bass-forward earphone with no pairing hassle, that is exactly what these two offer.
how to connect jvc deep bass wireless headphones
I cannot cover JVC from these data sheets, but the question is worth answering generally: wireless models connect over Bluetooth, while deep-bass wired models like these connect through a 3.5 mm plug. The Elecom includes a pouch, cord keeper and four ear-cap sizes; the Philips includes three silicone cap sizes and a cable winder. Check the current price on Amazon before you commit, since both sit in the budget wired space.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Avantree Relay vs PinPure Transmitter Receiver, FIFINE AmpliGame AM8 vs kstime Computer Speakers, AHUIARGY Sleep Mask vs LC-dolida Sleep Eye Mask, COMPLY 100 vs Hurdilen 20: Noise Isolating Sleep Earbuds