DJI Phantom 2 Vision+ Vision Plus Blank or Black Screen Repair and Fix

Section 4: desolder, reassemble and go fly

1. If you have the good results, with boot success on the board, then
2. desolder everything,
3. reassemble the wifi module - it doesn't hurt to use some good heatsink paste when reassembling
4. put it into the bird, connect all the wires back up
5. screw it back together, fire it up
6. go fly!

I hope this was helpful. I'm OKSTUV on the phantompilots.com forums, but all the hard work was done by: Gaucho, andrew_by, and rmhome on the PhantomPilots.com "lightbridge firmware PROBLEM (and solution) - firmware version not found by dji assistant tool" thread.

If these instructions were helpful and saved you some money, please feel free to donate a little something as a way to say thanks: https://www.paypal.me/TGutmann

Navigation

Getting Started - Section 1 - Flashing - Section 2 - Validation - Section 3 - Wrapping up - Section 4

For questions, feedback or repair service inquiries, please find my contact details here: http://scr.im/okstuv