Industrial Effluent Treatment Plant Process

The Effluent Treatment Plant Process Varies From One Industry To Another Depending On The Type Of Industry. However, The Common Effluent Treatment Plant Process Involves Filtering The Industrial Effluents Using The Effluent Treatment Plant, Separating The Solid Or Other Effluents From The Waste Water, And Then Releasing The Purified Water For Reuse. The Industrial Effluent Treatment Plant Process Is Done Through Four Levels. Let’s Study The Four Different Levels In Detail.

1-Preliminary Treatment

The Preliminary Treatment Level Includes Separating The Large-Sized Effluents Such As Wood Logs, Paper, Plastic, Cloths, And Other Contaminants From The Industrial Waste Water Physically. This Method Is Followed By Further Four Levels:

• Screening: The First Step Of The Preliminary Treatment Is Taken By Following A Screening Process Where A Screen With Identical Vents Is Used To Remove The Large-Sized Floating Solid Particles From The Industrial Waste Water.

• Sedimentation: This Process Involves Removing The Suspended Solid Particles From The Water Physically Using Gravitational Force.

• Grit Chamber: A Grit Chamber Is Used To Remove Thick And Heavy Solids Such As Sand And Metals To Prevent Their Outflow Into The Sewers Which Can Damage Operational Tools.

• Clarifiers: Clarifiers Indicate Tanks That Are Specially Built For The Continuous Removal Of Solids Deposited Due To The Sedimentation Process.

2. Primary Treatment

This Treatment Level Requires Both Physical And Chemical Methods To Remove The Suspended Organic Particles And Other Settleable Matters From The Industrial Waste Water. This Involves The Following Methods:

• Flocculation: This Is A Physical Process That Involves Adding Undermined Particles Into A Large Heap. This Is Done To Easily Remove The Weakened Particles From The Water.

• Coagulation: In This Process, Coagulants Are Mixed With The Tiny Solid Particles For Rapid Settlement And Converting Them Into Larger Masses Which Can Be Further Removed Through The Process Of Sedimentation And Filtration.

• Neutralization: This Process Helps To Maintain The PH Level Of 6 To 9 So That It Can Be Used For Further Process Of The Effluent Treatment Plant.

• Clarifiers: Primary Clarifiers Are Used For Easing The Flow Of Water To A Certain Level That The Organic Particles Subside In The Bottom Of The Tank.

4.Disinfection Treatment (Advanced)

This Is The Final Level Of Effluent Treatment Plant Process Which Is Also Known As A Tertiary Or Advanced Treatment. The Main Purpose Of This Treatment Is To Process The Water To Meet A Desired Level Of Quality Before It Is Reused.

• Chemical Coagulation And Sedimentation: This Process Is Performed After The Primary And Secondary Treatment To Remove The Solid Matter From The Waste At An Increasing Rate.

• Filtration: To Further Improve The Quality Of The Water, The Refined Waste Water Is Processed Again By Passing It Through The Adjacent Filtration Plant. This Filtration Plant Has Large Blocks Which Ensure The High Quality Of The Water.

• Reverse Osmosis: Certain Amount Of Pressure Is Used In This Process. It Helps In Retaining The Remaining Pollutants Of The Water While Allowing The Clean Water To Pass From The Other Side.

• UV Disinfection: At The Final Stage Of The Effluent Treatment Plant Process, UV Disinfectants Are Used To Make Sure No Residual Pollutants Are Left In The Water. This Disinfectant Is Ideal For Industrial Waste Water And Is Commonly Used In The Effluent Treatment Plant Process To Ensure A Standard Quality Of The Water.

Read More: ETP Plant Manufacturer and Services