Thesis

▶ 국제 학술지

  • Hyunah Lee, Nam-Joo Cho and Dong-soo Kim, Development of a Novel Reverse Offset Printer Equipped with Double-Layer Blanket (DLB) for Micropattern Printing on 3D Curved Surfaces, MDPI processes, 10, 424(1-10), Fab 2022.

  • Kyeong Min Yu, So-Hyun Lee, En-Kyung Non, Ju-Ryong Kim, Bo Mi Lee, Dong-Soo Kim and Min-Hoi Kim, High-resolution continuous microcontact printing on various substrates for organic and oxide electronics, Flexible and Printed Electronics, 6, 020511(1-9), Jul 2021.

  • Jin-Oh Kim, Won-Tae Koo, Hanul Kim, Chungseong Park, Taehoon Lee, Calvin Andreas Hutomo, Siyoung Q. Choi, Dong Soo Kim, Il-Doo Kim and Steve Park, Large-area synthesis of nanoscopic catalyst-decorated conductive MOF film using microfluidic-based solution shearing, Nature Communications, 12, 4294(1-9), Jul 2021.

  • SeJung Kim ,Tanyoung Kim, Dongsoo Kim and Byeong-Kwon Ju, Layer-by-Layer Assembled Nano-Composite Multilayer Gas Barrier Film Manufactured with Stretchable Substrate, MDPI applied sciences, 11, 5794(1-8), Jun 2021.

  • Sung Hyun You, Koo Bonn, Dong Soo Kim and Seok-Kyoon Kim, Cascade-Type Pole-Zero Cancellation Output Voltage Regulator for DC/DC Boost Converters, MDPI Energies, 14, 3824(1-14), Jun 2021.

  • JinAh Hwang, Hyunsung Jung, Hyo-Soon Shin, Dae-Sung Kim, Dong Soo Kim, Byeong-Kwon Ju and MyoungPyo Chun, The Effect of Noble Metals on Co Gas Sensing Properties of In2O3 Nanoparticles, MDPI applied sciences, 2021(11), 11(1-17), May 2021.

  • Muchakayala Ravi, Sanghoon Kim, Fen Ran, Dong Soo Kim, Yong Min Lee, Myung-Hyun Ryou, Hybrid gel polymer electrolyte based on 1-methyl-1-Propylpyrrolidinium Bis(Trifluoromethanesulfonyl) imide for flexible and shape-variant lithium secondary batteries, Journal of Membrane Science, 621, 119018(1-8), Dec 2020.

  • Kyunghwan Choi, Dong Soo Kim and Seok-Kyoon Kim, Disturbance Observer-Based Offset-Free Global Tracking Control for Input-Constrained LTI Systems with DC/DC Buck Converter Applications, MDPI Energies, 13, 4079(1-18), Aug 2020.

  • Minsook Yu, Munyong Song, Minha Kim and Dongsoo Kim, Experimental study on the formability of aluminum pouch for lithium polymer battery by manufacturing processes, Journal of Mechanical Science and Technology, 33(9), 4353-4359, May 2019.

  • Jung Min Cho, Do Hyun Kim, Min Sook Yoo, Sungwoo Bae and Dong Soo Kim, Fabrication and Evaluation of Aluminum Laminated Film for a Pouch-Type Secondary Battery, Journal of Nanoscience and Nanotechnology, 18(4), 2752-2757, Apr 2018.

  • Dong Soo Kim, Sung Woo Bae, Do Hyun Kim, Jung Min Cho and Min Sook Yu, Study of Extrusion Process for Pouch Film Manufacturing, International Journal of Precision Engineering and Manufacturing, 18(9), 1307-1311, May 2017.

  • Jung Min Cho, Do Hyun Kim, Min Sook Yoo, Sungwoo Bae and Dong Soo Kim, The Fabrication of Flexible Ag Grid Mesh Electrode by a New Thermal Roll Imprinting Process and Its Application, Journal of Nanoscience and Nanotechnology, 17(5), 3304-3309, May 2017.

  • Min Sook Yu, Do Hyun Kim, Jung Min Cho, Sung Woo Bae and Dong Soo Kim, Effect of film properties on formability of aluminum pouch for secondary battery, Journal of Mechanical Science and Technology, 31(6), 2759-2763, Feb 2017.

  • Min Sook Yu, Do Hyun Kim, Jung Min Cho, Sung Woo Bae and Dong Soo Kim, Effect of film properties on formability of aluminum pouch for secondary battery, Journal of Mechanical Science and Technology, 31, 2759-2763, Feb 2017.

  • Jung Min Cho, Dong Soo Kim, Sungwoo Bae, Sang-Jin Moon, Won Suk Shin, Dong Hun Kim, Sun Hee Kim, Andreas Sperlich, Stefan Vath, Vladimir Dyakonov and Jung-Keun Lee, Light-induced electron spin resonance study of galvinoxyl-doped P3HT/PCBM bulk heterojunctions, Organic Electronics, 27, 119-125, Sep 2015.

  • Joong Kook Hwang, Sungwoo Bae and Dong Soo Kim, A development and evaluation of micro-gravure coater for printed electronics, Japanese Journal of Applied Physics, 53(5S3), 05HC12(1-4), Apr 2014.

  • Dong Soo Kim, Jung Su Kim and Min Cheol Lee, Thin film forming technique based on hybrid spray coating using electrostatic force and air pressure, Japanese Journal of Applied Physics, 53(553), 05HC08(1-7), Apr 2014.

  • Taik-Min Lee, Jae-Ho Noh, Inyoung Kim, Dong-Soo Kim and Sangki Chun, Reliability of gravure offset printing under various printing conditions, Journal of Applied Physics, 108, 102802(1-6), Nov 2010

  • Taik-Min Lee, Seung-Hyun Lee, Jae-Ho Noh, Dong-Soo Kim and Sangki Chun, The effect of shear force on ink transfer in gravure offset printing, Journal of Micromechanics and Microengineering, 20(12), 125026(1-8), Nov 2010.

  • Saleem Khan, Yang Hoi Doh, Arshad Khan, Ahsan Rahman, Kyung Hyun Choi and Dong Soo Kim, Direct patterning and electrospray deposition through EHD for fabrication of printed thin film transistors, Current Applied Physics, 11(1), S271-S279, Nov 2010.

  • Dewan Hasan Ahmed, Hyung Jin Sung and Dong-Soo Kim, Simulation of non-Newtonian ink transfer between two separating plates for gravure-offset printing, International Journal of Heat and Fluid Flow, 32(1), 298-307, Jul 2010.

  • Jeongdai Jo, Jong-Su Yu, Taik-Min Lee, Dong-Soo Kim and Kwang-Young Kim, Roll-Printed Organic Thin-Film Transistor Using Patterned Poly(dimethylsiloxane) (PDMS) Stamp, Journal of Nanoscience and Nanotechnology, 10(5), 3595-3599, May 2010.

  • Seung Wook Suh, Yong Sang Lee, Byung Ki Park and Dong Soo Kim, Synthesis of Pd(II) Ink and Surface Treatment of the Polyimide Film for Inkjet Printing, Japanese Journal of Applied Physics, 49(5), 05EA06(1-5), May 2010.

  • Kwangsoo Kim, Chung Hwan Kim, Heon-Yeoung Kim and Dong-Soo Kim, Effects of Blanket Roller Deformation on Printing Qualities in Gravure-Offset Printing Method, Japanese Journal of Applied Physics, 49(5), 05EC04(1-5), May 2010.

  • Jeongdai Jo, Jong-Su Yu, Taik-Min Lee, Dong-Soo Kim and Kwang-Young Kim, Fabrication of Organic Thin-Film Transistors with Roll-Printed Electrodes Using Patterned Polymer Stamp, Molecular Crystals and Liquid Crystals, 514(1), 81/[411]-91/[421], Nov 2009.

  • Jung Su Kim, Kyung Hyun Choi, Kang Dae Kim, Chung Hwan Kim, Sung Woo Bae and Dong Soo Kim, An application of ESD technology for the R2R printing process, Journal of Mechanical Science and Technology, 24(1), 301-305, Oct 2009.

  • Byung-Oh Choi, Chung Kyun Kim and Dong Soo Kim, Manufacturing ultra-high-frequency radio frequency identification tag antennas by multilayer printings, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224(1), 149-156, Aug 2009.

  • Hyung-Chan Kim, Kyung-Hyun Choi, Yang-Hoi Doh and Dong-Soo Kim, Fabrication of parts and their evaluation using a dual laser in the solid freeform fabrication system, Journal of Materials Processing Tech, 209(10), 4857-4866, Jun 2009.

  • Khalid Rahman, Jeong-Beom Ko, Saleem Khan, Dong-Soo Kim and Kyung-Hyun Choi, Simulation of droplet generation through electrostatic forces, Journal of Mechanical Science and Technology, 24(1), 307-310, May 2009.

  • Jeongdai Jo, Jong-Su Yu, Taik-Min Lee and Dong-Soo Kim, Fabrication of Printed Organic Thin-Film Transistors Using Roll Printing, Japanese Journal of Applied Physics, 48(4S), 04C181(1-4), Apr 2009.

  • Hyun Wook Kang, Hyung Jin Sung, Taik-Min Lee, Dong-Soo Kim and Chang-Jin Kim, Liquid transfer between two separating plates for micro-gravure-offset printing, Journal of Micromechanics and Microengineering, 19(1), 015025(1-10), Dec 2008.

  • Kyung-Hyun Choi, Hyung-Chan Kim, Yang-Hoi Doh and Dong-Soo Kim, Novel scan path generation method based on area division for SFFS, Journal of Mechanical Science and Technology, 23, 1102-1111, Nov 2008.

  • Jong-Su Yu, Jeongdai Jo, Dong-Soo Kim and Do-Jin Kim, Direct-Printed Organic Thin-Film Transistor Using PDMS Stamp and Low Viscosity Nanosilver Ink, Journal of Nanoscience and Nanotechnology, 8(10), 4940-4944, Oct 2008.

  • Kang Dae Kim, Dong Soo Kim, Chung Kyun Kim and Chung Kun Song, Nano Gate Dielectrics for Low Voltage Operation of Organic Thin Film Transistors, Japanese Journal of Applied Physics, 47(8R), 6496-6501, Aug 2008.

  • Taik-Min Lee, Tae Goo Kang, Jeong-Soon Yang, Jeongdai Jo, Kwang-Young Kim, Byung-Oh Choi, and Dong-Soo Kim, Drop-on-demand solder droplet jetting system for fabricating microstructure, IEEE Transactions on Electronics Packaging Manufacturing, 31(3), 202-210, Jul 2008.

  • Taik-Min Lee, Tae Goo Kang, Jeong-Soon Yang, Jeongdai Jo, Kwang-Young Kim, Byung-Oh Choi, and Dong-Soo Kim, Gap adjustable molten metal DoD inkjet system with cone-shaped piston head, Journal of Manufacturing Science and Engineering, 130(3), 031113(1-6), Jun 2008.

  • Dong Soo Kim, Sung Woo Bae and Kyung Hyun Choi, Application and performance evaluation for the DMS system in the SLS process, International Journal of Modern Physics B, 22(09n11), 1833-1838, Jan 2008.

  • Jung Su Kim, Dong Soo Kim, Min Cheol Lee and Won Hee Lee, A method of 3D freeform fabrication using a curing of photopolymer resin, International Journal of Modern Physics B, 22(09n11), 1839-1845, Jan 2008.

  • Dong-Soo Kim, Sung Woo Bae and Kyung Hyun Choi, Development of industrial SFF system using dual laser and optimal process, Robotics and Computer-Integrated Manufacturing, 23(6), 659-666, Dec 2006.

  • Hyuneui Lim, Dong soo Kim, Won hee Lee, Yong doo Park and Kyu back Lee, Production of protein microarrays for cell culture using electrostatic deposition, Sensors and Actuators A: Physical, 139, 124-130, Apr 2007.

  • Kyung-Hyun Choi, Dong-Soo Kim and Yang-Hoi Doh, Multi-agent-based task assignment system for virtual enterprises, Robotics and Computer-Integrated Manufacturing, 23(6), 624-629, Feb 2007.

  • Dong-Soo Kim, Sang-Kyu Bae and Kyung-Hyun Choi, Characteristic analysis and experimental evaluation of Fluidic muscle cylinder, Key Engineering Materials, 326-328, 119-122, Dec 2006.

  • Dong-Soo Kim, Sang-Kyu Bae and Byung Oh Choi, Experiments and Characteristic Analysis of Sealless Pneumatic Cylinder, Key Engineering Materials, 326-328, 1279-1282, Dec 2006.

  • Taik-Min Lee, Tae Goo Kang, Jeong-Soon Yang, Dong-Soo Kim, Jeong-Dai Jo, Byung-Oh Choi and Kwang-Young Kim, A DoD Injector Applicable to High- Viscosity Materials in High - Temperature, Key Engineering Materials, 326-328, 1391-1394, Dec 2006.

  • Won Hee Lee, Dong Soo Kim, Young Jin Ahn, Byung-Oh Choi and Kyung Hyun Choi, Development of Industrial SFF System Using a New Selective Dual-Laser Sintering Process, Key Engineering Materials, 326-328, 123-126, Dec 2006.

  • Won-Hee Lee, Dong-Soo Kim, Jung-Su Kim and Min-Cheol Lee, A Study on Reduction of Processing Time and Improvement of Strength by Using Photopolymer Resin in the 3DP Process, Key Engineering Materials, 326-328, 151-154, Dec 2006.

  • Dong-Soo Kim, Sang-Kyu Bae and Byung Oh Choi, Experiments and Characteristic Analysis of a Sealless Pneumatic Cylinder, Key Engineering Materials, 326-328, 1279-1282, Dec 2006.

  • Dong Soo Kim, Young Jin Ahn, Won Hee Lee, Sung Woo Bae and Kyung Hyun Choi, A Study of the Solid Freeform Fabrication (SFF) System with Dual Laser System, JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing, 49(4), 1215-1222, Mar 2005.

  • Jae Seop Ryu, Yingying Yao, Chang Seop Koh, Sonam Yun and Dong Soo Kim, Optimal shape design of 3-D nonlinear electromagnetic device using parameterized design sensitivity analysis, IEEE Transactions on Magnetics, 41(5), 1792-1795, May 2005.

  • Dong-Soo Kim and Won-Hee Lee, Development of an automated system for water-hydraulic and leakage test of pressure vessels, International Journal of Precision Engineering and Manufacturing, 5(1), 55-59, Jan 2004.

  • Dong-Soo Kim and Sang-Chun Lee, Experimental study on cushioning characteristics of pneumatic cylinder with meter in/meter out control system, International Journal of Precision Engineering and Manufacturing, 3(1), Jan 2002.

▶ 국내 학술지

  • 김이지, 이현아, 김동수, 고속 메니스커스 솔루션 시어링 코팅 가시화 장치를 이용한 페로브스카이트 결정화, 한국정밀공학회지, 제38권 제12호, 965-972, 2021년 12월

  • 박재경, 김동수, 김석균, 외란 관측기와 적분기 결합형 영구자석동기전동기 강인 속도추종 알고리즘, 제어.로봇.시스템학회 논문지, 제27권 제10호, 711-720, 2021년 8월

  • 성백상, 조재혁, 임영지, Akpeko Gasonoo, 이현아, 이장원, 우승완, 김동수, 이재현, 김민회, 이종희, Island 표면구조의 P(VDF-TrFE) 몰드를 임프린트한 Spike 형태의 고투과성 외부광추출 필름, 전기전자학회논문지, 제25권 제2322호, 89-96, 2021년 2월

  • 박재경, 김동수, 김석균, 능동 댐핑 주입과 외란 관측기 기반 선형 운동 도립진자 비선형 위치 제어, 제어.로봇.시스템학회 논문지, 제26권 제7호, 534-541, 2020년 7월

  • 김용훈, 김동수, 김석균, 관측기 기반 온라인 자가동조 선형운동 도립진자 위치제어, 제어.로봇.시스템학회 논문지, 제26권 제7호, 526-533, 2020년 7월

  • 김동수, 배성우, 김도현, 조정민, 유민숙, 파우치 필름의 열융착강도 연구, 한국정밀공학회지, 제35권 제2호, 219-223, 2017월 9월.

  • 김동수, 배성우, 김도현, 조정민, 유민숙, 압출 수지에 따른 파우치 필름의 접착강도 및 내전해액성 연구, 한국정밀공학회지, 제34권 제9호, 659-662, 2017월 9월.

  • 조정민, 김도현, 유민숙, 배성우, 김동수, 이차전지용 파우치 필름의 합지 조건에 따른 알루미늄 층과 실런트층 간 물성조사, 한국정밀공학회지, 제34권 제5호, 337-341, 2017년 5월.

  • 유민숙, 김도현, 조정민, 배성우, 김동수, 성형성에 따른 이차전지 파우치의 물성에 대한 실험적 연구, 한국정밀공학회지, 제33권 제2호, 149-155, 2016년 2월.

  • 유민숙, 김도현, 조정민, 배성우, 김동수, 이차전지용 알루미늄 파우치 필름의 제조 공정 변수에 따른 접착력에 대한 연구, 한국정밀공학회지, 제33권 제2호, 149-155, 2016년 1월.

  • 김정수, 김동수, 임의 전압파형발생기를 이용한 다중 피에조 잉크젯 3D 프린팅 장비 개발, 한국정밀공학회지, 제32권 제9호, 781-786, 2015년 8월.

  • 안영진, 배성우, 김동수, 김재열, Powder Bed Fusion 시스템의 개발 및 소결 공정 특성에 관한 연구, 한국정밀공학회지, 제32권 제9호, 773-779, 2015년 8월.

  • 김동수, 배성우, 김도현, 조정민, 유민숙, PBF 시스템에서 고분자 및 금속 소재 적용성 연구, 한국정밀공학회지, 제32권 제9호, 765-771, 2015년 8월.

  • 김도현, 배성우, 조정민, 유민숙, 김동수, 다양한 표면처리에 따른 리튬이온 이차전지용 파우치 필름을 위한 접착성에 관한 연구, 한국정밀공학회지, 제33권 제3호, 231-234, 2015년 1월.

  • 전선웅, 김철, 박종찬, 김동수, 김충환, 인쇄 패턴의 기하학적 특성 측정 및 인쇄성 평가, 한국정밀공학회지, 제31권 제11호, 981-986, 2014년 11월.

  • 전선웅, 박종찬, 남기상, 김철, 김동수, 김충환, 데이터 보상을 통한 롤투롤 인쇄 장비의 레지스터 오차 인식 개선 및 제어, 한국정밀공학회지, 제31권 제11호, 987-992, 2014년 11월

  • 조정민, 김동수, 조정대, 김태일, 가열롤 임프린팅 방법을 이용한 유연 유기태양전지용 AG 그리드 패턴 PET 기판 제작, 한국정밀공학회지, 제31권 제11호, 993-998, 2014년 11월.

  • 김정수, 김동수, 그리비어 옵셋을 이용한 메탈 그리드 메쉬 필름 제작 기법, 한국정밀공학회지, 제31권 제11호, 969-974, 2014년 10월.

  • 남기상, 윤성만, 이승현, 김동수, 김충환, 그라비어 방식을 이용한 전극 인쇄 시 전도성 잉크의 물성이 인쇄성에 미치는 영향, 한국정밀공학회지, 제30권 제6호, 573-577, 2013년 6월.

  • 김정수, 김동수, 공압과 정전기력을 이용한 스프레이 박막 코팅 기술 개발, 한국정밀공학회지, 제30권 제6호, 567-572, 2013년 6월.

  • 김동수, 김정수, 배성우, 마이크로 그라비어 코터를 이용한 박막 형성 기술, 한국정밀공학회지, 제30권 제6호, 596-600, 2013년 6월.

  • 배성우, 유성연, 김동수, SLS 공정에서 최적 공정 조건 도출을 위한 실험적 연구, 한국생산제조학회지, 제21권 제3호, 516-524, 2012년 2월.

  • 노재호, 이택민, 박상호, 조정대, 김동수, 그라비아 옵셋 인쇄 장비 설계 및 제작, 한국정밀공학회지, 제27권 제9호, 16-19, 2010년 10월.

  • 배성우, 유성연, 김동수, SLS 공정에서 레이저 스캔 패스에 따른 기계적 특성에 관한 실험적 연구, 한국정밀공학회지, 제26권 제8호, 29-34, 2009월 8월.

  • 김정수, 김동수, 이민철, UV경화공정을 이용한 3차원 Metal Powder 조형기법, 한국정밀공학회지, 제26권 제8호, 24-28, 2009월 8월.

  • 김민하, 이현아, 김동수, PEEK 소재용 바이오 메디컬 3D프린팅 장비 개발 및 최적 공정 연구, 대한기계학회논문집, 제7권 제2호, 59-66, 2009년 3월.

  • 신동윤, 김동수, 생산시스템으로서의 잉크젯 신뢰성 및 교정의 중요성, 한국정밀공학회지, 제23권 제8호, 9-16, 2008월 8월.

  • 김강대, 조정대, 이택민, 김충환, 신동윤, 김동수, 최병오, 유기박막 트랜지스터를 위한 프린팅과 자기정렬공정의 결합기술, 한국정밀공학회지, 제25권 제8호, 17-20, 2008월 6월.

  • 김충환, 이용식, 김영국, 김동수, 인쇄 UHF RFID 태그 안테나의 인쇄 품질에 따른 공진 주파수의 영향, 한국정밀공학회지, 제25권 제11호, 90-94, 2008년 9월.

  • 김동수, 최두선, 최병오, 김성종, 디지털 3차원 실물복제기 개발사업, 기계와 재료 2004 봄호, 제25권 제7호, 6-13, 2008년 7월

  • 김정수, 이민철, 김동수, UV 경화를 이용한 3차원 임의 형상 시스템 개발, 한국정밀공학회지, 제25권 제7호, 33-38, 2008년 7월

  • 전유림, 이민철, 송영은, 유기호, 김정수, 김동수, 임의형상제작을 위한 멀티헤드제어 패턴그라이버 개발, 한국정밀공학회지, 제25권 제7호, 27-32, 2008년 7월.

  • 김동수, Electro-Static inkjet 프린팅 기술 개발 현황, 기계와 재료, 제20권 제1호, 2008년 7월.

  • 김동수, Drop on Demand 인쇄 전자기기용 정전식 잉크젯 시스템, 기계와 재료, 제20권 제2호, 2008년 7월

  • 김동수, 외팔보 타입의 인쇄전자소자용 롤투롤 장비 개발, 기계와 재료, 제20권 제2호, 2008년 7월.

  • 배성우, 김동수, 최경현, 산업용 SFF 시스템에서 DMS 적용에 관한 연구, 한국정밀공학회지, 제25권 제7호, 13-18, 2008년 7월.

  • 최경현, 김형찬, 도양회, 김동수, 효과적인 SFF 시스템을 위한 디지털미러시스템 공정 개발, 한국정밀공학회지, 제25권 제7호, 19-26, 2008년 7월.

  • 김동수, 김강대, 김명섭, 배성우, 김정수, 플렉시블 전자소자 개발을 위한 프린팅 생산 기술, 한국정밀공학회 2008년도 춘계학술대회논문집, 959-960, 2008년 6월.

  • 김충환, 최병오, 김동수, 류병순, 인쇄전자를 위한 그라비아 옵셋 인쇄, 한국정밀공학회지, 제25권 제5호, 96-102, 2008년 5월.

  • 김명섭, 김동수, 김충환, 최병오, 롤투롤 프린팅 공정 장비의 개발, 기계와 재료, 제19권 제4호, 94-103, 2008년 1월.

  • 김충환, 이택민, 김동수, 최병오, 전자 인쇄에서의 인쇄 패턴 왜곡, 한국정밀공학회지, 제24권 제8호, 74-80, 2007년 8월.

  • 김동수, 인쇄전자기술, 기계와 재료, 제19권 제4호, 2007년 12월.

  • 이택민, 강태구, 양정순, 조정대, 김광영, 최병오, 김동수, DoD 메탈젯 프린팅 시스템, 한국정밀공학회지, 제23권 제8호, 22-26, 2006년 8월.

  • 김석순, 김동수, 이원희, 신동윤, 김충환, 제조 방식의 대변화에 따른 잉크젯 프린팅 기술, 한국정밀공학회지, 제23권 제8호, 15-21, 2006년 8월.

  • 이원희, 김정수, 김동수, 이민철, 잉크젯 기술을 이용한 3차원 프린팅 공정, 한국정밀공학회지, 제23권 제8호, 33-38, 2006년 8월.

  • 김동수, 이원희, 신동윤, 임현의, 정전기력을 이용한 마이크로/나노 프린팅 기술, 한국정밀공학회지, 제23권 제8호, 27-32, 2006년 8월.

  • 신동윤, 이원희, 강태구, 김동수, 잉크젯 공정의 이슈들, 한국정밀공학회지, 제23권 제8호, 7-14, 2006년 8월.

  • 이원희, 김동수, 김정수, 이민철, 3차원 프링팅(3DP) 공정을 기반으로 한 임의형상제작(SFF) 시스템 개발에 관한 연구, 한국정밀공학회지, 제23권 제7호, 168-176, 2006년 7월.

  • 윤희성, 황인성, 김동수, 윤소남, 고창섭, 반응표면법을 이용한 최소동작시간을 갖는 DC 솔레노이드 밸브의 형상 최적 설계, 전지학회논문지 B권, 제55권 제9호, 449-458, 2006년 7월.

  • 김동수, 이원희, 안영진, 장민호, 최경현, 디지털 3차원 실물복제기 시스템 및 공정기술 개발, 한국정밀공학회지, 제23권 제4호, 183-190, 2006년 4월.

  • 최재원, 최경현, 김동수, 도양회, 이석희, SFFS에서 듀얼 레이저를 이용한 부품 제작 및 평가, 대한기계학회논문집 A권, 제30권 제3호, 334-341, 2006년 2월.

  • 허신, 김완두, 홍성인, 김동수, 배상규, 공기압 근육 구동기의 유한요소 해석 및 성능 시험, 대한기계학회논문집 A권, 제30권 제6호, 662-669, 2006년 2월.

  • 이택민, 강태구, 양정순, 조정대, 김광영, 최병오, 김동수, DoD 메탈젯 시스템의 이론적 해석 및 실험적 분석, 대한기계학회논문집 A권, 제31권 제1호, 11-17, 2006년 11월.

  • 김영철, 김동수, 시일이 없는 공기실린더용 피스톤의 성능해석, 한국트라이볼로지학회, 제21권 제1호, 27-32, 2005년 2월.

  • 김광영, 김동수, 강정호, 항공기 기체 가공용 대용량 절삭칩 회수 장치의 설계 평가, 한국생산제조학회지, 제14권 제6호, 110-116, 2005년 12월.

  • 김동수, 초절전형 마이크로 밸브 해석 및 설계, 유공압시스템학회논문집, 제1권 제2호, 15-19, 2004년 6월.

  • 김동수, 벨로우즈 실린더 특성해석 및 마찰력 실험, 한국산학연논문집, 제4권 제2호, 2004년 6월.

  • 이원희, 이택민, 김동수, 오피스용 sffs 기술 개발, 기계와 재료 2004 봄호, 제16권 제1호, 43-49, 2004년 4월.

  • 김동수, 김성종, 배상규, 벨로우즈형 로드리스 실린더 특성해석 및 실험에관한 연구, 대한기계학회 2004년도 춘계학술대회 논문집, 973-977, 2004년 4월.

  • 김성종, 김동수, 이승현, 고성능 씰리스실린더의 해석및 누설유량시험, 대한기계학회 2004년도 춘계학술대회 논문집, 961-966, 2004년 4월.

  • 김동수, 이원희, 최병오, 직동식 공기압 서보밸브 개발, 한국기계연구원 연구논문집, 제34권, 69-77, 2004년 4월.

  • 김동수, 이원희, 선박용 공기압 회전작동기 개발, 한국마린엔지니어링학회지, 제28권 제2호, 354-360, 2004년 1월.

  • 김동수, 100Hz급 직동식 공기압 서보밸브 개발, 기계기술, 제30권 제9호, 6-13, 2003년 9월.

  • 이원희, 김동수, 이승현, 김광영, 압력용기의 수압및 기밀시험을 위한 자동화시스템 개발, 한국정밀공학회 2003년도 춘계학술대회논문집, 1672-1675, 2003년 6월.

  • 김동수, 고응답 마이크로 밸브 전자석의 해석및 최적설계, 한국산학연논문집, 제3권 제1호, 2003년 3월.

  • 김동수, 공기압 서보액추에이터 기술, 자동화기술, 제19권 제11호, 2-7, 2003년 11월.

  • 김동수, 이원희, 이택민, 조정대, 윤소남, 최두선, 김광영, 최병오, 산업용및 오피스용 디지털 3차원 실물복제기 핵심요소기술 개발, 한국정밀공학회 2003년도 추계학술대회 논문 요약집, 한국정밀공학회 2003년도 추계학술대회 논문 요약집, 104-107, 2003년 10월.

  • 김동수, 이원희, 이택민, 조정대, 윤소남, 최두선, 김광영, 최병오, 산업용 및 오피스용 실물복제기 요소기술 개발, 한국정밀공학회 2003년도 추계학술대회논문요약집, 29-35, 2003년 10월.

  • 김동수, 진공펌프 설계 및 해석, 한국산학연논문집, 제2권 제2호, 2002년 7월.

  • 김동수, 김광영, 최병오, 박화영, 반도체장비용 오링의 내구성 및 기밀성 시험평가기술에 관한 연구, 한국정밀공학회 2001년도 춘계학술대회 논문집, 613-617, 2001년 4월.

  • 김동수, vane motor 특성해석및 실험, 대한기계학회, 2001년 4월.

  • 김동수, 공기압 필드버스 제어시스템 설계 및 성능평가 기술에 관한 연구, 한국산학연논문집, 제1권 제2호, 2001년 11월.

  • 김동수, 김유일, 김미성, 공압베인모터 설계및 성능특성에 관한 실험적고찰, 한국정밀공학회 2001년도 추계학술대회 논문집, 472-475, 2001년 10월.

  • 김동수, 100Hz servo valve개발, 제어자동화학회, 2000년 3월.

  • 김동수, 이상천, 메타인및 메타아웃 제어에 의한 공기압 실린더의 쿠션특성에 관한 실험적 연구, 한국정밀공학회지, 제17권 제2호, 97-104, 2000년 2월.

  • 김동수, 공기압쿠션실린더, 대한기계학회, 1999년 12월.

  • 김동수, 공기압실린더 쿠션특성해석및 설계, 박용기관학회, 1999년 12월.

  • 김동수, 이상천, 공기압실린더의 쿠션특성에관한 모델링및 컴퓨터시뮬레이션, 속보연구논문, 제72권, 794-805, 1999년 11월.

  • 김동수, 정압베어링형 유압서보실린더 개발, 대한기계학회, 1998년 1월.

  • 김동수, 김광영, 최병오, 박화영, 저마찰,고속 공압실린더 특성 연구, 한국정밀공학회 1997년도 추계학술대회 논문집, 476-479, 1997년 10월.

▶ 국제 학술대회 논문

  • Dong Soo Kim, All Printed SWCNT-TFT Using Fully Revers-Offset Printer on Flexible Substrate, PRESM 2020, Seoul, Korea, November 14-18, 2020.

  • Dong Soo Kim, Development and technical improvement of the PBF 3D printer for biomedical and smart mould-base application, PE USA 2018, Santa Clara, California, November 14-15, 2018.

  • Dong Soo Kim, Study on manufacturing process of flexible printed Organic Solar Cell module using solution shearing coating method, PE USA 2018, Santa Clara, California, November 14-15, 2018.

  • Dong Soo Kim, Development of printed battery pack for electric vehicles, PE USA 2018, Santa Clara, California, November 14-15, 2018.

  • Dong Soo Kim, Development of Powder Bed Fusion 3D Printer for Biomedical Application, ETME 2018(Emerging Technologies in Mechanical Engineering), Ramada Plaza Jeju Hotel, Jeju, Korea, August 19-22, 2018.

  • Dong Soo Kim, Development of Printed Organic Solar Cell (OSC) for Energy Application, Ramada Plaza Jeju Hotel, Jeju, Korea, August 19-22, 2018.

  • Dong Soo Kim, The Experimental Study on the Property change of Aluminum pouch after forming process, Ramada Plaza Jeju Hotel, Jeju, Korea, August 19-22, 2018.

  • Dong Soo Kim, Study on the powder bed fusion 3D printer and optimization sintering process for SUS materials, Ramada Plaza Jeju Hotel, Jeju, Korea, August 19-22, 2018.

  • Minsook Yu, Munyong Song, Minha Kim, Hyunah Lee and Dongsoo Kim, Development of the roll to roll gravure coater for printed pouch of Battery, ANM 2018(11th International conference on Advanced Nano Materials), University of Aveiro, Portugal, July 18-20, 2018.

  • Dong Soo Kim, Development of the high speed and precision PBF 3D Printing process equipment for biomedical applications, PRESM 2018(International Symposium on PRecision Engineering and Sustainable Manufacturing), Sapporo, Japan, July 3-7, 2018.

  • Dong Soo Kim, Development of R2R micro-gravure coating laminate system and application of battery parts for electric vehicles, PRESM 2018(International Symposium on PRecision Engineering and Sustainable Manufacturing), Sapporo, Japan, July 3-7, 2018.

  • Dong Soo Kim, Development and Fabrication of the Aluminum pouch of polymer battery for electric vehicles by using gravure coater, LOPEC 2018(International Exhibition and Conference for the Printed Electronics Industry), Munich, Germany, March 13-15, 2018.

  • Dong Soo Kim, Experimental study on the change of Aluminum pouch after forming process, ICFPE 2017, The SHILLA HOTEL, Jeju Island, Korea, September 4-7, 2017.

  • Dong Soo Kim, Study on manufacturing process of the pouch film for lithium-ion battery technology, ICFPE 2016, Yonezawa City, Yamagata, Japan, September 6-8. 2016.

  • Dong Soo Kim, Study on formability of the aluminum pouch for secondary battery by properties of films, ICFPE 2016, Yonezawa City, Yamagata, Japan, September 6-8. 2016.

  • Dong Soo Kim, Fabrication of the ITO free flexible Ag grid mesh electrode by thermal roll-imprinting method for organic solar cells, ICMR 2015(International Conference on Material and Reliability), Ramada Plaza Jeju Hotel, Jeju, Korea, November 23-25, 2015.

  • Jung Min Cho, Do Hyun Kim, Min Sook Yoo, Sung woo Bae and Dong Soo Kim, A Study on Manufacture and Assessment of Aluminum Laminated Film for a Pouch-Type Secondary Battery, ICAE 2015(International Conference on Advanced Electromaterials), Venue, ICC Jeju, Korea, November 17-20, 2015.

  • Sungwoo Bae and Dong Soo Kim, An Experimental study on Surface treatment of aluminum film for improving the hydrophilicity by using the deep coating method in the aluminum pouch of lithium-ion secondary battery, ICAE 2015(International Conference on Advanced Electromaterials), Venue, ICC Jeju, Korea, November 17-20, 2015.

  • Dong Soo Kim, Over-piling effects in printing of a multi-units gravure-offset press (MUGOP), International Conference on Flexible and Printed Electronics 2010, Hsinchu, Taiwan, December 3-4, 2010.

  • Dong Soo Kim, A Manufacturing of organic solar cell using ESD thin film coating method, ISLCT 2010 (Int'l Symposium on Low Carbon & Renewable Energy Technology), Lotte Hotel, Jeju, Republic of Korea, November 15-18, 2010.

  • Dong Soo Kim, Roll-to-roll printing processes & equipments for PEMS, IEEE NANO 2010-Joint Symposium with NANO KOREA 2010, Kintext, Seoul, Korea, August 17-20, 2010.

  • Dong Soo Kim, Visualization of non-newtonian ink transfer for gravure offset printing process, The 14th International Symposium on Flow Visualization, Daegu, Korea, June 21–24, 2010.

  • Dong Soo Kim, A Manufacturing of organic solar cell using ESD thin film coating method, LOPE-C 2010 Large-area, Organic and Printed Electronics Convention, Congress Center, Messe Frankfur,t Germany, May 31 June 2, 2010.

  • Dong Soo Kim, Fabrication of high aspect ratio roll-imprinted patterns on flexible substrate, 21th IC-ME&D (21th International Conference on Molecular Electronics and Devices), Vol.12-5, Sunchon National Univeristy, Sunchon, Korea, May 19-20, 2010.

  • Seung Wook Suh, Dong Soo Kim and Byung Ki Park, Influence of surface modification of polyethylene terephthalate (PET) film on ink-jet printing of Pd(II) catalytic ink, 21th IC-ME&D (21th International Conference on Molecular Electronics and Devices), Vol.12-5, Sunchon National Univeristy, Sunchon, Korea, May 19-20, 2010.

  • Seong-Man Yoon, Jeongdai Jo, Jong-Su Yu, Ha-il Yu and Dong-Soo Kim, Fabrication of micro wall with high aspect ratio using iterative screen printing, IEEE ISAM 2009, Suwon, Korea, November 17-20, 2009.

  • Kwangsoo Kim, Chung Hwan Kim, Heon-Yeoung Kim and Dong-Soo Kim, Effects of Blanket Roller Deformation on Printing Qualities in Gravure-Offset Printing Method, ICFPE 2009, Vol.108, Jeju, Korea, November 11-13, 2009.

  • Seong Man Yoon, Jeongdai Jo, Jong-Su Yu, Ha-il Yu and Dong-Soo Kim, Fabrication of micro wall with high aspect ratio using iterative screen printing, ICFPE 2009, Vol.108, Jeju, Korea, November 11-13, 2009.

  • Dong Soo Kim, Fabrication of thin-film layer of CIGS solar cell using printing processes, ICFPE 2009, Vol.108, Jeju, Korea, November 11-13, 2009.

  • Taik-Min Lee, Jae-Ho Noh, Inyoung Kim, Dong-Soo Kim and Sangki Chun, Reliability of gravure offset printing depending on various printing conditions, ICFPE 2009, Vol.108, Jeju, Korea, November 11-13, 2009.

  • Dong Soo Kim, Fabrication of imprinted patterns using thermal roll-imprinting process on flexible substrate, GJ-NST 2009, Mokpo, Korea, November 5-6. 2009.

  • Jong-Su Yu, Jeongdai Jo, Seong-Man Yoon, Hee-Yeoun Kim and Dong-Soo Kim, Fabrication of printed microfluidics channel by using thermal roll-imprinting, The 9th International Meeting on Infomation Display, Vol.P2-73, KINTEX, Ilsan, Seoul, Korea, October 12-16, 2009.

  • Seong-Man Yoon, Jeongdai Jo, Jong-Su Yu, Ha-il Yu and Dong-Soo Kim, Fabrication of micro wall with high aspect ratio using iterative screen printing, The 9th International Meeting on Infomation Display, Vol.P2-77, KINTEX, Ilsan, Seoul, Korea, October 12-16, 2009.

  • Dong Soo Kim, Development of cantilever type roll printing equipments for printed electronics, ICMDT 2009, Sapporo, Japan, July 25-26, 2009.

  • Dong-Soo Kim and Won-Hee Lee, Design and characteristics analysis of the direct drive type pneumatic servo valve, ICMDT 2009, Sapporo, Japan, July 25-26, 2009.

  • Dong Soo Kim, RFID tag antennas by gravure-offset printings, ICMDT 2009, Sapporo, Japan, July 25-26, 2009.

  • Dong Soo Kim, Development of cantilever type roll printing equipments for printed electronics, ICMDT 2009, Sapporo, Japan, July 25-26, 2009.

  • Dong Soo Kim, Development of zero leakage ball valve for LNG, ICMDT 2009, Sapporo, Japan, July 25-26, 2009.

  • Dong Soo Kim, Development of plate to plate gravure offset printing system, ICMDT 2009, Sapporo, Japan, July 25-26, 2009.

  • Dong Soo Kim, Analysis of deformation of blanket roller and its effect on printing quality, ICMDT 2009, Sapporo, Japan, July 25-26, 2009.

  • Taik-Min Lee, Hyun-Cheol Choi, Jae-Ho Noh and Dong-Soo Kim, EL Display printed on curved surface, 2009 IEEE 22nd International Conference on Micro Electro Mechanical Systems, Sorrento, Italy, January 25-29, 2009.

  • Dong Soo Kim, Optical and micro-structural characterization of printed Cu2ZnSnS4 thin films, 2009 MRS Spring Meeting & Exhibit, San Francisco, California, USA, April 13-17, 2009.

  • Dong-Soo KIM and Myoung-Sub KIM, Analysis and design of cryogenic ball valve, 7th JFPS International Symposium on Fluid Power, Vol.P1-26, Toyama International Conference Center, Toyama, Japan, September 15-18, 2008.

  • Jeongdai Jo, Jong-Su Yu, Taik-Min Lee, Dong-Soo Kim and Kwang-Young Kim, Fabrication of Organic Thin-Film Transistors with Roll-Printed Electrodes Using Patterned Polymer Stamp, Molecular Crystals and Liquid Crystals 2009, Vol.514, Ramada Plaza Jeju Hotel, Jeju, Korea, June 26∼27, 2008.

  • Dong Soo Kim, Achieving mass manufacturing with plastic electronics, Plastic Electronics Asia 2008, Seoul Hilton Hotel, Seoul, Korea, June 24-26, 2008.

  • Dong Soo Kim, Sung Woo Bae, Chung Hwan Kim, Young Kil Bang and Byung Oh Choi, Application and performance evaluation for the new material in the industrial SFF system using a SLS process, 3rd Pacific International Conference on Laser Materials Processing, Vol.2008-529, Beijing, People’s Republic of China, April 16–18, 2008.

  • Sung Woo Bae, Dong Soo Kim and Kyung Hyun Choi,Development of New Laser control Algorithm in the SFF system using a SLS process, ICMDT 2007, Sapporo, Japan, July 2-3, 2007.

  • Dong Soo Kim, Sungwoo Bae and Kyung Hyun Choi, Development of Measurement mechanism of laser beam spot size for SFF system, FAIM 2007, Vol.1, Philadelphia, USA, June 18–20, 2007.

  • Jung-su Kim, Min-cheol Lee, Won-hee Lee and Dong-soo Kim, New 3DP process technique of SFF System using a photopolymer resin and a powder, FAIM 2007, Vol.1, Philadelphia, USA, June 18–20, 2007.

  • Dong Soo Kim, Sung Woo Bae and Kyung Hyun Choi, Application and performance evaluation for the DMS system in the SLS process, ISIE 2007, Toronto, Canada, June 17-20, 2007.

  • Dong Soo Kim, Sang Kyu Bae, Shin Huh and Sung ln Hong, An characteristics analysis of the fluidic muscle cylinder, Proceedings of the 7th JFPS International Symposium,Vol.2005-6,Tsukuba, Japan, Novemeber 7-10, 2006.

  • Dong Soo Kim, Development of polyamide-6 powders and its effect on the fabrication by selective laser sintering, 25th International Congress on Laser Materials Processing and Laser Microfabrication, Vol.2018-1860, Scottsdale, Arizona, USA, October 30–November 2, 2006.

  • Dong Soo Kim, Young Jin Ahn, Sung Woo Bae, Byung Oh Choi and Kyung Hyun Choi, A study on the selective dual laser sintering process for the solid freeform fabrication system, 25th International Congress on Laser Materials Processing and Laser Microfabrication, Vol.2018-1860, Scottsdale, Arizona, USA, October 30–November 2, 2006.

  • Kyung-hyun Choi, Jae-won Choi, Hyung-chan Kim, Yang-hoe Doh, Dong-soo Kim and Seok-hee Lee, Study on Path Generation and Control based on Dual Laser in Solid Freefrom Fabrication System, 2006 SICE-ICASE International Joint Conference, Vol.2006, BEXCO, Busan, Korea, October 18-21, 2006

  • Jung-su Kim, Min-cheol Lee, Won-hee Lee and Dong-soo Kim, New 3DP Process Technique of SFF System Using a Photopolymer Resin and a Powder, 2006 SICE-ICASE International Joint Conference, Vol.2006, BEXCO, Busan, Korea, October 18-21, 2006

  • Won Hee Lee, Dong Soo Kim Jung Su Kim, Min Cheol Lee, A study on reduction of processing time and improvement of strength by using photopolymer resin in the 3DP process, ISIE 2006 PROGRAM INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS 2006, p.326-328, Montreal, Canada, July 9-13, 2006.

  • Dong Soo Kim, Sung Woo Bae and Kyung Hyun Choi, Development of industrial SFF system using dual laser and optimal process, FAIM 2006, Vol.23-6, Limerick, Ireland, June 26–28, 2006.

  • Dong Soo Kim, Young Jin Ahn, Chung Hwan Kim, Byung Oh Choi, and Kyung Hyun Choi, Development of 3D SFFsystem using a new selective dual-laser sintering process, 2nd Pacific International Conference on Laser Materials Processing, Vol.2006-213, Melbourne, Australia, April 3–5, 2006.

  • Dong-Soo Kim, Sang-Kyu Bae and Choi, Kyung-Hyun, Characteristic analysis and experimental evaluation of artificial pneumatic cylinder, SPIE International Symposium on Optomechatronic Technologies(ISOT2005), Vol.6084, Sapporo, Japan, December 5-7, 2005.

  • Dong Soo Kim, Won Hee Lee and Beong Oh Choi, Development of direct drive type pneumatic servo valve, Development of direct drive type pneumatic servo valve, Proceedings of the 6th JFPS International Symposium, Vol.2005-6, Tsukuba, Japan, Novemeber 7-10, 2005.

  • Dong Soo Kim, Sang Kyu Bae and Young Cheol Kim, An experiments and characteristics analysis of the sealless cylinder, Proceedings of the 6th JFPS International Symposium, Vol.2005-6, Tsukuba, Japan, Novemeber 7-10, 2005.

  • Dong Soo Kim, Sang Woon Park, Hyun Sub Kim and Jae Sub Yoo, Computation analysis and optimal design of a high speed response and low power micro valve, Proceedings of the 6th JFPS International Symposium, Vol.2005-6, Tsukuba, Japan, Novemeber 7-10, 2005.

  • Dong Soo Kim, Young Jin An and Kyung Hyun Choi, Development and performance evaluation of industrial 3D real object duplication system by selective dual-laser sintering process, ICALEO 2005, Vol.2005-602, Miami, Florida, USA, October 31- November 3, 2005.

  • Dong Soo Kim, Electrospray deposition as a technique for the high speed and large area production of protein microarrays for cell culture, NANO 2005 (Nanoengineering Symposium 2005, Banff, Alta, Canada, July 24-27, 2005.

  • Dong Soo Kim, A study on the SMLS process as a industrial type solid freeform fabrication system, FAIM 2005, Bilbao, Spain, July 18–20, 2005.

  • Dong Soo Kim, A study on the manufacturing of industrial type SFF system by CO2 laser, Third International WLT-Conference on Lasers in Manufacturing, Vol.2005, Munich, Germany, June 13-16, 2005.

  • Dong-Soo Kim, Young-Jin An, Sung-Jon Kim, Byung-Oh Choi, Hyun-Eui Lim, A study on the core technologies for industrial SFF system, ICCAS 2005, p.2170-2174, KINTEX, Gyeong Gi, Korea, June 2-5, 2005.

  • DongSoo Kim and SungJong Kim, Development of industrial 3D real object duplication system by selective multi-laser sintering process, ICALEO2004, Vol.2004-M706, San Francisco, California, USA, October 04-07, 2004.

  • Dong Soo Kim, A study of 3D RODs for industrial and office type using MSLA and MMJ processes, IMS International Forum 2004, Cernobbio, Italy, May 17-19, 2004.

  • Dong Soo Kim, Design and performance evaluation of the uni-wire unit for pneumatic system, icmit 2003, Cheong Pung Resort Hotel, Jecheon, Korea, December 4-6, 2003.

  • Dong Soo Kim, Development of the serial data transmission system for pneumatic valve system control, ICCAS2003, Vol.1, TEMP Hotel, Gyeongju, Korea, October 22-25, 2003.

  • Dong Soo Kim, Development of pneumatic servo valve, ICCAS2003, Vol.1, TEMP Hotel, Gyeongju, Korea, October 22-25, 2003.

  • Dong Soo Kim, Development of serial data system for air pressure valve system control, ICCAS2003, Vol.1, TEMP Hotel, Gyeongju, Korea, October 22-25, 2003.

  • Dong Soo Kim, Development of pneumatic rotary actuator for ship winch, ISCEM 2003, Vol.1, BEXCO, Busan, Korea, October 22-24, 2003.

  • Dong Soo Kim, Design and experiment of direct-acting pressure servo valves, Bath Workshop ptmc2003, Vol.1, University of Bath, Bath, England, September 10-12, 2003.

  • Dong-Soo Kim, Sang-Kyu Bae and Sung-In Hong, A characteristic analysis of the fluidic muscle cylinder, ICMIT 2005, Vol.6042, Chongqing, China, September 20-23, 2003.

  • Dong Soo Kim, Design and interpretation of direct-acting pressure servo valves, 7th. Int. Sym. fluid control measurement and visualization, Vol.1, Sorrento, Italy, August 25-28, 2003.

  • Dong Soo Kim, Design and analysis of the direct drive type pneumatic servo valve, Seventh Triennial International Symposium on Fluid Control, Measurement and Visualization, Vol.32, Sorrento, Italy, July 21-24, 2003.

  • Dong Soo Kim, Modeling and simulation of bearing systems for sealless pneumatic cylinders, ICCMFPT, Vol.1, San Diego, California, USA, July 14-18, 2003.

  • Dong Soo Kim, Won Hee Lee and Kwang Young Kim, An Experimental study on the cushioning characteristics of pneumatic cylinder system, Proceedings of the 5th JFPS International Symposium on Fluid Power, Nara 2002, Vol.2002-5-2, Tokyo, Japan, November 12-15, 2002.

  • Dong Soo Kim, Jeong Dai Jo and Byung Oh Choi, A Study on the design and performance evalution of pneumatic fieldbus system, Proceedings of the 5th JFPS International Symposium on Fluid Power, Nara 2003, Vol.2002-5-2, Tokyo, Japan, November 12-15, 2002.

  • Dong Soo Kim, Design and dynamic characteristics analysis of the direct drive type pneumatic servo valve, 2002 International Conference on Control, Automation and Systems (ICCAS 2002), Muju Resort, Jeonbuk, Korea, October 16-19, 2002.

  • Chun Pyo Hong and Dong Soo Kim, Design of A Data Transmission System for Pneumatic System Control, ICCAS2001, Cheju National Univ. Jeju, Korea, October 17-21, 2001.

  • Dong Soo Kim, Characteristics analysis on the pneumatic cushion cylindersTokyo'99 Fourth JHPS International Symposium on Fluid Power, Tokyo, Japan, November 15-17, 1999.

  • Dong Soo Kim, The analysis and optimum design of cushioning pneumatic cylinder, Harbin ISFP'99, Harbin, China, September 7-9, 1999.