Particle Technology and Fluid Operation Lab

NTU Chemical Engineering | CGU Center for Green Technology Research

2022

C.C. Lai, A.N. Huang, C.Y. Chen, W.Y. Hsu, J.P.K. Seville, H.P. Kuo*, 2022, “Modification of the spherical particle spring-damping contact model from contact velocity dependent restitution coefficients”, Powder Technology, 401, pp. 117294.

2021

A.N. Huang, X. Wang, W.Y. Hsu and H.P. Kuo*, 2021, “Particle segregation in a rotating drum with inner segmentation ring pair”, Powder Technology, 394, pp. 891–900.


K. Furumoto, T. Narita, T. Fukasawa, T. Ishigami, H.P. Kuo, A.N. Huang and K. Fukui*, 2021, “Influence of pulse-jet cleaning interval on performance of compact dust collector with pleated filter”, Separation and Purification Technology, 279, 119688.


A.N. Huang, T.H. Cheng, W.Y. Hsu, C.C. Huang and H.P. Kuo*, 2021, “DEM study of particle segregation in a rotating drum with internal diameter variations”, Powder Technology, 378(A) , pp. 430–440.


2020

A.N. Huang, H.H. Cheng, W.Y. Hsu, C.C. Huang and H.P. Kuo*, 2020, “Transition from binder to matrix-forming: the effect of hydroxypropylmethylcellulose concentration on the properties of starch/hydroxypropylmethylcellulose granules prepared in a high shear granulator”, Journal of the Taiwan Institute of Chemical Engineers, 113, pp. 46–55.


A.N. Huang, T.H. Cheng and H.P. Kuo*, 2020, “A study of the axial and radial competition segregation in a rotating drum with internal diameter changing”, AIChE Journal, 66(5):e16921.


W.Y. Hsu, A.N. Huang*, and H.P. Kuo*, 2020, “Approach the powder contact force, voidage, tensile stress, wall frictional stress and state diagram of powder bed by simple pressure drop monitoring”, Advanced Powder Technology, 31(1), pp. 433–438.


2019

C.Y. Lin, H.C. Wang, W.Y. Hsu, A.N. Huang* and H.P. Kuo*, 2019, “Stage-wise characterization of the high shear granulation process by impeller torque changing rate”, Advanced Powder Technology, 30(8), pp. 1513–1521.


H.P. Kuo*, Y.N. Yang and A.N. Huang, 2019, “A kinetic study of CFB boiler separated bottom ashes during the steam hydration reaction”, Journal of the Taiwan Institute of Chemical Engineers, 94, pp. 124–128.


2018

A.N. Huang and H.P. Kuo*, 2018, “CFD simulation of particle segregation in a rotating drum. Part II: Effects of specularity coefficient”, Advanced Powder Technology, 29(12), pp. 3368–3374.


A.N. Huang, K. Ito, T. Fukasawa, K. Fukui*and H.P. Kuo*, 2018, “Effects of particle mass loading on the hydrodynamics and separation efficiency of a cyclone separator”, Journal of the Taiwan Institute of Chemical Engineers, 90, pp. 61–67.


T. Fukasawa, H. Toda, S.Y. Huang, R. Hiraiwa, A.N. Huang, H.P. Kuo, and K. Fukui*, 2018, “Component separation in a vibrating fluidized bed based on differences in agglomeration properties of particles”, Journal of Chemical Engineering of Japan, 51, pp. 576–583.


W.Y. Hsu, A.N. Huang and H.P. Kuo*, 2018, “Analysis of interparticle forces and particle-wall interactions by powder bed pressure drops at incipient fluidization”, Powder Technology, 325, pp. 64–68.


A.N. Huang, C.P. Hsu, B.R. Hou and H.P. Kuo*, 2018, “Production and separation of rice husk pyrolysis bio-oils from a fractional distillation column connected fluidized bed reactor”, Powder Technology, 323, pp. 588–593.


A.N. Huang, K. Ito, T. Fukasawa, H. Yoshida, H.P. Kuo and K. Fukui*, 2018, “Classification performance analysis of a novel cyclone with a slit on the conical part by CFD simulation”, Separation and Purification Technology, 190, pp. 25–32.


2017

A.N. Huang, N. Maeda, S. Sunada, T. Fukasawa, H. Yoshida, H.P. Kuo and K. Fukui*, 2017, “Effect of cold air stream injection on cyclone performance at high temperature”, Separation and Purification Technology, 183, pp. 293–303.


A.N. Huang and H.P. Kuo*, 2017, “CFD simulation of particle segregation in a rotating drum. Part I: Eulerian solid phase kinetic viscosity”, Advanced Powder Technology, 28(9), pp. 2094–2101.


H.P. Kuo*, B.R. Hou and A.N. Huang, 2017, “The influences of the gas fluidization velocity on the properties of bio-oils from fluidized bed pyrolyzer with in-line distillation”, Applied Energy, 194, pp. 279–286.


A.N. Huang, N. Maeda, D. Shibata, T. Fukasawa, H. Yoshida, H.P. Kuo and K. Fukui*, 2017, “Influence of a laminarizer at the inlet on the classification performance of a cyclone separator”, Separation and Purification Technology, 174, pp. 408–416.


H.P. Kuo*, S.W. Yao, A.N. Huang and W.Y. Hsu, 2017, “Photocatalytic degradation of toluene in a staged fluidized bed reactor using TiO2/silica gel”, Korean Journal of Chemical Engineering, 34(1), pp. 73–80.


2016

H.P. Kuo*, H.A. Tsai, A.N. Huang and W.C. Pan, 2016, “CIGS absorber preparation by non-vacuum powder-based screen printing and far infrared RTA densification”, Applied Energy, 164, pp. 1003–1011.


H.P. Kuo*, W.T. Tseng and A.N. Huang, 2016, “Controlling of segregation in rotating drums by independent end wall rotations”, KONA Powder and Particle Journal, 33, pp. 239–248.


2015

郭修伯、黃安婗,2015,“你是風兒我是沙─流體化床”,科學發展月刊,513 期,9月號,pp. 10–15。


郭修伯,2015,“化腐朽為神奇-以長庚大學與台塑石化公司副產石灰產學合作案為例”,台塑企業雜誌46卷(第4期)7月號,pp. 300–306。


C.Y. Li, S. Appari, L.X. Zhang, A.N. Huang, H.P. Kuo, S. Kudo, J.I. Hayashi, K. Norinaga*, 2015, “Modeling of gas/particle flow in coal conversion with a drop tube reactor using a lumped kinetic model accounting volatiles char interaction”, Fuel Processing Technology, 138, pp. 588–594.


C.Y. Cheng, A.N. Huang and H.P. Kuo*, 2015, “Preparation of the diffuser films using a 1700 mm wide reverse mode gravure coating system”, Journal of Chemical Engineering of Japan, 48(4), pp. 300–306.


C.P. Hsu, A.N. Huang and H.P. Kuo*, 2015, “Analysis of the Rice Husk Pyrolysis Products from a Fluidized Bed Reactor”, Procedia Engineering, 102, pp. 1183 –1186.

W.Y. Chen and H.P. Kuo*, 2015, “Surface coating of Group B iron powders in a spouted bed”, Procedia Engineering, 102, pp. 1144 – 1149.


S.W. Yao and H.P. Kuo*, 2015, “Photocatalytic degradation of toluene on SiO2/TiO2 photocatalyst in a fluidized bed reactor”, Procedia Engineering, 102, pp. 1254 – 1260.


2014

A.N. Huang, W.C. Pien and H.P. Kuo*, 2014, “Preparation of the working electrode of dye-sensitized solar cells using screen printing with alkyd resins”, Energy Procedia, 61, pp. 1528 – 1531.


A.N. Huang, H.A. Tsai, H.P. Kuo* and W.C. Pan, 2014, “Non-vacuum method for formation of CuIn0.7Ga0.3Se2 absorber thin film using screen printing and far infrared rapid thermal annealing”, Energy Procedia, 61, pp. 88 – 91.


H.P. Kuo*, C.F. Yang, A.N. Huang, C.T. Wu and W.C Pan, 2014, “Preparation of the working electrode of dye-sensitized solar cells: effects of screen printing parameters”, Journal of the Taiwan Institute of Chemical Engineers, 45(5), pp. 2340-2345.


B.Y. Wang, C.Y. Kevin Tseng, C.M. Shih, Y.L. Pai, H.P. Kuo, S.J. Jessie Lue, 2014, “Polytetrafluoroethylene (PTFE)/silane cross-linked sulfonated poly(styrene–ethylene/butylene–styrene) (sSEBS) composite membrane for direct alcohol and formic acid fuel cells”, Journal of Membrane Science, 464, pp. 43-54.


H.P. Kuo*, H.Y. Tseng, A.N. Huang and R.C. Hsu, 2014, “A study of the ash production behavior of spent limestone powders in CFBC”, Advanced Powder Technology, 25, pp. 472-475.


A.N. Huang and H.P. Kuo*, 2014, “Developments in the tools for the investigation of mixing in particulate systems - A review”, Advanced Powder Technology, 25, pp. 163-173.


H.P. Kuo* and C.T. Wu, 2014, “Speed up dye-sensitized solar cell fabrication by rapid dye solution droplets bombardment”, Solar Energy Materials and Solar Cells, 120(A), pp. 81-86.


2013

C.Y. Cheng, Y.N. Yang, A.N. Huang and H.P. Kuo*, 2013, “Steam hydration of CFBC bottom ashes in a rotary kiln”, Journal of the Taiwan Institute of Chemical Engineers, 44(6), pp. 1060-1066.


H. Yang, S. Kudo, H.P. Kuo, K. Norinaga, A. Mori, O. Masek, J. Hayashi*, 2013, “Estimation of enthalpy of bio-oil vapor and heat required for pyrolysis of biomass”, Energy & Fuels, 27(5), pp. 2675-2686.


A.N. Huang, L.C. Liu, and H.P. Kuo*, 2013, “The role of end wall shearing in the drum segregation band formation”, Powder Technology, 239, pp. 98-104


A.N. Huang, W.C. Kao and H.P. Kuo*, 2013, “Numerical studies of particle segregation in a rotating drum based on Eulerian continuum approach”, Advanced Powder Technology, 24(1), pp. 364–372.


2012

S.C. Lin, H.Y. Liu, S.W. Lin, M. Yao, U.I. Wu, H.P. Kuo and C.H. Kuo*, 2012, “Simultaneous determination of triazole antifungal drugs in human plasma by sweeping-micellar electrokinetic chromatography”, Analytical and Bioanalytical Chemistry, 404(1), pp. 217-228.


C.T. Wu, H.P. Kuo*, H.A. Tsai and W.C. Pan, 2012, “Rapid dye-sensitized solar cell working electrode preparation using far infrared rapid thermal annealing”, Applied Energy, 100, pp. 138-143.


A.N. Huang and H.P. Kuo*, 2012, “A study of the three-dimensional particle size segregation structure in a rotating drum”, AIChE Journal, 58(4), pp. 1076-1083.


2011

A.N. Huang and H.P. Kuo*, 2011, “A study on the transition between neighbouring drum segregated bands and its application to functionally graded material production”, Powder Technology, 212(2), pp. 348-353.


H.P. Kuo, S.M. Pan, and H.T. Hsu, 2011, “Comparisons of the hydrogen-rich syngas compositions from wet rice husk slurry steam reforming reactions using different catalysts”, Biomass & Bioenegy, 35(7), pp. 3025-3031.


H.P. Kuo, C.T. Wu and R.C. Hsu, 2011, “Continuous toluene vapour photocatalytic deduction in a multi-stage fluidised bed”, Powder Technology, 210(3), pp. 225-229.


2010

H.P. Kuo and C.H. Cheng, 2010, “The comparison of the elastic properties of the particle assembly in a vibrator determined by the top cap method, the apparent mass method and the energy dissipation method”, Journal of Taiwan Institute of Chemical Engineers, 41(2), pp. 239-243.