Things to Look Out for Well Maintenance Checklist

Spring will arrive soon, unless there is a sudden deep freeze.This indicates that the annual inspection and upkeep of your water well is at an ideal time.

One obvious reason why maintaining your health properly is important is this:For the health of you and your family, clean water is essential.You run the risk of contamination having an effect on your health or a system failure in the future if preventative maintenance and an annual inspection are not performed.

Floods, storms, and freezes during the winter can affect your water supply.Composts, oils, paints, and pesticides can likewise make your very much become polluted.

Disease and other health problems can be brought on by contamination.You should immediately make an online request for water well service if you notice any changes in taste, color, or smell.

1) Tests of Flow

We are examining the system's output for Well Maintenance checks.

2) Verify the water level.3) Conduct a contact check on the pressure tank and pressure switch—if at all possible—before and during pumping.

4) Function of the pump motor.Grounding, line voltage, and amp load.

5) Test for coliform bacteria.

6) Test with nitrate

7) Manganese, iron, water hardness, sulfides, and other thingscan be examined to see if there is evidence of a problem.

8) Inspection of the well cover and well cap to ensure that they are securely fastened.

Lubricating elastomer seals with oil, petroleum jelly, or other petroleum- or silicon-based products is discouraged by many pump manufacturers.The elastomer may swell and cause the seal to fail if these products are used.P-80 rubber lubricants are only for a short time; once dry, they stop lubricating the parts and keep them in place.Additionally, these lubricants will not dry out rubber components and will not reactivate in the presence of water.

Regularly inspect your well cover.Check to see that it is elevated by at least one foot.If the well cover has developed holes through which chemicals, dirt, and other contaminants can seep in, check its condition and replace it.The well ought to be completely covered by the well cover.Replace the cover right away if it doesn't fit right.

It is not uncommon for waste from nearby drainage systems to enter wells for Submersible pump.Maintain proper separation between your well, any nearby drainage systems, and chemical storage facilities, if any, to prevent health problems.When landscaping your well, keep the highest part at least 16 inches above the ground to ensure proper drainage.Maintain a clean environment by regularly removing snow and shrubbery.