Netgear Orbi satellites repeats the Orbi router signals and works exact like extender or repeater. But, if you are facing multiple problems like Orbi satellite not connecting or not working, you should reset it, and resolve the problem quickly. Here in this article, we will walk you through a guide which teach you how to reset Orbi satellite easily in minutes.
Why Reset Your Orbi Satellite?
There are a few common reasons you might want to reset your Orbi satellite:
It's not syncing with your Orbi router
You’re experiencing slow speeds or weak signals
You’re setting it up in a new location
You want to start from scratch due to troubleshooting
You’re selling or giving it away and want to erase personal settings
Whatever your reason, a reset often clears out the junk and helps you start fresh.
Quick Warning: Know the Two Types of Resets
There are two kinds of resets for your Orbi satellite:
Soft Reset – This just reboots the satellite without erasing your settings. It’s more like a refresh. You can do this type of reset process by just cut the power and supply it again.
Factory Reset (Hard Reset) – This erases all the saved settings and puts the satellite back to how it was straight out of the box. But you have to configure it again from your Orbi app on your phone.
In this guide, we’re doing a full factory reset because if you want to truly fix issues or set it up from scratch, this is what you need.
This’ll be quick, but here’s what you need before starting:
Your Orbi satellite
A paperclip or something similar
That’s it. If you can press a button, you can reset this thing.
How to Easily Reset Your Orbi Satellite?
Step 1: Power On Orbi Satellite
Make sure the satellite is plugged in and turned on. Give it about a minute or so to fully power up.
You’ll know it’s ready when the LED ring is lit colors may vary depending on the model, but typically you’ll see white, blue, or magenta lights during normal operations.
Flip the satellite over or check the back panel. You’re looking for a pinhole labeled “Reset.”
You’re not pressing this with your finger. This is where your paperclip (or SIM ejector tool, or even a toothpick) comes in.
To press use a paperclip and press into the reset hole button. Hold it for about 10–15 seconds. The LED ring on the Orbi satellite while doing this. After holding the button, you’ll notice the light either blinks amber/orange or just turns off momentarily. That’s your signal it’s resetting.
The Orbi satellite will go through its reboot process. This can take a couple of minutes. During this time, the LED ring will do its thing flashing various colors and then eventually settling down. Once it's back on and not showing any wild blinking colors, it’s fully reset and ready to sync again.
What Happens After the Reset?
Once the reset is done, the Orbi satellite is back to factory settings. It no longer remembers any previous connections or custom settings.
To reconnect it to your Orbi router:
Place the satellite near your router
Power it on
Open the Orbi app or to your Orbi router login admin page (usually by visiting orbilogin.com)
Follow the on-screen steps to add a satellite
The syncing process should be smooth just give it a couple of minutes.
Still Not Working? Here’s What to Try
Sometimes things don’t go as planned. If the reset didn’t help, here are a few quick troubleshooting tips:
Move the satellite closer to the router during setup
Check the firmware—make sure your router and satellite are updated
Reboot your entire Orbi system (router first, then satellite)
Try a second reset if it didn’t catch the first time
The Conclusion
Resetting an Orbi satellite is easy but also a risky troubleshooting for issues. Because reset process will delete all data from the device. We have provided all instructions to reset Orbi satellite, also we have added a few tips to avoid reset procedure.