Technologies used for cleaning Air Ducts in Mississauga
Technologies used for cleaning Air Ducts in Mississauga
Air Duct Cleaning Services in Mississauga is essential to ensure the proper functioning of the installation and to maintain the good indoor air quality in the premises. Fouling of the air network can cause repeated malfunctions, a significant reduction in performance or high power consumption. In response to the growing interest in environmental and energy issues, industrialists compete for ingenuity to simplify, improve and make reliable the cleaning techniques of air ducts. The sector is evolving, becoming more and more technical and exciting. We propose in this article, a small inventory of the methods used for the cleaning of the air networks.
· Cleaning the air ducts by brushing
Air Duct Cleaning Services in Mississauga is very close to traditional chimney sweeping, aspiro-brushing air ducts is the simplest method to implement and the most practiced. For this, the conduit is isolated from the rest of the network and put under vacuum using a suction box. Then, the technician introduces into the sheath a rotating brush. The dust removed from the walls is sucked at the end of the duct by the suction box.
The big advantage of this method is the small size of the equipment. The technician can work in tight spaces and easily transport the equipment to hard-to-reach areas (ladder, stairs, etc.). The aspiro-brushing offers good quality for Air Duct Cleaning Services in Mississauga. However, for proper cleaning, the technician must manually clean the large diameter ducts and elbows. Also, note that this method is less effective for cleaning angles on rectangular ducts.
· Cleaning the air ducts with compressed air
The compressed air method is quite similar to the brushing method. The rotating brush is replaced by a nozzle that projects air under pressure. Compressed air nozzles are often equipped with flagella to project air in all directions.
This method is faster than brushing and offers greater efficiency for cleaning the corners of a rectangular duct. As for brushing, it will be necessary to intervene manually on large diameter ducts.
· Cleaning the air ducts with a robot
The cleaning robots are equipped with a brush or an air nozzle. They are also equipped with a camera to control the quality of cleaning.
This technology has been a small revolution in the cleaning of air ducts: significantly improved safety conditions, better cleaning quality, and faster interventions. Unfortunately, in the field, the implementation is more complicated than expected. The cleaning robots are generally very bulky and do not allow cleaning the small diameters of the sheath. Large diameter sheaths are always cleaned manually as well as most elbows. On the other hand, it is not possible to clean the vertical ducts. Finally, on a network of conventional ducts, the possibility of using a cleaning robot is relatively rare.