How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-30 · 7 min read · Independent comparison
• OneOdio A71 — biggest strength: a full over-ear headphone plus a detachable noise-canceling boom mic in one bundle, with 50mm dynamic drivers covering 20Hz–20,000Hz and dual 3.5mm AUX cables for consoles, PC and mobile.
• OneOdio A71 — biggest trade-off: it's a wired-only headphone with push-button controls and no active noise cancellation, so it isn't a wireless or travel-first pick.
• Arzweyk Replacement Audio Cable — biggest strength: an extendable spring coiled cord that stretches roughly 4.1 ft to 7.87 ft, with an OFC copper core, double shielding and gold-plated connectors for cleaner signal runs.
• Arzweyk Replacement Audio Cable — biggest trade-off: it is only a cable. If you don't already own a compatible Pioneer HDJ-series headphone, this solves nothing for you.
• Who each pick is for: OneOdio A71 for someone building a DJ/studio/gaming setup from zero who also wants voice capture; Arzweyk for a Pioneer HDJ-X5, X7, S7, CUE1 or Cx owner whose stock cable is worn, tangled or too short.
The A71 is a wired over-ear headphone built around 50mm dynamic drivers with a 20Hz–20,000Hz frequency range. That's the full audible band, and OneOdio tunes it with an emphasis on deep bass and crisp highs — the profile most people actually want when they're cueing tracks, watching a mix come together, or just listening for pleasure. The enclosure mixes synthetic leather, fabric, plastic and metal, and the memory-protein ear cushions plus adjustable headband are specified for extended sessions, which matters more than it sounds like it should when you're three hours into a set or a recording session.
What makes this bundle unusual is the included detachable boom microphone with noise-canceling technology. You get studio-oriented voice pickup for Zoom calls, podcasting and party chat without buying a separate mic or a separate headset. Pop the boom off and it converts into a plain pair of everyday over-ear headphones. Connectivity is handled by the included dual 3.5mm AUX cables, so it works with PC, PS4/PS5, Mac, Switch and mobile devices; Xbox is listed as possibly needing an adapter, so check your controller before assuming it's a straight plug-in.
Arzweyk Replacement Audio Cable: Who It's For
This is a purpose-built spare part, and it's honest about that. The Arzweyk cable is designed to fit Pioneer DJ HDJ-X5, HDJ-X7, HDJ-S7, HDJ-CUE1 and HDJ-Cx professional headphones, terminating in the connector arrangement those models use, with a 3.5mm plug and a 6.35mm adapter so you can go from a phone or console to a mixer or audio console without hunting for an adapter. It's a male-to-male AUX cable with two pins.
The build is where the thought went in. The core is high-purity OFC oxygen-free copper, wrapped in aluminum foil braided double shielding, with 24K gold-plated interfaces. Practically, that means less interference and a cleaner, more consistent signal path than a generic thin cable — exactly what you want when you're monitoring a mix and don't want to second-guess what you're hearing. The coiled spring structure stretches from about 4.1 ft to 7.87 ft and rebounds on its own, which is the classic DJ-booth solution: long enough to reach across a mixer, short enough that it doesn't pool on the floor and snag. Arzweyk rates the TPE jacket through a 10,000-bend test and describes it as wear-resistant, tear-resistant and anti-tangle.
Buy it if you own one of those Pioneer HDJ models and your original cable has gone crackly, twisted itself into knots, or is simply too short for your booth layout — or if you want a backup cable in your gig bag, since these are the parts that fail first and at the worst possible time. Skip it if your headphone isn't on the compatibility list, or if you were hoping for a full headphone: this is one cable and one 6.35mm adapter, nothing more.
Side-by-Side: Which Should You Choose?
• You need sound and a microphone in one purchase → OneOdio A71. The boom mic is the whole point of the bundle.
• Best for DJ booth cable management → Arzweyk. The self-rebounding spring coil stretches 4.1–7.87 ft and retracts instead of tangling.
• Best for long listening sessions → OneOdio A71. Memory-protein cushions and an adjustable headband are specified for extended wear; a cable has no comfort spec at all.
• Best for cross-platform gaming and calls → OneOdio A71. Dual 3.5mm AUX cables cover PC, PS4/PS5, Mac, Switch and mobile, with an adapter caveat for Xbox.
• Best for signal integrity on a studio run → Arzweyk. OFC copper, double shielding and gold-plated connectors are the anti-interference recipe.
• Best "buy it once and forget it" purchase → depends on your gap. If you have no headphone, buy the A71. If you have a headphone and no reliable cable, buy the Arzweyk.
• Best value for a beginner building a first setup → OneOdio A71. One box covers headphones, cabling and voice capture.
If I had to pick one, I'd buy the OneOdio A71 — but only because it does more jobs. In my opinion it's the stronger first purchase for anyone starting a DJ/studio corner from scratch, since the headphone, the dual AUX cables and the detachable boom mic all arrive together and the 50mm drivers cover the full 20Hz–20,000Hz range you'd want for monitoring. The Arzweyk cable is the smarter buy for a narrower, very real problem: you already own a Pioneer HDJ headphone and the cable is the weak link. Buy the A71 to build a setup; buy the Arzweyk to keep one alive.
can you dj with studio headphones
Yes. Studio-style over-ear headphones like the OneOdio A71, with 50mm drivers and a 20Hz–20,000Hz range, are commonly used for cueing and monitoring. The practical requirement is a wired connection and enough isolation to hear the next track over the room, which over-ear circumaural cushions provide.
do you need headphones to dj
You need a way to preview the next track without the crowd hearing it, and headphones are the standard tool for that. A wired over-ear pair plugged into your mixer or controller's cue output is the conventional setup, which is why cable quality matters — a failing cable is the most common weak point in that chain.
why do djs need headphones
DJs use headphones to cue tracks, beatmatch by ear and check a mix before it hits the main output. That means the headphone and its cable sit in constant motion — which is exactly why a coiled, self-rebounding cable like the Arzweyk, rated through a 10,000-bend test, is built for booth conditions rather than desk use.
is a replacement cable worth it for dj headphones
If your Pioneer HDJ-X5, X7, S7, CUE1 or Cx cable has gone intermittent or tangled, a replacement with OFC copper, double shielding and gold-plated connectors restores a clean signal for far less than a new headphone. Keep one as a spare — cables fail at gigs, not at home.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: KOPIDOE Bone Conduction Swimming vs sucegi E12, CozyPhones Over-Ear vs Yworlln NE76: Wireless Travel, acer OHR702 vs Zollexa Kids: Kids Headphones, Orzly Gaming Headset vs Kosker Headset Stand 4