How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a headset you can actually switch between devices and keep talking on, choose Orzly Gaming Headset; if you need a way to switch headphones, controllers and phones around on your desk without the clutter spreading, choose Kosker Headset Stand 4. That's the whole comparison in one line: one is a wired gaming headset, the other is a storage and rotation stand. They overlap only at the word "headset."
• Orzly Gaming Headset — biggest strength: a real 3.5 mm wired headset with 50 mm dynamic drivers, a foldable mic, and inline volume control on the cable. It's the thing you wear and listen to.
• Orzly Gaming Headset — biggest trade-off: wired only, no Bluetooth, no active noise cancellation, and it depends on whatever you plug the 3.5 mm jack into.
• Kosker Headset Stand 4 — biggest strength: a four-tier vertical organizer with a heavy-duty metal base and 360° rotation, so you can swing the tier you want toward you instead of digging through a pile.
• Kosker Headset Stand 4 — biggest trade-off: it produces no audio at all. It holds gear; it doesn't play it. It also takes up a fixed footprint on your desk even though it saves space overall.
• Pick Orzly Gaming Headset if you need the actual sound and mic for gaming, calls or handheld play.
• Pick Kosker Headset Stand 4 if you already own working headphones and controllers and your problem is the mess, not the audio.
This is a wired, over-ear gaming headset built around a 3.5 mm jack. That single spec tells you most of what you need to know. Whatever has a standard headphone port — a handheld in TV mode, a laptop, a controller with a jack, a desktop front panel — is a device it can plug into. The audio side runs on 50 mm dynamic drivers with a frequency range of 20 Hz to 20,000 Hz, which is the full audible band, and Orzly describes the tuning as stereo sound with deep bass and crisp highs. In my opinion that's the right target for games: you want footsteps and explosions to sit at different ends of the spectrum.
Who should buy it: someone who wants one wired headset that moves between a console, a handheld and a PC, and who doesn't want to think about charging anything. The color options match handheld Joycon styling, so if you care about your setup looking of a piece, that matters.
Who should skip it: anyone who needs wireless freedom, anyone who needs active noise cancellation (the data sheet lists noise control as none, so this is passive isolation only), and anyone who wants a mic boom on the ear cup rather than on the cable. If you're the person who constantly yanks the cable out walking away from the desk, this design will annoy you.
Kosker Headset Stand 4: Who It's For
The Kosker is a different category of object entirely, and it's worth being blunt about that: it makes no sound. What it does is organize. Four tiers, arranged vertically, with a heavy-duty metal base and a triangular structure that Kosker says is built to hold even bulky gaming headphones. The whole thing rotates 360°, so instead of reaching over a row of controllers you spin the tier you want to the front.
The footprint is 8.39 inches wide by 8.39 inches deep by 17.41 inches tall — so it's a tall, narrow tower rather than a sprawling tray. That's the trade-off in physical terms: it occupies a fixed square on your desk, but it consolidates up to twelve controllers plus headphones and a phone, depending on how you load it, into a footprint smaller than the mess would be if it were spread out. Assembly is tool-light and manual-guided, and Kosker frames it as a few minutes of work. The unit weighs 2.2 pounds, most of which is that base.
Who should buy it: anyone with more than one controller in rotation, a headset that currently lives on a chair arm, and a phone that ends up face-down on the mousepad. It's also a sensible gift for a gamer whose desk is the weak point in an otherwise good setup, and Kosker leans into that framing directly.
Side-by-Side: Which Should You Choose?
• Best for actual audio → Orzly Gaming Headset. 50 mm dynamic drivers, 20 Hz–20,000 Hz, stereo tuning. The Kosker produces no sound.
• Best for a microphone → Orzly Gaming Headset. Foldable mic plus inline volume control on the 3.5 mm cable.
• Best for desk organization → Kosker Headset Stand 4. Four tiers, 360° rotation, twelve-controller capacity, phone support.
• Best for switching between devices → Orzly Gaming Headset, with a caveat. A 3.5 mm jack is the simplest "switch" there is: unplug from one thing, plug into the next. No pairing menus, no battery, no dropouts. But it's a physical switch, and you're limited to devices with a headphone port.
• Best for switching headphones themselves → Kosker Headset Stand 4. If your actual habit is rotating between two or three headsets, having them parked on rotating tiers makes that swap a two-second motion instead of a hunt.
• Best for a cramped but messy desk → Kosker Headset Stand 4. The vertical design is the whole point; it trades floor area for height.
• Best for handheld-console players → Orzly Gaming Headset. The color-matched design and wired simplicity suit a handheld docked to a TV.
• Best if you want both problems solved → buy both. A wired headset for the audio, a stand for the storage. They don't compete; they stack.
If I could only take one, I'd take the Orzly Gaming Headset, because it does the thing a headset is for — it makes sound and takes your voice — and the 3.5 mm jack makes device switching about as painless as it gets. The Kosker solves a real problem, but it's a problem you only have after you already own decent gear. My honest recommendation: if you're short on audio, buy the Orzly first. If your audio is sorted and your desk looks like a controller yard sale, the Kosker is the smarter purchase, and it's the one I'd gift. Check the current price on Amazon before you commit either way — value here depends entirely on what you're paying on the day.
FAQ
how to switch headphones between devices
how to switch headphones to headset windows 11
Windows treats a 3.5 mm headset as an audio device, so you select it under the sound output settings and it becomes your default. Note that the Orzly has no USB connection or software, so Windows sees it purely as analog audio in and out through the jack — there's nothing to install.
how to switch headphones to speakers on computer
Switch the output in your computer's sound settings from the headset to the speakers, or simply unplug the 3.5 mm jack, which usually hands output back to the default device automatically. If your speakers and headset share a single port, you'll need to swap the plug physically.
how to switch headphones left right
For a stereo headset like the Orzly, left and right are fixed by the ear cups and the wiring — there's no swap function. If channels sound reversed, the fix is at the source: check your device's audio balance settings rather than the headset itself.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: JINSERTA Gaming Headset vs Tascaquin Headphone Stand, Picun NC60 vs Gvyugke Gaming Headset: Foldable Headphones, BINNUNE Headset vs Vakedy Gaming Headset: Wired Gaming