Embedded Files
Remember to follow the 3D Printing Guidelines and the Bambu Labs Guidelines when printing on the Bambu Labs 3D Printers.
Remember to follow the 3D Printing Guidelines and the Bambu Labs Guidelines when printing on the Bambu Labs 3D Printers.
Some important notes on the use of Bambu Labs 3D Printers:
Some important notes on the use of Bambu Labs 3D Printers:
TPU and other flexible filaments are not permitted to be used inside the AMS. Please use those filaments via the external spool holder to avoid damaging the AMS system.
Please remember to use the correct side of the bedsheet depending on your filament, i.e. PLA or PETG. Bambu Studio might provide you with a warning to ensure the correct side of the bedsheet.
Please make sure to apply glue stick to the bed sheet if there isn't an adequate amount present. Your print will fail if there is not enough glue stick.
Do not change any of the settings on the machine, everything is adjusted automatically.Â
To use the bambu labs, log into the Bambu Labs printing network:
To use the bambu labs, log into the Bambu Labs printing network:
SSID: BambuNet
Password: Obtained after completion of the 3D Printing Quiz
How to connect to Bambu Labs 3D Printers:
How to connect to Bambu Labs 3D Printers:
On your computer
On your computer
Open Bambu Studio.
Navigate to the "Device" tab, you will see the following window.
On your computer
On your computer
Click on the Plus icon and you will see the list of the printers.
On your computer
On your computer
Click on the any printer to connect to it, you will see the following window.
On Po's screen
On Po's screen
Navitage to settings.
Open the network tab.
Copy the LAN Access code into bambu studio to connect to the printer.
On the Shifu's screen
On the Shifu's screen
Navitage to settings.
Open the general tab.
Copy the LAN Access code into bambu studio to connect to the printer.
On your computer
On your computer
Click confirm to connect the printer. Your screen should look like this after a successful connection.
Make sure the proper filament is loaded.
Make sure the correct bed sheet is installed.
Upload your GCode file and monitor the first layer of your print.
Make sure to collect your print upon completion.
Page updated
Google Sites
Report abuse