Embedded Files
研究室成員
研究室成員
Current Members
Current Members
梁凱裕(Kai-Yu Liang) PhD Student
近期研究方向－Investigation of Fe-Rich Intermetallics, Solidification Porosities, and Cooling Dynamics in 6061 Aluminum Alloy by Multiscale Characterization, Synchrotron X-ray Tomography, and ICME Approaches
f10527069@ntu.edu.tw
姚靈恩(Ling-En Yao) PhD Student
近期研究方向－Subgrain Boundary Melting and Grain Segmentation Induced by Semi-Solid Compression in Al-Cu Alloys: A Synchrotron X-ray Tomography Study
f10527061@ntu.edu.tw
黃浩銓(Hao-Chuan Huang) PhD Student
近期研究方向－An Integrated Experimental and Phase-Field Simulation Study on the Solidification Characteristics of Sustainable Aluminum Alloys and Emerging High-Entropy Alloys
f11527060@ntu.edu.tw
陳昱安(Yu-An Chen) PhD Student
近期研究方向－Investigation of microstructural evolution and material properties of martensitic stainless and alloy steels via combined hot working and heat treatment routes
(partner group member; co-instructed with Distinguished Prof. Jer-Ren Yang)
曾千育(Chien-Yu Tseng) PhD Student
近期研究方向－Effect of repeated-tempering induced martensite on the microstructural evolution in 17–7 PH stainless steel
(partner group member; co-instructed with Distinguished Prof. Jer-Ren Yang)
陳俊燁
(Chun-Yeh Chen)
Master Studentr13527007@ntu.edu.tw
陳惟捷
(Wei-Jie Chen)
Master Studentr13527a05@ntu.edu.tw
蕭宇呈
(Yu-Cheng Hsiao)
Master Studentr13527063@ntu.edu.tw
吳旻鴻
(Ming-Hung Wu)
Master Studentr13527042@ntu.edu.tw
林芷青
(Jhih-Ching Lin)
Master Studentr13527013@ntu.edu.tw
吳李函
(Lee-Han Wu)
Master Studentr13527094@ntu.edu.tw
鄭宇珊
(Yu-Shan Cheng)
Master Studentr13527a02@ntu.edu.tw
朱宸緯
(Chen-Wei Chu)
Master StudentR14527001@ntu.edu.tw
陳奕安
(I-An Chen)
Master Studentr14527046@ntu.edu.tw
郭柏廷
(Bo-Ting Kuo)
Master StudentR14527061@ntu.edu.tw
蔡宇凡
(Yu-fan Tsai)
Master StudentR14527a14@ntu.edu.tw吳勝達
(Myles Denzel Chua Delatore)
Master StudentR14527089@ntu.edu.tw
黃奕嘉
(I-Chia Huang)
Master StudentR14527A16@ntu.edu.tw洪嘉蔚
(Chia-Wei Hung)
Undergraduate StudentB10507048@ntu.edu.tw
林士堯
(Shih-Yao Lin)
Undergraduate StudentB11507037@ntu.edu.tw
鄭佩婷
(Cheng Pei-Ting)
Undergraduate StudentB11507033@ntu.edu.tw
温浩翔
(Cooa-Wuu Hoo)
Undergraduate StudentB12507019@ntu.edu.tw
李旭恩
(Syu-En Li)
Undergraduate StudentB12507002@ntu.edu.twSP&R Lab
Alumni
Alumni
陳政豪(Cheng-Hao Chen) MSc (110畢) 超輕可鍛LZ91與LAZ931鎂合金微結構演進和強化機制研究Microstructural evolution and strengthening mechanisms of ultralight wrought LZ91 and LAZ931 magnesium alloys
胡懷壬(Huai-Ren Hu) MSc (110畢) 等軸晶半固態鋁合金冶金性質與流變行為：由顆粒材料變形機制的啟發Metallurgical and rheological properties of equiaxed semi-solid aluminum alloy: inspiration from granular deformation mechanisms
郭亦揚(Yi-Yang Kuo) MSc (110畢) 半固態射出成型AZ91與超輕LAZ771合金的熱處理特性及微結構-機械性質關係研究Heat-treatment characteristics and structure-property relationships of thixomolded AZ91D and ultralight LAZ771 alloys
陳孟淳(Meng-Chun Chen) MSc (110畢) 以三維離散元素法探索半固態合金變形機制Exploring semi-solid alloy deformation with three-dimensional discrete element method simulations
許凱富(Kai-Fu Hsu) MSc (111畢) 無鉛肥粒鐵系快削不銹鋼之顯微組織、車削性及殘留應力分析研究Investigation of Ferrite Microstructure, Machinability, and Residual Stress in Lead-Free Ferritic Free-Cutting Stainless Steel
葉柏宏(Po-Hung Yeh) MSc (111畢) 塑性加工以及熱處理製程對雙相LAZ931鎂合金之奈米級析出物與機械性質之影響The effects of plastic deformation and heat treatment processes on nanoscale precipitates and mechanical properties of duplex-phase LAZ931 magnesium alloys賴姿羽(Tzu-Yu Lai) MSc (111畢) 半固態射出成型和熱處理AZ91、LAZ771和LAZ771+Ca鎂合金之顯微結構演變及機械性質研究A study of the microstructure evolution and mechanical properties of AZ91, LAZ771, and LAZ771+Ca magnesium alloys produced via thixomolding and heat treatments
李晨愷(Chen-Kai Lee) MSc (111畢) 基於COMSOL多物理模擬以及CALPHAD方法探討CoCrNiSi0.3中熵合金凝固和熱傳分析問題Analysis of Solidification and Heat Transfer Problems of CoCrNiSi0.3 Medium-Entropy Alloy with COMSOL Multiphysics and CALPHAD Method
黃子紜(Tzu-Yun Huang) MSc (112畢) 塑性加工以及熱處理製程對ZE51、ZE52鎂合金之奈米級析出物與機械性質之影響The effects of plastic deformation and heat treatment processes on nanoscale precipitates and mechanical properties of ZE51, ZE52 magnesium alloys
張帛軒(Po-Hsuan Chang) MSc (112畢) 凝固與熱機製程參數對於無鉛肥粒鐵系快削不銹鋼之顯微結構影響分析研究Investigation of the Influence of Solidification and Thermomechanical Process Parameters on the Microstructure of Lead-Free Ferritic Free-Cutting Stainless Steel
柯映亘(Ying-Hsuan Ko) MSc (112畢) 以計算流體力學－離散元素法耦合模擬與冷模實驗研究顆粒形狀與粉碎性質以及操作參數對高爐風徑區尺寸的影響Studying the Impact of Particle Shape, Breakage Properties, and Operating Parameters on the Size of the Raceway in the Blast Furnace Using CFD-DEM and Cold Model Experiment
曾敬堯(Ching-Yao Tseng) MSc (113畢)5052鋁合金介在物標準試片製備與快速分析技術之研究A Study on the Preparation of Standard Specimens and Rapid Analysis Techniques for Inclusions in 5052 Aluminum Alloy
詹于慧(Yu-Hui Chan) MSc (113畢)熱處理製程對 ZWM211 及 ZWM221 鎂合金軋板顯微結構與機械性質之影響Influence of Heat Treatment on the Microstructure and Mechanical Properties of Rolled ZWM211 and ZWM221 Magnesium Alloys
胡錫淵(Si-Yuan Hu) MSc (113畢)SiC複材顆粒對半固態射出成型與軋延板材AZ91與LAZ561Ca鎂合金之顯微結構與熱處理特性影響研究Effects of SiC Composite Particles on the Microstructure and Heat Treatment Characteristics of AZ91 and LAZ561Ca Magnesium Alloys Processed by Semi-Solid Injection Molding and Rolling
黃克宸(Ke-Chen Huang) MSc (113畢)應用離散元素法與同步輻射X光斷層掃描探討不同固相分率半固態鋁合金之晶粒形貌變化與變形機制Investigation of Grain Morphology Evolution and Deformation Mechanisms in Semi-Solid Aluminum Alloys with Varying Solid Fractions Using Discrete Element Method and Synchrotron X-ray Tomography
洪賢植(Hernan Felipe Puntes Cantor) MSc (113畢)基於多相流CFD與CFD-DEM方法研究氫氣作為輔助燃料對高爐風徑區尺寸的影響Study on the Impact of Hydrogen as an Auxiliary Fuel on the Blast Furnace Raceway Size Based on Multiphase CFD and CFD-DEM Methods
陸子柔(Tzu-Jou Lu) MSc (113畢)ER2594超級雙相不鏽鋼顯微組織演化特性研究Characteristics of micro structural evolution in ER2594 super duplex stainless steel(partner group member; co-instructed with Distinguished Prof. Jer-Ren Yang)
張芳誠(Fang-Cheng Chang) MSc (113畢)結合預時效與預應變處理對Al-Cu-Li合金的影響及T1析出物的銀鎂偏析現象Effect of Combined Pre-Treatments on Al-Cu-Li Alloy and Distribution of Ag and Mg in T1 Precipitate(partner group member; co-instructed with Distinguished Prof. Jer-Ren Yang)
李京諺 BSc (111畢)
陳建翔(Jian-Shiang Chen) Research Assistant (113畢) 現為皮托科技工程師
胡懷壬(Huai-Ren Hu) MSc (110畢) 等軸晶半固態鋁合金冶金性質與流變行為：由顆粒材料變形機制的啟發Metallurgical and rheological properties of equiaxed semi-solid aluminum alloy: inspiration from granular deformation mechanisms
郭亦揚(Yi-Yang Kuo) MSc (110畢) 半固態射出成型AZ91與超輕LAZ771合金的熱處理特性及微結構-機械性質關係研究Heat-treatment characteristics and structure-property relationships of thixomolded AZ91D and ultralight LAZ771 alloys
陳孟淳(Meng-Chun Chen) MSc (110畢) 以三維離散元素法探索半固態合金變形機制Exploring semi-solid alloy deformation with three-dimensional discrete element method simulations
許凱富(Kai-Fu Hsu) MSc (111畢) 無鉛肥粒鐵系快削不銹鋼之顯微組織、車削性及殘留應力分析研究Investigation of Ferrite Microstructure, Machinability, and Residual Stress in Lead-Free Ferritic Free-Cutting Stainless Steel
葉柏宏(Po-Hung Yeh) MSc (111畢) 塑性加工以及熱處理製程對雙相LAZ931鎂合金之奈米級析出物與機械性質之影響The effects of plastic deformation and heat treatment processes on nanoscale precipitates and mechanical properties of duplex-phase LAZ931 magnesium alloys賴姿羽(Tzu-Yu Lai) MSc (111畢) 半固態射出成型和熱處理AZ91、LAZ771和LAZ771+Ca鎂合金之顯微結構演變及機械性質研究A study of the microstructure evolution and mechanical properties of AZ91, LAZ771, and LAZ771+Ca magnesium alloys produced via thixomolding and heat treatments
李晨愷(Chen-Kai Lee) MSc (111畢) 基於COMSOL多物理模擬以及CALPHAD方法探討CoCrNiSi0.3中熵合金凝固和熱傳分析問題Analysis of Solidification and Heat Transfer Problems of CoCrNiSi0.3 Medium-Entropy Alloy with COMSOL Multiphysics and CALPHAD Method
黃子紜(Tzu-Yun Huang) MSc (112畢) 塑性加工以及熱處理製程對ZE51、ZE52鎂合金之奈米級析出物與機械性質之影響The effects of plastic deformation and heat treatment processes on nanoscale precipitates and mechanical properties of ZE51, ZE52 magnesium alloys
張帛軒(Po-Hsuan Chang) MSc (112畢) 凝固與熱機製程參數對於無鉛肥粒鐵系快削不銹鋼之顯微結構影響分析研究Investigation of the Influence of Solidification and Thermomechanical Process Parameters on the Microstructure of Lead-Free Ferritic Free-Cutting Stainless Steel
柯映亘(Ying-Hsuan Ko) MSc (112畢) 以計算流體力學－離散元素法耦合模擬與冷模實驗研究顆粒形狀與粉碎性質以及操作參數對高爐風徑區尺寸的影響Studying the Impact of Particle Shape, Breakage Properties, and Operating Parameters on the Size of the Raceway in the Blast Furnace Using CFD-DEM and Cold Model Experiment
曾敬堯(Ching-Yao Tseng) MSc (113畢)5052鋁合金介在物標準試片製備與快速分析技術之研究A Study on the Preparation of Standard Specimens and Rapid Analysis Techniques for Inclusions in 5052 Aluminum Alloy
詹于慧(Yu-Hui Chan) MSc (113畢)熱處理製程對 ZWM211 及 ZWM221 鎂合金軋板顯微結構與機械性質之影響Influence of Heat Treatment on the Microstructure and Mechanical Properties of Rolled ZWM211 and ZWM221 Magnesium Alloys
胡錫淵(Si-Yuan Hu) MSc (113畢)SiC複材顆粒對半固態射出成型與軋延板材AZ91與LAZ561Ca鎂合金之顯微結構與熱處理特性影響研究Effects of SiC Composite Particles on the Microstructure and Heat Treatment Characteristics of AZ91 and LAZ561Ca Magnesium Alloys Processed by Semi-Solid Injection Molding and Rolling
黃克宸(Ke-Chen Huang) MSc (113畢)應用離散元素法與同步輻射X光斷層掃描探討不同固相分率半固態鋁合金之晶粒形貌變化與變形機制Investigation of Grain Morphology Evolution and Deformation Mechanisms in Semi-Solid Aluminum Alloys with Varying Solid Fractions Using Discrete Element Method and Synchrotron X-ray Tomography
洪賢植(Hernan Felipe Puntes Cantor) MSc (113畢)基於多相流CFD與CFD-DEM方法研究氫氣作為輔助燃料對高爐風徑區尺寸的影響Study on the Impact of Hydrogen as an Auxiliary Fuel on the Blast Furnace Raceway Size Based on Multiphase CFD and CFD-DEM Methods
陸子柔(Tzu-Jou Lu) MSc (113畢)ER2594超級雙相不鏽鋼顯微組織演化特性研究Characteristics of micro structural evolution in ER2594 super duplex stainless steel(partner group member; co-instructed with Distinguished Prof. Jer-Ren Yang)
張芳誠(Fang-Cheng Chang) MSc (113畢)結合預時效與預應變處理對Al-Cu-Li合金的影響及T1析出物的銀鎂偏析現象Effect of Combined Pre-Treatments on Al-Cu-Li Alloy and Distribution of Ag and Mg in T1 Precipitate(partner group member; co-instructed with Distinguished Prof. Jer-Ren Yang)
李京諺 BSc (111畢)
陳建翔(Jian-Shiang Chen) Research Assistant (113畢) 現為皮托科技工程師
Page updated
Google Sites
Report abuse