Po-Yu Chen, Wei-Chung Wang*, and Yen-Ting Wu, 2019 Sep., “Experimental Investigation of Thin Film Stress by Stoney’s Formula,” Measurement, Vol. 143, pp. 39-50. (SCI)

Tzu-Yu Kuo, Wei-Chung Wang*, 2019 May, “Determination of Elastic Properties of Latewood and Earlywood by Digital Image Analysis Technique,” Wood Science and Technology, Vol.53, No. 3, pp. 559-577. (SCI)

Po-Chi Sung, Wei-Chung Wang*, Chi-Hung Hwang, and Guan-Ting Lai, 2018 Jan., “A Low-level Stress Measurement Method by Integrating White Light Photoelasticity and Spectrometry,” Optics and Laser Technology, Vol. 98, pp. 33-48. (SCI).

Khurram Amjad, David Asquith, Christopher M. Sebastian, Eann A. Patterson*, and Wei-Chung Wang, 2017 Nov., “The Interaction of Fatigue Cracks with a Residual Stress Field Using Thermoelastic Stress Analysis and Synchrotron X-Ray Diffraction Experiments,” Royal Society Open Science, Vol. 4, No. 11, pp. (171100)1-23. (SCI)

Khurram Amjad*, Wei-Chung Wang, and Eann A. Patterson, 2016 Apr., “A Comparison of Split-Sleeve Cold Expansion in Thick and Thin Plates,” Journal of Strain Analysis for Engineering Design, Vol. 51, No. 5, pp. 375-386. (SCI)

Po-Chi Sung, Wei-Chung Wang*, Yu-An Chiang, and Te-Heng Hung, 2015 Mar., “Investigation of Systematic Relationship between Spectrometry and White Light Photoelasticity by Regression Analysis,” Journal of Strain Analysis for Engineering Design, Vol. 50, No. 4, pp. 252-263. (SCI).

Ming-Hsing Shen, Chi-Hung Hwang and Wei-Chung Wang*, 2015 Mar., “Using Higher Steps Phase-Shifting Algorithms and Linear Least-Squares Fitting in White-Light Scanning Interferometry”, Optics and Lasers in Engineering, Vol. 66, pp. 165-173. (SCI).

Wei-Chung Wang*, Yu-An Chiang, Ken-Jen Yu, Yi-Chieh Ho, Hung-Tsan Shen, Ting-Yu Chang, Ya-Hsin Chang and Chun-Sheng Tsao, 2015 Feb., “Three-Dimensional Digital Image Correlation Measurement of Mechanical Properties of Soft Materials,” Meccanica, Vol. 50, No.2, pp. 419-428, 2015. (SCI).

Po-Chi Sung, Wei-Chung Wang*, Chi-Hung Hwang, and Meng-Hsiu Li, 2014 Aug., “Large-Area Full-Field Thickness Measurement of Glass Plates by an Optical Interferometric System”, Optics Communications, Vol. 333, pp. 243-252.

Peng, M. K., Y. C. Ho, W. C. Wang, Y. H. Chui and M. Gong, 2012.02, “Measurement of Wood Shrinkage in Jack Pine Using Three Dimensional Digital Image Correlation (DIC)”, Holzforschung, Vol. 66, Issue 5, pp. 639–643. SCI, EI.

Wang, W. C. and Y. L. Chang, 2011.12, “Experimental Investigation of Thermal Deformation in Thermoelectric Coolers”, Journal of the European Association for Experimental Mechanics, Vol. 47, No. 2, pp.232-237. 計畫編號：NSC 95-2221-E007-011-MY3.SCI, EI.

Wang, W. C. and T. Y. Wu, 2011.09, “Experimental and Numerical Analysis of Thermal Deformation in Thermoelectric Coolers”, Applied Mechanics and Materials, Vol. 70, pp. 399-404, 2011. 計畫編號：NSC 95-2221-E007-011-MY3. 計畫編號：NSC 100-2911-I-007-503. EI.

Peng, M. K., Y. H. Chui, Y. C. Ho, W. C. Wang and Y. T. Zhou, 2011.07, “Investigation of Shrinkage in Softwood Using Digital Image Correlation Method”, Applied Mechanics and Materials, Vol. 83, pp.157-167, 2011. EI.

Wang, W. C. and J. S. Hsu, 2010.06, “Investigation of Vibration Characteristics of Bonded Structures by Time-Averaged Electronic Speckle Pattern Interferometry”, Optics and Lasers in Engineering, Vol. 48, pp.958-965. 計畫編號：NSC 89-2212-E007-104 and NSC 91-2212-E007-034.SCI, EI.

Wang, W. C., C. Y. Ni and Y. H. Tsai, 2008.06, “Design of Ultrasonic Horns by Photomechanics Methods”, Journal of the European Association for Experimental Mechanics, Vol. 44, No. 3, pp. 248-252, 計畫編號: NSC 93-2212-E007-013 and NSC 94-2212-E007-007. (Invited Paper in a Special Issue) SCI, EI.

Wang, W. C.,Su CW and Liu PW﹐2008, “full-field non-destructive analysis of composite plates” (Submitted to COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, Vol. 39, No. 8, pp. 1302-1310 )

Wang, W. C., Ni CY , Tsai YH , 2008.01 “Design of ultrasonic horns by photomechanics methods” (Submitted to STRAIN, Vol. 44, No. 3, pp. 248-252 )

Wang, W. C., C. H. Hwang and K. H. Cheng, 2007.12, “Biharmonic Analysis of Whole-Field Stress and Strain in Optical Thin Films”. (Submitted to Experimental Mechanics) 計畫編號 : NSC 95-2212-E007-150.

Tsai, Y. H. and W. C. Wang, 2007.12, “Dynamic Stress Analysis of T-Shape Structural Components”. (Submitted to Experimental Mechanics) 計畫編號 : NSC 94-2212-E007-007.

Wang, W. C. and Y. H. Tsai, 2007.10, “The Stress Analysis of Ultrasonic Machining of GaN Substrates”. (Submitted to IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, revised version under review)計畫編號 : NSC 92-2212-E007-053 and NSC 93-2212-E007-013.

Wang, W. C. and H. F. Lin, 2007.11, “Hybrid Analysis of Vibration Behavior of Liquid Crystal Display Monitor”. (Submitted to IEEE Transactions on Consumer Electronics) 計畫編號 : NSC 93-2212-E007-013.

Wang, W. C., Chun-Yao Ni and Yin-Huang Tsai, 2007.12, “Design of Ultrasonic Horns by Photomechanics Methods”, Journal of the British Society of Strain Measurement, (Accepted) 計畫編號 : NSC 93-2212-E007-013 and NSC 94-2212-E007-007.

Wang, W. C., Chih-Wei Su and P. W. Liu, 2007.08, “Full-Field Nondestructive Analysis of Composite Plates”, (Submitted to Composites Part A, under revision) 計畫編號 : NSC88-2212-E007-006 and NSC94-2212-E007-007.

Wang, W. C. and Y. H. Tsai, 2006.12, “ Time-Averaged Photoelastic Stress Analysis of the Ultrasonic Wave in a Strip”, Experimental Mechanics, , 計畫編號 : NSC 92-2212-E007-053 and NSC 93-2212-E007-013.

Wei-Chung Wang, Shing Chen, Chun-Hsien Liu a nd Chun-Yao Ni, 2006. 09, “ The Design of a New Ultrasonic Horn for Flip-Chip Bonding ”, Key Engineering Materials, Vol. 326-328, pp. 505-508. 計畫編號： NSC94-2212-E007-007 and Industrial Technology Research Institute project no. C341AC12A0.

Wang, W. C. and Y. H. Tsai, 2006.08, “Digital Dynamic Photoelastic and Numerical Stress Analyses of a Strip”, Journal of Vibration and Control, Vol. 12 , No. 8, pp. 927-938. 計畫編號 : NSC 92-2212-E007-053.

Wang, W. C. and J. S. Hsu, 2006, 05, “I nvestigation of Analytical Solutions for Bonded Structures by Photomechanical Methods ”, Journal of the British Society of Strain Measurement, Vol. 42, No. 2, pp. 107-116 . 計畫編號： NSC-91-2212-E007-034. SCI, EI.

Wang, W. C., Y. M. Chen, M. S. Lin and C. P. Wu, 2005. 06, “Investigation of the Stress Field of a Near Surface Circular Hole”, Experimental Mechanics, Vol. 45, pp. 244-249. 計畫編號 : NSC84-2212-E007-078, NSC85-2212-E007-044, NSC86-2212-E007-027. SCI, EI

Wang, W. C. and J. S. Hsu, 2004. 07, “The Influence on the Distribution of Interfacial Stresses of Embedded Inclusions and Voids in the Adherend of Bimaterial Structures”, Measurement, Vol. 36, pp. 1-9. 計畫編號： NSC-91-2212-E007-034. SCI, EI.

Wang, W. C. and J. S. Hsu, 2004. 05, “Re-Examination on Thermal Stresses of Bonded Structures”, Journal of Strain Analysis for Engineering Design, Vol. 39, No. 3, pp.261~270. 計畫編號： NSC-91-2212-E007-034. SCI, EI.

Wang W. C. and J. C. Lin, 2003. 06, “Photoelastic Investigation of Bimaterial Interfacial Stresses Induced by Thermal Loading”, Journal of the British Society of Strain Measurement, Vol. 39, No. 4, pp. 143-148. 計畫編號： NSC-91-2212-E007-034. SCI, EI.

Wang, W. C. and K. H. Lai, 2003, “Hybrid Determination of Equivalent Characteristics of Perforated Plates”, Experimental Mechanics, Vol. 43, No. 2, pp.163-172. 計畫編號： NSC-82-0618-E007-323, 計畫編號： NSC-84-2212-E007-062, 計畫編號： NSC-86-2732-E007-001. SCI, EI.

Wang, W. C. and H. C. Shih, 2002. 08, “Hybrid Investigation on Residual Stresses Induced by Self-Drilling Screw on Polycarbonate Plates”, Optics and Lasers in Engineering, Vol. 38, pp.97-113. SCI, EI.

Wang, W. C. and C. H. Chen, 2002, “Investigation of Vibration Behavior of Patched Edge-Cracked Composite Plates“, Journal of Reinforced Plastics and Composites, Vol. 21, No. 6, pp. 533-557. 計畫編號： NSC-86-2212-E007-001, 計畫編號： NSC-87-2212-E007-032. SCI, EI.

Wang, W. C. and J. S. Hsu, 2000.08, "Investigation of the Size Effect of Composite Patching Repaired on Edge-Cracked Plates", Composite Structures, Vol. 49, pp. 415-423. 計畫編號： NSC-86-2212-E007-001, 計畫編號： NSC-87-2212-E007-032, 計畫編號： NSC-88-2212-E007-006. SCI, EI.

Wang, W. C. and K. H. Lai, 1999.11, “Experimental Investigation of Vibration of the Shadow Mask with Different Assembly Conditions", IEEE Consumer Electronics, Vol. 45, No. 4, pp. 1046~1056. 計畫編號： NSC-82-0618-E007-323, 計畫編號： NSC-84-2212-E007-062, 計畫編號： NSC-86-2732-E007-001. SCI, EI.

Lin, S.W. and W. C. Wang, 1999.07, “General Transfer Matrix Method for the Multi-Material Junction and Wedge Problems”, International Journal of Computational Mechanics, Vol. 23, No. 5, pp. 502~509. 計畫編號： NSC-88-2212-E007-007. SCI, EI.

Wang, W. C. and Y. H. Tsai, 1998.12, "Experimental Vibration Analysis of the Shadow Mask", Optics and Lasers in Engineering, Vol. 30, No. 6, pp. 539~550. 計畫編號： NSC-82-0618-E007-323, 計畫編號： NSC-84-2212-E007-062, 計畫編號： NSC-86-2732-E007-001. SCI, EI.

Wang, W. C. and C. H. Hwang, 1998.12, "Experimental Analysis of Vibration Characteristics of an Edge-Cracked Composite Plate by ESPI Method", International Journal of Fracture, Vol. 91, No.4, pp. 311~321. 計畫編號： NSC-82-0401-E007-299, 計畫編號： NSC-82-0618-E007-323, 計畫編號： NSC-83-0401-E007-007, 計畫編號： NSC-84-2212-E007-062. SCI , EI.

Wang, W. C. and T. B. Chiou, 1998.09, "Experimental Evaluation of Repair Efficiency of Composite Patching by ESPI”, Journal of Composite Materials, Vol.32, No.17, pp.1595~1616. 計畫編號： NSC-80-0401-E007-22 , NSC-80-0204-E007-22 , NSC-83-0404-D007-005 SCI , EI.

Wang, W. C., C. H. Day, C. H. Hwang and T. B. Chiou, 1998. 03," Nondestructive Evaluation of Composite Materials by ESPI", Research in Nondestructive Evaluation, Vol. 10, No. 1, pp. 1-15. 計畫編號： NSC-80-0401-E007-566 , 計畫編號： NSC 81-F-SP-007-02. SCI, EI.

Wang, W. C., C. H. Hwang and S. Y. Lin, 1996. 08, "Vibration Measurement by the Time-Averaged Electronic Speckle Pattern Interferometry Methods", Applied Optics, Vol. 35, No. 22, pp. 4502-4509. 計畫編號： NSC-82-0401-E007-299, 計畫編號： NSC-82-0618-E-007-323, 計畫編號： NSC-83-0401-E007-007, 計畫編號： NSC-84-2212-E007-062. SCI, EI.

Wang, W. C. and Y. M. Sheu, 1996. 01, "Half-Fringe Birefringent-Coating Analysis of Stresses Around Bolted Joints in CFRP Laminates", Journal of Composite Structures, Vol. 34, No. 1, pp. 91-100. SCI, EI. 計畫編號： NSC-88-2212-E007-007. SCI, EI.

Chen, J. T. and W. C. Wang, 1996. 03, "Experimental Analysis of An Arbitrarily Inclined Semi-Infinite Crack Terminated at the Bimaterial Interface", Experimental Mechanics, Vol. 36, No. 1, pp. 7-16. 計畫編號： NSC-77-0401-E-007-03, 計畫編 號： NSC-79-0401-E-007 -17. SCI, EI.

Chen, J. T. and W. C. Wang, 1995. 02, "Theoretical and Experimental Analysis of An Arbitrarily Inclined Semi-Infinite Crack Terminated at the Bimaterial Interface", Journal of Strain Analysis for Engineering Design, Vol. 30, No.2, pp.117-128. 計畫 編號： NSC-77-0401-E-007-03, 計畫編號： NSC-79-0401-E-007-17. SCI, EI.

Wang, M. J. and W. C. Wang, 1995. 02, "Investigation of Contact Stresses of a Rotating Cam by a Digital Photoelastic Method", Journal of the British Society for Strain Measurement, Vol. 31, No. 1, pp. 17-24. 計畫編號： NSC-82-115-C-159-507-E.SCI, EI.

Wang, W. C. and J. T. Chen, 1994. 05, "Singularities of an Arbitrarily Inclined Semi-Infinite Crack Meeting a Bimaterial Interface", Engineering Fracture Mechanics, Vol. 49, No. 5, pp. 671-680. 計畫編號： NSC-79-0401-E-007 -17. SCI, EI.

Wang, W. C. and C. H. Hwang, 1994. 05, "An Optical Phenomenon in Transient Thermal Caustic Experiments", Engineering Fracture Mechanics, Vol. 47, No. 5, pp. 659-672. 計畫編號： NSC-80-0401-E-007 -14, 計畫編號： NSC-79-0401-E-007-02.SCI, EI.

王偉中 , 簡森源 , 1993. 12, " 含週邊圓孔旋轉圓盤應力集中因子之數位光彈分析 ", 中華民國力學學會期刊 . Vol. 9, No. 4, pp. 331-345. 計畫編號： NSC-81-0401-E-007-113, 計畫編號： NSC-81-0401-E-007-14.

Wang, W. C., T. L. Chen, C. H. Hwang, 1993. 11, "Transient Thermal Stress Intensity Factors of Edge-Cracked Semi-Infinite Plates," Journal of Nuclear Engineering and Design, Vol. 143, No. 21, pp. 217-228. 計畫編號： NSC-80-0401-E-007-14, 計畫編號： NSC-79-0401-E007-02. SCI, EI.

Wang, W. C. and J. T. Chen, 1993.01, "Theoretical and Experimental Re- Examination of a Crack Perpendicular to and Terminating at the Bimaterial Interface", Journal of Strain Analysis for Engineering Design, Vol. 28, No. 1, pp. 53-61. 計畫編號： NSC-77-0401-E-007 -03 . SCI, EI.

Wang, M. J. and W. C. Wang, 1993. 01 "Transient Thermal Stress Analysis of a Near-Edge Elliptical Defect in a Semi-Infinite Plate Subjected to a Moving Heat Source", International Journal of Pressure Vessels and Piping. Vol. 57, No. 1, pp. 99-110. 計畫編號： NSC-80-0114-C-007 -17a. SCI, EI.

Wang, W. C., T. C. Chen, C. H. Hwang, and C. H. Lee, 1992. 03, "Digital Caustic Measurement of Stress-Optical Constants", Proceedings of the National Science Council, Part A, Vol. 16, No. 2, pp. 150-163. 計畫編號 : NSC-79-0401-E-007-02.

Wang, W. C., T. L. Chen, 1992. 01, "Transient Thermal Stress Analysis of Interacting Surface Defects by Digital Photoelasticity", Optical Engineering, Vol. 31, No. 1, pp.144-155. 計畫編號： NSC-78-0401-E-007 -06. SCI, EI.

Wang, W. C. and J. H. Day, 1991. 04, "On the Applicability of Orthotropic Fracture Theory to the Fracture of CFRP Laminates", Journal of Composite Structures, Vol. 19, No. 4, pp. 333-349. SCI, EI.

Wang, W. C. and W. M. Wu, 1991. 04, "Transient Thermal Stresses of Two Near-Edge Defects Due to a Moving Heat Source", Journal of Optics and Laser in Engineering, Vol. 15, No. 4, pp. 215-240. 計畫編號： NSC-78-0401-E-007 -06. SCI, EI

Wang, W. C. and J. T. Chen, 1991. 02, "Variational Analysis of Interfacial Stress Intensity Factors for Finite Bimaterial Plates Under Biaxial Load", Journal of Composite Structures, Vol. 17, No. 2, pp. 157-179. SCI, EI.

Wang, W. C., T. L. Chen and S. H. Lin, 1990. 10, "Digital Photoelastic Investigation of Transient Thermal Stresses of Two Interacting Defects", Journal of Strain Analysis for Engineering Design, Vol. 25, No. 4, pp. 215-228. 計畫編號： NSC-78-0401-E-007 -06. SCI, EI.

Wang, W. C., 1990. 05, "A Digital Imaging Algorithm for Extracting Stress Intensity Factor from the Photoelastic Fringe Pattern", Engineering Fracture Mechanics, Vol. 36, No. 5, pp. 683-696. SCI, EI.

王偉中 , 陳燦林 , 陳文華 , 1989, “ 應用半級光彈法於含邊緣裂縫平板之應力強度因子決定 ”, 中華民國力學學會期刊 , 第五卷 , 第一期 , 55~65 頁 .

Wang, W. C. and J. T. Chen, 1989, “Stress Analysis of Finite Interfacially Cracked Bimaterial Plates by Using the Variational Method,” Computer Methods in Applied Mechanics and Engineering, Vol. 73, No. 2, pp. 153~171.

Wang, W. C. and T. L. Chen, 1989, “Half-Fringe Photoelastic Determination of Opening Mode Stress Intensity Factor for Edge Cracked Strips,” Engineering Fracture Mechanics, Vol. 32, No. 1, pp. 111~122.

Wang, W. C. , C. Y. Chen and W. H. Chen, 1988, “Half-Fringe Photoelastic Analysis of Rectangular Plates Subjected to Transverse Loading,” Optical Engineering, Vol. 27, No. 8, pp. 636~640.

王偉中，陳建良，洪德恆，2012.12, “熱電致冷器相對翹曲量之量測與數值模擬”，中國機械工程學會第二十九屆全國學術研討會論文集，論文編號：2069，共七頁，December 7-8，2012. 計畫編號：NSC 101-2221-E-007-006.

王偉中，黃吉宏，莊子弘，陳永祥，朱駿逸，2012.11, ” 應用調變轉換函數於數位影像相關法之誤差探討”，中華民國力學學會第三十六屆全國力學會議論文集，論文編號：E-063，共六頁，November 16-17，2012.

陳永祥，黃吉宏，王偉中，2012.12, “ 魚眼鏡頭建立中空圓管內部全方位影像”，中國機械工程學會第二十九屆全國學術研討會論文集，論文編號：1056，共六頁，December 7-8，2012. 計畫編號：NSC 101-2221-E-492-007.

黃吉宏，陳永祥，王偉中，2012.12, ” 基於共圓架構之多攝影機圓周運動取像裝置”，中國機械工程學會第二十九屆全國學術研討會論文集，論文編號：1055，共六頁，December 7-8，2012。 計畫編號：NSC 101-2221-E-492-007.

Hwang, C. H., W. C. Wang, Y. H. Chen and T. H. Chung, 2012.11, ” Estimating Measurement Errors of the 3D-DIC Method with Optical Modulation Transfer Function Considered”, ISEM-ACEM-SEM-7th ISEM’12, Paper No. J119, 6 pages, The Grand Hotel, Taipei, Taiwan, November 8-11. 計畫編號：NSC 101-2221-E-492-007.

Hwang, C. H., W. C. Wang, Y. H. Chen, T. S. Liao and H. Y. Chou, 2012.11, ”Primary Design of a Multi-camera System with Circular Configuration for Deformation Measurement”, ISEM-ACEM-SEM-7th ISEM’12, Paper No. J120, 5 pages, The Grand Hotel, Taipei, Taiwan, November 8-11. 計畫編號：NSC 101-2221-E-492-007.

Shen, M. H., C. H. Hwang, W. C. Wang, Y. H. Chen and Y. H. Lin, 2012.11, “A New Optical System for Measuring Shape, In-Plane and Out-of-Plane Deformations and Deformation Gradient of Microstructures”, 2012 IUTAM Symposium on Advances of Optical Methods in Experimental Mechanics Exhibition, Paper No. A24, 11 pages, The Grand Hotel, Taipei, Taiwan, November 3-6. 計畫編號：NSC-98-2221-E-007-013-MY3.

Sung, P. C., W. C. Wang, C. H. Hwang and G. T. Lai, 2012.11, “A Novel Stress Measurement Method by Integrating Photoelasticity and Spectrometry”, 2012 IUTAM Symposium on Advances of Optical Methods in Experimental Mechanics Exhibition, Paper No. G10, 10 pages, The Grand Hotel, Taipei, Taiwan, November 3-6.計畫編號：NSC-98-2221-E-007-013-MY3.

Wang, W. C. and T. Y. Wu, 2012.06, “Experimental and Numerical Investigation of Thermal Deformation of Thermoelctric Coolers”, (Plenary Speech) SEM XII International Congress & Exposition on Experimental and Applied Mechanics, Costa Mesa, California, U. S. A., June 11-14. 計畫編號：NSC 95-2221-E007-011-MY3. 計畫編號：NSC 100-2911-I-007-503.

Wang, W. C., C. H. Hwang, Y. C. Tseng and P. C. Sung, 2012.06, “Measurement of Low Level Stress by Integrating Photoelasticity and Spectrometry”, SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Paper No. 203, Costa Mesa, California, U. S. A., June 11-14. 計畫編號：NSC-98-2221-E-007-013-MY3. (Accepted)

Wang, W. C., Y. A. Chiang,  Y. C. Ho, H. T. Shen, T. Y. Chang, Y. H. Changand C. S. Tsao, 2012.04, “Mechanical Properties Measurement of Soft Materials by Three-Dimensional Digital Image Correlation Method”, (Keynote Speech) International Conference on Computational and Experimental Engineering and Sciences, Crete, Greece, April 30- May 6. 計畫編號：NSC96-2221-E075B-001-MY3. 計畫編號：NSC98-2221-E007-012-MY3

王偉中，林育生，2011.12,”於不同溫濕負載下導光板翹曲量之探討”，中國機械工程學會第二十八屆全國學術研討會論文集，論文編號：C06-001，共六頁, December 10-11，2011，計畫編號：NSC-98-2221-E-007-012-MY3.

Wang, W. C.,C. H. Hwang, Y. L. Chang and Y. H. Chen, 2011.12,”A New Method for Extracting Fringe Patterns from Environment Noise Contaminated Time-Averaged ESPI Images”, Proceedings of the 6th Japan-Taiwan Workshop on Mechanical and Aerospace Engineering, Paper No. E05, 8 pages, Sapporo, Hokkaido, Japan, December 7-10. 計畫編號：NSC95-2221-E007-150 and NSC95-2221-E007-011-MY3.

王偉中，黃吉宏，陳維仁，宋泊錡，2011.11, ”結合光彈法與光譜儀之新型應力量測方法”，中華民國力學學會第三十五屆全國力學會議論文集，論文編號：D2-017, pp. 1105-1112, November 18-19，計畫編號：NSC 98-2221-E007-013-MY3.

Wang, W. C. and T. Y. Wu, 2011.09, “Experimental and Numerical Analysis of Thermal Deformation in Thermoelectric Coolers”, Proceedings of BSSM/SEM International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation for Validation (ISEV), Paper No. 107, 6 pages, Royal College of Physicians, Edinburgh, September 7-9. 計畫編號：NSC 95-2221-E007-011-MY3. 計畫編號：NSC 100-2911-I-007-503.

Wang, W. C., C. H. Hwang, W. R. Chen and P. C. Sung, 2011.09, “ A New Stress Measurement Method by Integrating Photoelasticity and Spectrometry”, (Invited Keynote) Proceedings of International Conference on Advanced Technology in Experimental Mechanics, 10 pages, Kobe, Japan, September 19-21. 計畫編號：NSC-98-2221-E-007-013-MY3.

Wang, W. C. and T. Y. Wu, 2011.06, “Thermal Deformation Measurement in Thermoelectric Coolers by ESPI and DIC Method”, Proceedings of SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Paper No. 132, 11 pages, Mohegan Sun, Connecticut, U. S. A., June 13-16. 計畫編號：NSC 95-2221-E007-011-MY3.

王偉中, 吳亭瑩, 2010.12, “應用光學方法於熱電致冷晶片之熱變形量測”, 中國機械工程學會第二十七屆全國學術研討會論文集, 文章號碼:CC07-004, 共六頁, 台北, 台灣. 計畫編號：NSC 95-2221-E007-011-MY3.

Peng, M. K., Y. H. Chui, Y. C. Ho, W. C. Wang and Y. T. Chou, 2010.11, “Investigation of Shrinkage in Softwood Using Digital Image Correlation Method”, Proceedings of International Conference on Experimental Mechanics 2010, Paper No. 1582, 6 pages, Kuala Lumpur, Malaysia, November 28-December 1, 2010.

Wang, W. C., B. F. Chen and Y. C. Ho, 2010.11, “New Calibration Procedures for Three-Dimensional Digital Image Correlation Method”, Proceedings of International Conference on Experimental Mechanics 2010, 8 pages, Kuala Lumpur, Malaysia, November 28-December 1, 2010.

Wang, W. C., 2010.11, “Recent Developments of the Tree-Dimensional Digital Image Correlation Method”, (Invited Speech) International Conference on Experimental Mechanics 2010, Paper No. 1687, 11 pages, Kuala Lumpur, Malaysia, November 28-December 1, 2010.

Wang, W. C., T. Y. Chang and C. M. Ting, 2010.11,“Nondestructive Testing of CFRP Components of Bicycles”, Proceedings of the 7th Asian-Australasian Conference on Composite Materials, Paper No.: OF-012A, 4 pages, Taipei, Taiwan, November 15-18.

王偉中、陳柏甫、何義傑, 2010.11, “三維數位影像相關法之新校正程序”, 中華民國力學學會第三十四屆全國力學會議, 文章號碼, 共六頁, 雲林, 台灣.

Chen, W. T., Y. L. Lin, C. F. Chien, D. T. Chang, H. W. Chiang and W. C. Wang, 2010.07, “Implementation of the University-Industry Collaboration at NTHU in Taiwan”, Proceedings of 2010 International Conference on Engineering Education, Paper No.: 1247, 4 pages, Gliwice, Poland, July 18-22.

Wang, W. C., H. C. Wu and C. R. Tai, 2010.07, “Current International Network for International Administration Officers at National Tsing Hua University”, Proceedings of 2010 International Conference on Engineering Education, Paper No. 1136, 4 pages, Gliwice, Poland, July 18-22.

Patterson, S. M., Y. C. Ho and W. C. Wang, 2010.07, “The Effect of Cyclic Loading on the Mechanical Performance of Surgical Mesh”, Proceedings of The 14th International Conference on Experimental Mechanics (ICEM14), Paper No.: 21007, 8 pages, Poitiers, France, July 4 - 9, 2010.

Wang, W. C. and Y. H. Chang, 2010.06, “Digital Shadow Moire Measurement of Out-of-Plane Hygrothermal Displacement of TFT-LCD Backlight Modules”, Proceedings of SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Paper No.: 228, 14 pages, Indianapolis, Indiana, U. S. A., June 7-10, 2010. 計畫編號：NSC-95-2221-E-007-011-MY3.

王偉中、張雅欣, 2009.11, “薄膜電晶體液晶顯示器背光模組之平面外溫濕位移場量測”, 中國機械工程學會第二十六屆全國學術研討會論文集, 文章號碼: C07-014, 共六頁, 台南, 台灣, 計畫編號：NSC-95-2221-E-007-011-MY3.

Wang, W. C., P. W., Liu and C. S. Tsao, 2009.11, “Investigation of Photoviscoelastic Material Properties of Epoxy Resin”, Proceedings of of The 4th International Conference on Experimental Mechanics, Paper No.: 351, 11 pages, Singapore, December17-21. 計畫編號：NSC 95-2221-E-011-MY3

王偉中、曹鈞勝, 2009.11, “光黏彈材料光學性質之探討”, 中華民國力學學會第三十三屆全國力學會議, 文章號碼：E2-150, 共四頁, 苗栗, 台灣, 計畫編號: NSC 95-2221-E-011-MY3.

Wang, W. C., K. J. Yu , C. B. Liu, T. P. Chu, H. T. Shen and T. Y. Chang, 2009.10, “Measurement of Mechanical Properties and Deformation of Artificial Mesh and Animal Fascia by Digital Image Correlation Method”, (Invited Lecture) SEM Fall Symposium on Advanced Imaging Methods, Columbia, South Carolina, U.S.A., October 5–7, 2009計畫編號：NSC90-2212-E007-098.

Wang, W. C., T. Y. Wu and B. F. Chen, 2009.10, “Investigation of Thermal Deformation of Thermal Electrical Cooler by Digital Image Correlation Method”, Proceedings of The Fifth Taiwan-Japan Workshop on Mechanical and Aerospace Engineering, 10 pages, Nantou, Taiwan, Oct. 21-24, 2009. 計畫編號：NSC95-2221-E007-011-MY3.

Wang, W. C. and C. H. Hwang, 2009.09, “The Development and Applications of Amplitude Fluctuation Electronic Speckle Pattern Interferometry Method”, (Invited Lecture) Symposium on the Recent Advances in Mechanics, Athens, Greece, September 16-19, 2009.

Wang, W. C. and H. C. Chan, 2009.08, “ New University-Industry Collaborative Model for Attracting International Students to Taiwan”, Proceedings of 2009 International Conference on Engineering Education, 5 pages, Seoul, Korea, August 23-28.

王偉中,余堅忍,劉正彬,沈宏燦,張廷宇, 2009. 07, “應用數位影像相關法探討人工網膜植入動物體內機械性質的變化”, 第三屆海峽兩岸實驗力學研討會, 中國內蒙古,7月28日-7月29日. 計劃編號：NSC90-2212-E007-098.

Wang, W. C., K. J. Yu , C. B. Liu, T. P. Chu, H. T. Shen and T. Y. Chang, 2009.06, “Measurement of Mechanical Properties and Deformation of Artificial Mesh by Digital Image Correlation Method”, Proceedings of 2009 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Paper No. 172, 9 pages, Albuquerque, New Mexico, USA, June 1-4. 計畫編號：NSC90-2212-E007-098.

Wang, W. C. and C. S. Chiang, 2008.12, “Evaluation of Defects in Pressure Vessels”, Proceedings of The 3rd International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics (Keynote Lecture), 6 pages, Tainan, Taiwan, December 7-10. 計畫編號：NSC91-2212-E007-034.

王偉中, 余堅忍, 劉正彬和張廷宇﹐2008. 11, “人工網膜與動物筋膜之機械性質量測”, 中華民國機械工程學會第二十五屆全國會議論文集, 文章號碼：C07-08, 共六頁, 彰化, 台灣. 計畫編號：NSC96-2221-E075B-MY3.

王偉中, 劉柏?, 2008.11, “光黏彈材料機械性質之探討”, 中華民國力學學會第三十一屆全國力學會議論文集, 文章號碼：F004, 共六頁, 嘉義, 台灣. 計畫編號：NSC 95-2221-E-011-MY3.

Wang, W. C., H. H. Hsu and Y. H. Chang, 2008.11, “Experimental and Numerical Analysis of Hygrothermal Deformation of Backlight Modules”, Proceedings of The International Conference on Experimental Mechanics 2008 (Invited Speech), Paper No. A-20, 15 pages, Nanjing, China, November 8-11. 計畫編號：NSC95-2221-E007-150.

Wang, W. C., C. H. Hwang and Y. L. Chang, 2008.10, “Re-examination of the Time-Averaged Electronic Speckle Pattern Interferometry Method on Vibration Measurement”, Proceedings of the International Symposium to Commemorate the 60th Anniversary of the Invention of Holography, pp. 228-237, Springfield, Massachusetts, October 27-29. 計畫編號：NSC95-2221-E007-150 and NSC95-2221-E007-011-MY3.

Wang, W. C., C. H. Hwang and K. H. Cheng, 2008.08, ”Evaluation of Whole-Field Thin-Film Stress and Strain by the Biharmonic Function”, Proceedings of 22nd International Congress of Theoretical and Applied Mechanics, Paper No. ICTAM081D 11157, 2 pages, Adelaide, Australia, August 24-30. 計畫編號：NSC95-2212-E007-150.

Wang, W. C., 2008.07, “International Academic-Industry Partnership through an Internship Program”, Proceedings of 2008 International Conference on Engineering Education, Paper No. 289, 5 pages, Pecs and Budapest, Hungary, July 28-31.

Wang, W. C. and C. S. Chiang, 2008.06, “Nondestructive Inspection of Defects in Pressure Vessels”, 2008 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Orlando , Florida , June 2-5. (Accepted) 計畫編號： NSC90-2212-E007-098.

Wang, W. C. and Y. L. Chang, 2008.06, “Therml Deformation Measurement in Thermoelectric Coolers by ESPI”, 2008 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Orlando , Florida , June 2-5. (Accepted) 計畫編號： NSC95-2221-E007-011-MY3.

王偉中 , 許軒豪 , 2007.12, “ TFT-LCD 背光模組熱濕變形之實驗探討 ”, 中華民國力學學會第三十一屆全國力學會議論文集 , 文章號碼 ： F01, 共六頁 , 高雄 , 台灣 . 計畫編號： NSC95-2221-E007-150.

王偉中 , 黃吉宏和 鄭凱鴻 , 2007. 11, “ 一種新的全域性計算光學薄膜中殘留應力方法 ”, 中華民國機械工程學會第二十四屆全 國會議論文集 , 文章號碼 ： C07-0032, 共七頁 , 中壢 , 台灣 . 計畫編號： 95-2221-E007-150.

Wei-Chung Wang, Chih-Wei Su and Po-Wen Liu, 2007.09, “Nondestructive Analysis of Composite Plates Containing Defects”, International Conference on Advanced Technology in Experimental Mechanics, Paper No.: OS03-2-3, 6 pages, Fukuoka , Japan , .September 12-14. 計畫編號： NSC91-2212-E007-034.

Wei-Chung Wang, Yin-Huang Tsai and Chun-Yao Ni, 2007.07, “Novel Applications of Experimental Mechanics on the Design of Ultrasonic Horns”, The 13 th International Conference on Experimental Mechanics, Paper No. 80, 8 pages, Alexandroupolis , Greece , July 1-6.. 計畫編號： NSC 92-2212-E007-053, NSC 93-2212-E007-013 and NSC-94-2212-E007-007.

Wei-Chung Wang and Jen-Chang Lin, 2007.06, “Scattered-Light Photoelastic and Numerical Investigation of Thermal Stresses in Bimaterial Structural Components”, 7 th International Congress on Thermal Stresses, Paper No. 06-10150, 4 pages, Taipei , Taiwan , June 4-7. 計畫編號： NSC93-2218-E007-040 and NSC94-2212-E007-016.

Wei-Chung Wang and Yin-Huang Tsai, 2007.06, “Dynamic Photoelastic and Numerical Analyses of T-Shape Structural Componenets under Impact”, 2007 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Paper No. 39, 9 pages, Springfield , Massachusetts , U. S. A. , June 3-6. 計畫編號： NSC 92-2212-E007-053, NSC 93-2212-E007-013 and NSC-94-2212-E007-007..

王偉中 , 賴文光 , 2006. 12, “ 含缺陷群雙層材料構件之熱應力分析 ”, 中華民國力學學會第三十屆全國力學會議論文集 , 文章號碼： 379, 共七頁 , 彰化 , 台灣 , 12 月 15~16 日 , 1996 . 計畫編號 ： NSC94 -2212-E007-016

王偉中 , 陳興 和 倪君耀 , 2006. 11, “ 超音波鍵合工具頭之設計與量測 ”, 中國機械工程學會第二十三屆全 國會議論文集 , 文章號碼： C10-008, 共七頁 , 台南 , 台灣 , 11 月 24~25 日 , 1996 . 計畫編號： NSC94-2212-E007-007

Wei-Chung Wang, Shing Chen, Chun-Hsien Liu a nd Chun-Yao Ni, 2006. 09, “ The Design of a New Ultrasonic Horn for Flip-Chip Bonding ”, Proceedings of The International Conference on Experimental Mechanics 2006, Paper No. P1279, 4 pages, September 27-29, Jeju , Korea . 計畫編號： NSC94-2212-E007-007 and Industrial Technology Research Institute project no. C341AC12A0.

Wang, W. C. and Y. H. Tsai, 2006. 06, “ Ultrasonic Stress Analysis of V-Notched Strip by Time-averaged Photoelasticity and FEM ”, Proceedings of 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, paper no. 167, 11 pages, St. Louis , Missouri , U. S. A. June 5-7. 計畫編號： NSC 92-2212-E007-053 and NSC 93-2212-E007-013.

王偉中 , 楊居正 , 2005. 12, “ 以振動方式對含缺陷複材平板進行非破壞檢測 ”, 中華民國力學學會第二十九屆全國力學會議論文集 , 共七頁 , 新竹 , 台灣 . 計畫編號： NSC93-2212-E007-013.

Wang, W. C., 2005. 11, “Nondestructive Inspection and Stress Analysis of Structural Components by Optical Techniques”, The Third Taiwan-Japan Workshop on Mechanical and Aerospace Engineering, Hualian, 9 pages, T AIWAN , R.O.C. Nov. 28-29, 2005 . 計劃編號： NSC-79-0401-E-007-17, NSC-80-0204-E007-22, NSC-80-0401-E007-566, NSC-81-F-SP-007-02, NSC-82-0401-E007-299, NSC-82-0618-E007-323, NSC-83-0401-E007-007, NSC-83-0404-D007-005, NSC-84-2212-E007-062, NSC-86-2212-E007-001, NSC-87-2212-E007-032, NSC-88-2212-E007-006, NSC-88-2212-E007-007, NSC-91-2212-E007-034, NSC93-2218-E007-040

王偉中 , 張介宙 , 2005. 11, “ 以頻率響應函數相關函數求取多孔平板等效材料係數 ”, 中華民國機械工程學會第二十二屆全 國力學會議論文集 , 共七頁 , 中壢 , 台灣 . 計畫編號： NSC90-2212-E007-098

Wang, W. C. and Lin, J. C., 2005. 10, “ Scattered-Light Photoelastic Investigation of Bimaterial Structures under Thermal Loading ”, Proceedings of the the 5 th International Conference on Mechanics of Time Dependent Materials, Karuizawa, Japan , October 3-6. 計劃編號： NSC93-2218-E007-040

Wang, W. C. and Lin, H. F., 2005. 09, “Hybrid Investigation of Vibration Behavior of Liquid Crystal Display Monitor”, Proceedings of the the International Congress on Experimental Mechanics, New Delhi, India, September 3-6, 2005. 計劃編號： NSC-93-2212-E007-013

王偉中 , 吳政邦 , 2005. 08, “ 近邊界裂縫應力場之光彈分析 ”, 第一屆海峽兩岸實驗力學研討會 , 中國北京 ,7 月 30 日 -8 月 1 日 . 計劃編號：： NSC85-2212-E007-044, 計畫編號： NSC86-2212-E007-027

Wang, W. C. and Z. Y. Chen, 2005.06, “Photoelastic Investigation of Thermal Stresses in the Horn of an Ultrasonic Machine”, Proceedings of the 2005 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, paper no. 120, 8 pages, Portland , Oregon , U. S. A. , June 7-9. 計劃編號： NSC 92-2212-E007-053 、 NSC 93-2212-E007-013

Hsu, J. S. and W. C. Wang, 2004.12, “Experimental Investigation of Vibration Behaviors of Bonded Structures”, Proceedings of the 3r d International Conference on Experimental Mechanics, 6 pages, Singapore , November 29- December 1. 計劃編號： NSC 91-2212-E007-034

Wang, W. C. and Y. H. Tsai, 2004.12, “Ultrasonic Stress Analysis of a Strip by the Time-Averaged Photoelastic Method”, Proceedings of the 3r d International Conference on Experimental Mechanics, 6 pages, Singapore , November 29- December 1. 計劃編號： NSC 92-2212-E007-053

王偉中 , 邵耀賢 , 2004.12, “ 以電子束雲紋法探討雷射鑽孔殘留熱應變 ”, 中華民國力學學會 第二十八屆全國力學會議論文集 , 共七頁 , 台北 , 台灣 .

王偉中 , 林礽昌 , 2004.11, “ 印刷電路板切割 之 應變量測 ”, 中國機械工程學會 第二十一屆全國學術研討會論文集 , 共四頁 , 高雄 , 台灣 .

Wang, W. C. and Y. H. Tsai, 2004.08, “Ultrasonic Stress Analysis of a Strip by Photoelasticity and FEM”, Proceedings of the 12 th International Conference on Experimental Mechanics, paper no. 83, 8 pages, Bari , Italy , August 31-September 3. 計劃編號： NSC 92-2212-E007-053

Wang, W. C. and J. S. Hsu, 2004.06, “Optical Investigation of Mechanical Behaviors of Bonded Structures”, paper no. 182, 9 pages, Proceedings of SEM X International Congress & Exposition on Experimental Mechanics, Costa Mesa , California , U. S. A. , June 7-10. 計劃編號： NSC 91-2212-E007-034

王偉中 , 黃煒展 , 2003. 12, “ 電子構裝體表面行為之數位投影雲紋法探討 ”, 第二十七屆中華民國力學會議論文集 , 台南 , 台灣 , 共六頁 .

王偉中 , 蔡英煌 , 2003. 12, “ 矩形平板之超音波應力分析 ”, 第二十屆全國機械工程學術研討會論文集第 C 冊上集 , pp. 369~376, 台北 , 台灣 , 計畫編號： NSC92-2212-E007-053.

Wang, W. C, H. L. Chao, R. Z. Shen, Y. M. Chen and M. S Lin, 2003. 09, “Investigation of Modified Hertz Contact Theory”, Proceedings of International Conference on Advanced Technology in Experimental Mechanics, (Invited paper) Nagoya , Japan , September10-12, 2003.

Wang, W. C., 2003. 06, “Application of Optical Methods on Stress Analysis and Nondestructive Testing of Composite Materials”, SEM Annual Conference on Experimental Mechanics, Charlotte, North Carolina, U. S. A., June 2-4, 2003. 計畫編號： NSC 91-2212-E007-034

Wang, W. C., Y. M. Chen and M. S. Lin, 2003. 06, “Investigation of Contact Stresses of a Plate Containing a Circular Hole near the Edge”, Proceedings of SEM Annual Conference on Experimental Mechanics, Charlotte, North Carolina, U. S. A., June 2-4, 2003. 計畫編號： NSC84-2212-E007-078, 計畫編號： NSC85-2212-E007-044, 計畫編號： NSC86-2212-E007-027.

Wang, W. C. and J. S. Hsu, 2002. 12, “Theoretical, Experimental and Numerical Investigations on the Interfacial Stresses of Bonded Structures”, paper no. 274, 6 pages, International Symposium on Experimental Mechanics, Taipei, Taiwan, R.O.C., December 28-30. 計畫編號： NSC91-2212-E007-034

Wang, W. C. and K. H. Lai, 2002. 12, “Hybrid Determination of Equivalent Characteristics of the Shadow Mask”, paper no. 263, 6 pages, International Symposium on Experimental Mechanics, Taipei, Taiwan, R.O.C., December 28-30.

王偉中 , 吳俊生 , 2002. 11, “ 電子構裝切削後之熱行為探討 ”, 第十九屆全國機械工程學術研討會 , 共八頁 , 虎尾 , 台灣 .

Hsu, H. Y. and W. C. Wang, 2002. 08, “Enhancing Employability Skill Through Computer Education-A Study of Information System Program in Taiwan ”, paper no. 082, 4 pages, International Conference on Engineering Education, Manchester , U. K., August 18-21.

Wang, W. C. and G. Y. Yeh, 2002.06, “ Investigation of Stress Singularities of Wedge Composite Plates Subjected to Transverse Load”, SEM Annual Conference and Exposition, Milwaukee , Wisconsin , U.S A., June 10-12. 計畫編號： NSC90-2212-E007-038

Wang, W. C. and J. S. Hsu, 2002.06, “Reduction of Interfacial Stresses of the Bonded Structures by Embedded Inclusion and Void”, paper no. 82, 4 pages, SEM Annual Conference and Exposition, Milwaukee , Wisconsin , U.S A., June 10-12.

王偉中 , 劉子源 , 賴凱弘 , 2002.05, “ 元件排列對 PCI 介面卡振動行為影響之探討 ”, 中華民國振動與噪音工程學會第十屆學術研討會論文集 , pp.287-294 , 台北 , 台灣 . 計畫編號： NSC89-2212-E007-012.

Hsu, J. S and W. C. Wang, 2001.10, “Photoelastic Investigation on Thermal Stresses in Bonded Structures”, Proceedings of the 3 rd International Conference on Experimental Mechanics, pp. 170-173, Beijing , China , October 15-17.

Wang, W. C and Y. U. Liu, 2001.10, “Measurement of Warpage of Electronic Packagings after Machining by Phase-Shifting Shadow Moire Method”, Proceedings of the 3 rd International Conference on Experimental Mechanics (Plenary Paper) , pp. 20-24, Beijing , China , October15-17, 2001.

Wang, W. C. and J. C. Lin, 2001,10, “Photoelastic Investigation of Bimaterial Interfacial Stresses”, Proceedings of Joint Asian Pacific Conference on Fracture and Strength'01 and ATEM'01, pp.778-783, Sendai , Oct. 20-22.

Wang, W. C. and H. S. Liu, 2001.10, “Investigation of Singular Behavior of Wedge Composite Plates under Transverse Loading”, Proceedings of Joint Asian Pacific Conference on Fracture and Strength'01 and ATEM'01, pp. 627-632, Sendai , Oct. 20-22.

Lai, K. H. and W. C. Wang, 2001,06, “Hybrid Analysis of the Vibration Behavior of Perforated Plates”, Proceedings of the SEM Annual Conference on Experimental And Applied Mechanics, pp. 71-74, Portland, Oregon, U.S.A., June4-6.

Wang, W. C., C. H. Hwang and T. W. Hsu, 2001.06, “The Intrinsic Characteristics of the ESPI Fringe Patterns”, Proceedings of the SEM Annual Conference on Experimental And Applied Mechanics, pp. 422-425, Portland, Oregon, U.S.A., June4-6.

賴凱弘 , 王偉中 , 2001, “ 含孔平板動態行為之混合法探討 ”, 中華民國振動與噪音工程學會第九屆學術研討會論文集 , pp.21-28 , 計畫編號： NSC89-2212-E007-012.

王偉中 , 賴凱弘 , 2000.12 , ” 彈性支撐構件動態行為之混合法探討 ”, 第二十四屆 中華民國力學會議論文集 , H73-80, 中壢 , 台灣 . 計畫編號： NSC89-2212-E007-012.

王偉中 , 沈瑞璋 , 2000.12, ” 修正接觸理論之光彈實驗探討 ”, 第二十四屆中華民 國力學會議論文集 , 中壢 , 台灣 , H65-72, 計畫編號： NSC84-2212-E007-078 , NSC85-2212-E007-044 , NSC86-2212-E007-027.

王偉中 , 張俊鴻 , 2000.12, ” 不同邊界條件下平板振動行為之探討 ”, 第十七屆全 國機械工程學術研討會論文集 , 共 8 頁 , 高雄 , 台灣 . 計畫編號： NSC88-2212-E007-006 , NSC89-2212-E007-012 .

Wang, W. C. and H. J. Shih, 2000.11, “Investigation on Residual Stresses Induced by Self-Drilling Screw on Polycarbonate Plates”, Proceedings of the 2 nd International Conference on Experimental Mechanics, pp. 66-71, Singapore , November 29- December 1.

Yu, M. H. and W. C. Wang, 2000.08, “On Emulation of Multimedia Teaching Material Projects”, Proceedings of the International Conference on Engineering Education, paper No.WB4-2, 5 pages, Taipei , August 14-16.

Chang, H. H. and W. C. Wang, 2000.08, “The Improvement and Upgrade of Conventional Industries through University-Industry Collaboration”, Proceedings of the International Conference on Engineering Education, paper No.WC7-3, 5 pages, Taipei , August 14-16.

Wang, W. C., 2000.08., “The Present Status and Outlook of Taiwan's Technology Transfer” , paper No.WD9-3, 1 page, Panel paper for Panel (2) : Commercializing University-Developed Technologies: Innovative Approaches, International Conference on Engineering Education, Taipei , August 14-16.

Wang, W. C. and M. Z. Peng, 2000.06, “Stress Analysis of Electronic Connectors by Photoelasticity”, Proceedings of the 2000 SEM IX International Congress on Experimental Mechanics, pp.545-548, Orlando , Florida . U.S.A., June 5-8, 計畫編號： NSC-86-2212-E007-27.

王偉中 , 劉皇興 , 1999.12, “ 楔形平板應力奇異性之理論與實驗探討 ” , 第十六屆全國機械工程學術研討會論文集 , pp.679-686, 計畫編號： NSC88-2012-E007-007.

王偉中 , 彭茂榮 , 1999.12, “ 電子連接器中應力之光彈分析 ” , 第二十三屆中華民國力學會議論文集 , pp.509-516, 計畫編號： NSC86-2212-E007-027.

Wang, W. C. and C. H. Day, 1999.11,“Evaluation of Repair Efficiency of Composite Materials by Hybrid Method”, Proceedings of the Fifth Far-East Conference on Nondestructive Testing, pp.41-49, Kenting,Taiwan.

Wang, W. C. and M. H. Yu, 1999.08, “A Successful University-Industry Collaboration Model-TCFST”, Proceedings of the International Conference on Engineering Education, paper No.285, 8 pages, Technical University of Ostrava, Czech Republic, August 10-12.

Yu, M. H. and W. C. Wang, 1999.08, “On Emulation of Special Projects”, Proceedings of the International Conference on Engineering Education, paper No.284, 8 pages, Technical University of Ostrava, Czech Republic, August 10-12.

Wang, W. C. and C. H. Chen, 1999.07, “Experimental Investigation of Vibration Behavior of Patched Composite Plates”, Proceedings of the 12 th International Conference on Composite Materials, paper No.930, 9 pages, Paris , France , July 5-9, 計畫編號： NSC-82-0401-E007-323, and 計畫編號： NSC-88-2212-E007-006.

Wang, W. C. and K. H. Lai, 1999.07, “Experimental Vibration Analysis on the Assembly Conditions of the Shadow Mask”, Proceedings of the International Conference on Advanced Technology in Experimental Mechanics, pp.593~598, Ube, Japan, July 21-24, 計畫編號： NSC-82-0618-E007-323, 計畫編號： NSC-84-2212-E007-062, 計畫編號： NSC-86-2732-E007-001.

Wang, W. C. and J. S. Hsu, 1999.07, “Investigation of the Dynamic Characteristics of Defected Components Repaired by Composite Patchings”, Proceedings of the International Conference on Advanced Technology in Experimental Mechanics, pp.63~68, Ube, Japan, July 21-24, 計畫編號： NSC-82-0401-E007-323, 計畫編號： NSC-85-2212-E007-042, 計畫編號： NSC-86-2212-E007-001.

Hwang, C. H. and Wang, W. C., 1999.07, “On the Vibration Measurement by Using Electronic Speckle Metrologies with Different Driving Force Levels”, Proceedings of the International Conference on Advanced Technology in Experimental Mechanics, pp.605~610, Ube, Japan, July 21-24, 計畫編號： NSC-82-0401-E007-299, 計畫編號： NSC-82-0618-E007-323, 計畫編號： NSC-83-0401-E007-007, 計畫編號： NSC-84-2212-E007-062.

Wang, W. C. and H. L. Chao, 1999.06, “On the Modification of Hertz Contact Theory”, Proceedings of the 1999 SEM Spring Conference on Theoretical, Experimental and Computational Mechanics, pp.245~248, Cincinnati , Ohio . U.S.A., June 7-9, 計畫編號： NSC-86-2212-E007-27.

Lin, S. W. and W.C. Wang, 1999.06, “New Concept from the Standardization of Complex Eigensolutions for Wedges and Junctions”, Proceedings of the Inter- Pack '99, pp.2053~2060, Maui , Hawaii , U. S. A. , June 13-19, 計畫編號： NSC-88-2212-E007-007.

王偉中 , 徐炯勛 , 陳見華 , 1999.05, “ 含邊緣裂縫平板之動態特性探討 ”, 中華民國振動與噪音工程學會第七屆學術研討會論文集 , pp. 93~100, 計畫編號： NSC-86-2212-E007-001, 計畫編號： NSC-87-2212-E007-032, 計畫編號： NSC-88-2212-E007-006.

王偉中 , 趙皇麟 , 1998.12, “ 共軛凸輪接觸應力之光彈分析 ”, 第二十二屆中華民國力學會議論文集 , pp.53~60, 計畫編號： NSC-86-2212-E007-027

王偉中 , 陳見華 ,1998.12, “ 含裂縫複材板修補後動態特性之探討 ” 第二十二屆中華民國力學會議論文集 , pp.13~20, 計畫編號： NSC-86-2732-E007-01, NSC-86-2212-E007-001, ESC-87-2212-E007-032.

王偉中 , 石煇堅 , 1998.11, “PC 耐力板破裂行為之實驗探討 ”, 第十五屆全國機械工程學術研討會論文集 , pp.835~840.

Wang, W. C. and C. B. Cheng, 1998. 08 "Investigation of Vibration Characteristics of Printed Circuit Boards", Proceedings of the 11th International Conference on Experimental Mechanics, pp.969-974, Oxford, United Kingdom, August 24-28, 計畫編號： NSC-83-0404-E007 -076 , NSC-84-2212-E007 -031.

Wang, W. C. and Y.H. Tsai, 1998. 06 "Vibration Analysis of the Shadow Mask by ESPI", Proceedings of the 1998 SEM Spring Conference on Experimental and Applied Mechanics, pp.139-142, Houston, Texas, U.S.A, June 1-3, 計畫編號： NSC-82-0618-E007 -323 , NSC-84-2212-E007 -062 , NSC-86-2732-E007 -001.

王偉中 , 徐炯勛 , 1998. 05 " 以複合材料補片修補含裂縫鋁合金平板之動態效應分析 ", 中華民國第六屆振動與噪音學術研討會論文集 , pp.111-121, 計畫編號： NSC-85-2212-E007-042 , NSC-82-0401-E007 -323.

王偉中 , 王明忠 , 梁希賢 ,1997.12, " 轉動凸輪接觸應力之光彈實驗分析 ", 第十四屆全國機械工程學術研討會論文集 , pp.315-322, 計畫編號： NSC-84-2212-E007-078, NSC-85-2212-E007-044

Wang, W. C. and G. H. Lin, 1997.07, "Investigation of Vibration Characteristics of Patched Composite Plates", Proceedings of the International Conference on Advanced Technology in Experimental Mechanics, pp.209-214, Wakayama, Japan, July 25-26. (Invited Paper) 計畫編號： NSC-82-0618-E007-323, 計畫編號： NSC-84-2212-E007-062, 計畫編號： NSC-86-2212-E007-001

Wang, W. C. and C. H. Hsu, 1997. 06, "Experimental Evaluation of Bolted Composite Patching", Proceedings of the 1997 SEM Spring Conference on Experimental and Applied Mechanics, pp.148-149, Bellevue , Washington , U.S.A. ,June 2-4. 計畫編號： NSC-85-0210-D007-007

Wang, M. J., W. C. Wang and Y. M. Chen, 1997. 06, "A Caustic Study on Contact Problem of Rotating Cams", Proceedings of the 1997 SEM Spring Conference on Experimental and Applied Mechanics, pp.285-286, Bellevue , Washington , U.S.A. , June 2-4. 計畫編號： NSC-82-0115-C-159-507-E, 計畫編號： NSC-83-0117-C-159- 010, 計畫編號： NSC-84-2212-E007-078

王偉中 , 蔡英煌 ,1997.05, " 四邊固定平板之實驗分析及應用 ", 中華民國振動與噪音工程學會第五屆學術研討會論文集 , pp.603-612, 計畫編號： NSC-82-0618- E007-323, 計畫編號： NSC-84-2212-E007-062, 計畫編號： NSC-86-2732-E007-001

Wang, W. C. and C. H. Hwang, 1997.05, "Vibration Measurement by Amplitude-Fluctuation ESPI Method", 中華民國振動與噪音工程學會第五屆學術研討會論文集 , pp.227-236, 計畫編號： NSC-82-0401-E007-299, 計畫編號： NSC-82-0618-E007-323, 計畫編號： NSC-83-0401-E007-007, 計畫編號： NSC-84-2212-E007-062, 計畫編號： NSC-85-2212-E007-042

Wang, W. C. and C. H. Hwang, 1997. 04, "Vibration Measurement of An Edge-Cracked Composite Plate by Amplitude Fluctuation ESPI Method", Proceedings of the 9th International Congress on Fracture, pp.2611-2618 Sydney, Australia, April 1-5. 計畫編號： NSC-82-0401-E007-299, 計畫編號： NSC-82-0618-E007-323, 計畫編號： NSC-83-0401-E007-007, 計畫編號： NSC-84-2212-E007-062.

王偉中 , 許志行 , 1996. 12," 含中央裂縫平板螺接修補效益之電子光斑影像干涉術評估 ," 第二十屆全國力學會議論文集 , 412-419 頁。計畫編號： CS-85-0210-D007-007

王偉中 , 林耿輝 , 1996. 11, " 修補後複材平板振動之實驗分析 ", 第十三屆全國機械工程學術研討會論文集 , 456-463 頁。

Wang, W. C., C. H. Hwang and S. Y. Lin, 1996. 07, "Modal Analysis of Composite Plates Containing Circular Defects", Proceedings of Asian Pacific Conference for Fracture and Strength '96, pp. 825-830, Kyongju , Korea , July 23-26, 1996 . 計畫編號： NSC-82-0401-E007-299, 計畫編號： NSC-82-0618-E007-323, 計畫編號： NSC-83-0401-E007-007

Wang, W. C. and C. H. Day, 1996. 06, "Hybrid Evaluation of Repair Efficiency of Composite Patching", Proceedings of the VIII International Congress on Experimental Mechanics, pp. 174-175, Nashville, Tennessee, U.S.A., June 10-13, 計畫編號： NSC-83-0404-D007 -005, 計畫編號： CS-84-0210-D007-002

Wang, W. C., S. Y. Lin and C. H. Hwang, 1996. 06, "Vibration Measurement of Composite Plates Containing a Circular Defect by ESPI", Proceedings of the VIII International Congress on Experimental Mechanics, pp. 327-328, Nashville, Tennessee, U.S.A., June 10-13, 計畫編號： NSC-82-0401-E007-299, 計畫編號： NSC-82-0618-E007-323, 計畫編號： NSC-83-0401-E007-007, 計畫編號： NSC-84-2212-E007-062

Wang, W. C., C. H. Hwang and S. Y. Lin 1996. 06, "Vibration Measurement of Composite Plates Containing Defect at Different Depths by Amplitude Fluctuation ESPI Method", Proceedings of the VIII International Congress on Experimental Mechanics, pp. 329-330, Nashville, Tennessee, U.S.A., June 10-13, 計畫編號： NSC-82-0401-E007-299, 計畫編號： NSC-82-0618-E007-323, 計畫編號： NSC-83-0401-E007-007, 計畫編號： NSC-84-2212-E007-062

Wang, M. C., W. C. Wang and Y. M. Chen, 1996. 06, "The Experimental Analysis of Kinematics and Contact Stresses of Double-Dwell Cams", Proceedings of the VIII International Congress on Experimental Mechanics, pp.331-332, Nashville, Tennessee, U.S.A., June 10-13, 計畫編號： NSC-82-0115-C-159 -507-E, 計畫編號： NSC-84-2212-E007-078

王偉中 , 邱燦賓 , 1996. 04, " 破裂問題之電子光斑影像干涉術研究 ", 中華民國第四屆破壞科學研討會論文集 , 463-469 頁 , 計畫編號： NSC-80-0401-E007-22, 計畫編號： NSC-81-0401-E007-566, 計畫編號： NSC-83-0404-D007-005

Wang, W. C. and R. H. Hwu, 1995. 12, "Scattered-Light Photoelastic Analysis of Contact Stress of a Variable Pitch Lead Screw", Proceedings of the Eighth Asia-Pacific Conference on Nondestructive Testing, pp. 189-195, Taipei, Taiwan, Dec.11-14.

Wang, W. C. and C. H. Hwang, 1995. 11, "On Vibration of Composite Plates by Time-Averaged ESPI Technique", Proceedings of the International Symposium on Advanced Technology in Experimental Mechanics, pp.329-334, Tokyo, Japan, Nov. 9-10., 計畫編號： NSC-82-0401-E007-299, 計畫編號： NSC-82-0618-E-007-323, 計畫編號： NSC-83-0401-E007-007, 計畫編號： NSC-84-2212-E007-062.

Wang, M. J. and W. C. Wang, 1995. 11, "Photoelastic Investigation of Contact Stresses of Rotating Cams”, Proceedings of the International Symposium on Advanced Technology in Experimental Mechanics, pp. 43-48, Tokyo, Japan, Nov. 9-10., 計畫編號： NSC-82-0115-C-159-507-E.

王偉中 , 林淑瑜 , 黃吉宏 , 1995. 11, " 含圓孔複合材料層板之模態測試 ", 第十二屆全國機械工程學術研討會論文集 , 287-294 頁 , 計畫編號： NSC-82-0401-E007-299, 計畫編號： NSC-82-0618-E-007-323, 計畫編號： NSC-83-0401-E007-007, 計畫編號： NSC-84-2212-E007-062.

王明忠 , 王偉中 , 陳宇民 , 1995. 11, " 凸輪之運動特性及接觸應力探討 ", 第十九屆全國力學會議論文集 , 321-328 頁 , 計畫編號： NSC-82-0115-C-159-507-E, 計畫編號： NSC-84-2212-E-007-078

Wang, W. C., S. R. Wu and C. W. Chang, 1995. 06, "Investigation of Fracture Behavior of Mortar by the Digital Grid Method", Proceedings of the 1995 SEM Spring Conference in Experimental Mechanics, pp. 291-298, Grand Rapids, Michigan, U. S. A., June 12-14., 計畫編號： NSC-79-0401--E-007-02, 計畫編號： NSC-80-0401-E-007-14.

Wang, W. C., T. B. Chiou and C. H. Day, 1995. 06, "Evaluation of Repair Efficiency of Composite Patchings by ESPI", Proceedings of the 1995 SEM Spring Conference in Experimental Mechanics, pp. 661 -668 ,Grand Rapids, Michigan, U. S. A., June 12-14., 計畫編號： NSC-80-0401-E-007-22, 計畫編號： NSC-80-0204-E-007-22, 計畫編號： NSC-83-0404-D-007-005.

王偉中 , 汪紹華 , 1995. 06," 電子構裝多層結構體之振動分析 ", 第三屆中華民國振動與噪音工程學會學術研討會論文集 , 69-75 頁 , 計畫編號： NSC-83-0404-E-007-076, 計畫編號： NSC-84-2215-E-007-031.

王明忠 , 王偉中 1994. 12," 轉動多項式凸輪接觸應力之探討 ", 第十八屆全國力學會議論文集 , 429-436 頁 , 計畫編號： NSC-82-115-C-159-507-E

王偉中 , 楊勝仲 , 1994. 12," 結合影像相減技術之陰影疊紋法 ", 第十八屆全國力學會議論文集 , 437-444 頁 .

王偉中 , 黃吉宏 , 林淑瑜 , 1994. 12, " 複合材料平板振動之剪切光斑干涉術探討 ", 第十八屆全國力學會議論文集 , 445-452 頁 , 計畫編號： NSC-82-0401-E-007-299, 計畫編號： NSC-82-0618-E-007-323.

王明忠 , 王偉中 , 1994. 12, " 轉動修正梯型凸輪接觸應力之數位光彈探討 ", 第十一屆全國機械工程學術研討會論文集 , 229-238 頁 , 計畫編號： NSC-82-115-C-159-507-E.

王偉中 , 黃吉宏 , 林淑瑜 , 1994. 12, " 複合材料平板振動之電子光斑影像干涉術探討 ", 第十一屆全國機械工程學術研討會論文集 , 239-248 頁 , 計畫編號： NSC-82-0401-E-007-299, 計畫編號： NSC-82-0618-E-007-323.

Wang, M. J. and W. C. Wang, 1994. 07, "Digital Photoelastic Analysis of Contact Stress of a Rotating Cam", Proceeding of International Conference on Advances in Engineering Measurement, pp. 111-118, Edinburgh, United Kingdom, Aug. 30-Sep. 1., 計畫編號： NSC-82-115-C-159-507-E.

W. C. Wang, C. H. Day, S. J. Yang and S. H. Hsu, "Nondestructive Inspection of Defects in Composite Materials by Digital Shadow Moire Method", Proceedings of the 1994 SEM Spring Conference on Experimental Mechanics ., pp. 537-546, Baltimore , Maryland , U. S. A, June 6-8. 計畫編號： NSC-82-F-SP-007-06.

W. C. Wang, 1994. "Digital Photoelastic Analysis of Fracture Behavior in Engineering Components", Proceedings of the JSME Annual Spring Meeting, Tokyo, Japan, March 29-April 4. (Invited Paper) . 計畫編號： NSC-82-0401-E-007-113., 計畫編號： NSC-79-0401-E-007-17.

王偉中 , 許順雄 , 楊勝仲 , 1994. 03, " 應用數位投影雲紋法於複合材料挫曲強度之決定 ", 第二屆太空科技基礎研究研討會論文集 , 368-371 頁 , 計畫編號： 計畫編號： NSC-82-F-SP-007-06.

王明忠 , 王偉中 , 1993. 12, " 轉動凸輪接觸應力之數位光彈探討 ", 第十七屆全國 力學會議論文集 , 631-638 頁 , 計畫編號： NSC-82-115-C-159-507-E

Wang. W. C, and T. L. Chen, 1993.07, "Digital Caustic Determination of Transient Thermal Stress Intensity Factors", Proceedings of the Asian Pacific Conference on Fracture and Strength '93, pp.205-210, Tsuchiura City, Ibaraki, Japan., 計畫編號： NSC-80-0401-E007-14. 計畫編號： NSC-79-0401-E-007-02.

Wang, W. C. and C. H. Day, 1993. 07, "Nondestructive Testing of Composite Materials by ESPI", Proceedings of the Conference on Advanced Technology in Experimental Mechanics, pp.179-184, Kanazawa , Ishikawa , Japan . 計畫編號： NSC- 81-F-SP-007-02, 計畫編號： NSC-80-0401-E-007-566.

Wang, W. C. and S. Y. Chien, 1993. 06, "The Stress Intensity Factors of a Bore Edge Crack in a Rotating Disk", Proceedings of the 1993 SEM Spring Conference on Experimental Mechanics, pp. 776-785, Detroit, Michigan, U. S. A., 計畫編號： NSC-82-0401-E-007-113, 計畫編號： NSC-81-0401-E-007-14.

王偉中 , 許順雄 , 1993. 02, " 應用數位投影雲紋法於複合材料非破壞性檢測 ", 第一屆太空科技基礎研究研討會論文集 , 226-229 頁 , 計畫編號： 計畫編號： NSC-81-F-SP-007-02.

王偉中 , 簡森源 , 1992. 12, " 含週邊圓孔圓盤應力集中因子之數位光彈分析 ", 第十六 屆全國力學會議論文集 , 393-400 頁。 , 計畫編號： NSC-81-0401-E-007 -14

王明忠 , 王偉中 , 1992. 11, "Transient Thermal Stress of a Near-Surface Elliptical Defect in a Semi-Infinite Plate Subjected to a Moving Heat Source", 第九屆全國機械工程學術研討會論文集 , 567-574 頁 , 計畫編號： NSC-78-0114-C-007 -17A.

王偉中 , 段啟光 , 邱長塤 , 張元彬 , 1992. 11, " 近航空構件表面缺陷群暫態熱應力之數位光彈分析 ", 中國航空太空學會第三十四屆學術研討會論文集 , 609-619 頁。計畫編號： CS-81-0210-D007-03.

Wang W. C., C. C. Uang, J. C. Pang and Y. H. Lau, 1992. 09, "Digital Photoelastic Analysis of Stress Distribution in Castable Ceramic Crown with Different Margin Designs", Proceedings of the International Conference on Experimental Mechanics: Technology Transfer Between High Tech Engineering and Biomechanics, pp. 467-476, Limerick , Ireland .

Wang W. C. and C. H. Hwang, 1992. 06, "Notes on Optical Effects in Thermal Caustic Experiments", Proceedings of the 1992 SEM Spring Conference on Experimental Mechanics, pp. 1113-1119, Las Vegas, Nevada, U.S.A., June 8-11., 計畫編號： NSC-80-0401-E-007-14.

Wang W. C. and J. T. Chen, 1992. 03, "Digital Photoelastic Investigation of a Crack Perpendicular to and Terminated at a Bimaterial Interface", 第二屆破壞科學研討會論文集 , 224-232 頁。計畫編號： NSC-79-0401-E-007-17

王偉中 , 戴江漢 , 邱長塤 , 張元彬 , 1991. 12, " 航空構件應力分析之數位反射式光彈分析 ", 第十五屆全國力學會議論文集 , 1509-1514 頁。

Wang, W. C. and J. T. Chen, 1991. 08, "Digital Photoelastic Determination of Stress Intensity Factors for a Crack Arbitrarily Inclined to and Terminated at a Bimaterial Interface", Proceedings of the Joint FEFG/ICF International Conference on Fracture of Engineering Materials, pp. 497-502, Singapore., 計畫編號： NSC-79-0401-E-007 -17

Wang, W. C., T. L. Chen and C. H. Huang, 1991. 07, "Stress Intensity Factors of Edge-Cracked Semi-Infinite Plates Under Transient Thermal Loading", SPIE Proceedings, Vol. 1554A , pp. 124-135, 2nd International Conference on Photomechanics and Speckle Metrology, San Diego, California, U.S.A., 計畫編號： NSC-79-0401-E-007 -02.

Wang, W. C. and J. T. Chen, 1991. 07, "Effects of Material Combinations on the Bimaterial Fracture Behavior", SPIE Proceedings, Vol. 1554A , pp.60-69, 2nd International Conference on Photomechanics and Speckle Metrology, San Diego , U.S.A. , 計畫編號： NSC-77-0401-E-007 -17

Wang, W. C. and W. M. Wu, 1991. 06, "Digital Photoelastic Investigation of Transient Thermal Stresses of Two Interacting Elliptic Defects Due to a Moving Heat Source", Proceedings of the 1991 SEM Spring Conference on Experimental Mechanics, pp. 549-556, Milwaukee, Wisconsin, U.S.A.

王偉中 , 陳燦林 , 黃吉宏 , 李俊興 , 1990. 12, " 應力光學常數之數位光暈法測定 ", 第十四屆全國力學會議論文集 , 1019-1028 頁。 , 計畫編號： NSC-79-0401-E-007 -02

Wang, W. C. and J. T. Chen, 1990. 12, "Singularities at the Tip of a Semi-Infinite Crack Arbitrarily Inclined to and Terminated at the Bimaterial Interface", Proceedings of the Fourteenth National Conference on Theoretical and Applied Mechanics, pp. 279-287, Chung Li, Taiwan, R.O.C., 計畫編號： NSC-77-0401-E-007 -03

王偉中 , 林士雄 , 陳燦林 , 1990. 11, " 交互作用缺陷之暫態熱應力分析 ", 第七屆全國機械工程學術研討會論文集 , 1047-1054 頁。 , 計畫編號： NSC-78-0401-E-007 -06

Wang, W. C., T. L. Chen and S. H. Lin, 1990. 08, "Transient Thermal Stresses of an Internal Elliptic Hole Interacting with a Semi-Circular Surface Defect", Proceedings the 9th International Conference on Experimental Mechanics, pp. 902-911, Lyngby, Copenhagen, Denmark, 計畫編號： NSC-78-0401-E-007 -06

Wang, W. C. and T. L. Chen, 1990. 06, "Digital Photoelastic Analysis of Thermal Stresses of Two Interacting Semi-Elliptic Surface Defects", Proceedings of the 1990 SEM Spring Conference on Experimental Mechanics, pp. 680-687, Albuquerque, New Mexico, U.S.A., 計畫編號： NSC-78-0401-E-007 –06

王偉中 , 1989, “ 含偏心裂縫平板破裂問題之數位光彈法探討 ” , 中國機械工程學會第六屆學術研討會論文集 , 911~920 頁 .

Wang, W. C. and J. H. Day, 1989, “Half-Fringe Birefringent-Coating and Finite Element Analyses of the Fracture Behavior for CFRP Laminates Containing a Central Crack”, 第十三屆全國力學會議論文集 , 445~451 頁 .

Wang, W. C., T. L. Chen and W. M. Wu, 1989, “Digital Photothermoelastic Stress Analysis for a Heat Source Moving Along a Half-Plane Boundary”, 第十三屆全國力學會議論文集 , 607~616 頁 .

王偉中 , 1989, “ 含矩形孔平板於承受面外載荷時之應力集中現象探討 ” , 第十三屆全國力學會議論文集 , 809~818 頁 .

Wang, W. C. and J. T. Chen, 1989, “Photoelastic Analysis of Stress Intensity Factors for Cracks Perpendicular to a Bilateral Interface”, Proceedings of The 3 rd International Conference on Structural Failure, Product Liability and Technical Insurance, Vienna , Austria .

Wang, W. C. and Y. M. Sheu, 1989, “Half-Fringe Birefringent-Coating Analysis of Stresses Around Bolted Joints in CFRP Laminates” , Proceedings of SEM Spring Conference on Experimental Mechanics, pp. 632~639, Cambridge, Massachusetts, U.S.A.

王偉中 , 許永茂 , 1988, “ 機械式結合複合材料接頭應力分佈之半級光彈分析 ” , 中國機械工程學會第五屆學術研討會論文集 , 995~1003 頁 .

Wang, W. C. and J. T. Chen, 1988, “Stress Analysis of Finite Interfacially Cracked Bimaterial Plates by Using Variational Method”, Proceedings of the 5 th National Conference on Mechanical Engineering, pp. 909~1003 頁 .

王偉中 , 陳燦林 , 陳文華 , 1987, “ 應用半級光彈法於含邊緣裂縫平板之破裂參數決定 ”, 第十一屆全國力學會議論文集 , 839~852 頁 .

Wang, W. C. and T. L. Chen, 1987, “Determination of Stress Intensity Factors of Edge-Cracked Plates by Half-Fringe Photoelasticity,” SPIE Proceedings, Vol. 814, pp. 49~57, International Conference on Photomechanics and Speckle Metrology, SPIE's 31 st Annual International Technical Symposium, San Diego, U. S. A.

Wang, W. C., C. Y. Chen and W. H. Chen, 1987, “Half-Fringe Photoelastic Analysis of Rectangular Plates Subjected to Transverse Loading,” SPIE Proceedings, Vol. 814, pp. 41~48, International Conference on Photomechanics and Speckle Metrology, SPIE's 31 st Annual International Technical Symposium, San Diego, U. S. A.

Wang, W. C. and C. P. Burger, 1985, “Stress Intensity Factors for Near-Surface Cracks Under Transient-Thermal Loading,” Presented at the SEM Spring Conference on Experimental Mechanics, Las Vegas , U. S. A.

王偉中, 2012.10, “薄膜電晶体液晶顯示器背光模組不同溫濕工作條件下之平面外位移場檢測暨最佳化分析(III)”, 國科會計畫研究報告，計畫編號：NSC 98-2221-E 007-012-MY3.

王偉中, 2012.10, “TFT-LCD玻璃基板殘留應力與Mura現象之光測力學探討(III)”, 國科會計畫研究報告，計畫編號：NSC 98-2221-E 007-013-MY3.

王偉中,何義傑,沈宏燦,張廷宇, 張雅欣,曹鈞勝,吳亭瑩,陳柏甫, 2011.06,”應用數位影像相關法檢測軟性材料力學行為之簡介”,科儀新知雙月刊, 第三十二卷第六期, pp.4~11,國家實驗研究院儀器科技研究中心出版.

王偉中, 2011.05, “薄膜電晶体液晶顯示器背光模組不同溫濕工作條件下之平面外位移場檢測暨最佳化分析(II)”, 國科會計畫研究報告，計畫編號：NSC 98-2221-E 007-012-MY3.

王偉中, 2011.05, “TFT-LCD玻璃基板殘留應力與Mura現象之光測力學探討(II)”, 國科會計畫研究報告，計畫編號：NSC 98-2221-E 007-013-MY3.

王偉中, 2010.05, “薄膜電晶体液晶顯示器背光模組不同濕工作條件下之平面外位移場檢測暨最佳化分析(I)”, 國科會計畫研究報告，計畫編號：NSC 98-2221-E 007-012-MY3.

王偉中, 2010.05, “TFT-LCD玻璃基板殘留應力與Mura現象之光測力學探討(I)”, 國科會計畫研究報告，計畫編號：NSC 98-2221-E 007-013-MY3.

王偉中, 2009.05, “構件在高頻諧和力作用下之數位動態光粘彈探討(III)”, 國科會計畫研究報告，計畫編號：NSC 95-2221-E 007-011-MY3.

王偉中, 2008.05, “構件在高頻諧和力作用下之數位動態光粘彈探討(II)”, 國科會計畫研究報告，計畫編號：NSC 95-2221-E 007-011-MY3

王偉中 , 2007.06, “ 構件在高頻諧和力作用下之數位 動態 光黏彈探討 (I)”, 國科會計畫研究報告，計畫編號： NSC 95 - 2221 - E 007 -011-MY3.

王偉中 , 2008.01, “ 以混合式數位散射光彈法探討雙層材料之介面應力及熱應力集中 (III)”, 國科會計畫研究報告，計畫編號： NSC 95 - 2221 - E 007 -150.

王偉中 , 2006.06, “ 以混合式數位散射光彈法探討雙層材料之介面應力及熱應力集中 (II)”, 國科會計畫研究報告，計畫編號： NSC 94 - 2212 - E 007 - 016.

王偉中 , 2007.01, “ 應用動態光彈系統探討超音波加工特性及衝擊波之應力行為 (III)”, 國科會計畫研究報告，計畫編號： NSC 94-2212-E007-007

王偉中 , 2005.05, “ 以混合式數位散射光彈法探討雙層材料之介面應力及熱應力集中 (I)”, 國科會計畫研究報告，計畫編號： NSC 93 - 2218 - E 007 - 040

王偉中 , 2005.05, “ 應用動態光彈系統探討超音波加工特性及衝擊波之應力行為 (II)”, 國科會計畫研究報告，計畫編號： NSC 93-2212-E007-013

王偉中 , 2004.05, “ 應用動態光彈系統探討超音波加工特性及衝擊波之應力行為 (I)”, 國科會計畫研究報告，計畫編號： NSC-92-2212-E007-053.

王偉中 , 2003.10, “ 以光測力學方法探討多層材料結構承受熱負載時之力學行為 ”, 計畫編號： NSC 91-2212-E007-034.

王偉中 , 2002.10, " 承受橫向負載楔形平板應力奇異性及振動特性 ", 國科會計畫研究報告。計畫編號： NSC -90-2212-E007-038.

王偉中 , 2002.10, " 以混合法探討彈性支撐含孔構件之動態特性（ III ） ", 國科會計畫研究報告。計畫編號： NSC-90-2212-E007-098.

王偉中 , 2001.08, " 以混合法探討彈性支撐含孔構件之動態特性（ II ） ", 國科會計畫研究報告。計畫編號： NSC-89-2212-E007-108.

王偉中 , 2001.08, " 多種材料熱應力奇異性之探討（ III ） ", 國科會計畫研究報告。計畫編號： NSC-89-2212-E007-104.

王偉中 , 2000.08, " 多種材料熱應力奇異性之探討（ II ） ", 國科會計畫研究報告。計畫編號： NSC-89-2212-E007-011.

王偉中 , 2000.08, " 以混合法探討彈性支撐含孔構件之動態特性（ I ） ", 國科會計畫研究報告。計畫編號： NSC-89-2212-E007-012.

王偉中 , 1999.10, " 多種材料熱應力奇異性之探討（ I ） ", 國科會計畫研究報告。計畫編號： NSC-88-2212-E-007-006

王偉中 , 1999.10, " 週期變動負荷下含缺陷航空構件修補效應之光測力學分析（ III ） ", 國科會計畫研究報告。計畫編號： NSC-87-2212-E-007-006

王偉中 , 1999.05, "PCB 裂片應力量測 ", 國碁電子股份有限公司委託研究報告。

王偉中 , 1998.07, " 週期變動負荷下含缺陷航空構件修補效應之光測力學分析（ II ） ", 國科會計畫研究報告。計畫編號： NSC-87-2212-E-007-032

王偉中 , 1998.06, "PC 板破裂行為之研究 ", 台灣水泥化學工業股份有限公司委託研究報告。

王偉中 , 1998.06, "Thin Film on Laminated Plate 應力特性之研究 ", 工業技術研究院電子工業研究所委託研究報告。計畫編號： 0387-B2029.

王偉中 , 俞明賢 , 1998.06, " 安全氣囊零組件檢測能量之評估與探討 ", 中山科學研究院委託研究報告。

王偉中 , 1998.01, " 週期變動負荷下含缺陷航空構件修補效應之光測力學分析（ I ） ", 國科會計畫研究報告。計畫編號： NSC-86-2212-E-007-001.

王偉中 , 1998.01, " 轉動凸輪接觸應力之實驗分析 (III)", 國科會計畫研究報告。 計畫編號： NSC-86-2212-E-007-044.

王偉中 , 1996.12, " 轉動凸輪接觸應力之實驗分析 (II)", 國科會計畫研究報告。計畫編號： NSC-85-2212-E-007-044.

王偉中 , 1996.08, " 以電子影像光斑干涉術探討含缺陷航空構件之修補效應 (III)," 國防科技學術合作推動小組計畫研究報告。計畫編號： CS-85-0210-D-007-07.

王偉中 , 1996.08, " 週期變動負荷下複合材料平板應力場之光測力學分析 (III)" 國科會計畫研究報告。計畫編號： NSC-83-0401-E-007-007 ，計畫編號： NSC-84-2212-E-007-062 ，計畫編號： NSC-85-2212-E-007-042.

王偉中 , 1996.05, " 汽車安全氣囊系統產品責任及安全規範之研究 ", 中山科學研究院委託研究報告 .

尹士豪 , 翁通楹 , 王偉中 , 谷家恆 , 1996.05, “ 全國大學院校機械學門之評鑑 ”, 教育研究資訊雙月刊 , 等四卷第三期 , pp. 54~69.

王偉中 , 1996.02, “ 光測力學方法及應用實例概述 ”, 科儀新知雙月刊 , 第十七卷第四期 , pp.57~72, 行政院國家科學委員會精密儀器中心出版 .

王偉中 , 1995.10, " 轉動凸輪接觸應力之實驗分析 (I)", 國科會計畫研究報告。計畫編號： NSC-84-2212-E-007-078.

王偉中 , 1995.10, " 以電子影像光斑干涉術探討含缺陷航空構件之修補效應 (II)," 國防科技學術合作推動小組計畫研究報告。計畫編號： CS-84-0210-D-007-002.

王偉中 , 1995.09, " 週期變動負荷下複合材料平板應力場之光測力學分析 (II)" 國科會計畫研究報告。計畫編號： NSC-83-0401-E-007-007 ，計畫編號： NSC-84-2212-E-007-062.

王偉中 , 1995.09, " 數位陰影疊紋法在電子構裝多層結構振動分析之應用 " 國科會計畫研究報告。計畫編號： NSC-83-0404-E-007-076 ，計畫編號： NSC-84-2212-E-007-031.

王偉中 , 1995,08, " 擴散技術換回企業出走的心 " ，透視臺灣的技術研究， pp. 123-144, 經濟部技術處 .

王偉中 , 1995.04, " 承受複合載荷含鏜孔邊緣或近鏜孔邊緣裂縫旋轉圓盤之數位光彈分析 " 國科會計畫研究報告。計畫編號： NSC-83-0401-E-007-035.

王偉中 , 1994.09, " 以電子影像光斑干涉術探討含缺陷航空構件之修補效應 (I)," 國防科技學術合作推動小組計畫研究報告。計畫編號： NSC-83-0404-D-007-005.

王偉中 , 1994,07, " 共用引擎建立我國汽車工業自主性 " ，透視臺灣的技術研發， pp. 55-57, 經濟部技術處。

王偉中 , 1994.07, " 週期變動負荷下複合材料平板應力場之光測力學分析 (I)" 國科會計畫研究報告。計畫編號： NSC-82-0401-E-007-299.

王偉中 , 1994.07, " 承受複合載荷含鏜孔邊緣裂縫旋轉圓盤之數位光彈分析 ," 國科會計畫研究報告。計畫編號： NSC-83-0401-E-007-035.

王偉中 , 葉銘泉 , 1993.06, " 大客車車體結構之安全性研究 ", 車輛研究測試中心計畫 ARTC-101-Q303(82) 研究報告。

王偉中 , 1994.06, " 複合材料之檢測與應力分析 ( 第一年度後續計畫 )", 國科會計畫研究報告。 計畫編號： NSC-82-F-SP-007-06 。

王偉中 , 1993.01, " 複合材料非破壞性檢測及修補之影像光斑探討 (I)", 國科會計畫研究報告。 計畫編號： NSC-80-0401-E007-566.

王偉中 , 1993.01, " 複合材料之檢測與應力分析 ", 國科會太空科技研究計畫研究報告。計畫編號： NSC-81-F-SP-007-02

王偉中 , 1994.01, " 複合材料非破壞性檢測及修補之影像光斑探討 (II)", 國科會計畫研究報告。計畫編號： NSC-81-0401-E007-566.

王偉中 , 1992.07, " 旋轉圓盤應力之數位光彈分析 (I)", 國科會計畫研究報告。計畫編號： NSC-81-0401-E007-14

王偉中 , 1992.07, " 航空構件應力之數位光彈分析 (II)", 中山科學研究院計畫 CS-79-0210-D007-09 研究報告。

王偉中 , 1992.07, " 旋轉圓盤應力之數位光彈分析 (II)", 國科會計畫研究報告。計畫編號： NSC-82-0401-E007-113 。

王偉中 , 葉銘泉 , 1992.06, " 大客車打造技術之調查 ", 車輛研究測試中心計畫 ER413 研究報告 。

王偉中 , 1992.06, " 開發光彈、光斑與格子法之影像處理軟體 ", 工業技術研究院工業材料研究所委託研究報告。計畫編號： 3642200-1-NTHU.

王偉中 , 1992.03, " 機車自行車複合材料製零組件調查 ", 經濟部工業局協助國內傳統工業技術昇級計畫。

王偉中 , 1991.07, " 暫態熱破裂問題之數位光暈探討 (II)", 國科會計畫研究報告。計畫編號： NSC-80-0401-E007-14 。

王偉中 , 1991.06, " 在不同邊緣設計可鑄造陶瓷牙冠中應力分佈之數位光彈分 析 , 榮總清大合作小組研究計畫 VGHTH 80-006-2 研究報告。

王偉中 , 1991.01, " 裂縫以任意傾角相交且終止於雙重材料界面之理論與實驗分 析 ", 國科會計畫研究報告。計畫編號： NSC-79-0401-E007-17 。

王偉中 , 王明忠 , 1990.12, " 承受移動熱源含近邊界橢圓孔缺陷半無窮平板之熱應力分析 ", 國科會短期科技研究計畫研究報告。計畫編號： NSC-78-0114-C007-17A 。

王偉中 , 簡森源 , 1990.10, " 含邊緣 V 型凹槽平板於承受面外彎矩時之應力奇異性探討 ", 國科會大學生暑期參與專題研究計畫成果報告。

劉通敏 , 王偉中 , 1990.10, " 固體火箭發動機燒蝕燃燒之研究 (II)", 中山科學研究院計畫 CS-78-0210-D007-32 研究報告。

王偉中 , 1990.10, " 航空構件應力之數位光彈分析 (I)", 中山科學研究院計畫 :CS-79-0210-D007-09 研究報告。

王偉中 , 1990.07, " 暫態熱破裂問題之數位光暈探討 (I)", 國科會計畫研究報告。計畫編號： NSC-79-0401-E007-02 。

劉大佼 , 王偉中 , 1990.06, " 射出成型加工條件對熱塑性物品殘餘應力分佈之影響 ", 中山科學研究院計畫 CS-78-0210-D007-31 研究報告。

王偉中 , 1989.07, “ 近邊界缺陷暫態熱應力之光彈分析 ”, 國科會計畫 :NSC-78-0401-E007-06 研究報告。

王偉中 , 1989.06, “ 熱光彈分析焊接應力之可行性研究 ”, 金屬工業發展中心研究報告。

劉通敏 , 王偉中 , 1988.11, “ 固體火箭發動機燒蝕燃燒之研究 ”, 中山科學研究院計畫 :CS77-0210-D007-11 研究報告。

王偉中 , 1988.09, “CFRP 破裂問題之光彈分析 ”, 工研院工材所計畫 :31A3200-02-NTHU 研究報告。

Wang, W. C., 1988.07, “Photoelasticity Principles”, Notes Prepared for the Short Course of Advanced Photomechanics, Hsinchu , Taiwan .

王偉中 , 1988.07, “ 與雙重材料介面交互作用裂縫應力強度因子之光彈分析 ”, 國科會計畫 :NSC-77-0401-E007-03 研究報告。

蕭德瑛 , 陳永昌 , 王偉中 , 1987.06, “ 結合影像掃描器與 CNC 火焰切割機之應用研究 ”, 全友自動化公司計畫研究報告。

王偉中 , 1987.06, “ 應用半級光彈法於機械式結合複合材料接頭之設計 ”, 工研院工材所計畫 :30A2210-02-NTHU 研究報告。

Wang, W. C., 1987.01, “Notes on the Calculation of the Discontinuity Stresses in Pressure Vessel Code Section VIII, Division 2”, Notes Prepared for the Short Course for the Committee of Labor Affairs, Taichung.

王偉中 , 陳文華 , 1986.03, “ 應用半級光彈法於破裂力學之研究 ”, 國科會計畫 :NSC-75-0401-E007-11 研究報告。

王偉中 , 葉銘泉 , 陳文華 , 1986.03, “ 破裂參數量測技術之探討 ”, 量測技術研討會論文集 , 1-35 頁 , 清華大學。

Wang, W. C., 1985.08, “Transient Thermal Stress Intensity Factors of Near Surface Cracks”, Ph. D. Dissertation, Iowa State University, Ames, Iowa, U. S. A.

Wang, W. C., 1981.08, “Combined Free and Forced Convection Mass Transfer from a Cylindrical Cavity”, M. S. Thesis, Texas Tech University , Lubbock , Texas , U. S. A.