Publications & Awards

Publications

International Journal-SCI

Corresponding Author *

  1. Cheng-Jung Yang*; Lin Mei Jyun; Jahau Lewis Chen, “Multi-disciplinary optimization approach to eco-friendly de-sign using response surface method,” Applied Sciences, Vol 12, No. 6, 2022.

  2. K. David Huang; Zhong-Ting Cao; Jyun-Ming Jhang; Cheng-Jung Yang*; Po-Tuan Chen*, “Parameter Improvement of Composite Sinusoidal Waveform Charging Strategy for Reviving Lithium-ion Batteries Capacity”, accepted by Journal of the Chinese Society of Mechanical Engineers in 23 February 2022.

  3. Cheng-Jung Yang*, “Accelerated Quality Improvement of 3D Printed Objects based on a Case-Based Reasoning System,” The International Journal of Advanced Manufacturing Technology, Vol. 119, pp. 4599-4612, 2022.

  4. Thangavel Sangeetha; Wei Mon-Yan; Yi-Shiuan Wu; Chun-Chen Yang; Po-Tuan Chen*; Cheng-Jung Yang*, “Suppressing Anodic Degradation of Lithium-ion Batteries by Sinusoidal Waveform Charging Method”, early access article in IEEE Access in June 12, 2021.

  5. Nguyen Minh Khoa, Thangavel Sangeetha, Po-Tuan Chen, Ting-Wei Hsu, Wei-Mon Yan, Cheng-Jung Yang* and K. David Huang, “High performance zinc–air fuel cell with zinc particle fuel and flowing electrolyte”, Journal of the Chinese Institute of Engineers, Vol 44, No. 8, 2021.

  6. K. David Huang; Cheng-Jung Yang*; Po-Tuan Chen, “Fluidity and Penetration Efficiency of Zn Particles on the Electrochemical Reactions of Zn-Air Fuel cells”, Journal of the Chinese Institute of Engineers, Vol 44, No. 3, 2021.

  7. Cheng-Jung Yang; Ming-Huang Chen; Keng-Pei Lin*; Yu-Jie Cheng; Fu-Chi Cheng, “Importing Automated Management System to Improve the Process Efficiency of Dental Laboratories”, Sensors, Vol 20, No. 20, 2020.

  8. Po-Tuan Chen; Cheng-Jung Yang*; K. David Huang*, “Development of Energy Control System for Parallel Hybrid Power System using Dynamic Equations and Fuzzy Theory”, Advances in Mechanical Engineering, Vol 12, No. 11, 2020.

  9. Thangavel Sangeetha; Wei-Mon Yan; Po-Tuan Chen*; Cheng-Jung Yang*; K. David Huang*, “Protection Efficiencies of Surface-Active Inhibitors in Zn-Air Batteries”, International Journal of Energy Research, Vol. 44, No. 14, pp. 11883-11893, 2020.

  10. Po-Tuan Chen; Cheng-Jung Yang*; K. David Huang*, “Dynamic Simulation and Control of a new Parallel Hybrid Power System”, Applied Sciences, Vol 10, No. 16, 2020.

  11. Thangavel Sangeetha; Wei-Mon Yan; Po-Tuan Chen; Cheng-Jung Yang*; K. David Huang*, “Electrochemical polarization analysis for optimization of external operation parameters in zinc fuel cells”, RSC Advances, Vol.10, pp. 28807-28818, 2020.

  12. Chia-Hung Chou; Po-Tuan Chen; Cheng-Jung Yang*; K. David Huang*, “Functionalization of Wireless Control and Fuzzy Systems to Hybrid Mini-Loaders”, IEEE Access, Vol. 8, No. 1, pp. 80914-80921, 2020.

  13. Thangavel Sangeetha†; Cheng-Jung Yang†; Po-Tuan Chen†; Wei-Mon Yan*; K. David Huang*, “Discharge performance of Zn-air fuel cells under the influence of Carbopol 940 thickener”, International Journal of Energy Research, Vol. 44, No. 6, pp. 4543-4555, 2020. †These authors contributed equally to this work.

  14. Cheng-Jung Yang; Po-Tuan Chen*; K. David Huang*, “The optimization of electrolyte flow management to increase the performance of Zn–air fuel cells”, International Journal of Energy Research, Vol. 44, No. 6, pp. 4224-4234, 2020.

  15. Po-Tuan Chen; Fu-Yen Zeng; Xuan-Hao Zhang; Ren-Jei Chung; Cheng-Jung Yang*; K. David Huang*, “Composite Sinusoidal Waveform Generated by Direct Digital Synthesis for Healthy Charging Lithium-ion Batteries”, Energies, Vol 13, No. 4, 2020.

  16. Po-Tuan Chen; Pei-Fan Ding; Cheng-Jung Yang*; K. David Huang*, “Hybrid Power System Design for Multifunctional Mini-Loader Vehicles”, Applied Sciences, Vol 9, No. 20, 2019.

  17. Cheng-Jung Yang; Tzu-Chun Yang; Po-Tuan Chen*; K. David Huang*, “An innovative design of regional air-conditioning to increase automobile cabin energy efficiency”, Energies, Vol 12, No. 12, 2019.

  18. Po-Tuan Chen; Duong Dinh Nghia; Cheng-Jung Yang*; K. David Huang*, “Study of system integral energy efficiency of a hybrid pneumatic power system”, Applied Sciences, Vol 9, No. 11, 2019.

  19. Yu-Sheng Lin; Cheng-Jung Yang*, “Spring Assisting Mechanism for Enhancing the Separation Performance of Digital Light Process 3D Printers”, IEEE Access, Vol. 7, No. 1, pp. 71718-71729, 2019.

  20. Po-Tuan Chen; Thangavel Sangeetha; Ting-Wei Hsue; Cheng-Jung Yang; Tung-Yuan Yung; Wei-Mon Yan*; K.David Huang*, “Improved performance of a Zn-air fuel cell by coupling Zn particle fuel and flowing electrolyte”, Chemical Physics Letters, Vol. 728, pp.160-166, 2019.

  21. Po-Tuan Chen; Da-Jyun Shen; Cheng-Jung Yang*; K. David Huang*, “Development of a Hybrid Electric Motorcycle that Accords Energy Efficiency and Controllability via an Inverse Differential Gear and Power Mode Switching Control”, Applied Sciences, Vol 9, No. 9, 2019.

  22. Po-Tuan Chen; Ping-Hao Pai; Cheng-Jung Yang*; K. David Huang*, “Development of Transmission Systems for Parallel Hybrid Electric Vehicles”, Applied Sciences, Vol 9, No. 8, 2019.

  23. Cheng Jung Yang; Jahau Lewis Chen*, “Forecasting the Design of Eco-Products by Integrating TRIZ Evolution Patterns with CBR and Simple LCA Methods,” Expert Systems with Applications, Vol.39, No. 3 pp. 2884-2892, 2012.

  24. Cheng Jung Yang; Jahau Lewis Chen*, “Energy-saving Eco-innovation Using Eco-product Cases with CBR and TRIZ Tools,” Journal of the Chinese Society of Mechanical Engineers, Vol.33, No.4, pp.305-313, 2012.

  25. Cheng Jung Yang*; Jahau Lewis Chen, “Accelerating Preliminary Eco-innovation Design for Products that Integrates Case-Based Reasoning and TRIZ method,” Journal of Cleaner Production, Vol.19, No. 9-10, pp. 998-1006, 2011.

International Journal-Non SCI

Corresponding Author *

  1. Tung-Yuan Yung; Thangavel Sangeeth; Wei-Mon Yan; Cheng-Jung Yang*; Po-Tuan Chen*, “Non-precious and accessible nanocomposite of iron oxide on PDDA-Modified graphene for catalyzing oxygen reduction reaction,” Journal of Power Sources Advances, Vol 5, 2020.

  2. Cheng-Jung Yang*; Ci-Hao Wang; Ying-Chieh Lee; Meng-Hao Tsai, “Recycled Plastic Composite Rod-based Design of Fasteners in the Simplified Greenhouse”, International Journal of Materials, Mechanics and Manufacturing (IJMMM), Vol. 7, No. 5, pp. 210-213, 2019. (IET Inspec, EI)

  3. Cheng-Jung Yang*; Yu-Sheng Lin; Guan-Lin Chen; Qi-Jun Xiao, “Predicting the separation time of semi-passive mechanism in DLP machine by CBR method”, Journal of Automation and Control Engineering (JOACE), Vol. 7, No. 1, pp.63-67, 2019.

  4. Yu-Jie Cheng; Ming-Huang Chen; Fu-Chi Cheng; Yu-Chi Cheng; Yu-Sheng Lin; Cheng-Jung Yang*, “Developing a Decision Support System (DSS) for a Dental Manufacturing Production Line based on Data Mining”, Applied System Innovation(ASI), Vol. 1, No. 17, 2018.

  5. Cheng-Jung Yang*, “Utilizing CBR Method in Parameter Planning for FDM process of 3D printing,” International Journal of Engineering and Innovative Technology (IJEIT), Vol. 7, No. 9, 2018.

  6. Yu-Sheng Lin; Cheng-Jung Yang*, “Design and Fabrication of a Self-adjusted Mechanism in Combination with Passive Peeling for Effective Separation used in Digital Light Processing (DLP) 3D printing,” International Journal of Mechanical And Production Engineering (IRAJ), Vol.5, No.3, pp.10-14, 2017.

Domestic Journal

Corresponding Author *

  1. 林盈兆、張育堯、楊政融*， “利用田口方法建構下照式光固化三維列印機台最小分離力參數”，精密機械與製造科技期刊，第8卷，第2期，18-27頁，2018。

International Conference Paper

Corresponding Author *

  1. Mark Mennenga; Christopher Rogall*; Cheng-Jung Yang; Johannes Wölper; Christoph Herrmann; Sebastian Thiede; “Architecture and development approach for integrated Cyber-Physical Production-Service Systems (CPPSS)”, Procedia CIRP, Vol. 90, pp. 742-747, 2020. (Germany-Taiwan Cooperation)

  2. Yu-Jie Cheng; Shing-Jye Chen; Yu-Sheng Lin; Cheng-Jung Yang*, “A 2D Dental Morphological Image Augmented to Assist Improving Traditional Hand Carving Skills in Dentistry”, Educational Innovations and Applications- Tijus, Meen, Chang, pp.29-32, 2019. (EI Compendex)

  3. Cheng-Jung Yang*; Shing-Jye Chen; Ru-Mei Hsieh, “To improve learning effect in mechanical component design by 3D printing—Assistive device design as an example”, Educational Innovations and Applications- Tijus, Meen, Chang, pp.263-266, 2019. (EI Compendex)

  4. Yu-Sheng Lin; Ying-Zhao Lin; Yu-Yao Zhang; Cheng-Jung Yang*, “Simulating an Intelligent Printing Control for a Digital Light Processing (DLP) 3D Printer,” IEEE-ICASI 2018 - Lam, Meen & Prior (Eds), pp.638-641, 2018. (EI Compendex)

  5. Yu-Jie Cheng; Ming-Huang Chen; Fu-Chi Cheng; Keng-Pei Lin; Cheng-Jung Yang*, “Enhance the processing and management efficiency of Dental Laboratory by the strategy of Productivity 4.0,” IEEE-ICASI 2017 - Meen, Prior & Lam (Eds), pp.1098-1101, 2017. (EI Compendex)

  6. Yu-Sheng Lin; Ming-Huang Chen; Cheng-Jung Yang*, “A simultaneously sensing system to improve efficiency of Digital Light Process Printing,” IEEE-ICASI 2017 - Meen, Prior & Lam (Eds), pp.1379-1382, 2017. (EI Compendex)

  7. Cheng-Jung Yang*; Yi-Hong Lin; Shao-Yu Peng, “Develop a video monitoring system for dairy estrus detection at night,” IEEE-ICASI 2017 - Meen, Prior & Lam (Eds), pp.1900-1903, 2017. (EI Compendex)

International Conference Presentation

Corresponding Author *

  1. Po-Tuan Chen; Cheng-Jung Yang*; K. David Huang, “Using Electrochemical Polarization Analysis to Optimize the External Operation Parameters of Zinc Fuel Cells”, International Conference on Sustainable Energy and Green Technology 2019 (SEGT 2019), Bangkok, Thailand, Dec. 11-14, 2019.

  2. Cheng-Jung Yang*; Ci-Hao Wang; Ying-Chieh Lee; Meng-Hao Tsai, “Recycled Plastic Composite Rod-based Design of Fasteners in the Simplified Greenhouse”, The 5th International Conference on Mechanical Design and Engineering (ICMDE 2019), Osaka, Japan, Mar. 16-19, 2019.

  3. Cheng-Jung Yang*; Yu-Sheng Lin; Guan-Lin Chen; Qi-Jun Xiao, “Predicting the separation time of semi-passive mechanism in DLP machine by CBR method”, 2nd International Conference on Mechatronics, Control and Robotics, Fukuoka, Japan, Feb. 23-25, 2019.

  4. Cheng-Jung Yang*; Shing-Jye Chen; Ru-Mei Hsieh, “To improve learning effect in mechanical component design by 3D printing—Assistive device design as an example”, 2nd Eurasian Conference on Educational Innovation, Singapore, January 27-29, 2019. (Best Conference Paper Award)

  5. Yu-Jie Cheng; Shing-Jye Chen; Yu-Sheng Lin; Cheng-Jung Yang*, “A 2D Dental Morphological Image Augmented to Assist Improving Traditional Hand Carving Skills in Dentistry”, 2nd Eurasian Conference on Educational Innovation, Singapore, January 27-29, 2019.

  6. Yu-Sheng Lin; Pu-Chun Mo; Cheng-Jung Yang; Li-Chieh Kuo; “Machine Learning Adaptive Separation in the Process of Digital Light Process (DLP) Printing,” 1st International Conference PROBLEMS OF MECHANICS AND CONTROL, Makhachkala, Respunlika Dagestan, September 16-23, 2018.

  7. Yu-Jie Cheng; Fu-Chi Cheng; Yu-Sheng Lin; Cheng-Jung Yang*, “Developing a Decision Support System (DSS) for a Dental Manufacturing Production Line based on Data Mining,” 2018 IEEE International Conference on Applied System Innovation, Chiba, Tokyo, Japan, April 13-17, 2018. (Best Conference Paper Award)

  8. Yu-Sheng Lin; Ying-Zhao Lin; Yu-Yao Zhang; Cheng-Jung Yang*, “Simulating an Intelligent Printing Control for a Digital Light Processing (DLP) 3D Printer,” 2018 IEEE International Conference on Applied System Innovation, Chiba, Tokyo, Japan, April 13-17, 2018. (Best Conference Paper Award)

  9. Cheng-Jung Yang*, “Utilizing CBR Method in Parameter Planning for FDM process of 3D printing,” Asian Conference on Engineering and Natural Sciences, Osaka, Japan, Feb. 6-8, 2018.

  10. Cheng-Jung Yang*; Yu-Hsun Lai, “Life cycle assessment in fused deposition modeling (FDM) 3D printer,” Going Green EcoDesign 2017:10th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tainan, Taiwan, Nov. 11- Dec. 1, 2017.

  11. Yu-Jie Cheng; Ming-Huang Chen; Fu-Chi Cheng; Keng-Pei Lin; Cheng-Jung Yang*, “Enhance the processing and management efficiency of Dental Laboratory by the strategy of Productivity 4.0,” 2017 IEEE International Conference on Applied System Innovation, Sapporo, Japan, May 13-17, 2017.(First Prize Paper Award)

  12. Cheng-Jung Yang*; Yi-Hong Lin; Shao-Yu Peng, “Develop a video monitoring system for dairy estrus detection at night,” 2017 IEEE International Conference on Applied System Innovation, Sapporo, Japan, May 13-17, 2017. (Best Conference Paper Award)

  13. Yu-Sheng Lin; Ming-Huang Chen; Cheng-Jung Yang*, “A simultaneously sensing system to improve efficiency of Digital Light Process Printing,” 2017 IEEE International Conference on Applied System Innovation, Sapporo, Japan, May 13-17, 2017. (First Prize Paper Award)

  14. Yu-Sheng Lin; Cheng-Jung Yang*, “Design and Fabrication of a Self-adjusted Mechanism in Combination with Passive Peeling for Effective Separation used in Digital Light Processing (DLP) 3D printing,” 126th International Conference on Recent Innovation in Engineering and Technology (ICRIET),Seoul, South Korea, January 18-19, pp.43-47, 2017. (ISERD Excellent Paper Award)

  15. Cheng-Jung Yang*; Ming-Huang Chen; Sheng-Chi Lin; Yu-Ting Wu; Yi-Chun Liao; Shao-Yu Peng, “A New Development System for Automated Measurement and Recording pig weight,” The 17th Asian-Australasian Association of Animal Production Societies Animal Science Congress, Fukuoka, Japan, August 22-25, 2016.

  16. Rong-Fu, Kuo; Cheng-Jung Yang*; Zhi-Sheng, Lin, “Risk Management of the New One Piece Dental Implant,” 3rd International Conference on Future Bioengineering, Kuala Lumpur, Malaysia, December 13-14, 2014.

  17. Shing-Jye Chen; Cheng-Jung Yang*, “A home-made biomechanical staircase where handrail and ground reaction forces can be registered during stair ascent and descent,” 1st International Bioengineering Conference (BIOENG’14), Istanbul, Turkey, November 27-29, 2014.

  18. Rong-Fu, Kuo; Cheng-Jung Yang*; Zhi-Sheng, Lin, “One piece dental implant development,” 1st Global Conference on Biomedical Engineering - 9th Asian Pacific Conference on Medical and Biological Engineering, Tainan, Taiwan, October 9-12, 2014.

  19. Rong-Fu, Kuo; Cheng-Jung Yang*; Ruey-Mo, Lin; Chen-Hsun, Weng, “Risk analysis of the new dynamic spinal stabilization system,” 1st Global Conference on Biomedical Engineering - 9th Asian Pacific Conference on Medical and Biological Engineering, Tainan, Taiwan, October 9-12, 2014.

  20. Cheng-Jung Yang*; Jahau Lewis Chen, “Reasoning New Eco-Products by Integrating TRIZ with CBR and Simple LCA Methods,” Glocalized Solutions for Sustainability in Manufacturing: Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, Jurgen Hesselbach and Christoph Herrmann, Springer, pp.107-112, TU-Braunschweig, Germany, May 2-4, 2011.

  21. Julian Stehr; Cheng-Jung Yang; Jahau Lewis Chen; Christoph Herrmann, “ A Cladistic and TRIZ-based Approach for Enhancing Decision Making in Technology and Innovation Management,“17th CIRP International Conference on Life Cycle Engineering, pp. 230-235, Hefei, China, May 19-21, 2010. (Germany-Taiwan Cooperation).

  22. Cheng-Jung Yang*; Jahau Lewis Chen, “TRIZ Method for Eco-innovation with Case-Based Reasoning,” 6th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Sapporo, Japan, December 7-9, 2009.

  23. Cheng-Jung Yang*; Jahau Lewis Chen, “An Eco-Innovation Method for Product Design based on TRIZ and Case- Based Reasoning,” 16th CIRP International Conference on Life Cycle Engineering, Cairo, Egypt, May 4-6, 2009.

  24. Jahau Lewis Chen; Lin-Chin Huang; Cheng-Jung Yang, “Two TRIZ Based Eco-Innovation Methods by Biomimetic Concepts and Case-Based Reasoning,” Proceedings of Electronics Goes Green 2008+, pp.707-712, Germany, 2008.

  25. Jahau Lewis Chen; Cheng-Jung Yang, “Multidisciplinary Design Optimization of LCD Monitor Including Structural and Environmental Factors,” Proceedings of EcoDesign 2007, 5th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan, December 10-13, 2007.

Domestic Conference Presentation

Corresponding Author *

  1. 吳欣璇、楊政融*， “探討FDM-3D列印可持續性最佳製造參數”， 台灣機電工程國際學會2022年第七屆全國學術研討會，彰化，彰化師範大學，4月22~23日，2022年。

  2. 施驊宸、蔡惠雅、黃靖珈、吳欣璇、楊政融*， “結合仿生概念與最佳化方法進行無人機葉片改良”，中國機械工程學會第三十八屆全國學術研討會，台南，成功大學，12月03~04日，2021年。

  3. 楊政融*、陳柏端、黃國修， “並聯式動力分配機構能量管理效率與汙染排放之研究”，中國機械工程學會第三十八屆全國學術研討會，台南，成功大學，12月03~04日，2021年。

  4. 楊政融*、陳柏端、黃國修， “複合動力系統的即時監控系統開發”，中國機械工程學會第三十七屆全國學術研討會，雲林，虎尾科技大學，11月20~21日，2020年。

  5. 陳冠霖、楊政融*，“彈簧輔助機構在光固化3D列印機最佳設計”，2020 精密機械與製造科技研討會，屏東，墾丁福華飯店，5月22~24日，2020年。

  6. 何思賢、楊政融*，“光固化3D列印機成型分離力和時間預測探討”，2020 精密機械與製造科技研討會，屏東，墾丁福華飯店，5月22~24日，2020年。

  7. 王啓豪、楊政融*、李英杰、蔡孟豪，“再生複合材簡易溫室之扣件受力分析”，2019 精密機械與製造科技研討會，屏東，墾丁福華飯店，5月24~26日，2019年。

  8. 林盈兆、張育堯、楊政融*，“利用田口方法建構下照式光固化三維列印機台最小分離力參數”，2018 精密機械與製造科技研討會，屏東，墾丁福華飯店，5月18~20日，2018年。(佳作論文)

  9. 張育堯、林盈兆、楊政融*，“利用田口方法探討下照式光固化三維列印機台列印最佳化參數”， 2018 精密機械與製造科技研討會，屏東，墾丁福華飯店，5月18~20日，2018年。

  10. 劉玄堂、楊政融*，“利用田口方法探討熔融層積成型技術對球形關節的最佳化參數”，2018 精密機械與製造科技研討會，屏東，墾丁福華飯店，5月18~20日，2018年。

  11. 賴宇勛、楊政融*，“中國古代機械工程-3D列印復刻龍骨水車”，2017 TPTW台灣精密工程科技研討會，37~42頁，虎尾，虎尾科技大學，11月24日，2017年。

  12. 呂志凱、楊政融*， “以3D列印技術探討復刻安提基特拉機械”，2017 TPTW台灣精密工程科技研討會，51~56頁，虎尾，虎尾科技大學，11月24日，2017年。

  13. 賴宇勛、楊政融*， “以逆向工程技術進行鳥禽類鳥喙修復”，2017 TPTW台灣精密工程科技研討會，126~130頁，虎尾，虎尾科技大學，11月24日，2017年。

  14. 鄭宇潔、陳明皇、鄭福吉、林耕霈、楊政融*， “基於RFID技術之牙技所物料管理系統”， 2017 精密機械與製造科技研討會，屏東，墾丁福華飯店，5月19~21日，2017年。

  15. 林育昇、楊政融*，" 3D列印機台中立體光刻成形技術之脫離力研究"，第十九屆全國機構與機器設計學術研討會，屏東，國立屏東科技大學，10月28日，2016年。

  16. 范綱宇、楊政融*、陳志堅，"微流體紙基檢測試片設計"，第十九屆全國機構與機器設計學術研討會，屏東，國立屏東科技大學，10月28日，2016年。

  17. 郭榮富*、楊政融、洪鼎侃、黃泓文，"萬向動態脊椎固定系統開發"，2015生物力學學術研討會，高雄，義守大學，10月16日，2015年。

  18. 陳家豪、施勵行、楊明長、楊政融、陳旺志，"綠色科技特色學程教學研究-綠色設計與產品"，2010永續性產品與產業管理研討會，雲林，國立雲林科技大學，3月19日，2010年。

  19. 楊政融*、陳家豪，"結合TRIZ與CBR於產品永續創新設計"，中國機械工程學會第二十六屆全國學術研討會論文集，台南，國立成功大學，11月20、21日，2009年。

  20. 楊政融*、陳家豪，"以綠色案例與TRIZ為基礎的綠色創新設計方法"，2009永續性產品與產業管理研討會，台南，國立成功大學，3月21日，2009年。

  21. 楊政融*、陳家豪，"以TRIZ與案例為基礎的綠色創新設計方法"，中華萃思學會第三屆學術暨實務研討會，新竹，中華大學，11月22日，2008年。

  22. 楊政融*、陳家豪，"液晶螢幕考量生命週期之最佳化設計"，2006永續性產品與產業管理研討會，台南，國立成功大學，3月18日，2006年。

Patent

  1. 李英傑、蔡孟豪、楊政融、曾向榮、陳克宜，“環保溫室棚架”，台灣專利發明號: I692300，2020年。

  2. 楊政融、藍泓翔，“排水散熱磁磚及其排水補水系統”，台灣專利發明號: I686529，2020年。

  3. 楊政融、林育昇， “3D列印機控制系統及其控制方法”，台灣專利發明號: I680862，2020年。

  4. 楊政融、林育昇，“三維列印機”，台灣專利發明號: I617879，2018年。

  5. 彭邵于、沈朋志、楊政融、林聖淇、吳信志、張廉本、周志任，"牛隻卵巢智能之細胞注射器"，台灣專利發明號:I602550，2017年；新型M539332，2016年。

  6. Eugen Koch; Cheng-Yung Yang; Laura Scholze, “Portable Infusion Pump”, US20160250422A1, Sept. 01, 2016.

Special Report

  1. 楊政融，"可拋棄式乳牛人工幹細胞注射裝置"，屏科大研發專刊，第24期， pp.4-6，2016年。

  2. 楊政融，"自動調力之光固化3D列印機器開發"，屏科大研發專刊，第28期， pp.5-10，2017年。


Awards

Special competition

  1. 施驊宸、黃靖珈、蔡惠雅、楊政融， “無人機仿生葉片設計之效率量測與比對”，2021馬路科技-3D量測應用技術大賽-優勝。

  2. 曾啟源、洪楚洋、林憲為、楊政融， “以逆向工程技術加速取得複雜曲面不同製程零件的品質驗收資訊”，2020馬路科技-3D量測應用技術大賽-佳作。

  3. 吳欣璇、楊政融， “排水散熱磁磚及其排水與補水系統”，108年度國立屏東科技大學學生實務專題製作競賽工程科技類-第二名。

  4. Guan-Lin Chen, Cheng-Yung Yang, Syin-Syuan Wu; “Water-Discharging tile with Heat Dissipation Function and Water Discharging and Replenishing System of the Same”, Silver Medal of 2019 10th International Innovation and Invention Competition.

  5. 王啟豪、蕭啟俊、楊政融， “風力發電葉片量測與3D列印之發電效率比對” ，2019馬路科技-3D量測應用技術大賽-冠軍。

  6. 賴冠霖、張書熏、蘇建富、楊政融， “應用3D掃描與3D成型技術於古代瓷器修復” ，2019馬路科技-3D量測應用技術大賽-佳作。

  7. 劉玄堂、留起家、張育堯、楊政融， “3D列印光固化成型耳道式藍牙耳機之精度檢測分析” ，2019馬路科技-3D量測應用技術大賽-佳作。

  8. 周鈺斐、林盈兆、張育堯、楊政融， “利用田口方法探討下照式光固化三維列印機台列印最佳化參數-以人字齒輪為例”，2018馬路科技-3D量測應用技術大賽-優勝。

  9. 劉玄堂、張智評、黃柏誠、楊政融， “利用田口方法探討FDM對於列印圓形模型的佳參數化-以球型關節為例”，2018馬路科技-3D量測應用技術大賽-佳作。

  10. 楊政融、林育昇， “三維列印機”，2018台灣創新技術博覽會參展-銅牌。

  11. 劉玄堂、楊政融， “汽車發電機”，2018經濟部工業局: 3D列印主題創作競賽-品味造型組(A)-佳作。

  12. 楊政融， “可調分離力之光固化製程三維列印機器開發”，107年度屏科大教師研發成果競賽智慧生活類-特優。

  13. 劉玄堂、張智評、黃柏誠、林宏偉、陳弈均、楊政融， “FDM 3D列印遠端監控系統”，107年度國立屏東科技大學學生實務專題製作競賽工程科技類-第二名。

  14. 賴宇勛、張毓麟、林盈兆、楊政融， “3D掃描定位、公差比對與補正研究”，2017馬路科技-3D量測應用技術大賽-佳作。

  15. 賴宇勛、張毓麟、林盈兆、楊政融， “應用3D掃描與3D列印技術進行鳥禽類鳥喙修復”，2017全國實務專題創新創意競賽(崑山科大)-佳作。

  16. 張育堯、張智評、黃柏誠、林盈兆、周鈺斐、劉玄堂、楊政融， “以工業4.0架構開發之自動化簡易輸送機器”， 106年度國立屏東科技大學學生實務專題製作競賽工程科技類-佳作。