LIVE COURSE EVENT - INDONESIA
Embedded Files
The 13th Indonesia PLAXIS Course on Computational Geotechnical Engineering
The 13th Indonesia PLAXIS Course on Computational Geotechnical Engineering
Learn advanced techniques and solutions from the PLAXIS experts.
Local Participant Rp10.000.000,- / International Participant $1.000
THEME :
“Slope Stability Analysis, Deep Foundations, and Rock Tunnel Modelling using PLAXIS in Computational Geotechnical Engineering”
What You Will Learn?
What You Will Learn?
Meet Your Speaker(s)
Meet Your Speaker(s)
Pre Course - 7th December, 2025
1. Installation of PLAXIS programs and setup of course folders
2. Introduction to Plaxis 2D Connect
3. Introduction to Plaxis 3D Connect
Univ.- Prof. DIPL.- Ing. Dr. techn. Franz Tschuchnigg
Univ.- Prof. DIPL.- Ing. Dr. techn. Franz Tschuchnigg
Graz University of Technology l Austria
Prof. Helmut F. Schweiger
Prof. Helmut F. Schweiger
Graz University of Technology l Austria
Day 1 - 8th December, 2025
Geotechnical Modelling
1. Geotechnical Finite Element Analysis
2. Linear Elastic Perfect Plasticity Mohr-Coulomb Criterion
3. Nonlinear Computation
4. Critical State Soil Mechanics
5. Hardening Soil Small Models
6. Introduction to the Soil Test Tool
Prof. Harry Tan
Prof. Harry Tan
National University of Singapore l Singapore
Andreas Erdian Wijaya, S.T., M.T.
Andreas Erdian Wijaya, S.T., M.T.
Bandung Institute of Technology l Indonesia
Day 2 - 9th December, 2025
Geotechnical Modelling
1. Structural Elements in PLAXIS
2. Drained, Undrained & Consolidation Analysis
3. Groundwater and Hydrogeological modelling in PLAXIS
4. Soft Soil and Soft Soil Creep models
5. Modelling of Excavations in 2D and 3D
Dr. William Cheang
Dr. William Cheang
Principal Consultant, Geotechnical Analysis Group at Seequent
Dr. techn. Indra Noer Hamdhan, S.T., M.T.
Dr. techn. Indra Noer Hamdhan, S.T., M.T.
National Institute of Technology l Indonesia
Day 3 - 10th December, 2025
Slope Instability Analysis & Deep Foundations
1. Initial Stresses and Slope Stability Analysis
2. Slope Stability and Rainfall Induced Failures
3. Modelling of Deep Foundation
4. Modelling features in PLAXIS 3D for pile group analysis
5. Embedded Beams (3D), Embedded Beams with Interaction Surface, and Embedded Beams Rows
Course Manager
Course Manager
Desti Santi Pratiwi, S.T., M.T.
Desti Santi Pratiwi, S.T., M.T.
National Institute of Technology l Indonesia
Trainer
Trainer
Rinaldi Alamsyah, S.T.
Rinaldi Alamsyah, S.T.
National Institute of Technology l Indonesia
Trainer
Trainer
R. Fitri Virliani A, S.T.
R. Fitri Virliani A, S.T.
National Institute of Technology l Indonesia
Day 4 - 11th December, 2025
Modelling of Rock and Concrete AND Ground Improvement
1. Concrete Model & Applications
2. Modelling of Ground Improvement
3. Modelling of Compensation Grouting
4. Plaxis Automation Basics
5. Modelling of PVD+Soil Preloading and Vacuum Preloading
Day 5 - 12th December, 2025
Indonesian Users’ Success Seminar & Plaxis Meeting
1. User Success Seminar
(The course fee includes a full set of instruction materials and the use of a computer. The participants are asked to bring their own Notebook or Laptop. The course fee does not cover accomodation)
After the course, participants will receive an official letter/certificate about the number of Professional Development Hours (PDH) they have earned from this course.
ARE YOU READY FOR THE NEXT ACTIVITY???
ARE YOU READY FOR THE NEXT ACTIVITY???
LAKERS PLAXIS 2D
NGC Itenas bekerja sama dengan HMS ITB mengadakan Workshop Software Geoteknik - Plaxis 2D
NGC Itenas bekerja sama dengan HMS ITB mengadakan Workshop Software Geoteknik - Plaxis 2D
(17 Mei 2025)
(17 Mei 2025)
LIVE COURSE EVENT - INDONESIA
The 12th Indonesia PLAXIS Course on Computating Geotechnical Engineering
The 12th Indonesia PLAXIS Course on Computating Geotechnical Engineering
Learn advanced techniques and solutions from the PLAXIS experts.
Local Participant Rp10.000.000,- / International Participant $1.000
THEME :
“Slope Stability Analysis, Deep Foundations, and Rock Tunnel Modelling using PLAXIS in Computational Geotechnical Engineering”
What You Will Learn?
What You Will Learn?
Meet Your Speaker(s)
Meet Your Speaker(s)
Pre Course - 8th September, 2024
1. Installation of PLAXIS programs and setup of course folders
2. Introduction to Plaxis 2D
3. Introduction to Plaxis 3D
Univ.- Prof. DIPL.- Ing. Dr. techn. Franz Tschuchnigg
Univ.- Prof. DIPL.- Ing. Dr. techn. Franz Tschuchnigg
Graz University of Technology l Austria
Prof. Helmut F. Schweiger
Prof. Helmut F. Schweiger
Graz University of Technology l Austria
Day 1 - 9th September, 2024
Geotechnical Modelling
1. Geotechnical Finite Element Modeling
2. Elasto-Plasticity and Mohr-Coulomb Criterion
3. Nonlinear Computation
4. Critical State Soil Mechanics
5. Hardening Soil, HS-small Models, & GHS
6. Introduction to the Soil Test Tool
Prof. Harry Tan
Prof. Harry Tan
National University of Singapore l Singapore
Dr. Imam Sadisun
Dr. Imam Sadisun
Bandung Institute of Technology l Indonesia
Day 2 - 10th December, 2024
Geotechnical Modelling
1. Structural Elements in PLAXIS 2D and 3D
2. Groundwater and Hydrogeological modelling in PLAXIS
3. Undrained Condition and Consolidation Analysis
4. Soft Soil and Soft Soil Creep models
5. Modelling of Excavations in 2D and 3D
Dr. William Cheang
Dr. William Cheang
Principal Consultant, Geotechnical Analysis Group at Seequent
Dr. techn. Indra Noer Hamdhan, S.T., M.T.
Dr. techn. Indra Noer Hamdhan, S.T., M.T.
National Institute of Technology l Indonesia
Day 3 - 11th December, 2024
Slope Instability Analysis & Deep Foundations
1. Initial Stresses and Slope Stability Analysis
2. Slope Stability and Influence of Rainfall
3. Modelling features in PLAXIS 3D for pile group analysis
4. Single pile, Pile Groups, and Piled-Raft Analysis
5. Embedded Beams (3D), Embedded Beams with Interaction Surface, and Embedded Beams Rows
Course Manager
Course Manager
Desti Santi Pratiwi, S.T., M.T.
Desti Santi Pratiwi, S.T., M.T.
National Institute of Technology l Indonesia
Trainer
Trainer
Rinaldi Alamsyah, S.T.
Rinaldi Alamsyah, S.T.
National Institute of Technology l Indonesia
Trainer
Trainer
R. Fitri Virliani A, S.T.
R. Fitri Virliani A, S.T.
National Institute of Technology l Indonesia
Day 4 - 12th December, 2024
Modelling of Rock Tunnels & Caverns
1. Rock Engineering and Rock Mass Classification practices in Indonesia
2. Hoek-Brown, HB-Softening, Jointed Rock, Iso-JR models, and Swelling Rock models
3. Modelling of rock Tunnelling, NATM, and Concrete Model
4. Applications of 3D Finite Element Analysis in Complex Hydropower Engineering
5. Modelling of Tunnel No. 6 Jakarta-Bandung High-Speed Railway, Indonesia
Day 5 - 13th December, 2024
Indonesian Users’ Success Seminar & Plaxis Meeting
1. User Success Seminar
(The course fee includes a full set of instruction materials and the use of a computer. The participants are asked to bring their own Notebook or Laptop. The course fee does not cover accomodation)
After the course, participants will receive an official letter/certificate about the number of Professional Development Hours (PDH) they have earned from this course.
WHAT'S NEW
WHAT'S NEW
[ NGC COURSE 2024 ]
INDONESIAN PLAXIS ADVANCED COURSE
Bali - Indonesia, 8 - 13 December 2024
The course brings together experts and analysts from across the region. This computational geotechnics course is tailored for engineers and researchers seeking knowledge on the use of Plaxis. Discover new potentials for effective and confident usage of Plaxis Finite Element Codes within your professional organisation.
In this course,you will learn advanced techniques and solutions from experts from Plaxis and partner academic institutions. Plaxis numerical analysts will have the opportunity to further develop their understanding of Plaxis Code's extensive range of capabilities.
SUPPORTED BY :
SPONSORED BY :
[ NGC ONE DAY WORKSHOP 2024 ]
NGC ONE DAY WORKSHOP
Bandung - Indonesia, 27 June 2024
"GEOTECHNICAL MODELLING OF ROCK SLOPE AND TUNNELS"
The National Geotechnics Center proudly presents a one-day workshop on "Geotechnical Modelling of Rock Slope and Tunnels," featuring esteemed speakers from renowned institutions and industries. Dr. Eng. Imam Achmad Sadisun from the Bandung Institute of Technology, Dr. William Cheang from Seequent, and Dr. techn. Indra Noer Hamdhan from ITENAS, along with other experts, will share their knowledge and insights. This comprehensive workshop will cover various aspects of geotechnical modeling, providing participants with an in-depth understanding of slope stability analysis, PLAXIS geotechnical modeling, and advanced tunnel modeling techniques.
Scheduled for Thursday, June 27, 2024, at the Audio Visual Room in Building 12 of Itenas Campus, this event promises a full day of learning and hands-on exercises. Participants will have the opportunity to explore topics such as slope stability in discontinuous rocks, PLAXIS modeling for slopes and tunnels, and NATM tunnel modeling using PLAXIS 2D and 3D. Practical exercises will include tunnel excavation methods and rock slope modeling using the Hoek-Brown soil model. With sessions led by distinguished experts like Mr. Serkandi Kiung and Mr. Rinaldi Alamsyah, this workshop is a must-attend for professionals seeking to enhance their geotechnical modeling skills.
SPONSORED BY :
Page updated
Google Sites
Report abuse