We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-23 · 7 min read · Independent comparison
If you want to upgrade the cable on a pair of Audio Technica studio headphones you already own, choose NewFantasia Replacement Upgrade Cable; if you need a complete pair of budget wired earphones for running, calls and everyday listening, choose Holiper Dual Driver. These two products are not really competitors — one is a spare part, the other is a finished product — so the right pick comes down to what's missing in your setup right now.
• NewFantasia's biggest strength: a purpose-built replacement cable with a locking 2.5mm connector designed specifically for Audio Technica ATH-M50x, ATH-M40x, ATH-M70x and ATH-M60X headphones.
• NewFantasia's biggest trade-off: it is only a cable. No drivers, no earpads, no sound of its own — useless unless you already own one of those headphones.
• Holiper's biggest strength: a complete, ready-to-use pair of dual-driver in-ear headphones with a mic, volume slider, ear hooks and accessories in the box.
• Holiper's biggest trade-off: the sound and fit are tuned for sporty, on-the-go listening rather than critical studio monitoring.
• Buy NewFantasia if your ATH cable is frayed, too short, or you want a braided replacement with a 6.35mm adapter for your amp.
• Buy Holiper if you need a full set of earphones for the gym, commuting or calls and don't own (or don't want) over-ear studio cans.
NewFantasia's cable is a single-purpose product, and that's exactly the point. It's a 1.5-meter (4.9 ft) replacement cord built for the Audio Technica ATH-M50x, ATH-M40x, ATH-M70x and ATH-M60X. The jack arrangement is 3.5mm male on one end and 2.5mm male on the other, with a 6.35mm adapter included — and critically, it uses the same twist-lock mechanism as the stock cable, so it seats and holds the way the original does. That locking detail matters. A generic aux cable will often fit the jack but not lock, which means it can pull loose mid-session. This one is made to click in properly.
The construction is where the "upgrade" part comes in. The inner conductor is OFC (oxygen-free copper) wire, and the outer jacket is braided. The cable diameter is 4mm, which is noticeably chunkier than a typical thin stock cord. In practice, a braided 4mm jacket resists the kinking and jacket-splitting that eventually kills thin rubber cables, and braiding also tends to cut down on the handling noise you hear when the cable rubs against your shirt. The 1.5m length is a sensible middle ground: long enough to reach from your head to a desk amp or the seat pocket in front of you, short enough not to snag on everything.
Who should buy it? Anyone who already owns one of those four Audio Technica models and whose cable is worn, intermittent, or simply too short. If you record, mix, or just listen at a desk and want to run the headphones off a 6.35mm output, the included adapter covers that with no extra purchase. Who should skip it? Anyone who doesn't own an ATH-M50x/M40x/M70x/M60X. This cable has no other use. It also isn't a sound upgrade in the sense of changing your headphone's tuning — it's a build-quality and ergonomics upgrade, so if you're happy with your stock cable, there's nothing here you need.
Holiper's Dual Driver is a full pair of wired in-ear headphones, and it's aimed at a very different buyer. The design is in-ear with ear hooks, which is the classic sport/run form factor: the hook wraps over the top of your ear so the buds stay put when you move. It uses dynamic drivers measuring 10mm, with an impedance of 16 ohm and a frequency range of 20 Hz to 20,000 Hz. Low impedance like 16 ohm is friendly to phones and laptops — you don't need a dedicated amp to get usable volume out of them.
The feature list is genuinely practical. There's a tactile volume slider and a multi-function button on the cable for music and call control, and the cable itself is braided and tangle-resistant at 1.2m, terminating in a gold-plated 3.5mm plug. Holiper also lists sound isolation, which in an in-ear design comes from the seal the tip makes in your ear canal — that's the main reason IEMs cut background noise better than open on-ears. In the box you get extra eartips, a leather-like pouch and a cable clip, and Holiper states a one-year warranty with a replacement if the item malfunctions within that period.
So who is this for? Runners, gym-goers, commuters, and anyone who takes a lot of calls and wants a cheap, self-contained wired set with a microphone and inline controls. The ear-hook fit plus sound isolation is a genuinely good combination for noisy environments where you don't want to fight with a headband. Who should skip it? If you want the wide soundstage and detail of over-ear studio headphones, or you do critical listening and mixing, in-ears at this level aren't the tool. And if you're just looking to replace a broken ATH cable, buying a whole set of earphones doesn't solve your problem.
• If you already own ATH-M50x/M40x/M70x/M60X and your cable is failing → NewFantasia. It's the only one of the two that fits those headphones.
• If you need a complete set of earphones from scratch → Holiper. The NewFantasia cable can't produce sound on its own.
• Best for running and workouts → Holiper. Ear hooks, sound isolation and a 1.2m tangle-free braided cable are built for movement.
• Best for desk and studio use → NewFantasia. The 1.5m length plus the included 6.35mm adapter suits amp and interface connections.
• Best for hands-free calls → Holiper. It has a microphone, volume slider and multi-function button; the cable has none of that.
• Best for durability of the cable jacket → NewFantasia. A 4mm braided OFC cable with the original-style locking connector is a sturdier replacement than a thin stock cord.
• Best if you want accessories included → Holiper. Extra eartips, pouch and cable clip come in the box; the NewFantasia package is one cable.
• Best low-fuss option → depends on the gap in your kit. A replacement part versus a finished product isn't a like-for-like choice — match it to what you're missing.
In my opinion, these aren't substitutes, so I'd frame it as fixing a problem rather than picking a winner. If you own an ATH-M50x, M40x, M70x or M60X and your cable is dead or annoying, I'd buy the NewFantasia Replacement Upgrade Cable — it locks in like the original, uses braided OFC wire, and includes the 6.35mm adapter, which is exactly what a headphone cable needs to do. If instead you need a complete, inexpensive wired earphone for running and calls, I'd buy the Holiper Dual Driver, because it's a usable product on day one with the mic, controls and sport fit already there. The deciding question is simple: are you replacing a part, or buying a whole set?
FAQ
Yes, it terminates in a 3.5mm jack and has a 16 ohm impedance, so it's easy to drive from phones and laptops. Note that phones without a 3.5mm port need an adapter, which isn't listed in the box contents.
They're not comparable. The NewFantasia is a cable and doesn't change your headphone's tuning — it's a build and ergonomics upgrade. The Holiper is a full earphone with 10mm dynamic drivers, 16 ohm impedance and a 20 Hz–20,000 Hz range, tuned as extra-bass sport earphones.
I don't quote prices here — both are budget-friendly categories, but the numbers change, so check the current price on Amazon before deciding. Also remember the NewFantasia package contains only the cable, not headphones.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: UGREEN Headphone Splitter vs Callez Replacement Audio Cable, Maxell ANC Headphones vs JoySpark Kids: 40mm Driver, SOULWIT Earpads vs G GVOEARS Replacement Ear Pads