Netgear router login is the first and foremost step to configure your router and the wireless network. But, at times, users find the Netgear Nighthawk router login process a bit complex and can’t do it on their own. If this is the case with you, we are here to help you! Here, we have listed all the essential steps that one needs to follow for Netgear Nighthawk router login. Let’s take the plunge and get to know the complete steps to login to Nighthawk router.

  • Connect your modem to the router using an Ethernet cable.

  • Make sure both your devices are getting an adequate power supply.

  • Now, launch a web browser of your choice. You can choose between Chrome, Edge, Internet Explorer, Safari, and Mozilla.

  • Once done, type in the address bar of your web browser.

  • You can also use the default IP address as an alternative to the default web address to login to Nighthawk router.

  • Next, you will land on the Netgear Nighthawk router login screen and be asked to enter your username and password.

  • So, enter the default credentials.

  • You are all done!

Note: You can also perform the Netgear Nighthawk router login using the Netgear Nighthawk app for PC Windows 10.

Though the Netgear Nighthawk router login process is quite simple, some users get stuck and can’t complete it successfully. Either they get trapped with an error message or are redirected to the website where no info is given regarding the process. For troubleshooting such an issue, our experts are on the qui vive to help you via chat, and email. If you are in a hurry and need help regarding your Nighthawk login, we recommend you get in touch with our expert technicians and get success while doing login to Nighthawk router.

What is is the default web address used to log into your Netgear WiFi router. You can use or to access the online router login Netgear portal. After login, you can set up a brand new WiFi router with great ease.

Apart from helping you set up your router, login also allows you to change the basic and advanced settings of your existing home router. With the web address you can not only login to Nighthawk router but also will be able to change the SSID and password, set up parental controls, configure security settings for your network, perform the Netgear Nighthawk firmware update, and much more.

One can access this web address using an internet browser. However, keep in mind that the browser you use for login is up-to-date with the latest version. Else, you may bump into several error pop-ups rather than the default Netgear router login web page.

Tips to Access Netgear Router Login Page

So, you are all set to access the routerlogin page! Prior to proceeding further with the Netgear router login steps, here are a few tips to consider for hassle-free login:

  • Make sure that your Netgear WiFi router and home modem are placed in the same room. Doing so will make sure that their WiFi signals don’t get conflicted with one another. You must access the routerlogin net start web page only after placing both the devices at a little distance apart.

  • In the event that you have a very congested space to place your WiFi devices, it is recommended you turn off the WiFi devices that are not in use at a moment. You may experience technical glitches while logging into the portal if all the WiFi devices are connected to the home network concurrently.

  • Most Netgear WiFi routers come with external antennas for superior connectivity. On the off chance if you too have received external antennas with your router, then you must connect those antennas to your router. Only after that, try accessing the Netgear router login web page.

  • Use only the default admin username and passphrase for the first-time Netgear Nighthawk router login.

  • Try using the Netgear Nighthawk app for PC Windows 10 to access the Netgear router login page.

  • Last but not least, ensure that your Netgear wireless router is getting the proper power supply from the wall socket to login to Nighthawk router.

Steps for Netgear Login Via

Accessing the default router login Netgear web page is quite simple. All you need to do is just follow the below-mentioned steps in the exact given order:

  • Power on your Netgear WiFi router by plugging it into an electrical outlet.

  • Grab an Ethernet cable and use it to make a wired connection between your router and modem or the main access point.

  • Now, turn on your computer or laptop.

  • Load up a web browser on it.

  • Type in the address bar, appearing at the top-left side.

  • Once done, hit the Enter key.

  • You will now be redirected to the Netgear login web page.

  • Enter the username and password into the given fields.

  • Click on the Log In button.

Note: If you are accessing the login for the very time, use the default admin user ID and passphrase. On the other hand, if you have ever changed the default Netgear login details to something else, use them instead.

Kudos! You are all done with the Netgear login. If you come across any sort of technical issue during the Netgear Nighthawk router login, feel free to contact our experts anytime.

Netgear WiFi Login Using the Router Default IP

Unable to access the Netgear WiFi login admin page using the web interface? If so, use the Netgear router default IP for login. is the default IP used by Netgear wireless routers. Let’s have a look at the steps to use for accessing the Netgear WiFi login page:

  • Be certain that your computer or laptop is connected to a high-speed internet connection.

  • Now, pull up a web browser you often use.

  • Use the keyboard and type or in the address bar.

  • Avoid using ‘.net’ or ‘.com’ extensions at the end of the Netgear router default IP.

  • The Netgear WiFi login page displays once you press the Enter key.

  • Insert the user ID in the first field whereas passphrase into the second field.

  • Hit Log In.

Cheers! You have now reached the Netgear WiFi login admin panel. From here, you can set up your router and change its settings as per your requirements. Not Working?

Nighthawk Extender Login

If not working or you are seeing ‘you are not connected to your router’s network’ error, don’t worry! We have got you covered! Here is a list of troubleshooting steps to help you fix the issue:

  • Cross-check the web address you have entered. Perhaps there are typing errors in the entered URL, preventing you from accessing the Netgear router login page.
    Confirm if your wireless router is receiving a fluctuation-free power supply.

  • Make sure that the wall socket in which your router is plugged in is not damaged or short-circuited.

  • Check the Power LED on your router. It should be visible in solid green color.

  • Delete cache, cookies, and browsing history from the web browser you are using for Netgear login.

  • Keep in mind to use only the latest web browser version for Netgear router login.

  • As is an online login portal, so you need an active internet connection for accessing it. Therefore, make sure to access a constant and fast internet connection throughout the login process.

Configuring the extender has become a problem for many users, especially those who are not tech-savvy. If you are seeking help for your Netgear Nighthawk extender login, then worry not! We have got your back! Walkthrough the step-by-step guide below and log in to your extender without any hassle. Here we go:

  • First, unbox your extender and connect the available antennas.

  • Now plug in your extender to a power outlet.

  • Once done, connect the device to your existing router either using an Ethernet cable or wirelessly.

  • Get access to a web browser and enter in the web address bar.

  • As soon as you access the default web address, you will land on the Nighthawk extender login page.

  • Here, you will be asked to enter the default username and password. So, do the same.

  • You are now on the Genie Smart Setup wizard. From here, you can tweak various settings of your extender the way that suits you best.

That’s it! It was how you can perform an extender login. You can also login to your extender using the Nighthawk App for PC. For any assistance, while executing the Nighthawk extender setup process using the Netgear Nighthawk app for PC Windows 10, get in touch with us.

Still Unable to Access Netgear Router Login Page?

In case you are still seeing the ‘ not working’ error, then you need to apply some advanced troubleshooting tips highlighted below to login to Nighthawk router:

  • Power cycle your Netgear WiFi router. For those who are too new to the term, power cycling means turning off your router, wait for a while, and then turning it on again.

  • On the off chance if you have set up firewall settings for your computer or home WiFi network, perhaps that’s the reason why you are not able to access login or start page. So, temporarily disable the firewall settings on your network and computer system and then try logging in again.

  • If you are using a WiFi connection to access the Netgear router login web page, switch to the Ethernet wired connection and try again.

  • You can also use the default Netgear router IP for login instead of the routerlogin net web address.

  • Be certain that you are using the latest Netgear Nighthawk firmware update. If not, update your Netgear router firmware right away. You can also use the Netgear Nighthawk app for PC Windows 10 to update the firmware on your Netgear Nighthawk WiFi device.

These were some of the advanced troubleshooting tips that will surely help you get rid of the not working or routerlogin refused to connect issue. However, in case you are still struggling with the same ‘can’t login to Nighthawk router’ issue, don’t hesitate to contact our highly-experienced technicians at any time. They will provide you the prompt and reliable solutions to fix the issue immediately.

Nighthawk Login: Common Issues

Users face an array of issues while doing Nighthawk login. Here, we have listed some of the most common router login Netgear issues informed by users from around the world to our professionals’ team.

For Nighthawk Extenders:

For Nighthawk Routers:

  • is not accessible.

  • My extender keeps disconnecting.

  • Red light issue on my extender.

  • How to update my extender using the Nighthawk app for PC.

  • My WiFi extender is not connecting to the internet.

  • Can’t log in to my wireless range extender.

  • Default username and password for extender login are not working.

  • Can’t see Genie Smart Setup Wizard.

  • not working.

  • Can’t update the router firmware using the Nighthawk router app

  • My router cannot connect to the Internet.

  • Default credentials are not working.

  • Forgot password to perform Nighthawk router login.

  • How do I control my kids’ access to the internet?

  • My router says connected but no internet access.

  • Can’t access the default router login Netgear portal.

If any of the aforementioned issues are hampering your overall Nighthawk login experience, feel free to reach out to us via chat for quick help. We have, on board, a team of highly-trained technicians who can solve almost any issue related to Nighthawk products, be it related to router or extender. Simply contact us to get rid of any issues related to your Netgear Nighthawk WiFi device.

Nighthawk Router FAQs

Is it important to update firmware on Nighthawk router?

Yes, firmware updates bring some changes in the program, which are essential for enabling the corresponding devices to not only work proficiently but also fix the bugs and issues for better security. Updating your Nighthawk router to the latest firmware version will help you increase the functionality, performance, and stability of your device.

How many devices can connect to a Nighthawk router?

The Nighthawk router can connect up to 64 devices (32 devices on each band) at the same time. On a tri-band Nighthawk router, you can connect up to 96 devices in one go.

Do Nighthawk home routers support SNMP?

No, none of the home routers support SNMP.

Can I change the admin name of my Nighthawk Router?

Yes, the login username of your router can be changed. All you need to do is, access the router setup page either via default web address or IP and then enter the default credentials. Now, navigate to the Network Settings > Tool > Admin. Once there, change the login name to something new as per your preference and hit on Apply button.

Do Nighthawk home routers support a third-party NAS?

Yes, you can connect any network storage device to the Ethernet port of your Nighthawk router. Only thing you need to ensure is that check whether it is getting a valid IP address from your router or not. If yes, it will be visible from the network.

How many port forwarding entries are allowed for Nighthawk routers?

64 entries are allowed for the Nighthawk router, whereas for the older routers only 20 entries are allowed.

How to configure Nighthawk router without CD?

The Nighthawk WiFi routers do not need any kind of configuration CD to complete the installation process because the WiFi devices come pre-installed with the Setup Wizard software. All you need to do is physically connect your router with your modem and the setup wizard will serve you with the rest.

In case you find any difficulty while doing Nighthawk router login, you can get in touch with our experts.

How to log in to Nighthawk router?

To log in to your Nighthawk router, all you need to do is: Connect your modem to the Nighthawk router. Now, launch any of your preferred web browsers on your device and visit You will be prompted to enter Nighthawk login credentials. Enter the default login credentials and you're all done!

How to change Nighthawk router admin password

Log into your Nighthawk router using the Nighthawk login credentials.

      • Navigate to Settings > Administration > Set Password

      • Fill the details on the Set Password Page.

      • Once done, hit Apply.

      • Your Nighthawk router's password reset.

How to update Nighthawk router firmware?

If you want to update the firmware of your Nighthawk router, then here's how to do it.

  • Check if any firmware update is available for the router model you own by navigating to the official site.

  • If yes, download the firmware and save it on your device.

  • Next, access the dashboard of your router and locate the Firmware Update option.

  • Hit on the button and update the file you have downloaded earlier.

To get any kind of assistance, be in touch with our expert executives.

Can I leave my Nighthawk router power up all the time, or do I need to turn it OFF when I no longer need it?

You can leave your Nighthawk router's power light on all the time. There is no need to turn off your router. However, if you want to save some electricity, then consider turning it off.