Tape-out
Configurable RO-PUF
A BRO-PUF-based cryptographic security solution is implemented using configurable ring oscillators.
The ring oscillators are constructed using tristate inverter logic connected back-to-back.
The design aims to enhance security, flexibility, and resistance to side-channel attacks.
Functional Testing
A circuit logically equivalent to the proposed BRO-PUF was developed and tested on Basys3 board.
Bistable ring operation was verified using an XOR latch.
Total Instances: 256 implemented for testing.
Specifications:
SCL180nm CMOS
Number of PUF: 16
Frequency: 778.4 MHz
PUF Output: 32
Power: 59nW
Supply voltage: 1.8V
Die area: 4x4
Arbiter PUF
Delay-based PUF: An Arbiter PUF exploits tiny manufacturing variations in the delay of two parallel signal paths on a chip. A challenge configures a series of multiplexers to direct the paths differently.
Arbiter decision: At the end of the paths, an arbiter latch determines which signal arrives first, producing a single response bit (0 or 1).Different challenges create different delay configurations, giving the PUF a large CRP space useful for authentication.
Lightweight hardware security: Arbiter PUFs are compact, low-power, and commonly used for device identification, though they can be vulnerable to machine-learning attacks if not enhanced.
Functional Testing: working of 64 bit and 128 bit arbiter PUF circuits was developed and tested on Basys3 board.
Technology: Skywater 130nm
Pin Description
Input pin: Output pin:
ipulse = Pin no. 22 oresponse = Pin no. 20
ichallenge= Pin no. 23 to 37
Total Power: 1.17uW
Clock Speed: 10MHz
Die Area: 0.16 mm²
More details: https://platform.efabless.com/projects/1732