ND Cockpit Support
Questions, problems or ideas? Email ndcockpit@gmail.com. I usually reply within a few days.
What you need
A 2016-or-later MX-5 (ND). Tyre pressures need the North American models, which have tyre sensors in each wheel.
An OBDLink CX Bluetooth adapter.
An iPhone with iOS 26 or later.
Connecting
Plug the adapter into the OBD port under the dashboard, turn the ignition on and open the app. It finds the adapter by itself; you don’t need to pair it in iOS Settings. If it doesn’t connect, close any other app that uses the adapter, such as OBDLink’s own app, because only one app can use it at a time.
“Waiting for tyre data”
The tyre sensors report once the car is on, and they can take a minute or two of driving to wake up.
Tyre pressures differ from my gauge
Settings → Tyre pressure calibration lets you set a correction for each wheel. If readings appear on the wrong wheels after rotating your tyres, use Sensor positions there.
Try it without the car
Tap the antenna button at the top left and choose Demo to see the app working with a simulated car.
Cockpit display
You can try the Cockpit for free with demo data. A one-time purchase unlocks it for your car. On a new phone, use Settings → Display → Restore purchases.
Leaving the adapter plugged in
When the car is off, the app only checks the battery voltage now and then. If the car will sit unused for a while, unplug the adapter.
ND Cockpit is an independent app. It isn’t made, approved or endorsed by Mazda.