PUBLICATIONS: PEER-REVIEWED ARTICLES 

1. 1. S. Mahato, B. Roy, S. Bose, S. K. Sangwan, N. C. Das, M. D. Birowosutu, S. K. Ray, “Atomically precise ruddlesden-popper faults induced enhanced emission in ligand stabilized mixed halide perovskites”, Advanced Materials, e03680 (2025).

   2. J. Nayak, S. Nath Chowdhury, A. Mondal, A. Pal, S. Biswas, S. Giri, P. Banerji, N. C. Das, "Synergistic effect of MWCNT and CoFe₂O₄ in ethylene-octene copolymer foam for electromagnetic interference shielding and thermal management", Journal of Alloys and Compounds 1038, 182718 (2025).

   3. P. Gupta, S. Chattopadhyay, N. C. Das,"Short fiber reinforced elastomeric composites with enhanced mechanical and tribological properties for potential application in V-belts", Frontiers in Mechanical Engineering, 11, 1629780 (2025).

   4. B. Roy, T. Dey, S. Bose, S. Mahato, N. C. Das, S. K. Ray, “Superior photoconversion efficiency of nanocrystal sensitized solar cell based on all-inorganic CsPbX3 (X= Br, I) perovskites”, Nanoscale, 17, 10743 (2025).

   5. A .Yadav, C. M. Jiju, P. Kumar, N. C. Das, "Characterization of Ply Bulge Failures in Truck Bus Radial Tyres ", Frontiers in Mechanical Engineering 11, 1576195 (2025).

   6. S. Biswas, P. Das, S. Chakroborty, J. Nayak, A. Haridas CP, A. Katheria, T. Mondal, S. K. Ray, N. C. Das, “Multifunctional conductive elastomeric composites for broadband electromagnetic radiation shielding and biomechanical energy harvesting”, ACS Applied Polymer Materials 7, 7044-7062 (2025).

   7. S. Nath Choudhury, J. Nayak, A. Mondal, A. Pal, S. Giri, P. Banerji, N. C. Das, “Development of conductive thermoplastic elastomer blend nanocomposites for enhanced electromagnetic interference shielding in modern electronics”, Next Nanotechnology, 7, 100193 (2025).

   8. S. Das, P. Das, N. C. Das, D. Das, “ An investigation onsisal fiber reinforced carboxylate nitrile butadiene rubber composites”, Next Research, 100450 (2025).

   9. S. Nath Chowdhury, K. Chakraborty, I. Atrry, A. Pal, J. Nayak, S. Dhara, B. Chudasama, P. Banerji, N. C. Das, “Integrated approach to the synthesis and enhanced therapeutic efficacy of SPIONs for magnetic hyperthermia”, Materials Today Communications, 45, 112319 (2025).

   10. T. Ghosh, M. Mondal, M. Shee, T. K. Das, M. Mandal, P Banerji, N. C. Das, “Fabrication of folic acid-derived carbon dot-conjugated chitosan nanospheres as theragnostic agents for pH-responsive anticancer drug delivery”, ACS Applied Bio Materials, 8 (4), 3096 (2025).

   11. A. Yadav, C. M. Jiju, P. Kumar, N. C. Das, “Characterization of ply bulge failures in truck bus radial tyre”, Frontiers in Mechanical Engineering, 11, 1576195 (2025).

   12. M. Rahaman, S. Paul, N. C. Das, “Catalytic and noncatalytic pyrolysis of waste plastics: comparative analysis of liquid products from polyethylene, and mixed plastics with diesel and petrol”, Industrial & Engineering Chemistry Research, 64 (6), 3240 (2025).

   13. S. Paul, M. Rahaman, S. K. Ghosh, A. Katheria, N. C. Das, “Rubber compounds from pilot-scale supercritical carbon dioxide assisted devulcanized rubber: curing characteristics, mechanical and thermal properties”, SPE Polymer (2025).

   14. A. Katheria, P. Das, J. Nayak, B. Roy, A. Pal, S. Biswas, N. C. Das, “MXene and F3O4 decorated g-C3N4 incorporated high flexible hybrid polymer composite for enhanced electrical conductivity, EMI shielding and thermal conductivity”, Next Materials, 6, 100292 (2025).

   15. U. Kalita, S. Samanta, B. Gowd, N. C. Das, N. K. Singha, “A potential biobased thermoplastic elastomer based on b-myrcene via RAFT mediated mini-emulsion polymerization”, Polymer Chemistry, 65, 675 (2025).

   16. J. Nayak, P. Das, A. Pal, A. Katheria, N. C. Das, “Microcellular carbon nanotube/thermoplastics elastomer nanocomposites foam to amplify absorption driven electromagnetic interference shielding efficiency”, ACS Applied Polymer Materials, 6 (19) 11974 (2024).

   17. A. Pal, J. Nayak, B. Roy, S. Maiti, S. N. Chowdhury, P. Das, A. Katheria, S. K. Ray, S. Chattopadhyaya, N. C. Das, “Dual crosslinked interpenetrating polymer network-based porous hydrogel membrane for solid-state supercapacitors applications”, Polymer, 308, 127408 (2024).

   18. M. Shee, S. L. Banerjee, A. Dey, I. D. Jana, P. Basak, M. Mandal, A. Mondal, A. K. Das, N. C. Das, “pH-induced fluorescent active sodium alginate-based ionically conjugated and REDOX responsive multi-functional microgels for the anticancer drug delivery”, International Journal of Pharmaceutics, 662, 124490 (2024).

   19. S. Subhadarshini, N. K. Peyada, D. K. Goswami, N. C. Das, “ Review of battery-type transition metal (Cu, Co, and Ni) oxide based electrodes: from fundamental science to fabrication of a hybrid supercapacitor device”, Energy & Fuel, 38 (13), 11455-11493 (2024).

   20. A. Katheria, P. Das, H. Singh, J. Nayak, S. Paul, S. Biswas, N. C. Das, “Highly flexible EMA/Fe3O4@gg-C3N4 composite for thermal control and EMI shielding application”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 700, 134756 (2024).

   21. S. K. Ghosh, N. C. Das, “Effect of graphene nanoplatelets and nano zinc oxide on gas barrier and antibacterial properties of thermoplastics nanocomposite”, Polymer Engineering & Science, 64 (9), 4181  (2024).

   22. S. K. Ghosh, S. Paul, T. Ghosh, N. C. Das, “Design of interconnected graphene loaded thermoplastic elastomeric blend composites films for minimizing electromagnetic radiation and efficient heat management”, Polymer for Advanced Technologies, 35 (7), e6510 (2024).

   23. S. Nath Choudhury, J. Nayak, P. Das, A. Pal, A. Katheria, P. Banerji, N. C. Das, “Enhancing electrical characteristics and electromagnetic interference shielding effectiveness in thermoplastic elastomeric polymer blends by utilizing the selective distribution of carbon black”, Functional Composite Materials, 5 (4), 1-14, 2024.

   24. A. Katheria, P. Das, A. Bhagat, J. Nayak, S. Paul, N. C. Das, “Fe3O4@g-C3N4 and MWCNT embedded highly flexible polymeric hybrid composite for simultaneous thermal control and suppressing microwave radiation”, J. Alloys and Compounds, 988, 174287 (2024).

   25. S. Paul, J. Jeethirajan, A. Giri, S. K. Ghosh, M. Rahaman, K. Naskar, N.C. Das, “Optimization of scrap tire devulcanization process using Taguchi and Dear Method in a supercritical fluid extraction pilot scale setup”, Chemical Engineering and Processing-Process Intensification, 198, 109738 (2024).

   26. P. Das, A. Katheria, J. Nayak, A. Pal, B. Roy, S. Paul, S. Biswas, N. C. Das, “Stretchable and lightweight 2D MXene-based eleastomeric composites foam for suppressing electromagnetic interference”, Journal of Alloys and Compounds, 976, 173011 (2024).

   27. T. Ghosh, S. Nandi, A. Girigoswami, S. K. Bhattacharyya, S. K. Ghosh, M. Mandal, U. K. Ghorai, P. Banerji, N. C. Das, “Carbon dots for multiuse platform: intracullar pH sending and complementary intensified T1-T2 dual imaging contrast nanopores”, ACS Biomaterials & Engineering, 10 (2), 1112-1127 (2024).

   28. S. Das, P. Das, D. Das, N. C. Das, “A review of emerging bio-based constitutents for natural fiber polymer composites”, Journal of the Textile Institute (2024).

   29. S. K. Ghosh, N. C. Das, “Recent advances in Nanocly and graphene based thermoplastics nanocomposites for packaging applications”, Packaging Technology and Science, 37 (6), 503-531, 2024.

   30. S. K. Bhattacharyya, D. Biswas, N. Pandey, S. Nandi, A. Ghorai, G. Mukherjee, M. Mondal, N. C. Das, S. Banerjee, “Synthesis of 1, 2, 3-triazole link 5 fluorouracil-carbon dots-folate conjugates for target specific anticancer activity and cell imaging applications”, Nano-Structures & Nano-object, 38, 101160 (2024).

   31. K. Nath, S. K. Ghosh, P. Das, A. Katheria, N. C. Das, “Synthesis of ionic liquid modified 1-D nanomaterials and its strategical distribution into the biodegradable binary polymer matrix to get reduced electrical percolation threshold and electromagnetic interference shielding effectiveness”, Journal of Applied Polymer Science, 141(5), e54897 (2024).

   32. J. Nayak, P. Das, A. Katheria, S. Giri, P. Banerji, N. C. Das, “Fabrication of electrically conductive interconnected microcellular thermoplastic elastomer foam composite for absorption dominating EMI shielding with ultra low reflection”, Polymer Engineering & Science, 64 (3) 1194 (2024).

   33. P. Das, A. Katheria, A. Jana, M. Das, B. Roy, J. Nayak, K. Nath, S. K. Ghosh, A. De, N. C. Das, “Super-stretchable, self-healing 2D MXene-based composites for thermal management and electromagnetic shielding applications”, ACS Applied Engineering Materials 1, 1186-1200 (2023).

   34. A. Katheria, P. Das, S. K. Ghosh, J. Nayak, K. Nath, S. Paul, S. Biswas, N. C. Das, “Fabrication of 2D nanomaterials reinforced co-continuous binary blend composites for thermal management and EMI shielding applications”, Journal of Polymer Research, 30, 459 (2023).

   35. P. Das, A. Katheria, J. Nayak, A. Pal, B. Roy, S. Paul, S. Biswas, N. C. Das, “Stretchable and lightweight 2D MXene-based elastomeric composites foam for suppressing electromagnetic interference”, Journal of Alloys and Compounds, 976, 173011 (2023).

   36. K. Nath, S. K. Ghosh, P. Das, A. Katheria, N. C. Das, “Synthesis of ionic liquid modified 1-D nanomaterials and its strategical distribution into the biodegradable binary polymer matrix to get reduced electrical percolation threshold and electromagnetic interference shielding effectiveness”, Journal of Applied Polymer Science (2023).

   37. P. P. Maity, K. Kapat, P. Poddar, H. Bora, C. K. Das, P. Das, S. Ganguly, N. C. Das, D. Dhara, M. Mondal, A. Roy Chowdhury, S. Mukherjee, S. Dhara, “Capra cartilage-derived peptide delivery via carbon nano-dots for cartilage generatation”, Fron. Bioeng. Biotechnology, 11, 1213932 (2023).

   38. S. K. Ghosh, K. Nath, S. Paul, T. Ghosh, N. C. Das, “Investigation of the effect of electron beam irradiation on tensile, thermal and gas barrier properties of graphene nanoplatelet loaded thermoplastics nanocomposite films”, Radiation Physics and Chemistry, 214, 111310 (2023).

   39. S. K. Ghosh, K. Nath, S. Nath Chowdhury, S. Paul, A. Katheria, P. Das, N. C. Das, "Combination effect of functionalized high aspect ratio carbonaceous nanofillers and carbon black on electrical, thermal conductivity, dielectric and EMI shielding behaviour of co-continuous thermoplastic elastomeric blend composite films?, Chemical Engineering Journal Advances 15, 100505 (2023).

   40. S. Nath Choudhury, P. Das, P. Bhawal, A. Pal, P. Banerji, N.C. Das, “Double percolation behavior through the preferential distribution of conductive black in polymer blends to boost electrical properties and EMI shielding effectiveness”, Materialstoday Communications, 35, 106109 (2023).

   41. P. Das, A. Katheria, S. Ghosh, B. Roy, J. Nayak, K. Nath, S. Paul, N. C. Das, ”Self-healable and super-stretchable conductive elastomeric nanocomposites for efficient thermal management characteristics and electromagnetic interference shielding”, Synthetic Metals, 294 117304 (2023).

   42. T Ghosh, R Sahoo, SK Ghosh, P Banerji, N. C. Das, " Simplistic hydrothermal synthesis approach for fabricating photoluminescent carbon dots and its potential application as an efficient sensor probe for toxic lead(II) ion detection", Frontiers of Chemical Science and Engineering 17, 536-547 (2023).

   43. Palash Das, A Khatheria, K Naskar, N. C. Das, " Recyclable and Super-Stretchable Conductive Elastomeric Composites with a Carbon Nanostructure Interconnected Network Structure for Effective Thermal Management and Excellent Electromagnetic Wave Suppressor", Polymer-Plastics Technology and Materials, 62 (7), 889–908  (2023).

   44. K. Nath, S. K. Ghosh, P. Das, A. Katheria, N. C. Das, “Fabrication of lightweight and biodegradable EMI shield films with selective distribution of 1D carbonaceous nanofiller into the co-continuous binary polymer matrix”, Journal of Materials Science: Materials in Electronics 34, 773 (2023).

   45. S. Paul, M. Rahaman, S. K. Ghosh, A. Katheria, T. K. Das, S. Patel, N. C. Das, “Recycling of waste tire by pyrolysis to recuperate carbon black: An alternative reinforcing filler”, Journal of Material Cycles and Waste Management,  (2023).

   46. B. Roy, S. Mahato, S. Bose, A. Ghorai, S. S. Srivastava, N. C. Das, S. K. Ray, “Cu-doping induced phase transformation in CsPbI nanocrystals with enhanced structural stability and photoluminescence quantum yield”, Chemistry of Materials 35(1), 1601-1609 (2023).

   47. T. Ghosh, S.Nandi, S. K. Bhattacharyya, S. K. Ghosh, M. Mandal, P. Banerji, N. C Das, “Nitrogen and sulphur doped carbon dot: An excellent biocompatible candidate for in-vitro cancer cell imaging and beyond”, Environmental Research 217 (2023) 114922.

   48. P. Das, A. Katheria, K. Naskar, N. C. Das, “Recyclable and super-stretchable conductive elastomeric composites with a carbon nanostructure interconnected network structure for effective thermal management and excellent electromagnetic wave suppressor”, Polymer-Plastics Technology and Materials 62 (7), 889-909 (2023).

   49. P. Panda, A. Dutta, S. Pal, D. Ganguly, S. Chattopadhyay, N. C. Das, R. Das, “Strain sensing multi-stimuli responsive light emitting lanthanide-based tough and stretchable hydrogels with tunable luminescence and fast self-recovery using metal-ligand and hydrophobic interaction”, New J. Chem. 47, 57304-5750 (2023).

   50. A. Katheria, P. Das, S. Paul, K. Nath, S. Kumar Ghosh, N. C. Das, “Preferential localization of conductive filler in Ethylene-co-methyl acrylate (EMA)/Thermoplastic polyolefin (TPO) polymer blends to reduce percolation threshold and enhanced electromagnetic radiation shielding over K band region”, Polymer Composites, 43 (3), 603-615 (2023).  

   51. T. K. Das, S. K. Ghosh, N. C. Das, “Green synthesis of reduced graphene oxide/silver nanoparticles-based catalyst for degradation of wide range of organic pollutants”, Nano structures & Nano Objects, 34, 100960 (2023).

   52. K. Nath, S. K. Ghosh, A. Katheria, P. Das, S. Nath Chowdhury, P. Hazra, S. Azam, N. C. Das, "Design of interconnected 1D nanomaterials with selective localization in biodegradable binary thermoplastic nanocomposite films for effective electromagnetic interference shielding effectiveness", Polymers for Adanced Technologies. 34 (3), 1019-1034  (2023).

   53. S Sit, G Chakraborty, N. C. Das, "Development, characterization, and modelling of the dynamic mechanical properties of a highly flexible novel SWCNT/EMA nanocomposite", Materials Today Communication, 34, 105172 (2023).

   54. S K Bhattacharyya, S Nandi, T Dey, S. K Ray, M Mandal, N. C Das, S Banerjee, "Fabrication of a Vitamin B12-Loaded Carbon Dot/Mixed-Ligand Metal Organic Framework Encapsulated within the Gelatin Microsphere for pH Sensing and In Vitro Wound Healing Assessment", ACS Applied Bio Materials, 5 (12), 5693–5705 (2022).  

   55. T. Ghosh, S. Nandi, S. K. Bhattacharya, S. K. Ghosh, M. Mandal, P. Banerji, N. C. Das, "Nitrogen and sulphur doped carbon dot: An excellent biocompatible candidate for in-vitro cancer cell imaging and beyond", Environmental Research 217, 114922 (2022).

   56. A Katheria, P Das, S Paul, K Nath, S. K Ghosh, N. C. Das, "Preferential localization of conductive filler in ethylene‐co‐methyl acrylate/thermoplastic polyolefin polymer blends to reduce percolation threshold and enhanced electromagnetic radiation shielding over K band region", Polymer Composites (2022).

   57. S. K. Bhattacharyya, I. Das Jana, N. Pandey, D. Biswas, A. Girigoswami, T. Dey, S. Banerjee, S. N. K. Ray, A. Mondal, G. Mukherjee, N. C. Das, “Ho3+ dopped carbon dot/gelatin nanoparticles for pH responsive anticancer drug delivery and intracellular Cu2+ in sensing”, ACS Applied Nano Materials, 5 (8), 11809–11822  (2022).

   58. K. Nath, S. K. Ghosh, A. Katheria, P. Das, N. C. Das, "Facile production of binary polymer/ carbonic nanofiller based biodegradable EMI shield films with low electrical percolation threshold", Polymer Engineering & Science (2022).

   59. S. K. Ghosh, T. K. Das, S. Ganguly, S. Paul, K. Nath, A. Katheria, T. Ghosh, S. Nath Chowdhury, N. C. Das, “Carbon nanotubes and carbon nanofibers based co-continuous thermoplastic elastomeric blend composites for efficient microwave shielding and thermal management”, Composites Part A: Applied Science and Manufacturing, 161, 107118 (2022).

   60. S. Sit, K. Nath, N. C. Das, G. Chakraborty, “Superior electromagnetic interference shielding effectiveness of functionalized MWCNTs filled flexible thermoplastics polymer nanocomposites”, J Elastomer Plastics, 54 (6), 975–999 (2022).

   61. S. Sit, G. Chakraborty, N. C. Das, "Superior EMI shielding effectiveness with enhanced electrical conductivity at low percolation threshold of flexible novel ethylene methyl acrylate/single‐walled carbon nanotube nanocomposites", Polymer Engineering & Science 62 (6), 2047-2060 (2022).

   62. S. K. Ghosh, T. K. Das, S. Ganguly, K. Nath, S. Paul, D. Ganguly, N. C. Das, “Silane-functionalization of sodium montmorillonite and halloysite (HNT) nanoclays by ‘grafting to’ method to improve physico-mechanical and barrier properties of LLDPE/clay nanocomposites”,  Polymer Bulletin (2022). https://doi.org/10.1007/s00289-022-04281-4.

   63. A. Katheria, J. Nayak, N. C. Das, A journey of thermoplastic elastomer nanocomposites for electromagnetic shielding applications: from bench to transitional research", Materials Advances 3, 2670 - 2691 (2022).

   64. T. Ghosh, N. C. Das, "Current scenario and recent advancement of doped carbon dots: a short review scientocracy update (2013–2022)", Carbon Letters, 32, 953-977 (2022).

   65. T. K. Das, N. C. Das, "Advances on catalytic reduction of 4-nitrophenol by nanostructur materailsed as benchmark reaction", International Nano Letter (2022).

   66. S. K. Ghosh, T. K. Das, S. Ghosh, S. Remanan, K. Nath, N. C. Das, “Selective distribution of conductive carbonaceous inclusion in thermoplastic elastomer: a wet chemical approach of promoting dual percolation and inhibiting radiation pollution in X-band”, Composites Science and Technology, 210, 108800 (2021).

   67. M. Islam, M. Rahaman, Ali Aldalbahi, B. Paikaray, J. Moharana, S. Mondal, N. C. Das, P. Gupta, R. Giri, “High density polyethylene and metal oxides based nanocomposites for high voltage cable application”,  Journal of Applied Polymer Science, 51787 (2021) 

   68. S. Subhadarshini, R.Singh, A. Mandal, S. Roy, S. Mandal, S.Mallik, D. K Goswami, A. K. Das, N. C. Das, “Silver Nanodot Decorated Dendritic Copper Foam As a Hydrophobic and Mechano-Chemo Bactericidal Surface”, Langmuir, 37(31) 9356–9370 (2021).

   69. P. Das, S. K. Bhattacharyya, P. Banerji, N. C. Das, “Acoustic cavitation assisted synthesis and  characterization of photoluminescent carbon quantum dots for biological applications and their future prospective”, Nano-Structures and Nano-Objects, 25, 100641 (2021).

   70. Subhadarshini, E. Pavitra, G. S. R. Raju, N. R. Chodankar, A. Mandal, S. Roy, S. Mandal, M.V. Basaveswara Rao, D. K.Goswami, Y. S. Huh, N. C. Das, “One-pot facile synthesis and electrochemical evaluation of selenium enriched cobalt selenide nanotube for supercapacitor application”, Ceramics International, 47 (11), 15293 (2021).

   71. S. Remanan, P. K. Samantaray, S. Bose, N. C. Das, “Phase transited lysozyme particles and MoS2 nanosheets modified elastomer-like antibacterial and antifouling microfiltration membrane derived from poly (ethylene-co-methyl acrylate)/poly (vinylidene fluoride)(EMA/PVDF) blend for water purification application”, Microporous and Mesoporous Materials, 316, 110945 (2021).

   72. Kalita, S. Samanta, S. L. Banerjee, N. C. Das, N. K. Singha, “Biobased Thermoplastic Elastomer Based on an SMS Triblock Copolymer Prepared via RAFT Polymerization in Aqueous Medium”, Macromolecules 54, 1478-1488 (2021).

   73. K. Nath, S. Ghosh, P. Das, N. C. Das, “Facile preparation of light-weight biodegradable and electrically conductive polymer based nanocomposites for superior electromagnetic interference shielding effectiveness”, J. Applied Polymer Science, 138 (22), 50514 (2021).

   74. Das Jana, P. Kumbhakar, S. Banerjee, C. Gowda, N. Kedia, S. Kuila, S. Banerjee, N. C. Das, A. K. Das, I. Manna, C.S. Tiwary, A. Mondal, “Copper Nanoparticle-Graphene Composite based Transparent Surface Coating with Antiviral Activity against Influenza Virus”, ACS Applied Nano Materials, 4(1), 352-362 (2021).

   75. T. K. Das, S. Remanan, S. Ghosh, N. C. Das, “An environment friendly free-standing cellulose membrane derived for catalytic reduction of 4-nitrophenol: A sustainable approach”, Journal of Environmental Chemical Engineering, 9 (1) 104596 (2021).

   76. T. K. Das, S. Remanan, S. Ghosh, S. K. Ghosh, N. C. Das, “Efficient synthesis of catalytic active silver nanoparticles illuminated cerium oxide nanotube: A mussel inspired approach”, Environmental Nanotechnology, Monitoring & Management, 15, 100411 (2021).

   77. 11.  N. Ashok, M. Balachandran, S. Remanan, N. C. Das, “Nanoscale reinforcement in EPDM-CIIR blends: Experimental analysis and theoretical perspectives of mechanical and viscoelastic properties”, Composite Interfaces, 28 (1) 35-62 (2021).

   78. S. Ghosh, S. Remanan, Y. Bhattacharjee, A. Ghorai, T. Dey, T. K. Das, N. C. Das, “A Multifunctional Smart Textile Derived from Merino Wool/Nylon Polymer Nanocomposites as Next Generation Microwave Absorber and Soft Touch Sensor”, ACS Applied Materials and Interface, 12(15), 17988-18001 (2020).

   79. S. Subhadarshini, E. Pavitra, G. S. R. Raju, N. R .Chodankar, D. K. Goswami, Y. K. Han, Y. S. Huh, N. C. Das, “One-Dimensional NiSe-Se Hollow Nanotubular Architecture as a Binder-Free Cathode with Enhanced Redox Reactions for High-Performance Hybrid Supercapacitors”, ACS Applied Materials and Interface, 17(26), 29302 (2020).

   80. S. Bhattacharyya, M. Dule, R. Paul, J. Dash, Md. Anas, T. Mandal, P. Das, N. C. Das, S. Banerjee, “Carbon Dot Crosslinked Gelatin Nanocomposite Hydrogel for pH Sensing and pH-Responsive Drug Delivery”, ACS Biomaterials Science & Engineering, 6 (10), 5662–5674 (2020).

   81. R. Sanjay, N. Padmavathy, R. Rabiya, S. Ghosh, T.K. Das, S. Bose, R. Sen, N.C. Das, “An Approach to Prepare MoS2 Nanosheets Decorated PVDF Sponge for Oil/Water Separation and Antibacterial Applications”, Industrial & Engineering Chemistry Research, 59 (45), 20141–20154 (2020).

   82. P. Ghosh, K. Naskar, N. C. Das, “Enhancement of tribological and thermo-mechanical properties of phenolic resin friction composites by improving interactions between elastomeric phase and matrix resin”, SN Applied Sciences, 2,  1912 (2020).

   83. S. Mondal, R. Ravindren, P. Bhawal, B. Shin, S. Ganguly, C. Nah, N. C. Das, “Combination effect of carbon nanofiber and ketjen carbon black hybrid nanofillers on mechanical, electrical, and electromagnetic interference shielding properties of chlorinated polyethylene nanocomposites”, Composites Part B: Engineering 197, 108071 (2020).

   84. S. Mondal, R. Ravindhran, B. Shin, S. Kim, H. Lee, S. Ganguly, N. C. Das, C. Nah, “Electrical and electromagnetic interference shielding effectiveness of nano-structured carbon assisted poly(methyl methacrylate) nanocomposites”, Polymer Engineering and Science, 60 (10), 2414 (2020).

   85.  S. K. Ghosh, T. K. Das, S. Ghosh, S. Ganguly, K. Nath, N. C. Das, “Physico-mechanical, rheological and gas barrier properties of organoclay and inorganic phyllosilicate reinforced thermoplastic films”, J. Applied Polymer Science, 138 (4) 49735 (2020).

   86. S. Ganguly, P. Das, T. K. Das, S. Ghosh, S. Das, M. Bose, M. Mondal, A. K. Das, N. C. Das, “Acoustic cavitation assisted destratified clay tactoid reinforced in situ elastomer-mimetic semi-IPN hydrogel for catalytic and bactericidal application”, Ultrasonic Sonochemistry, 60, 104797 (2020).

   87. S. Ghosh, S. Ganguly, A. Maruthi, S. Jana, S. Remanan, P. Das, T. K. Das, S. Ghosh, N. C. Das, “Micro-computed tomography enhanced cross-linked carboxylated acrylonitrile butadiene rubber with the decoration of new generation conductive carbon black for high strain tolerant electromagnetic wave absorber”, Materials Today Communications, 20, 100989 (2020).

   88.  S. Ganguly, S. Ghosh, P. Das, T. K Das, S. K. Ghosh, N. C. Das, “Poly (N‑vinylpyrrolidone)‑ stabilized colloidal graphene‑reinforced poly(ethylene‑co‑methyl acrylate) to mitigate electromagnetic radiation pollution”, Polymer Bulletin, 77, 2923 (2020).

   89.  S. Remanan, S. Ghosh, T. K. Das, N. C. Das, “Nano to microblend formation in poly(ethylene-co-methyl acrylate)/ poly(vinylidene fluoride) blend and investigation of its anomalies in rheological properties”, Nano-Structures & Nano-Objects, 27, 100487 (2020).

   90. T. K. Das, S. Ganguly, S. Remanan, S. Ghosh, N. C. Das, “Mussel-Inspired Ag/ Poly(Norepinephrine)/MnO2 Heterogeneous Nanocatalyst for Efficient Reduction of 4-Nitrophenol and 4-Nitroaniline: An Alternative Approach”, Research on Chemical Intermediates 46 (7), 3629-3650 (2020).

   91.  P. Ghosh, K. Naskar, N. C. Das, “Influence of synthetic graphite powder on tribological and thermo-mechanical properties of organic-inorganic hybrid fiber reinforced elastomer-modified phenolic resin friction composites,” Composites Part C, 2, 100018 (2020).

   92. S. Remanan, S. Ghosh, T.K. Das, M. Sharma, M. Bose, S. Bose, A.K. Das, N. C. Das, “Gradient crystallinity and its influence on the poly(vinylidene fluoride)/poly(methyl methacrylate) membrane derived by immersion precipitation method”, J. Applied Polymer Science, 137 (27), 48677 (2020).

   93. S. Remanan, N. Padmavathy, S. Ghosh, S. Mondal, S. Bose, N. C. Das, “Porous graphene-based membranes: preparation and properties of a unique two-dimensional nanomaterial membrane for water purification”, Separation & Purification Reviews, 50(3), 262-282 (2021).

   94. R. Ravindren, S. Mondal, K. Nath, N. C. Das, “Prediction of electrical conductivity, double percolation limit and electromagnetic interference shielding effectiveness of copper nanowire filled flexible polymer blend nanocomposites”, Composites Part B 164, 559-569 (2019).

   95. R. Ravindren, S. Mondal, K. Nath, N. C. Das, “Investigation of electrical conductivity and electromagnetic interference shielding effectiveness of preferentially distributed conductive filler in highly flexible polymer blends nanocomposites”,  Composites Part A 118, 75-89 (2019).

   96. S. Subhadarshini, R. Singh, D. K. Goswami, A. K. Das, N. C. Das, “Electrodeposited Cu2O nanopetal architecture as a superhydrophobic and antibacterial surface”, Langmuir, 25, 52, 17166-17176 (2019).

   97. S. Remanan, S. Ghosh, T. K. Das, M. Sharma, M. Bose, S. Bose, A. K. Das, N. C. Das, “Gradient crystallinity and its influence on the poly(vinylidene fluoride)/poly(methyl methacrylate) membrane derived by immersion precipitation method”, J. Applied Polymer Science 137, 48677 (2019).

   98. T. K. Das, S. Ganguly, S. Ghosh, S. Remanan, S. K. Ghosh, N. C. Das, “In-situ synthesis of magnetic nanoparticle immobilized heterogeneous catalyst through mussel mimetic approach for the efficient removal of water pollutants”,  Colloid and Interface Science Communications 33, 100218 (2019).

   99. S. Ghosh, P. Das, S. Ganguly, S. Remanan, T. K. Das, S. K. Bhattacharyya, J. Baral, A. K. Das, T. Laha, N. C. Das, “3D‐Enhanced, High‐Performing, Super‐hydrophobic and Electromagnetic Interference Shielding Fabrics Based on Silver Paint and Their Use in Antibacterial Applications”, Chemistry Select, 4(40) 11748-11754 (2019).

   100. S. Ganguly, P. Das, S. Banerjee, N. C. Das, “Advancement in science and technology of carbon dots-polymer hybrid composites: a review”, Functional Composites and Structures, 1(2), 022001 (2019).

   101. 35.  S. Remanan, N. C. Das, “A unique Microfiltration membrane derived from the poly (ethylene-co-methyl acrylate)/Poly (vinylidene fluoride)(EMA/PVDF) biphasic blends and surface modification for antifouling application”, Polymer Testing, 79, 106031 (2019)

   102. P. Das, S. Ganguly, T. Agarwal, P. P. Maity, S. Ghosh, S. Choudhary, S. Gangopadhyay, T.K. Maiti, S. Dhara, S. Banerjee, N. C. Das, “Heteroatom doped blue luminescent carbon dots as a nano-probe for targeted cell labeling and anticancer drug delivery vehicle”,  Materials Chemistry and Physics, 237, 121860 (2019).

   103. P. Das, S. Ganguly, P. P. Maity, H. K Srivastava, M. Bose, S. Dhara, S. Bandyopadhyay, A. K. Das, S. Banerjee, N. C. Das, “Converting waste Allium sativum peel to nitrogen and sulphur co-doped photoluminescence carbon dots for solar conversion, cell labeling, and photobleaching diligences: A path from discarded waste to value-added products”, Journal of Photochemistry and Photobiology B: Biology, 197, 111545 (2019).

   104. S. Ganguly, P. Das, S. Das, U. Ghorai, M. Bose, S. Ghosh, S. Mondal, A. K. Das, S. Banerjee, N. C. Das, “Microwave assisted green synthesis of Zwitterionic photolumenescent N-doped carbon dots: An efficient ‘on-off’chemosensor for tracer Cr (+ 6) considering the inner filter effect and nano drug-delivery vector”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 579, 123604 (2019).

   105. S. Ghosh, S. Ganguly, S. Remanan, N. C. Das, “Fabrication and investigation of 3D tuned PEG/PEDOT: PSS treated conductive and durable cotton fabric for superior electrical conductivity and flexible electromagnetic interference shielding”, Composites Science and Technology, 181(8) 107682 (2019).

   106. P. Bhawal, S. Ganguly, T. K. Das, S. Mondal, L. Nayak, N. C. Das, “A comparative study of physico-mechanical and electrical properties of polymer-carbon nanofiber in wet and melt mixing methods”, Materials Science and Engineering: B 245, 95-106 (2019).

   107. S. Ghosh, S. Ganguly, P. Das, T. K. Das, M Bose, A. K. Das, N. C. Das, “Fabrication of Reduced Graphene Oxide/Silver Nanoparticles Decorated Conductive Cotton Fabric for High Performing Electromagnetic Interference Shielding and Antibacterial applications”, Fiber and Polymers, 20 (3), 1161-1171 (2019).

   108. P. P. Maity, D. Dutta, S. Ganguly, K. Kapat, K. Dixit, A. Roy Chowdhury, R. Samanta, N. C. Das, P. Datta, A. K. Das, S. Dhara, “Isolation and mass spectrometry based hydroxyproline mapping of type II collagen derived from Capra hircus ear cartilage”, Communications Biology, 2, Article No. 146 (2019).

   109. S. Samantarai, A. Nag, N. Singh, D. Dash, A. Basak, G. B. Nando, N. C. Das, “Cardanol Functionalized Carboxylated Acrylonitrile Butadiene Rubber for Better Processability, Technical Properties and Biocompatibility”, J. Polymer Environment, 27 (9), 1878–1896 (2019).

   110. P. Das, S. Ganguly, S. Banerjee, N. C. Das, “Graphene based emergent nanolights: A short review on the synthesis, properties and application”, Research on Chemical Intermediates, 45 (7), 3823–3853 (2019)

   111. P. Das, P. P. Maity, S. Ganguly, S. Ghosh, J. Baral, M. Bose, S. Chudhary, S. Gangopadhyay, S. Dhara, A. K Das, S. Banerjee, N. C Das, “Biocompatible carbon dots derived from κ-carrageenan and phenyl boronic acid for dual modality sensing platform of sugar and its anti-diabetic drug release behavior”, Int. J. of Biological Macromolecules, 132, 316-329 (2019).

   112. S. Remanan, M. Bose, A. K. Das, N. C. Das, “Preparation and characterization of a unique low‐cost microfiltration membrane from a technologically compatible poly (ethylene‐co‐methyl acrylate)/poly (vinylidene fluoride) blend for water filtration application”, J. Applied Polymer Science, 135, 47218 (2019).

   113. P. Das, S. Ganguly, M. Bose, D. Debes Ray, S. Ghosh, S. Mondal, V. K. Aswal, A. K. Das, S. Banerjee, N. C. Das, “Surface quaternized nanosensor as an one-arrow-two-hawks approach for fluorescence turns “on-off-on” bifunctional sensing and antibacterial activity”, New Journal of Chemistry, 43, 6205-6219 (2019).

   114. R. Ravindren, S. Mondal, P. Bhawal, Sk. Mahammad Nasim Ali,  N. C. Das, “Superior electromagnetic interference shielding effectiveness and low percolation threshold through the preferential distribution of carbon black in the highly flexible polymer blend composites”, Polymer Composites, 40(4), 1404 (2019).

   115. R. Ravindren, S. Mondal, K. Nath, N. C. Das, “Synergistic effect of double percolated co-supportive MWCNT-CB conductive network for high performance EMI shielding application”, Polymers Advanced Technologies, 30 (6), 1506-1517 (2019).

   116. T. K. Das, S. Ganguly, S. Remanan, N. C. Das, “Temperature Dependent Study of Catalytic Ag Nanoparticles Entrapped Resin Nanocomposite towards Reduction of 4-Nitrophenol”, Chemistry Select, 4 (13), 3665-3671 (2019).

   117. T. K. Das, P. Bhawal, S. Ganguly, S. Mondal, S. Remanan, S. Ghosh, N. C. Das, “Synthesis of hydroxyapatite nanorods and its use as a nano-reinforcement block for ethylene methacrylate copolymer matrix”, Polymer Bulletin, 76(7), 3621-3642 (2019).

   118. T. K. Das, P. Ghosh, N. C. Das, “Preparation, development, outcomes, and application versatility of carbon fiber-based polymer composites: a review”, Advanced Composites and Hybrid Materials, 2, 214-233 (2019).

   119. S. Samantarai, A. Nag, N. Singh, D. Dash, G. B. Nando, N. C. Das, “Physico-mechanical and dynamic mechanical properties of meta-pentadecenyl phenol functionalized acrylonitrile–butadiene rubber nanoclay composites”, Rubber Chemistry & Technology, 92(3), 496-512  (2019).

   120.  S. Ganguly, S. Mondal, P. Das, P. Bhawal, T. K. Das, S. Ghosh, .S Remanan, N. C. Das, “An insight into the physico-mechanical signatures of silylated graphene oxide in poly(ethylene methyl acrylate) copolymeric thermoplastic matrix”, Macromolecular Research, 279(3), 268-281(2019).

   121. P. Bhawal, S. Das, T. K. Ganguly, S. Mondal, N. C. Das, “Selective cross‑linking of carboxylated acrylonitrile butadiene rubber and study of their technological compatibility with poly(ethylene‑ co ‑methyl acrlylate) by means of mechanical, thermal, and chemical analysis”, Polymer Bulletin, 76(4), 1877 (2019).

   122. S. Samantari, A. Nag, N. Singh, D. Dash, A. Basak, G. B. Nando, N. C. Das, “Chemical modification of nitrile rubber in the latex stage by functionalizing phosphorylated cardanol prepolymer: A bio-based plasticizer and a renewable resource”, J. Elastomer and Plastics, 51(2), 99 (2019).

   123. S. Ganguly, P. Das, P. Mait, S. Mondal, S. Ghosh, S. Dhara, N.C. Das, “Green Reduced Graphene Oxide Toughened Semi-IPN Monolith Hydrogel as Dual Responsive Drug Release System: Rheological, Physico-Mechanical and Electrical Evaluations”, J. Physical Chemistry B 122 (29), 7201 (2018).

   124. T. K. Das, S. Ganguly, P. Bhawal, S. Remanan, S. Ghosh, N. C. Das, “A facile green synthesis of silver nanoparticles decorated silica nanocomposites using mussel inspired polydopamine chemistry and assessment its catalytic activity”, J. Environmental Chemical Engineering 6 (6), 6989 (2018).

   125. T. K. Das, P. Bhawal, S. Ganguly, S. Mondal, N. C. Das, “A facile green synthesis of amino acid boosted Ag decorated reduced graphene oxide nanocomposites and its catalytic activity towards 4-nitrophenol reduction”, Surfaces and Interfaces, 13, 79 (2018).

   126.  P. Das, S. Ganguly, S. Mondal, U. K Ghorai,  P. P Maity, S. Choudhary, S. Dhara, S .Banerjee, N. C. Das, “Dual doped biocompatible multicolor luminescent carbon dots for bio labeling, UV-active marker and fluorescent polymer composite”,  Luminescence 33 (6), 1136 (2018).

   127. S. Ganguly, P. Bhawal, R. Ravindren, N. C. Das, “Polymer nanocomposites for electromagnetic interference shielding: a review”, J. Nanoscience and Nanotechnology, 18, 7641 (2018).

   128. P. Manoharan, M. G. Anagha, N. C. Das, K. Naskar, “Influence of different specific surface area of highly dispersible silica and interfacial characteristics of green elastomer composites”, Rubber Chemistry and Technology, 91(3), 548 (2018).

   129. S. Ganguly, P. Maity, S. Mondal, P. Das, P. Bhawal, S. Dhara, N. C. Das, “Polysaccharide and poly(methacrylic acid) based biodegradable elastomeric biocompatible semi-IPN hydrogel for controlled drug delivery”, Materials Science and Engineering C 92, 34 (2018).

   130. V. Venudharan, K. P Biligiri, N. C. Das, “Investigations on behavioral characteristics of asphalt binder with crumb rubber modification: Rheological and thermo-chemical approach”, Construction and Building Materials, 181, 455 (2018).

   131. P. Das, S. Ganguly, M. Bose, S. Mondal, S. Choudhary, S. Gangopadhyay, A. K. Das, S. Banerjee, N.  C. Das, “Zinc and nitrogen ornamented bluish white luminescent carbon dots for engrossing bacteriostatic activity and Fenton based bio-sensor”, Materials Science and Engineering: C 88, 115 (2018).

   132. S. Mondal, T. K. Das, P. Das, R. Ravindren, S. Sit, S. Ghosh, N. C. Das, “Oxygen Permeability Properties of Ethylene Methyl Acrylate/Sepiolite Clay Composites with Enhanced Mechanical and Thermal Performance”, J. Polymer Science & Applications, 2, 1 (2018).

   133.  S. Ghosh, S. Mondal, S. Ganguly, S. Remanan, N. Singha, N. C. Das, “Carbon nanostructured based mechanically robust conductive cotton fabric for improved electromagnetic interference shielding”, Fibers and Polymers, 19 (5), 1064-1073 (2018).

   134. S. Ganguly, S. Mondal, P. Das, P. Bhawal, T. K. Das, M. Bose, S. Choudhary, S. Gangopadhyay, A. K. Das, N. C. Das, “Natural saponin stabilized nano-catalyst as efficient dye-degradation catalyst”, Nano-Structures & Nano-Objects, 16, 86 (2018).

   135. S. Ghosh, N. K.  Singha, N. C. Das, “Ultra-light weight, water durable and flexible highly electrical conductive polyurethane foam for superior electromagnetic interference shielding materials”, J. Materials Science: Materials in Electronics, 19(12), 10177 (2018).

   136.  S. Ghosh, S. Remanan, S. Mondal, S. Ganguly, P. Das, N. Singha, N. C. Das, “An approach to prepare mechanically robust full IPN strengthened conductive cotton fabric for high strain tolerant electromagnetic interference shielding”, Chemical Engineering Journal, 334, 138 (2018).

   137. P. Das, S. Ganguly, M. Bose, A. K. Das, S. Banerjee, N. C. Das, “Heteroatom doped photoluminescent carbon dots for sensitive detection of acetone in human fluids”, Sensors and Actuators B: Chemical, 266, 583 (2018).

   138.  S. Ganguly, D. Ray, P. Das, P. P. Maity, S.  Mondal, V. K.  Aswal, S. Dhara, N. C. Das, “Mechanically robust dual responsive water dispersible-graphene based conductive elastomeric hydrogel for tunable pulsatile drug release”, Ultrasonic Sonochemistry, 42, 212 (2018).

   139. S. Mondal, P. Das, S Ganguly, R. Ravindren, S. Remanan, P. Bhawal, T. K. Das, N. C. Das, “Thermal-air ageing treatment on mechanical, electrical, and electromagnetic interference shielding properties of lightweight carbon nanotube based polymer nanocomposites”, Composites Part A: Applied Science and Manufacturing, 107, 447 (2018).

   140. P. Das, S. Ganguly, P. Maity, M. Bose, S. Mondal, S. Dhara, A. K. Das, S. Banerjee, N. C. Das, “Waste chimney oil to nanolights: A low cost chemosensor for tracer metal detection in practical field and its polymer composite for multidimensional activity”, J. Photochemistry & Photobiology, B: Biology, 180, 56 (2018).

   141. T. K. Das, S. Ganguly, P. Bhawal, S. Remanan, S. Mondal, N. C. Das, “Mussel inspired green synthesis of silver nanoparticles decorated halloysite nanocomposites using dopamine: characterization and evaluation its catalytic activity”, Applied Nanoscience, 8(1&2), 173 (2018).

   142.  S. Ganguly, N. C. Das, “Design of psyllium-g-poly(acrylic acid-co-sodium acrylate)/cloisite 10A semi-IPN nanocomposite hydrogel and its mechanical, rheological and controlled drug release behavior”, Int. J. Biological Macromolecules, 111, 983 (2018).

   143. R. Remanan, M. Sharma, S. Bose, N. C. Das, “Recent advances in preparation of porous polymeric membranes by unique techniques and mitigation of fouling through surface modification”, Chemistry Select, 3(2), 609 (2018).

   144. P. Bhawal, S. Ganguly, T. K. Das, S. Mondal, N. C. Das, “Mechanically robust conductive carbon clusters confined ethylene methyl acrylate–based flexible composites for superior shielding effectiveness”, Polymers Advanced Technologies, 29 (1), 95 (2018).

   145. T. K. Das, S. Ganguly, P. Bhawal, S. Mondal, N. C. Das, “A facile green synthesis of silver nanoparticle-decorated hydroxyapatite for efficient catalytic activity towards 4-nitrophenol reduction”,  Research on Chemical Intermediates, 44 (2), 11089 (2018).

   146. P. Bhawal, S. Ganguly, T. K. Das, S. Mondal, S. Choudhury, N. C. Das, “Superior electromagnetic interference shielding effectiveness and electro-mechanical properties of EMA-IRGO nanocomposites through the in-situ reduction of GO from melt blended EMA-GO composites”, Composites Part B: Engineering, 134, 46 (2018).

   147. S. Samantarai, D. Mahata, A. Nag, G. B. Nando, N. C. Das, “Functionalization of acrylonitrile butadiene rubber with meta-pentadecenyl phenol, a multifunctional additive and a renewable resource”, Rubber Chemistry and Technology, 90(4) 683 (2017).

   148.  P. Manoharan, N. C. Das, K. Naskar, “On‐demand tuned hazard free elastomeric composites: A green approach”, Biopolymers, 107 (7) (2017).

   149. S. Mondal, S. Ganguly, P. Das, D Khastgir, N. C. Das, “Low percolation threshold and electromagnetic shielding effectiveness of nano-structured carbon based ethylene methyl acrylate nanocomposites”, Composites Part B: Engineering, 119, 41 (2017).

   150. P. Bhawal, T. K. Das, S. Ganguly, S. Mondal, R. Ravindren, N. C. Das, “Fabrication of Light Weight Mechanically Robust Short Carbon Fiber/Ethylene Methyl Acrylate Polymeric Nanocomposite for Effective Electromagnetic Interference Shielding”, J. Polymer Science and Applications, 1 (1) (2017).

   151. S. Ganguly, P. Bhawal, A. Choudhury, S. Mondal, P. Das, N. C. Das, “Preparation and properties of Halloysite nanotubes/poly(ethylene methyl acrylate) based nanocomposites by variation of mixing method”, Polymer-Plastics Technology and Engineering, 57 (10), 997 (2018).

   152. S. Mondal, S. Ganguly, Poushali Das, P. Bhawal, T. K. Das, L Nayak, D. Khastgir, N. C Das, “High-performance carbon nanofiber coated cellulose filter paper for electromagnetic interference shielding”, Cellulose, 24 (11), 5117 (2017).

   153. S. Mondal, S. Ganguly, P. Das , P. Bhawal, T. K. Das, R. Ravindren, S. Ghosh, N. C. Das, “Effect of thermal-air ageing treatment on mechanical properties and electromagnetic interference shielding effectiveness of low-cost nano-structured carbon filled chlorinated polyethylene”,  Materials Science and Engineering B, 255, 140 (2017).

   154. S. Ganguly, P. Das, M. Bose, S. Mondal, A. K. Das, N. C. Das, “Strongly blue-luminescent N-doped carbogenic dots as a tracer metal sensing probe in aqueous medium and its potential activity towards in situ Ag-nanoparticle synthesis”, Sensors and Actuators B-Chemical, 252, 735 (2017).

   155. S. Ganguly, P. Das, M. Bose, T. K. Das, S. Mondal, A. K. Das, N. C. Das, “Sonochemical green reduction to prepare Ag nanoparticles decorated graphene sheets for catalytic performance and antibacterial application”, Ultrasonics Sonochemistry,  39, 577 (2017).

   156. P. Manoharan, N. C. Das, K. Naskar, “On-demand tuned hazard free elastomeric composites: A green approach”, 107, 7, e23019 (2017)

   157. P. Das, M. Bose, S. Ganguly, S. Mondal, A. K. Das, S. Banerjee, N. C. Das, “Green avenue to photoluminescent carbon dots for imaging of gram-negative bacteria Escherichia coli”, Nanotechnology, 28, 19, 195501 (2017).

   158. P. Das, S. Ganguly, M. Bose, S. Mondal, A. K. Das, S. Banerjee, N. C. Das, “A simplistic approach to green future with eco-friendly luminescence carbon dots and their application to fluorescence nano-sensor ‘turn-off’ probe for selective sensing of copper ions”, Materials Science and Engineering C, 75, 1456 (2017).

   159. S. Ganguly, N. C. Das, “Water Uptake Kinetics and Control Release of Agrochemical Fertilizers from Nanoclay-Assisted Semi-interpenetrating Sodium Acrylate-Based Hydrogel”, Polymer-Plastics Technology and Engineering, 56, 744 (2017).

   160. S. Ganguly, T. Maity, S. Mondal, P. Das, N. C. Das, “Starch functionalized biodegradable semi-IPN as a pH-tunable controlled release platform for memantine”, Int. J. of Biological Macromolecules, 95, 185 (2017).

   161. S. Mondal, L. Nayak, M. Rahaman, Ali Aldalbahi, T. K. Chaki, D. Khastgir, N. C. Das, “An effective strategy to enhance mechanical, electrical, and electromagnetic shielding effectiveness of chlorinated polyethylene-carbon nanofiber nanocomposites”, Composites Part B: Engineering, 109, 155 (2017).

   162. S. Mondal, S. Ganguly, M. Rahaman, Ali Aldalbahi, T. K. Chaki, D. Khastgir, N. C. Das, “A strategy to achieve enhanced electromagnetic interference shielding at low concentration with a new generation of conductive carbon black in a chlorinated polyethylene elastomeric matrix,” Physical Chemistry Chemical Physics, 18, 24591 (2016).

   163. S. Ganguly, T. K. Das, S. Mondal, N. C. Das, “Synthesis of polydopamine coated halloysite nanotubes based hydrogel for controlled release of a calcium channel blocker”, RSC Advances, 6, 105350 (2016).

   164. R. Gogoi, K. P. Biligiri, N. C. Das, “Performance prediction analyses of styrene-butadiene rubber and crumb rubber materials in asphalt road applications”, Materials and Structures, 49(9), 3479 (2016).

   165. P. Bhawal, S. Ganguly, T. K. Chaki, N. C. Das, “Synthesis and characterization of graphene oxide filled ethylene methyl acrylate hybrid nanocomposites” RSC Advances 6 (25), 20781 (2016).

   166. S. Ganguly, N. C. Das, “A comparison on self-seeding and isothermal crystallization of polyethylene in solution using small angle neutron scattering”, Polymer, 61, 192 (2015).

   167. S. Ganguly, N. C. Das, “Synthesis of a novel pH responsive phyllosilicate loaded polymeric hydrogel based on poly(acrylic acid-co-N-vinylpyrrolidone) and polyethylene glycol for drug delivery: modelling and kinetics study for the sustained release of an antibiotic drug”, RSC Advances, 5, 18312 (2015).

   168. N. C. Das, “Phase behavior and phase separation kinetics of polymer blends”, Journal of Microscopy, 253, 198 (2014).

   169. T.R. Prisk, N. C. Das, S.O. Diallo, N. Wada, S. Inagaki, and P.E. Sokol, “Collective excitations of superfluid helium confined in 2.8 nm pores”, Physical Review B, 88 (1), 014521 (2013).

   170. N. C. Das, H. Cao, H. Kaiser, J. Gladden,  P. E. Sokol, “Shape and size of highly concentrated micelles in CTAB/NaSal solution by small angle neutron scattering (SANS)”, Langmuir, 28, 11962 (2012).

   171. P. K. Chattopadhyay, S. Praveen, N. C. Das, S. Chattopadhyay, “Contribution of organomodified clay on hybrid microstructures and properties of epoxidized natural rubber-based nanocomposites”,  Polymer Engineering and Science, 53, 923 (2013).

   172.  Peng Ni, Z. Wang, X. Ma, N. C. Das, P. E. Sokol, W. Chiu, B. Dragnea, M. Hagan, C. Cheng Kao, “An examination of the electrostatic interactions between the N-terminal tail of the brome mosai virus coat protein and encapsidated RNAs”, J. Molecular Biology, 419, 284 (2012).

   173. N. C. Das, S. Biswas, P.E. Sokol, “The photovoltaic performance of Zinc Oxide nanorod in bulk heterojunction solar cells”, J. Renewable and Sustainable Energy, 3, 033105 (2011).

   174. P.K. Chattopadhyay, N. C. Das, S. Chattopadhyay, “Influence of interfacial roughness and the hybrid filler microstructures on the properties of ternary elastomeric composites”, Composites Part A, 42, 1049 (2011).

   175. M. Mondal, P.K. Chattopadhyay, D. Setua, N. C. Das, S. Chattopadhyay, “Influence of surface modified nanoclay in self-organized nanostructure of segmented polyurethane composites” Polymer International, 60, 1364 (2011).

   176. N. C. Das, Z. Wang, Y. Liu, K. Yang, H. Wang, P.E. Sokol, “Quantitative characterization of vertically aligned nanotubes array using small X-ray scattering”, J. Nanoscience and Nanotechnology, 11, 4995 (2011).

   177. P. K. Chattopadhyay, S. Chattopadhyay, N. C. Das, P.P. Bondyopadhyay, “Impact of carbon black substitution with nanoclay on microstructure and tribological properties of ternary elastomeric composites”, Materials and Design 32, 4696 (2011).

   178. M. Mondal, P. K. Chattopadhyay, D. K. Setua, N. C. Das, S. Chattopadhyay, “Self-organization of macromolecules in novel TPU-clay nanocomposites”, Advanced Materials Research, 123-125, 435 (2010).

   179. N. C. Das, P.E.Sokol, “Polymer and ZnO nanoparticles composites for hybrid photovoltaic devices”, Renewable Energy, 35, 2683 (2010).

   180. N. C. Das, S. Upreti, P.E. Sokol, “Small angle neutron scattering and photoluminescence property of wet chemistry process synthesized ZnO nanoparticles”, J. Experimental Nanoscience, 5(2), 180 (2010).

   181. Mott, J. Yin, M. Engelhard, R. Loukrakpam, P. Chang, G. Miller, In-Tae Bae, N. C. Das, C. Wang, C.J. Zhong, “From ultrafine thiolate-capped copper nanoclusters toward copper sulfide nanodiscs: a thermally-activated evolution route”, Chemistry of Materials, 22, 261 (2010).

   182. N. C. Das, Y. Yang, K. Yang, W. Peng, S. Maiti, H. Wang, “Single-walled carbon nanotube/ poly(methyl methacrylate) composites for electromagnetic interference shielding”, Polymer Engineering and Science, 49, 1627 (2009).

   183. J. Zhang, A. Kumbhar, J. He, N. C. Das, K. Yang, J.Q. Wang, H. Wang, K.L. Stokes, J. Fang, “Simple cubic super crystals containing PbTe nanocubes and their core-shell building blocks”, J. American Chemical Society, 130, 15203 (2008).

   184. N. C. Das, S.Maiti, “Electromagnetic interference shielding effectiveness of single-walled carbon nanotube/ethylene-vinyl acetate composites”, J. Materials Science, 43, 1920 (2008).

   185. N. C. Das, M. Hikosaka, K. Okada, A. Toda, Katsuaki Inoue, “Nucleation and size distribution of nano nucleus during induction period of crystallization of polymers”, J. Chemical Physics, 123, 204906 (2005).

   186. N. C. Das, H. Wang, J. Mewis, P. Moldenaers, “Rheology and microstructure formation of immiscible model polymer blends under steady and transients flows”, J. Polymer Science Part B: Polymer Physics, 43, 3519 (2005).

   187. N. C. Das, S. Yamazaki, M. Hikosaka, T. K. Chaki, D. Khastgir, A. Chakraborty, “Electromagnetic interference shielding effectiveness of polyaniline-ethylene vinyl acetate composites”, Polymer International, 54, 256 (2005).

   188. M. Hikosaka, S. Yamazaki, I. Wataoka, N. C. Das, K. Okada, A. Toda, “Direct evidence of nucleation during the induction period of polyethylene by SAXS”, J. Macromolecular Science: Part B-Physics, B42 (3&4), 847 (2003).

   189. N. C. Das, T. K. Chaki, D. Khastgir, “Effect of filler treatment and crosslinking on Mechanical, Dynamic mechanical and Electrical conductivity of conductive composites from carbon black filled Ethylene-vinyl acetate copolymer”, J. Applied Polymer Science, 90 (8), 2073 (2003).

   190. N. C. Das, T. K. Chaki, D. Khastgir, “Effect axial stretching on electrical resistivity of carbon black and short carbon fibre filled conductive rubber composites”, Polymer International, 51(2), 156 (2002).

   191. N. C. Das, T. K. Chaki, D. Khastgir, “Effect of processing parameters, applied pressure and temperature on electrical resistivity of rubber based conductive composites”, Carbon 40(6), 807 (2002).

   192. N. C. Das, T. K. Chaki, D. Khastgir, “Carbon fibre filled conductive composites based on EVA, EPDM and their Blends”, J. Polymer Engineering, 22 (2), 115 (2002).

   193. N. C. Das, T. K. Chaki, D. Khastgir, “Electrical and mechanical properties of conductive carbon black filled EVA, EPDM and their blends”, Kautschuk Gummi Kunststoffe, 55 (6), 300 (2002).

   194. N. C. Das, T. K. Chaki, D. Khastgir, A. Chakraborty, “Electromagnetic interference shielding effectiveness of hybrid conductive polymer composite”, J. Elastomers and Plastics, 34 (3), 199 (2002).

   195. N. C. Das, T. K. Chaki, D. Khastgir, A. Chakraborty, “Electromagnetic interference shielding effectiveness of ethylene vinyl acetate based conductive composites containing carbon fillers”, J. Applied Polymer Science, 80(10), 1601 (2001).

   196. N. C. Das, T. K. Chaki, D. Khastgir, “Conductive rubbers made by adding conductive carbon black to EVA, EPDM and EVA-EPDM blends” Plastics, Rubber and Composites, 30(4), 126 (2001).

   197. N. C. Das, T. K. Chaki, D. Khastgir, A. Chakraborty, “Electromagnetic interference shielding effectiveness of conductive carbon black and carbon fibre filled composites based on rubber and rubber blends”, Advances in Polymer Technology, 20 (3), 226 (2001).

   198. N. C. Das, T. K. Chaki, D. Khastgir, A. Chakraborty, “Electromagnetic interference shielding effectiveness of carbon black and carbon fibre filled EVA and NR based composites”, Composites Part A: Applied Science and Manufacturing, 31, 1069 (2000).

   199. N. C. Das, T. K. Chaki, D. Khastgir, A. Chakraborty, “Effect of filler blend composition on the electrical and mechanical properties of conductive EVA based composites”, Polymer and Polymer Composites, 8(6), 395 (2000).

PROCEEDINGS AND PRESENTATIONS (International and National)

1. N. C. Das, “Recycling of Waste Rubber through Pyrolysis and Devulcanization Processes to Promote Circular Economy”, Workshop on Sustainable Horizons: Exploring Carbon Capture and Valorization” in Indo-German Science and Technology Centre (IGSTC), IIT Kharagpur, India, February 19-20, 2025 (Keynote Speaker).

2. N. C. Das, "“Small angle X-ray scattering technique for characterization of rubber compounds in tyre and non-tyre applications”, International Rubber Conference (IRC) 2022, Bengaluru, Karnataka, November 23-26, 2022 (Invited Lecture).

3. N. C. Das, “Polymeric nanocomposites for radiation shielding: a major challenge to control environmental pollution and health hazards”,  International Conference on Macromolecule (ICM-2021),  Kottayam, Kerala, India, September 10-12, 2021 (Plenary Lecture).

4. N. C. Das, “Tyre Technology: Basic component, manufacturing, design & development”, Refresher Course in Chemistry, UGC-Human Resource Development Centre, Kumaun University, Nainital, February 15-28, 2021 (Invited lecture)

5. N. C. Das, “Small angle Scattering (X-ray & Neutron) for characterization of nano-structure materials and soft materials”, Refresher Course in Chemistry, UGC-Human Resource Development Centre, Kumaun University, Nainital, February 15-28, 2021 (Invited lecture).

6. N. C. Das, “Polymeric materials for radiation shielding: a major challenge to reduce environment pollution and protect our health”, Occupational Health & Environment Management towards Sustainable growth, Jadavpur University & Vivekananda Institute of Environment & Management, Kolkata, December 7-14, 2020 (Invited lecture).

7. N. C. Das, “Polymeric nanocomposites/nanomaterials for electromagnetic radiation shielding: a major challenge of environment pollution to health protection”, International Conference in Nanotechnology for Better Living (ICNBAL 2019), NIT Srinagar, April 12-16, 2019 (Keynote lecture).

8. S. Ghosh, N. C. Das, “ An approach to fabricate mechanically robust full IPN strengthened conductive cotton fabric for high strain tolerant electromagnetic wave absorber ” (Oral Presentation) 194th Technical Meeting, International Elastomer Conference, Rubber Division (American Chemical Society) Kentucky International Convention Center, Louisville, USA, October 9-11, 2018. 

9. S. Remanan, N. C. Das, “Preparation and characterization of a unique microfiltration membrane derived from poly(ethylene-co-methyl acrylate)/poly(vinylidiene fluoride) blend” 194th Technical Meeting, International Elastomer Conference, Rubber Division (American Chemical Society) Kentucky International Convention Center, Louisville, USA, October 9-11, 2018.  

10. S. Remanan, N. C. Das, “A unique porous membrane derived from the technologically compatible poly(ethylene-co-methyl acrylate)/poly(vinylidiene fluoride) biphasic blend and surface modification for water remediation”, The 6th IWA-Regional Membrane Technology Conference The Maharaja Sayajirao University of Baroda, Gujarat, India, December 10-12, 2018

11. S. Remanan, N. C. Das, “Gradient crystallinity and it influence on membrane properties derived from the PVDF/PMMA blend by non-solvent induced phase separation”, 3rd international conference on Soft materials, Malaviya National Institute of Technology, Jaipur, Rajasthan, India, December 9-14, 2018.

12. Poushali Das, Susanta Banerjee, N. C. Das, “Waste derived carbon dots as a cost-effective chemosensor for tracer metal detection and living cell assay”, EMRS Spring Meeting 2018, Strasbourg, France, June 18-22, 2018.

13. S. Ganguly, N. C. Das, “Carbon dots aided sonochemical reduction to prepare silver nanoparticle/RGO and its catalytic and antibacterial applications” Poster presentation, EMRS, 2018 Spring Meeting, Strasbourg, France, June 17-22, 2018.

14. P. Bhawal, N.C. Das, "An insight into the carbon nanofiber filled ethylene methyl acrylate flexible hybrid nanocomposites to unveil its superior electromagnetic interference shielding effectiveness", International conference on current trends in materials science and engineering, Kolkata, India, January 19-20, 2018.

15. N. C. Das, “Advanced polymer nanocomposites for EMI shielding applications”, June 18-23, ICMAT 2017, Singapore (Invited talk)

16. S. Ganguly, N. C. Das, “Synthesis of polydopamine coated halloysite nanotubes impregnated biopolymer based hydrogel for controlled drug release platform” (Oral) 25th POLYCHAR 2017, Kuala Lumpur, Malaysia, October 9-13, 2017.

17. P. Bhawal, N.C. Das, "Graphene oxide in flexible elastomeric phase: An insight to dispersion and effect of its mechanical enduringness", International Conference on Advancements in Polymeric Materials”, Bengaluru, India, February 11-13, 2017.

18. P. Das, M. Bose, A. K. Das, S. Banerjee, N. C. Das, “One-step green synthesis of fluorescent carbon dots from biowaste for bio-labeling assay”, 25th Polychar 2017, Kuala Lumpur, Malaysia, October 9-13, 2017.

19. N. C. Das, S. Ganguly, “SAXS and SANS study of nano and macromolecules” at International Conference on Energy, Functional Materials And Nanotechnology (ICEFN-2016), Kumaun University, Nainital, Uttarakhand, India, March 26-29, 2016 (Invited talk).

20. S. Ganguly, N. C. Das, “Synthesis of a novel pH responsive phyllosilicate loaded polymeric hydrogel based on poly (acrylic acid-co-N-vinylpyrrolidone) and polyethylene glycol: Modelling and kinetics study for sustained release of antibiotic drug” Poster presentation, MACRO 2015; International symposium on polymer science and technology, IACS, Kolkata, India, January 23-26, 2015.

21. N. C. Das, “Application of small angle scattering for soft materials” International Symposium on Polymer Science and Technology, Macro 2015, Kolkata, India, January 23-25, 2015. (Invited talk)

22. S. Ghosh, N. Singha, N.C. Das, “Fabrication of high strength and electrically conductive smart fabrics”, International Conference on Functional Materials, Materials Science Centre, IIT Kharagpur, India, December 12-14, 2016.

23. N. C. Das, S. Ganguly, “Aligned multiwalled carbon nanotubes based polymer nanocomposites via in-situ polymerization”, Northeast Regional Meeting,  American Chemical Society, (NERM 2015) New York, USA, June 10-12, 2018 (Oral talk)

24. N. C. Das, Bo Wang, T.R. Prisk, Garfield T. Warren, M. Mastalerz, J. Rupp, P.E. Sokol,  “Small angle scattering investigation of adsorption of CO2 in nanopores MCM-41 and MCM-48”, American Conference on Neutron Scattering, Washington DC, USA, June 24-28, 2012.

25. T. R. Prisk, N. C. Das, P. E. Sokol, S. O. Diallo, N. Wada, S. Inagaki,  “Microscopic Dynamics of Liquid Helium Confined in 1D Nanopores”, American Conference on Neutron Scattering, Washington DC, USA, June 24-28, 2012.

26. N. C. Das, Garfield T. Warren, Si Cheng, C. Cheng Kao, Peng Ni, B. Dragnea, Paul E Sokol, “Small angle scattering study of the structure and organization of RNA and protein in Brome Mosaic Virus”, American Physical Society, Boston, MA, USA, February 27-March 2, 2012.

27. Bo Wang, N. C. Das, G. T. Warren,  T. R. Prisk, H. Kaiser, M. Mastalerz, J. Rupp, P. E. Sokol, “Adsorption of CO2 in porous MCM41 using small angle scattering”, American Physical Society, Boston, MA, USA, February 27-March 2, 2012.

28. N. C. Das, H. Cao, H. Kaiser, P.E. Sokol, J. Gladden, “Shape and size of highly concentrated micelles in CTAB/NaSal solutions by small angle neutron scattering (SANS)”, USCAN-II, Bloomington, USA, July 5-8, 2011.

29. N. C. Das, H. Cao, H. Kaiser, T. R. Prisk, P. E. Sokol, M. Mastalerz, J. Rupp, “Small angle neutron (SANS) and X-ray scattering (SAXS) investigation of microstructure and porosity with fractal properties of coal, shale, and sandstone from Indiana”, American Physical Society, Dallas, Texas, USA, March 21-25, 2011.

30. P. E. Sokol, T. R. Prisk, N. C. Das, “Deep inelastic neutron scattering study of nanoconfined liquid helium mixtures”, American Physical Society, Dallas, Texas, USA, March 21-25, 2011.

31. K. Yang, L. Huang, N. C. Das, H. Wang, “Solution structures of poly(3-alkylthiophene)”, American Physical Society, Dallas, Texas, USA, March 21-25, 2011.

32. N. C. Das, H. Cao, T. R. Prisk, H. Kaiser, M. Mastalerz, J. Rupp, P. E. Sokol, “Small angle neutron (SANS) and X-ray scattering (SAXS) studies of microstructure and porosity of coal, shale, and sandstone from Indiana”, American Conference on Neutron Scattering, Ottawa, ON, Canada, June 26-30, 2010

33. H. Cao, N. C. Das, H. Kaiser, P.E. Sokol, J. Gladden,  “ Structural transition of warm-like micelles by small angle neutron scattering (SANS)”, American Conference on Neutron Scattering, Ottawa, ON, Canada, June 26-30, 2010.

34. T. Prisk, N. C. Das, P. E. Sokol, C. Pantalei, “Elementary excitation of confined superfluid  3He+4He mixtures”, American Conference on Neutron Scattering, Ottawa, ON, Canada, June 26-30, 2010.

35. N. C. Das, P. E. Sokol, P. Rambach, H. Carvajal-Ortiz, L.M. Pratt, “Time resolved in-situ crystalline structure evaluation of methane clathrate using X-ray diffraction”, American Physical Society, Portland, OR, USA, March 15-19, 2010.

36. N. C. Das, Z. Wang, Y. Liu, K. Yang, H. Wang, “Oriented crystallization of polyethylene templated by vertically aligned carbon nanotube arrays”, 237th ACS National Meeting, Salt Lake City, UT, USA, March 22-26, 2009.

37. K. Yang, C. Xu, N. C. Das, G. Reiter, H. Wang, “Solution structure of poly(3-hexylthiophene) in toluene and its effect on cast-film morphology”, 237th ACS National Meeting, Salt Lake City, UT, USA, March 22-26, 2009.

38. Y. Liu, N. C. Das, K. Hong, G. Eres, U. David, H. Wang, “Polymer nanocomposites with random and aligned multiwalled carbon nanotubes”,  237th ACS National Meeting, Salt Lake City, UT, USA, March 22-26, 2009.

39. Y. Liu, Z. Xu, N. C. Das, L. Huang, K. Yang, H. Wang “Controlled synthesis of palladium nanoparticles”, Materials Research Society, Boston, MA, USA, December 1-5, 2008.

40. Y. Liu, N. C. Das, H. Wang, G. Zhang, J. Cho, K Hong, G. Eres, D. Uhrig, “Aligned carbon nanotube polymer composites”, ASME International Mechanical Engineering Congress and Exposition, Seattle, Washington, USA, November 11-15, 2007.

41.  H. Wang, N. C. Das, K. Yang, B. Hammouda, “Small angle scattering from model polyethylene lamellae”, European Discussion Meeting, (EDM 2007), Waldau / Hochschwarzwald, Germany, October 3-6, 2007.

42. H. Wang, N. C. Das, K. Yang, B. Hammouda, “A comparative study of self-Seeding and isothermal crystallization in polyethylene solutions” American Physical Society, Denver, Colorado, USA, March 5-9, 2007.

43. H. Wang, N. C. Das, H. Bian, Y. Guo, H. Wang, “A second harmonic generation study of polyethylene crystallization” American Physical Society, Denver, Colorado, USA, March 5-9, 2007.

44. Y. Liu, H. Wang, K. Yang, Z. Xu, N. C. Das, K. Hong, G. Eres, D. Uhrig, “Preparation, structure and properties of carbon nanotube polymer composites” American Physical Society, Denver, Colorado, USA, March 5-9, 2007.

45. K. Yang,, H. Wang, Tom Xu, N. C. Das, “Synthesis of multiwalled carbon nanotubes using natural iron-containing minerals” American Physical Society, Denver, Colorado, USA, March 5-9, 2007.

46.  K. Okada, N. C. Das, S. Yamazaki, K. Watanabe, A Toda, K. Inoue, M. Hikosaka, “Time and temperature dependence of size distribution of nuclei in induction period of nucleation of polymers” Polymer Preprints, Japan, Vol.53, No.2, 3185, 2004.

47. K. Okada, M. Hikosaka, S. Yamazaki, N. C. Das, A. Toda, “Establishment of measurement method reliable nucleation rate and induction time during induction period”, Polymer Preprints, Japan, 53(1), 708, 2004.

48. S. Yamazaki, N. C. Das, M. Hikosaka, A. Toda, K. Okada, K. Watanabe, K. Yamada, K. Tagashira, “Formation and growth mechanism of shish under shear flow via local elongation”, Polymeric Materials: Science and Engineering, 91, 453, 2004.

49. N. C. Das, M. Hikosaka, K. Okada, S. Yamazaki, A. Toda, K. Inoue, “Size distribution of nucleus during induction period of nucleation of polyethylene”, Polymer Preprints, Japan, 53(1), 682, 2004.

50. N. C. Das, S. Yamazaki, M. Hikosaka, A. Toda, K. Yamada, K. Tagashira, “Critical shear rate for the formation and growth of shish and chain conformation of interface of shish”, Polymer Preprints, Japan, 53(1), 687, 2004.

51. N. C. Das, M. Hikosaka, S. Yamazaki, A. Toda, A. Ochi, K. Okada, K. Inoue, “Experimental evidence of nucleation during the induction period of polyethylene crystallization by SAXS”, Polymer Preprints, Japan, 52(9), 1719, 2003.

52. M. Hikosaka, N. C. Das, S. Yamazaki, A. Toda, K. Okada, K. Inoue, “Nucleation mechanism in the induction period of polymers by small angle X-ray scattering”, Polymer Preprints, Japan, 52(10), 2463, 2003.

53. N. C. Das, T.K. Chaki, D. Khastgir, A. Chakraborty, “Electromagnetic interference shielding effectiveness of conductive rubber blend composites", (In Proceeding) International Conference on Communication, Computers & Devices (ICCCD2000), IIT, Kharagpur, Dec.14-16, 2000.

54. N. C. Das, M. Hikosaka, S. Yamazaki, K. Okada, K. Watanabe, A. Toda, K. Inoue, “How could the mystery of nucleation of polymer be solved?”, Miyaji Conference, Arima, Kobe, Japan, 27-28 May 2004.

55. N. C. Das, T.K. Chaki, D. Khastgir, A. Chakroborty, “Electromagnetic interference shielding of conductive carbon black and carbon fibre filled composites based on rubber and rubber blends”, International Seminar on Polymer Materials in 21st Century, New Delhi 21-24 February, 2000.

56. N. C. Das, T.K. Chaki, D. Khastgir, A. Chakraborty, “EVA based conductive rubber composites as EMI shielding materials”, National Rubber Conference, New Delhi, February, 18-19, 2000.

57. N. C. Das, H.P. Bhunia, “Development of elastomeric insulator for high voltage application by a new polymer”, 5th Punjab Science Congress, Science and Technology in New Millennium, T.I.E.T., Patiala, India, February 7-9, 2002.

BOOK CHAPTERS

1. A. Pal, N. C. Das, Application of nanocomposites for wound healing, Applications of nanotechnology in biotechnology engineering, Ed. by Basak et al. Ch. 8. Pg. 130-149 (2025). CRC press, New York, USA.

2. M. Shee, N. C. Das, Nanotechnology in drug delivery current techniques and recent advances, Applications of nanotechnology in biotechnology engineering, Ed. by Basak et al Ch. 11, Pg. 197-219 (2025). CRC press, New York, USA (2025)

3. T. Ghosh, P. Banerji, N. C. Das, Synthesis methods for the preparation of fullerenes, Zero-dimensional carbon nanomaterials, Ed. by K. Joseph, R. Wilson, G. George, S. Appukutthan, Ch. 6, Pg. 135-151, Woodhead Publishing, USA (2024).

4. S. Subhadarshini, N. C. Das, MXene-based multifunctional materials for lithium-ion batteries: opportunities and challenges, Nanostructured Materials for Energy Storage, Ed. by K. Deshmukh, M. Pandey, Ch. 9, Pg. 295-317 (2024), Wiley-VCH GmbH.

5. S. Remanan, H. Pulikkalparambil, S. Krishnasamy, S. M. Rangappa, M. S. Kumar, S. Siengchin, J. Parameswaranpillai, N. C. Das, Sodium alginate derived biocomposite for wastewater treatment, Biocomposites for industrial applications, Ed. by Mukhukumar et al. Ch. 5, Pg. 91-110, Woodhead Publishing (2024), USA.

6. S. K. Ghosh, N. C. Das, Application of radiation curing on properties and performance of polymers and polymer composites, Ed. Applications of high energy radiations, Ed. S. R. Chowdhury, Pg. 1-40 (2023) Springer, Switzerland.

7. S. K. Bhattacharyya, S. Maiti, N. C. Das, S. Banerjee, Antibacterial and antiviral functional materials based on polymer nanocomposites, Antibacterial and antiviral functional materials, Ed. by K. Deshmukh, C. M. Hussainch. 6, Pg. 171-202 (2023), American Chemical Society, USA

8. N. Veeramani, P. Ghosh, T. K. Das, N. C. Das, Polymer composites for automotive applicaitons, Industrial applications of polymer composites, Ed. by S. Bhandari, P. Gupta, A. Dey, Ch. 7 pg. 165-196 (2023), Bentham Science, Singapore.

9. A. Ghosh, S. Roy Chowdhury, R. Dutta, R. Babu, C. Rumbo, N. Dasgupta, P. Mukherjee, N. C. Das, S. Ranjan, Polyurethane chemistry for the agricultural applicaitons-recent advancement and future prospects, Polyurethanes: preparation, properties, and applications, volume 3: emerging applications, Ed. by R. K. Gupta,  Ch. 1, Pg. 1-36 (2023). Americal Chemical Society, USA.

10. S. K. Ghosh, N. C. Das, Characterization of various polymer composite sensors, Polymeric nanocomposite materials for sensor applications, Ed. by J. Parameswaranillai, Ch. 5, Pg 121, Elsevier (2023).

11. M. Shee, P. Basak, A. K. Das, N, C, Das, “ Hydrogel based chemical sensors,. Materials for Chemical Sensors, Ed. by S. Bhandari, A. D. Rushi, Boca Raton, CRC Press, P.75-95.  (2023).

12. A. Pal, N. C. Das, “Polymeric materials for flexible batteries, Recent Advancements in Polmeric Materials”, Ed, R. K. Gupta, Pg. 401-417 (2023), Springer, Singapore.

13. K. Nath, N. C. Das, Biodegradable polymer nanocomposites for electromagnetic interference shielding applications,  Biodegrabable and biocompatabile polymer nanocomposites-processing, characterization, and applications, Ed. by K. Deshmukh, M. Pandey, Ch. 13, Pg. 435-484 (2023), Elsevier.

14. S. K. Ghosh, K. Nath, N. C. Das, “Role of MXene/rubber composites in EMI shielding, Mxene Nanocomposites: Design, Fabrication, and Shielding Applications. Ed. by Das et al.”, CRC Press, P. 227 (2023).

15. K. Nath, N. C. Das, Conjugated polymer-based fibers: synthesis, properties, and applications; Conjugated polymers for next generation applications, Eds. V. Kumar, K. Sharma, V1, (2022) Woodhead Publishing Series, Ch.1, pg. 1-38 (2022) Elsevier, UK

16. S. Hui, N. C. Das, Graphene-elastomer nanocomposites for electromagnetic interference (EMI) shielding applications, Graphene-Rubber Nanocomposites-Fundamentals to Applications, Ed. by Bhowmick et al. CRE Press, Pg. 496-526 (2022).

17. S. Hui, N. C. Das, Eds. J. Aslam, C. M. Hussain, R. Aslam, Surface modified carbon nanotubes in Food Packaging. Surface modified carbon nanotubes, Eds by. ACS, V2, Ch. 9, Pg. 199-233 (2022).

18. S. Subhadarshini, N. C. Das, The growth of electrode materials for energy storage; Conjugated polymers for next-generation applications, V2: Energy storage devices, Ch. 4, Pg. 115-144 (2022), Woodhead Publishing Series.

19. T. K. Das, N. C. Das, Preparation of 1D, 2D and 3D Nanomaterials for Water Treatment, Nano-Enabled Technologies for Water Remediation, Ed. by. N. J. Kaleekkal, P. Kumar S. Mural, S. Vigneswaran, Ch. 3, (2022) Elsevier, UK

20. K. Nath, N. C. Das, EMI Shielding Studies of Carbon Nanotube-Polymer Composites. Handbook of Carbon Nanotubes. Ed. by Abraham J., Thomas S., Kalarikkal N. Ch. 9 (2021), Springer, Cham.

21. S. Remanan, N. C. Das, Membrane Distillation: An Efficient Technology for Desalination; Sustainable Technologies for Water and Wastewater Treatment, Ed. by N. J. Kaleekkal, P. Kumar S. Mural, S. Vigneswaran, U. Ghosh, Ch. 4, Pg. 51-70 (2021), CRC Press, Boca Raton, USA.

22. S. Remanan, S. Ghosh, T. K. Das, N. C. Das, Applications of Thermoplastics and Thermosetting Polymer Composites, Lightweight Polymer Composites Structures: Design and Manufacturing Techniques. Ed. by S. M. Rangappa, J. Parameswaranpillai, S. Siengchin, L. Kroll,   Ch. 12, P. 331-357 (2020), CRC Press, Boca Raton, USA.

23. S. Remanan, H. Pulikkalparambil, S. M. Rangappa, S. Siengchin, J. Parameswaranpillai, N. C. Das, Hydrophobic and Hydrophilic Polymer Coatings; Polymer Coatings: Technologies and Applications, Ed. by Sanjay Mavinkere Rangappa, Jyotishkumar Parameswaranpillai, Suchart Siengchin, Ch. 13, pg. 247-268 (2020), CRC Press, Boca Raton, USA.

24. S. Remanan, N. C. Das, Application of DSC to Polymeric Systems. Polymers and Multicomponent Polymeric Systems, Ed. by Jose James, Pramoda Kumari Pallathadka, Sabu Thomas, Taylor & Francis Group, Ch. 6, Pg. 153-178 (2020), CRC Press, Boca Raton, USA.

25. S. Ganguly, P. Das, N. C. Das, Characterization tools and techniques of hydrogels, Hydrogels Based on Natural Polymers, Ed. by Yu Chen, Ch. 16, Pg.481-517 (2020), Elsevier, UK.

26. K. Nath, S. K. Battacharyya, N. C. Das, Biodegradable polymeric materials for EMI shielding, Materials for potential shielding applications, Ed. J. Kuruvilla, W. Runcy, G. Geo, Ch. 10, Pg.165-178 (2019), Elsevier, UK.

27. S Ganguly, N. C. Das, Rheological Properties of Polymer–Carbon Composites, Carbon-Containing Polymer Composites, Ed. by Mostafizur Rahaman, Dipak Khastgir, Ali Kanakhir Aldalbahi, Ch. 8, Pg. 271-294 (2019), Springer, Singapore.

28. S. Ganguly, N. C. Das, Chlorosulphonated polyethylene and its composites for electronics applications, Flexible and Stretchable Electronics Composites, Ed. by S. Thomas et al. Ch. 8, Pg. 229-259 (2016), Springer, Switzerland.

BOOK EDITING

1. Polymer Nanocomposites Containing Graphene: Preparation, Properties and Applications, Edited by Dr. Mostafizur Rahaman, Dr. Lalatendu Nayak, Prof. Ibnelwaleed A. Hussein, Dr. Narayan Chandra Das, 1st Edition, Elsevier (Woodhead Publishing, USA), 2021,

Patent

1. Production of Diesel-Like Fuel Oil from Scrap Tire in a Specially Designed Pyrolysis Reactor, No. 202331051078 dated 28-07-2023