Industrial concrete floor sealing demands the application of the right materials and coating thickness. If you take shortcuts in preparing the surface, it decreases the longevity of floor sealing. Thus, you need to follow a proper process for concrete sealing in North Carolina and other areas.
Here are the steps to follow:
Evaluate the general present condition and quality of the surface, mainly if it is not coated. Find out areas affected by oil, dirt, ease, and other treatments. You should also look for areas where water accumulates a lot.
Once you identify the contaminants, you should have them from the surface. Use a scrubber with a strong degreaser or cleaner and pressure wash the contaminated floor areas.
Even if the concrete floor appears clean, it may still have chemicals that can ruin the new flooring. Test the PH if the concrete of the existing floor is hugely contaminated.
For the perfect industrial concrete floor sealing, use a meter to determine the moisture level on new slabs. If the PH level is more than 4%, you should do a special testing process. Always look for moisture vapor transmission signs like current coat bubbling.
Shot blasting is a technique to prepare and add the most appropriate bonding. Do diamond grinding to smooth the surface profile and eradicate contaminants such as paint and old coats.
Diamond grinding opens up concrete pores and accumulates heavy dust. So, use a cutting-edge dust accumulation system.
Use a hand grinder with vacuum and dust shroud in every corner where the diamond grinder and shot blaster can't reach like a wall-floor intersection.
If you can't do this task perfectly, coal starts to peel and chip in those areas.
Select the best coat considering factors such as - chemical vulnerability, chemical floor, water exposure, types and level of traffic, shopping needs, and slip resistance.
Assess every seal application suited to the coating system. A particular coat never suits all types of floors.
If you want to seal joints in your industrial property's floor and allow a little bit of concrete slab movement, you should do joint caulking. The activity prevents the entrance of dust and debris inside these areas.
Moreover, it also extends the longevity of industrial concrete floor sealing.
Fix Issues
To do concrete sealing in North Carolina and other areas successfully, you should fix all the noticeable damages. Wait for 1 to 2 days and more to cure damages before the floor's exposure to traffic and chemicals.
The flooring can be sufficiently hard to walk on in eight to twelve hours as it won't have its full chemical resistance and physical stamina. When planning your concrete floor sealing project, add sufficient cure time.
Follow the steps mentioned above to do concrete sealing in North Carolina or any other area successfully. You should always hire professionals since you can't do everything yourself, as concrete sealing is a big investment.
As the requirements of sealing projects differ, you need to take the right steps depending on the concrete state, so the coating adhesion and installation are successful.