Embedded Files
Netgear EX6150 AC1200 Wifi Range Extender Introduction
Netgear EX6150 AC1200 Wifi Range Extender Introduction
By increasing the range and speed of WiFi, delivering up to 1200Mbps of 11ac dual-band Wi-Fi, the Netgear EX6150 Setup AC1200 Wifi Range Extender enhances the existing home network. It works with any router and, even in remote areas of your home, offers Wi-Fi for HD video streaming and gaming. For iPads, tablets, laptops and more, get the network you need. Computer Requirements: Microsoft Internet Explorer 8.0, Firefox 20 or Safari 5.1 or Google Chrome 25.0 browsers or higher, 2.4 and/or 5GHz 802.11 a/b/g/n/ac WiFi router or gateway.
Netgear EX6150 WiFi Range extender Setup: Netgear AC1200
Netgear EX6150 WiFi Range extender Setup: Netgear AC1200
Extremely long wireless range: Provides up to 1200 square meters of a national network and connects up to 20 devices, including tablets, smartphones, speakers, smart speakers, tablets, IOT apps, etc.
Seamless Smart Roaming: Use your current network's SSID name so that you never get disconnected while driving around your home or workplace.
Ac1200 Wifi speed: Provides up to 1200 Mbps of output for demanding HD streaming and online gaming using dual-band and proprietary Fastlane technology.
Universal compatibility: Works with any WiFi enabled wireless router, gateway or cable modem.
Connected Ethernet port: Only connect to a single gigabit port with full-speed game consoles, streaming players or other wired devices.
Accessible & stable: Supports wireless security procedures for WEP and WPA/WPA2.
Simple to set up: Use the setup program for Nighthawk, display WiFi settings, and view mapped network devices on your network.
How to reset my EX6150 to the default factory configuration
How to reset my EX6150 to the default factory configuration
Look for an object, like a paper clip or a pen to factory Reset Netgear Extender.
Look for the Factory Reset button at the bottom of the Netgear EX6150 Extender.
Using a paper clip or pen to press and hold the reset button and wait for at least 5 seconds or until the Screen to Extender LED flashes amber.
Release the button for Factory Reset and wait for a reboot of the extender.
The extender is back to its original factory settings before it reboots.
Netgear EX6150 Ac1200 Wifi Range Extender Setup as an Access Point
Netgear EX6150 Ac1200 Wifi Range Extender Setup as an Access Point
In the electrical socket, connect the wire to the extender.
Wait until the light inside the Power LED becomes orange.
On the EX6150, set the switch to Access Point.
Attach an Ethernet cable to both the Ethernet port on the EX6150 and to the router's LAN port.
Links to the default EX6150 WI-FI networks of your wireless devices, such as laptops, tablets or smartphones:
Open a web browser and from the address field choose www.mywifiext.net. You will be shown the New Extender Configuration.
For NEW EXTENDER SETUP, press the Configuration button.
A Build Account screen will show it.
On the Build Account screen, fill out the fields and push the NEXT button.
It will detect which mode has been set for the EX6150.
Hit the PUBLIC NETWORK or HOME NETWORK toggle.
By clicking on the NEXT button, enter the desired network name (SSID), security choice, and password.
Before you click on the Continue button, make sure the client machine is connected successfully.
Click the tab for Proceed. When completed, a screen shows that you have generated an access point successfully.
There is a click on a button named Next. The machine shows an entry. To complete the setup, fill in the registration areas, and press the Finish button. When you do not want your extension to be registered, simply click Skip Registration.
The EX6150 NETGEAR Range Extender does not detect a NETGEAR router's 5GHz wireless band, nor is the 5GHz link intermittent.
The EX6150 NETGEAR Range Extender does not detect a NETGEAR router's 5GHz wireless band, nor is the 5GHz link intermittent.
Try swapping the frequency interface on your router if the extender is unable to detect your 5GHz wireless router wifi link or if the extender happily submits sporadically to the 5 GHz band.
Try swapping the frequency interface on your router if the extender is unable to detect your 5GHz wireless router wifi link or if the extender happily submits sporadically to the 5 GHz band.
 1 . In order to change your router's wireless channel:
Shift your extender closer to your router first.
Note: Abnormal 5GHz wireless band extension connections can be caused by inappropriate positioning. See where to put my NETGEAR Wi-Fi Range Extender for more details? Or how far can I get from my router on my EX8000 Nighthawk Tri-Band WiFi Range Extender?
2. Log in to interface with your router. For more info, see How do I log in to my home router with NETGEAR?
3. To access the Wireless Settings tab after your router logs in successfully, press Wireless.
4. Look for a channel for a wireless network under the (5GHz).
5. If the router is set to Auto or a channel between 52-64 or 100-140, switch it to the 36-48 or 149-161 channel.
Note: Even if you are using a channel between the ranges suggested above, to fix intermittent connections, change the channel to something different.
6. Click Apply. Click
7. Reconnect the extender to the 5GHz band and see if it has enhanced the connectivity.
Note: In order to be able to see your 5GHz router network name (SSID) in the list of available networks you may expand, you can need to update your network list.
Page updated
Google Sites
Report abuse