How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a desktop-style volume knob that controls a wired headphone jack and RCA outputs at the same time, choose MYPIN 192kHz; if you need a pair of kids' over-ear headphones with a hard volume ceiling built in, choose EarFun K2. These two are not really competitors — one is a converter/amplifier box, the other is a headset — but they sit at opposite ends of the same question: who actually controls the volume on wired headphones?
• MYPIN 192kHz — biggest strength: A real analog volume knob that adjusts the 3.5mm headphone jack and the RCA outputs together, and doubles as the on/off switch.
• MYPIN 192kHz — biggest trade-off: It is not a portable audio device. It is a converter box that needs digital sources (Optical, Coaxial, Bluetooth) and a power setup, so it lives on a desk or in an AV rack.
• EarFun K2 — biggest strength: Capped volume at 85/94dB, which is the whole point of a kids' headphone — the child cannot push it louder than the design allows.
• EarFun K2 — biggest trade-off: It is Bluetooth-first with a 3.5mm backup cable, so its "wired volume control" story is limited to the source device's own controls.
• Who each pick is for: MYPIN 192kHz for someone wiring a TV, console, or phone into a wired headphone or speaker setup who wants a single physical volume knob. EarFun K2 for a parent buying two headsets for kids who need a safe, fixed listening level.
The MYPIN 192kHz is a digital-to-analog converter with a built-in headphone amplifier, and its headline feature for this comparison is the volume knob. That knob is not a software slider. It is a physical control that raises or lowers the headphone jack and the RCA outputs simultaneously, so whatever you have plugged in moves together. In my opinion, that is the single most useful thing about this box: one hand, one knob, done.
It also handles a lot of inputs. Optical, coaxial, and digital audio signals come in, and stereo analog audio goes out through L/R RCA and a 3.5mm jack. Bluetooth 5.0 with a dedicated antenna lets phones and tablets stream into it — but note the direction: this is a Bluetooth receiver, not a transmitter. The DAC chip supports 32–192kHz at 24-bit with 2.0ch PCM/LPCM formats, and the headphone amp is rated to drive 16–300Ω headphones, which covers everything from sensitive IEMs to harder-to-drive over-ears. There is also a built-in microphone and a selector button for handling phone calls over Bluetooth.
EarFun K2: Who It's For
The EarFun K2 is a two-pack of kids' over-ear Bluetooth headphones, and its defining spec is the 85/94dB volume limit. That limit is the answer to the volume-control question from the opposite direction: instead of giving the listener a knob, it removes the ability to go too loud. The design targets the WHO-recommended level to protect young ears, and the headphones comply with RoHS2.0 and FCC standards and carry CPC certification.
The rest of the spec sheet is built for kids and travel. Bluetooth 5.4 handles the wireless connection, a built-in mic covers hands-free calls and online classes, and 40mm dynamic drivers produce stereo sound across a 20Hz–20,000Hz range with 32Ω impedance and 100dB sensitivity. Battery life is rated at 40 hours, with a 2.5-hour charge over USB-C. The headband is memory foam and can be twisted and bent, the earcups are memory foam too, and the whole thing folds flat — 175g, sized for roughly ages 3 to 18.
There is also a 3.5mm jack and an included audio cable. That matters here: when the battery runs out, you can plug in and keep listening the traditional way. But understand what that means for volume — once you are on the cable, the loudness is set by whatever device you plug into, because the K2 has no inline volume dial. Its controls are button-based media controls, and it has no active noise cancellation.
Who should buy it: parents who want two headsets, a safe volume ceiling, and a foldable design that survives being stuffed in a backpack. Who should skip it: adults who want full control over their own listening level, or anyone who needs a wired headphone with its own physical volume knob.
Side-by-Side: Which Should You Choose?
• Best for a physical volume knob on wired headphones → MYPIN 192kHz. The knob controls the 3.5mm jack and RCA outputs together and also powers the unit on and off.
• Best for safe listening levels for kids → EarFun K2. The 85/94dB cap is the feature, not a limitation.
• Best for driving a wide range of wired headphones → MYPIN 192kHz. The amp is rated for 16–300Ω, so it covers low-impedance and high-impedance cans alike.
• Best for connecting a TV or AV gear → MYPIN 192kHz. Optical and coaxial inputs plus RCA and 3.5mm outputs make it an AV hub.
• Best for portability → EarFun K2. 175g, foldable, and wireless; the MYPIN box is a stationary 3.35" x 3.94" unit.
• Best for two listeners at once → EarFun K2. It ships as a two-pack, one blue and one pink.
• Best for hassle-free wired backup → EarFun K2. The 3.5mm cable keeps it working when the battery is empty, though volume then comes from your source.
If the phrase "wired headphones volume control" means you want to physically turn a knob and hear the level change, I would buy the MYPIN 192kHz. It is the only one of the two that puts volume control in your hand as a hardware feature, and it does it for both the headphone jack and the RCA outputs. I would only steer you to the EarFun K2 if the actual job is protecting a child's hearing — in which case the fixed 85/94dB ceiling is exactly what you want, and the lack of a volume dial is the point. Check the current price on Amazon for whichever one matches your setup before you commit.
how to disable volume control on wired headphones
On most wired headphones the volume is controlled by the source device, not the headphone, so there is nothing on the headphone itself to disable. With the EarFun K2, the 85/94dB limit is fixed by design and cannot be raised. With the MYPIN 192kHz, the analog knob is the volume control — turning it fully down is effectively muting the output.
do earbuds have volume control
Does the MYPIN 192kHz work with any wired headphone?
It is rated to drive headphones from 16Ω up to 300Ω, so most wired headphones fall inside that range. It feeds them through the 3.5mm jack, and the same knob also controls the RCA outputs. Headphones outside that impedance window are not covered by the spec.
Yes — it includes a 3.5mm audio cable, so you can plug in and keep listening when the battery is empty. In wired mode the loudness is governed by the device you plug into, because the K2 has no inline volume control of its own.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: MEZE AUDIO vs eKids Mario Kids Headphones, LUDOS Earbuds in-Ear Headphones vs JBL Tune 510BT, JOMILIN A8 vs RAT TAIL V5.3: Foldable Headphones, GNZUQ Open Ear Earbuds vs IKT AI Translation Earbuds