Pure oxygen is needed for various industrial and medical purposes. Hence, many industries and hospitals prefer to install onsite oxygen generators to meet their requirements for pure oxygen. They opt for the PSA plant (oxygen) provided by MVS Engineering Pvt. Ltd. This oxygen generator works on the principle of Pressure Swing Adsorption (PSA). MVS Engineering has been supplying this PSA plant for the last few decades.
Two towers are filled with Zeolite, which can absorb nitrogen gas. When air is compressed and passed through these towers, nitrogen is absorbed and delivered pure oxygen. When the Zeolite bed of a tower is filled with nitrogen, this gas is released back into the atmosphere. During this time, nitrogen is absorbed into the Zeolite of another tower. So, the operation of the plant continues 24x7 without any problem.
Advantages of installing a PSA oxygen plant
MVS Engineering makes sure to supply user-friendly oxygen generators to all clients. There are many benefits of installing this plant, which encourage others to get this plant for their uses.
Different capacities – PSA oxygen generators are available with various production capacities. The flow range varies from 3 Nm3/hr to 200 Nm3/hr. Thus, clients can choose these oxygen plants according to their requirements for oxygen. If a further higher flow range is needed, MVS Engineering provides a VPSA oxygen plant, by attaching a booster for increasing the flow rate of this machine.
Cost-effective – The cost of the MVS Engineering oxygen plant varies according to its size and capacity. The initial cost of a PSA Oxygen plant varies between Rs 10 and 15 Lakhs. However, this investment in buying an oxygen plant is still profitable for clients. They get pure oxygen that is equivalent to 10 – 300 cylinders in a day. Moreover, the electrical charge is the only operational expense of this machine. Thus, the cost of this generator can be recovered within 2 years if its full capacity is utilized every day.
Pure oxygen – The PSA oxygen plant of MVS Engineering produces very pure oxygen. The purity level of oxygen varies from 93% to 95%. So, this oxygen is useful in most cases where 99% purity is not essential. Only a small amount of nitrogen and argon gases may be present, which do not interfere with any operation. Since the dew point of oxygen is - 40°C, very dry oxygen can be received from this plant. If the purity level of oxygen drops below 90%, the plant stops functioning automatically with an alert system.
Automated operation – MVS Engineering has designed the PSA oxygen plant to be fully automated. It only needs to be switched on and then it works automatically, producing pure oxygen continuously. So, no trained manpower is needed for the successful operation of this machine. The oxygen is sent directly through pipelines to the required sites, as per the necessity of clients.
Therefore, all industries and medical centers are benefitted from the installation of oxygen generators. The PSA plant (Oxygen) of MVS Engineering helps in satisfying all clients, by fulfilling their requirements for a long time.