How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a two-pack of in-ear USB-C earbuds with active noise cancellation and a mic for calls, choose Mutsrd 2; if you need a single pair of kid-friendly over-ear headphones with a hard volume cap and a sharing jack, choose EarFun K1.
• Mutsrd 2's biggest strength: you get two pairs of in-ear USB-C earbuds with a built-in mic, remote controls, and active noise cancellation — so one can live in a bag while the other stays home.
• Mutsrd 2's biggest trade-off: it's an in-ear design with a 1-meter cord and "NO" stated warranty, so it's less suited to small kids or anyone who dislikes earbuds pressed into the ear canal.
• EarFun K1's biggest strength: it's purpose-built for kids — 85/94dB volume limiting, a 3.5mm sharing jack, and a sturdy foldable over-ear frame with an 18-month warranty.
• EarFun K1's biggest trade-off: no noise cancellation, a single unit per purchase, and an over-ear shape that's bulkier to carry than pocket-sized earbuds.
• Who Mutsrd 2 is for: adults and teens who want a spare pair of wired USB-C earbuds for calls, music, and gaming on modern phones and tablets.
• Who EarFun K1 is for: parents buying headphones for a child's school tablet, online classes, or travel, where volume safety and durability matter most.
Mutsrd 2 is a two-pack of wired USB-C in-ear earbuds. The headline feature is the connector and the fit: these plug directly into USB-C audio ports, which means no dongle and no charging. The included DAC chip is there to keep the audio clean — the manufacturer's own wording is "no buzzing, popping, or any bad audio issues," which tells you the goal is plug-and-play reliability rather than audiophile tuning. The listed frequency range is the standard 20 Hz–20,000 Hz, and the driver is a dynamic type. In my opinion, that combination points to a general-purpose sound profile meant for everyday listening rather than critical music sessions.
The controls are the practical part. The inline remote handles volume up and down, previous/next track, play/pause, and answer/end/reject calls. That last set matters if you take a lot of calls — you can hang up without pulling out your phone. Active noise cancellation is listed as the noise control method, which is unusual for a wired set and genuinely useful on a train or in a shared office. The cord is described as strengthened for durability, the connectors are metal-plated to reduce poor contact, and the cable runs 1 meter. There's also an 18-month replacement policy mentioned in the "What You Get" section, even though the product-information field lists the warranty description as "NO" — a contradiction worth noting, since the marketing copy and the spec field don't agree.
Compatibility is very broad: iPhone 17/16/15 families, recent iPad Pro, iPad Air, iPad Mini, MacBook and MacBook Pro, a long list of Samsung Galaxy S, Z, and A series phones, Galaxy Tab, and Google Pixel models going back several generations. If your device has a USB-C audio port, it's very likely covered.
EarFun K1: Who It's For
EarFun K1 is a wired over-ear headphone built specifically for kids. The defining spec is the volume limit: 85/94dB. That's the whole point of the product — it caps loudness so a child can't accidentally crank a video to painful levels. If you're buying for a young kid, this is the feature that separates it from a generic headset.
The second standout is the 3.5mm sharing jack. Two kids can listen to the same tablet without a splitter — plug one headphone into the other and both hear the audio. Anyone who has driven a car with two children and one iPad understands why that matters. There's also an inline microphone on the audio cable for online classes and calls, plus button controls for play/pause, answering and ending calls, and skipping tracks.
The build is aimed at rough handling. The description calls out sturdy, soft materials that tolerate twisting and pulling, an adjustable headband that stretches for different head sizes, and a foldable design for packing into a school bag. The 40mm dynamic drivers are described as producing balanced stereo sound, with a frequency range of 20 Hz–20,000 Hz, 32-ohm impedance, and 100dB sensitivity. In my opinion, the 40mm driver is the more interesting number for parents: physically larger drivers tend to move more air, which usually means fuller sound at lower volumes — useful when the volume is capped.
The trade-offs are clear. There's no noise cancellation, so a noisy classroom or airplane cabin will still be audible. It's a single unit, not a pair. The over-ear shape is bulkier than earbuds, and the violet finish is a style choice, not a neutral one. It weighs 180 grams, which is noticeable on a small head over a long session but not unreasonable for an over-ear design. Compatibility covers devices with a Type-C cable such as Kindle Fire tablets, Switch, Chromebook, and PC. EarFun states an 18-month warranty.
Who should buy it: parents of kids roughly in the school-age range who need headphones for tablets, online learning, and travel, and who care more about hearing safety than about audio fidelity. Who should skip it: adults wanting a compact everyday headphone, anyone who needs active noise cancellation, or buyers who want two pairs in one purchase.
• Best for two users or a backup pair → Mutsrd 2. It ships as a 2-pack; EarFun K1 is a single headphone.
• Best for young kids → EarFun K1. The 85/94dB volume limit is the deciding factor, and Mutsrd 2 has no such cap.
• Best for noise reduction → Mutsrd 2. It lists active noise cancellation; EarFun K1 lists noise control as "None."
• Best for shared listening → EarFun K1. The 3.5mm sharing jack lets two kids hear the same device without a splitter.
• Best for comfort during long sessions → EarFun K1. An over-ear, adjustable, foldable frame with soft materials avoids pressing into the ear canal the way in-ear buds do.
• Best for portability and commuting → Mutsrd 2. Pocket-sized in-ear buds with a 1-meter cord beat a foldable over-ear set for carrying light.
• Best for broad phone and tablet compatibility → Mutsrd 2. Its compatibility list explicitly spans iPhone 17/16/15, iPad Pro and Air, most Galaxy S/Z/A models, Galaxy Tab, and Pixel.
• Best for buyers who want a stated longer support window → EarFun K1. EarFun advertises an 18-month warranty; Mutsrd's spec sheet lists warranty as "NO," despite an 18-month replacement claim elsewhere in its copy.
If I were buying for myself, I'd take the Mutsrd 2. Two pairs, USB-C plug-and-play, an inline remote that handles calls, and active noise cancellation is a combination that covers commuting, desk work, and travel without any charging routine — and the broad device list means it will work with whatever phone I'm carrying. If I were buying for a child, I'd flip to the EarFun K1 without hesitation, because the volume limit and sharing jack are exactly the two things a kid's headphone should have, and no amount of extra features on the Mutsrd makes up for that. In my opinion the choice isn't close once you know who the listener is.
FAQ
Both are wired USB-C products, but their listed compatibility differs. Mutsrd 2 explicitly names iPhone 17/16/15, iPad Pro and Air, a wide range of Galaxy S, Z, and A models, Galaxy Tab, and Pixel. EarFun K1 states compatibility with Type-C devices such as Kindle Fire Tablet, Switch, Chromebook, and PC.
Only the Mutsrd 2 lists active noise cancellation as its noise control method. The EarFun K1 lists noise control as "None," which is typical for a volume-limited kids' headphone.
Both are wired headphones without batteries, so they tend to sit in a similar budget-minded category — but I won't quote figures here. Check the current price on Amazon using the button on this page and compare the two side by side before you commit.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.