How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want to fix a single dead headphone socket with the smallest, cheapest possible part and you already own a soldering iron, choose Mustpoint 2x; if you need to solve headphone audio and game-card reader problems at the same time and you'd rather avoid desoldering entirely, choose MFLDSFLHM Switch Game Card.
• Mustpoint 2x — biggest strength: it's a single, focused 3.5mm headphone jack port, and the repair stays on the game-slot sub-board that unplugs from the mainboard, so you don't have to free the whole motherboard.
• Mustpoint 2x — biggest trade-off: it's a bare component. You must open the console, desolder the old port and solder the new one in. No tools, no screws, no guidance included.
• MFLDSFLHM Switch Game Card — biggest strength: it's a bundled repair kit — headphone jack plus game card reader slot, back cover screws, pry tools and two screwdrivers — and the manufacturer states no desoldering or soldering is required.
• MFLDSFLHM Switch Game Card — biggest trade-off: it only fits the original Nintendo Switch HAC-001. It will not fit Switch Lite (HDH-001) or Switch OLED (HEG-001), and you may need to move parts over from your old console.
• Who each pick is for: Mustpoint 2x is for a confident solderer fixing one specific symptom. MFLDSFLHM is for a screwdriver-level tinkerer who wants a complete drop-in module and possibly two fixes in one job.
The Mustpoint 2x is a replacement 3.5mm headphone jack port socket for the Nintendo Switch console. That's the whole product. It exists to repair headphone-audio-related issues — crackle, one channel dropping out, no sound through headphones — by replacing the jack itself. The part lives on the game slot module board, and that detail matters more than it sounds: because the port sits on a sub-board that unplugs from the mainboard, the repair can be done without pulling the entire mainboard out of the shell. For a repair that's normally fiddly, that's a genuinely helpful bit of design.
So who should buy it? Someone who already repairs consoles, or who is comfortable with a soldering iron and wants to replace just the failed jack without buying a whole module. It's also the logical pick if your game card reader works perfectly and only the headphone socket is dead — you're replacing exactly the failed part and nothing else. Who should skip it? Anyone who has never soldered, anyone without the tools, and anyone who wants step-by-step guidance. This is not a beginner's first repair.
MFLDSFLHM Switch Game Card: Who It's For
The MFLDSFLHM Switch Game Card is a different animal entirely. It's a combined replacement assembly: a new game card reader slot plus a headphone jack port, built for the Nintendo Switch HAC-001 version only. The manufacturer lists the problems it addresses as no voice from headphones, card reader detection issues, games that won't read, cards that won't insert or eject cleanly, and games that keep re-loading. In other words, it targets the whole game-slot module area rather than one socket.
Two things stand out in the specs. First, the manufacturer states that installation does not require desoldering or soldering — a real advantage over the Mustpoint part if you're handy with a screwdriver but not with an iron. Second, the box is actually stocked for the job: one set of headphone jack plus card reader slot replacement parts, 8 back cover screws, pry tools and two screwdrivers. You reuse the remaining screws from your old console, and you may need to transfer other accessories over from the original assembly, which the listing flags up front.
Side-by-Side: Which Should You Choose?
• Best for headphone audio only → Mustpoint 2x. It replaces just the 3.5mm port, so you're not disturbing a working card reader.
• Best if you also have card reader symptoms → MFLDSFLHM Switch Game Card. It covers both the jack and the reader slot in one part.
• Best if you can't or won't solder → MFLDSFLHM. The manufacturer states no desoldering or soldering is required, whereas the Mustpoint part explicitly requires both.
• Best if you already solder → Mustpoint 2x. You're paying for the component, not for tools you already own.
• Best for a complete job out of the box → MFLDSFLHM. Screws, pry tools and two screwdrivers are included; the Mustpoint part ships as the socket alone.
• Switch Lite or Switch OLED owner → neither. MFLDSFLHM is HAC-001 only, and Mustpoint 2x is listed for the Switch console's game slot module board — check your model carefully before ordering either.
• Best for a first-time opener → MFLDSFLHM. No soldering plus included pry tools and drivers lowers the barrier considerably, though you should still watch a teardown video first.
• Best for minimal disturbance → Mustpoint 2x. Because the jack sits on a sub-board that unplugs from the mainboard, the repair avoids removing the entire mainboard.
In my opinion, most people shopping between these two should buy the MFLDSFLHM Switch Game Card — provided they own the original HAC-001 Switch. The reason isn't the part count; it's the process. A repair you can do with a screwdriver and pry tools, with the screws and drivers already in the box, is a repair most people will actually finish. The Mustpoint 2x is the better choice only for one narrow buyer: someone who already solders, has the tools, and whose card reader is perfectly healthy. If you've never held a soldering iron, the Mustpoint part will sit in a drawer. Check the current price on Amazon for both and confirm your console model before you commit.
FAQ
It's designed exactly for that — it's a replacement 3.5mm headphone jack port for headphone-audio-related issues. The catch is installation: the old port must be desoldered and the new one soldered, so it only works for you if you have those skills and tools.
MFLDSFLHM is explicitly built for the Nintendo Switch HAC-001 only and states it does not fit Switch Lite (HDH-001) or Switch OLED (HEG-001). Mustpoint 2x is listed for the Switch console's game slot module board, so verify your exact model before ordering.
It depends on what you already own. If you have soldering gear, the Mustpoint 2x gives you the single failed part with no extras. If you don't, the MFLDSFLHM kit bundles the jack, card reader slot, screws, pry tools and drivers, which is more useful out of the box. Compare the current prices on Amazon for your situation.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.