2026

14. Islam, M. S., Khan, M., Azad, M., and Xie, T. “Development of Composite Solid-State Electrolytes through Computation-       Aided Experimentation.” Oral Presentation (Presenting Author), 250th ECS Meeting, The Electrochemical Society, Calgary, Alberta, Canada, October 25–29, 2026. 

13. Imrus Salehin, Md. Shakibur Rahaman Chowdhury, Kaushik Roy, and Mohammad A. Azad, “FSDA: Few-Shot Supervised Domain Adaptation for Pharmaceutical Drug 3D Printability Prediction,” Poster Abstract, 2026 AAPS PharmSci 360, New Orleans, LA, USA, October 26–28, 2026.

12.  Chakraborty S, Heyward I, Desai S, Azad MA. “Influence of Solvent Selection on GelMA Hydrogel Properties: Implications   for Preparation and Performance.” 42nd Southern Biomedical Engineering Conference (SBEC), New Orleans, LA,                         September 10–13, 2026. [Oral Presentation]

11.  Fortune, A., Larbi, J., Islam, M. S., “Novel Solid-State Electrolytes for Next-Generation Batteries with Data-Driven Methods.” Poster Presentation, 15th Annual COE Dr. Bala Ram Graduate Poster Presentation Competition, North Carolina A&T State University, March 27, 2026 

10.   Sajal Chakraborty, Izabele Heyward, Salil S. Desai, Ayat Alwakwak, Leah Worrill, Caleb Keaton, and Mohammad A. Azad,   “Solvent-Dependent Physical Properties of Photo-Crosslinked GelMA Hydrogel: Comparative Evaluation of Rheological, Mechanical, and Swelling Behavior.” Poster Presentation (Presenting 2026 Undergraduate and Graduate Research & Creativity Symposium at North Carolina Agricultural and Technical State University, April 23, 2026. 

2025

9. Joseph Annor-Gyamfi, Trevor Melton, and Mohammad Azad, “Mitigating Challenges of Eudragit L100-55 for Semi- Solid Extrusion 3D Printing,” presented at the 2025 AIChE Annual Meeting, November 2–6, 2025, Boston, Massachusetts, USA. The work was presented in the “3D Printing of Functional Materials” session as Paper 310a. Published in the 2025 AIChE Annual Meeting Proceedings, ISBN 978-0-8169-1125-7, American Institute of Chemical Engineers         (AIChE). 

2024

8. Md Shakibur Rahaman Chowdhury, Brandon Bell, Trevor Melton, Amitabha Dey, Asmaa Alawbali, and Mohammad Azad, “Predicting the 3D Printability of Polymer-Based Ink Using Machine Learning,” presented at the 2024 AIChE Annual Meeting, October 27–31, 2024, San Diego Convention Center and Hilton San Diego Bayfront, San Diego, California, USA. Paper 235f, “Polymers in Additive Manufacturing II.” Published in the 2024 AIChE Annual Meeting Proceedings, ISBN 978- 0-8169-1122-6, AIChE.

7. Jonathan Appiah, Nicholas Edenhoffer, Brandon Bell, Shay Soker, and Mohammad Azad, “Investigating Glyphosate Toxicity through the Development of Gut Organoids and 3D Printed Thin Films,” presented at the 2024 AIChE Annual Meeting, October 27–31, 2024, San Diego Convention Center and Hilton San Diego Bayfront, San Diego, California, USA. Paper 440e, “3D Printing Fundamentals and Applications.” Published in the 2024 AIChE Annual Meeting Proceedings, ISBN 978- 0- 8169-1122-6, AIChE.

2023

6. Farzana Rony, Brian Rogers, Destinee Clay, Asmaa Alawbali, Shamsuddin Ilias, and Mohammad Azad, “Swellable Cross- Linked Biopolymer to Enhance Ink Rheology and Mechanical Properties of 3D Printed Thin Film Incorporated with Pharmaceutical Active,” presented at the 2023 AIChE Annual Meeting, November 5–10, 2023, Hyatt Regency Orlando, Orlando, Florida, USA. Paper 230e, “Particle Engineering Applications: Additive Manufacturing, Energy Storage and Carbon Capture.” Published in the 2023 AIChE Annual Meeting Proceedings, ISBN 978-0-8169-1120-2, AIChE.

5.  Farzana Khan Rony, Brian Rogers, Destinee Clay, Shamsuddin Ilias, and Mohammad A. Azad, “Biopolymer Sodium Alginate-Based 3D Printed Thin Film Development for Pharmaceutical Active Delivery,” presented at ACS Spring 2023, March 26–30, 2023, Indianapolis, Indiana, USA, as part of the American Chemical Society Spring Meeting. The meeting was conducted in hybrid format. This is an ACS conference abstract/presentation rather than a full AIChE-style proceedings paper.

2022

4. Mohammad Azad, “3D Printing of Polymeric Film for Pharmaceutical Active Delivery-Evaluation of Materials Suitability,” presented at NanoImpacts Conference 2022: Semiconductor Synthetic Biology and Beyond – Undergraduate Research Symposium, October 15, 2022, Joint School of Nanoscience and Nanoengineering, Greensboro, North Carolina, USA. The overall NanoImpacts Conference ran October 13–15, 2022; the Undergraduate Research Symposium was specifically held on October 15. N.C. A&T 

2021

3. Mohammad Azad, Georgia Kimbell, and Deborah Olawuni, “3D Printing of Pharmaceuticals-Exploring Process Parameters and Structure Dry Weight Relations,” presented at the 2021 AIChE Annual Meeting, November 9, 2021, John B. Hynes Veterans Memorial Convention Center, Boston, Massachusetts, USA. Paper 224d; the in-person portion of the AIChE Annual Meeting was held November 7–11, 2021, followed by a virtual component November 15–19. The work appears in the Next-Gen Manufacturing/2021 AIChE proceedings, p. 87; AIChE Annual Meeting Proceedings ISBN 978-0-8169-1116-5. 

2019

2.   Mohammad Azad, Gerard Capellades, Allison Wang, David Klee, Gregory Hammersmith, Kersten Rapp, David Brancazio,   and Allan Myerson, “Impact of Particles Needle Shape, a Critical Material Attributes (CMAs), on Miniaturized Pharmaceutical Units Operation,” presented at the 2019 AIChE Annual Meeting, November 10–15, 2019, Hyatt Regency Orlando, Orlando, Florida, USA. Paper 703d, “Particle Technology in Product Design.” Published in the 2019 AIChE Annual Meeting Proceedings, ISBN 978-0-8169-1112-7, AIChE. 

2018

1. Mohammad Azad, Juan G. Osorio, David Brancazio, Gregory Hammersmith, David Klee, Kersten Rapp, and Allan Myerson, “Pharmacy on Demand: On-Demand Drug Product Manufacturing in a Miniaturized and Portable System,” presented at the 2018 AIChE Annual Meeting, October 28–November 2, 2018, David L. Lawrence Convention Center, Pittsburgh, Pennsylvania, USA. Paper 507d, “Developing Process Control Strategies for Drug Product Manufacture.” Published in Pharmaceutical Discovery, Development and Manufacturing Forum 2018 / 2018 AIChE Annual Meeting Proceedings, p. 290, AIChE; proceedings ISBN 978-1-5108-7610-1.