How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-30 · 6 min read · Independent comparison
• MOSWAG Earbuds — biggest strength: A 3.5mm gold-plated plug that fits almost anything with a headphone jack, and you get three pairs plus three storage bags in one package.
• MOSWAG Earbuds — biggest trade-off: No noise isolation at all, and it needs an adapter on phones that dropped the 3.5mm jack.
• Mutsrd USB C Headphones — biggest strength: A native USB-C plug with a built-in DAC chip, so it works with newer iPhones, iPads, Galaxy phones and MacBooks without an adapter.
• Mutsrd USB C Headphones — biggest trade-off: It is useless on anything with only a 3.5mm jack, and it is a single pair rather than a multi-pack.
• Who MOSWAG is for: Buyers who want a cheap-to-lose, go-anywhere wired pair for older phones, laptops, MP3 players and consoles.
• Who Mutsrd is for: Buyers who live entirely in USB-C land and want one clean cable for calls, music and gaming.
The MOSWAG Earbuds are the "throw one in every bag" option. The headline spec here is a 3.5mm gold-plated plug paired with a 120cm TPE cord that the manufacturer describes as tangle-free and reinforced against wear and corrosion. Inside, a 14.2mm dynamic driver covers a 20Hz–20KHz range at 32 ohm impedance. That impedance matters: 32 ohm is easy to drive, so you do not need a headphone amp to get decent volume out of a laptop, an MP3 player or a PlayStation 5 controller.
The package is the real story. You get three pairs of earbuds and three storage bags, which changes how you use them. Keep one in your work bag, one at your desk, one in the car. If you lose or break a pair, you are not starting from zero. The inline controller gives you a built-in microphone plus three buttons for play/pause, track skipping, call answer/hang-up and volume, so you rarely need to pull your phone out.
Compatibility is broad by design: iPhone 6s and older, Samsung Galaxy S8 through S10, A-series Galaxy models, Google Pixel 3a through 5a, OnePlus, Motorola, iPads, iMac, MP3/MP4 players and PS5. Anything with a 1/8-inch jack works, though some devices need an adapter.
Mutsrd USB C Headphones: Who It's For
The Mutsrd USB C Headphones solve the opposite problem: you own a device with no 3.5mm jack, and you want a wired connection without a dongle. The USB-C connector is metal-plated to reduce poor-contact issues, and there is a built-in DAC chip to keep the audio clean — the kind of detail that matters because a poorly implemented USB-C audio path is where buzzing and popping usually show up.
Compatibility is aimed squarely at current hardware: iPhone 17/16/15 in all trims, iPad Pro 2020–2023 and the 2024 M4 models, iPad Air, iPad Mini 6 and 7, MacBook and MacBook Pro, Samsung Galaxy S20 through S26 Ultra, the Z Fold and Z Flip lines, A-series Galaxy phones, and Google Pixel 2 through 6 Pro. If your daily carry is a USB-C phone or tablet, this cable just plugs in.
The controls are remote-based: volume up/down, previous/next track, pause, and answer/end/reject call. The inline mic makes it workable for calls while driving, walking or working. The ergonomic in-ear fit is designed to sit deeper than the MOSWAG semi-in-ear shape, which helps with stability and gives you passive noise cancellation — it blocks some outside sound by physically sealing the ear, though not as aggressively as active cancellation.
Two honest caveats. First, this is a single pair, not a multipack, so there is no backup. Second, the manufacturer's own notes mention an important first-time setup step for automatic reconnection, which suggests the pairing behavior is not entirely plug-and-forget on every device. And it simply will not work on a 3.5mm-only device like a PS5 controller or an older iPod. Age range is listed as kids and adults, and the cable runs 1 meter. Check the latest price on Amazon, since that is the deciding factor for most buyers here.
• Best for device coverage → MOSWAG Earbuds. A 3.5mm jack plus the listed iPhone, Galaxy, Pixel, iPad, iMac, MP3 and PS5 support covers nearly everything with a standard jack.
• Best for modern USB-C phones → Mutsrd USB C Headphones. iPhone 15/16/17, Galaxy S20–S26, Z Fold/Flip and Pixel 2–6 Pro all connect directly.
• Best for laptops and tablets → Mutsrd USB C Headphones if your machine is USB-C only; MOSWAG if you still have a 3.5mm port or are fine with an adapter.
• Best for blocking outside noise → Mutsrd USB C Headphones. It offers passive noise cancellation from the in-ear seal; MOSWAG has no noise control at all.
• Best for multiple users or backups → MOSWAG Earbuds. Three pairs and three storage bags in one package.
• Best for cable durability → tie, with a lean to Mutsrd. MOSWAG uses reinforced TPE; Mutsrd uses a strengthened cord and metal-plated connectors.
• Best for hands-free calls → either. Both have an inline mic and remote, though MOSWAG adds dedicated volume buttons on the cable.
• Best for gaming and recording → MOSWAG Earbuds. The low 32 ohm impedance and dedicated mic/controller suit consoles and voice work.
If I had to pick one, I would buy the MOSWAG Earbuds. Not because the sound is better on paper — both use dynamic drivers with a 20Hz–20KHz range — but because three pairs and three bags means you are covered everywhere, and 32 ohm impedance plays nicely with laptops, MP3 players and a PS5 controller. In my opinion, that flexibility is worth more than a single nicer cable. I would only switch to the Mutsrd USB C Headphones if every device I own is USB-C and I want the passive noise isolation and DAC-equipped connection. Check the current price on Amazon for both before you commit.
how to disconnect headphones from all devices
On wired earbuds like these two, there is nothing to disconnect — the MOSWAG and Mutsrd models are wired, so audio routing ends the moment you unplug the cable. Bluetooth-style "forget this device" steps only apply to wireless headphones, not to either product here.
how to make headphones forget all devices
Wired headphones do not store device pairings, so there is no memory to clear on the MOSWAG or Mutsrd models. If a device keeps routing audio to them, remove the entry in that phone or computer's audio settings instead.
how to unpair headphones from all devices
You cannot unpair wired earbuds because they never pair. For the Mutsrd USB C Headphones, the manufacturer notes the earphone reconnects automatically within a few seconds when you plug it back in, so the only "unpairing" is physically removing the USB-C plug.
how to listen to two devices at once with headphones
Neither the MOSWAG Earbuds nor the Mutsrd USB C Headphones support simultaneous playback from two sources — each has a single connector. MOSWAG uses one 3.5mm plug and Mutsrd uses one USB-C plug, so you switch devices by moving the cable, not by running both at the same time.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: FRESHME Noise Cancelling Ear vs CASCHO Ear Plugs, LC-dolida Sleep Headphones vs Hulaed Invisible Sleep Headphones, PAXA Stylish Open Ear vs YUEBAITU Extra Long Cord, Goshyda Earbuds vs Denash Lightweight Earhook Headset