2026.05.28_Congratulations! 竣欽's research work on "Development of multifunctional 3D nanostructure substrate with solid phase extraction and surface-enhanced Raman spectroscopy by two-stage sputtering and annealing process" is now published in Talanta !! 

Link：https://doi-org.ntust.idm.oclc.org/10.1016/j.talanta.2026.130021

2026.04.17_Congratulations! 資鑑's research work on "Double-sided structure collimation film (DSSCF) for direct-lit backlight in high-contrast liquid crystal display and 3D printing" is now published in Optical Materials Express !!  (Editors' Pick + News release)

Link：https://doi.org/10.1364/OME.593296

2026.03.16_Congratulations! 書瑋, 竣欽, 彥錡, 振岳’s research work on "Identification of the chili powder with illegal additive Sudan I by shifted-excitation Raman difference spectroscopy system" is now published in Food Chemistry !!  

Link：https://doi.org/10.1016/j.foodchem.2025.147767

2025.11.14_2025華立創新材料大賽 優選獎  (恭喜彥錡、仁傑、昱茹、振岳)

2025.11.06_114年精密工程論文競賽

114年精密工程專題與論文競賽_研究論文獎_金獎 (恭喜彥錡、仁傑)

114年精密工程專題與論文競賽_研究論文獎_佳作 (恭喜竣欽、昱茹)

2025.09.13_Congratulations! Sandeep, 奕璋, 聖硯’s research work on "Tunable Liquid Crystal Interface for Enhanced Surface Smoothness and Functional Properties in LCD Vat Photopolymerization" is now published in Advanced Materials Technologies !!  

Link：https://doi.org/10.1002/admt.202501215

2025.08.27_實驗室迎新送舊

2025.05.07_Congratulations! Sandeep, 冠緯, 震鴻’s research work on "Impact of Interface Flexibility on Separation Force in Liquid Crystal Display Vat Photopolymerization: A Comprehensive Analysis" is now published in the ACS Applied Polymer Materials !!  

Link：https://pubs.acs.org/doi/10.1021/acsapm.5c00167

2025.04.10_Congratulations! Sandeep, 冠緯, 震鴻’s research work on "Non‐Sticky Display Eliminates Surface Roughness and Interface Adhesion: Enabling Large‐Scale LCD‐Based 3D Printing" is now published in Small !!  (Editor’s Choice)

Link： DOI: 10.1002/smll.202502046

2025.02.18_Congratulations! Sandeep’s research on "Novel vat design for liquid crystal display vat photopolymerization: reduction of separation force and pixelated effect" is now published in Virtual and Physical Prototyping.

Link：https://doi.org/10.1080/17452759.2025.2470920

2024.12.18_Congratulations! 哲維’s collaborative research work with Professor Huang on "Label-free pathogen DNA sensing based on the anodic aluminum oxide (AAO) transferred localized surface plasmon resonance (LSPR) sensor integrating the automated microfluidics and spectra mapping acquisition" is now published in Surfaces and Interfaces.

Link：https://doi.org/10.1016/j.surfin.2024.105675

2024.11.14_113年精密工程論文競賽

113年精密工程專題與論文競賽_研究論文獎_銀獎 (恭喜聿雅、許傑)

113年精密工程專題與論文競賽_研究論文海報獎_佳作 (恭喜哲維、昱茹)

2024.11.12_Congratulations! Sandeep, 震鴻, 冠緯 ’s research work on "Nanoscale roughness to mitigate polydimethylsiloxane (PDMS) sticking in liquid crystal display (LCD) vat photopolymerization (VPP): Separation force reduction without losing resolution" is now published in the Applied Surface Science !! 

Link：https://doi.org/10.1016/j.apsusc.2024.161773

2024.8.22_Congratulations! 卓夫, 凱鈞’s research work on "Silver microplasma-engineered nanoassemblies on periodic nanostructures for SERS applications" is now published in the Physical Chemistry Chemical Physics !!  (The Front Cover of PCCP vol 26, Issue 38, 2024 )

Link：https://doi.org/10.1039/D4CP02723J

2024.08.19_實驗室大掃除暨迎新送舊

2024.8.6_Congratulations!!! 資艦, 柏廷 ’s research work on "Development of single-sided structure collimation film for direct-lit collimated backlight module" is now published in the Optics Express.

Link：https://doi.org/10.1364/OE.533768

2024.7.7_Congratulations!!! 昱茹’s collaborative research work with Professor Liu on "Electrochemically deposited Aunano-island on laser-scribed graphene substrates as EC-SERS biochips for uremic toxins detection" is now published in the Journal of the Taiwan Institute of Chemical Engineers.

Link：https://doi.org/10.1016/j.jtice.2024.105657

2024.6.25_Congratulations!!! 恆譯, 凱鈞, 聿雅 ’s research work on "Low power density, high-efficiency reflective Raman system for polymer SERS substrates" is now published in the RSC Advances.

Link：https://doi-org.ntust.idm.oclc.org/10.1039/D4RA03874F

2023.11.30_112年精密工程論文競賽

112年精密工程專題與論文競賽_研究論文獎_佳作 (恭喜春鴻、冠緯 )

112年精密工程專題與論文競賽_研究論文海報獎_佳作 (恭喜凱鈞、聿雅)

2023.10.27_Congratulations!!! 煥文, 書瑋’s research work on "Development of an automated Raman system and use of principal component analysis to classify real and counterfeit liquors" is now published in the RSC Advances.

Link：https://doi.org/10.1039/D3RA06057H

2023.10.18_Congratulations!!! 勁衡, 春鴻’s research work on "Optimization of physical vapor deposition process for low background nanoimprinted SERS substrate in quantitative melamine analysis" is now published in the Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy.

Link：https://doi.org/10.1016/j.saa.2023.123563

2023.08.31_實驗室大掃除暨迎新送舊

2023.8.21_Congratulations!!! 卓夫’s collaborative research work with Professor Cheng on "Pore evolution and size effect of nanoporous silver on SERS for malachite green detection" is now published in Applied Surface Science.

Link：https://doi.org/10.1016/j.apsusc.2023.158306

2023.6.20_Congratulations!!! 秉閎, 資艦’s collaborative research work with Professor Jeng on "Design and fabrication of large area vat photopolymerization 3D printing system using a 32-inch quasi-collimated visible backlight module with local dimming control" is now published in the Additive Manufacturing.

Link：https://doi.org/10.1016/j.addma.2023.103665

2023.6.17_Congratulations!!! Sandeep’s collaborative research work with Professor Jeng on "Review of Critical Issues in High-Speed Vat Photopolymerization" is now published in the Polymer.

Link：https://www.mdpi.com/2073-4360/15/12/2716

2023.03.24_實驗室第四階段小工程(儀器架製作)

2022.11.05_台灣鍍膜學會年會_海報論文競賽佳作 (恭喜卓夫、王佑)

2022.11.22_111年精密工程專題與論文競賽_金獎 (恭喜勁衡、春鴻)

2022.12.24_第十九屆上銀科技機械碩士論文獎_進入第三階段決賽(全國30強) (恭喜資鑑)

2022.09.01_迎新送舊

2022.08.04_實驗室第三階段工程完工 (吊運光學桌)

2022.07_第一屆畢業生

2022.4.20_Congratulations!!! 金銘, 資艦, 秉閎’s collaborative research work with Professor Jeng on "Development of a quasi-collimated UV LED backlight for producing uniform and smooth 3D printing objects" is now published in the Optics Express.

Link：https://doi.org/10.1364/OE.454018

2021.06.24_正式更換實驗室招牌

2021.05.11 完成緩衝區(air shower)安裝

2021.04.23_實驗室第二階段工程完工 (實驗區)

2021.02.05_完成網路伺服器移機

2020.09.04_完成第一階段實驗室工程 (座位區)

2020.02.24_完成實驗室網頁(初版)