Publications

Domestic Peer-reviewed Journals

#30

Structural Peformance Evaluation of I-shaped Beam Members Considering Local Buckling Collapse Mode

K. Mitsui, K. Ikarashi

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 90, No. 835, pp. 1085–1096, 2025. 9

#29

Effect of Member Geometry and Boundary Condition of Plate End Edges on Relationship between Elastic Buckling Strength and Ultimate Strength of Cold-formed Thin-walled Steel Members

K. Mitsui, K. Ikarashi, H. Mitsuhiro... 3 more

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 90, No. 833, pp. 843–854, 2025. 7

#28

Elastic Shear Buckling Strength of H-shaped Members under Pure Shear Force

R. Kuwada, K. Mitsui

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 89, No. 821, pp. 780–787, 2024. 7

#27

Strength of Bolted Steel Structural Members under Eccentric Tension

H. Haikata, K. Ikarashi, K. Mitsui

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 89, No. 820, pp. 639–650, 2024. 7

#26

Elastic Flexural Buckling Strength of Built-up Cold-formed Steel Members with Various Cross-sectional Components

T. Kobashi, K. Mitsui

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 89, No. 817, pp. 342–353, 2024. 3

#25

Effect of Loading Protocol on Deteriorating Behavior due to Local Buckling of Box-section Steel Members

K. Mitsui, I. Matsumoto, K. Ikarashi

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 88, No. 813, pp. 1569–1580, 2023. 11

#24

Elastic Local Buckling Strength of I-shaped Beam Web Plates Subjected to End Moments and Uniformly Distributed Load

T. Nakano, K. Mitsui, K. Ikarashi

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 88, No. 806, pp. 687–698, 2023. 5

#23

Influence of Upper Flange Continuous Restraint Condition on Plastic Deformation Capacity of I-shaped Beams

K. Ikarashi, K. Mitsui, H. Kagesawa... 5 more

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 88, No. 805, pp. 519–530, 2023. 4

#22

Strength and Behavior of Elastic Distortional Buckling for Cold-formed Channel Member under Compression

K. Mitsui, K. Ikarashi, T. Kobashi, R. Kuwada

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 87, No. 791, pp. 139–148, 2022. 1

#21

Buckling Strength and Behavior of Elastic Local Buckling for Cold-formed Channel Member under Compression

K. Mitsui, K. Ikarashi

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 86, No. 790, pp. 1685–1592, 2021. 12

#20

Strength of Bolted Steel Structural Members under Eccentric Tension

K. Nagasato, K. Ikarashi, K. Mitsui

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 86, No. 789, pp. 1570–1580, 2021. 11

#19

Elastic Coupled Local Buckling Strength of Wide Flange Shapes under Uniform Bending

K. Mitsui, R. Kuwada

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 86, No. 787, pp. 1369–1379, 2021. 9

#18

Required Number of Self-drilling Screws for Light Gauge Built-up Compression Members to Ensure Fexural Buckling as a Unit Member

K. Mitsui, A. Sato, K. Ikarashi

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 86, No. 784, pp. 979–990, 2021. 6

#17

Coupled Local Buckling Strength of H-shaped Members under Compression

K. Mitsui, R. Kuwada

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 86, No. 782, pp. 619–629, 2021. 4

#16

Coupled Local Buckling Strength of H-shaped Members under Compression

K. Mitsui, A. Watanabe, T. Kobashi, K. Ikarashi

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 86, No. 779, pp. 157–167, 2021. 1

#15

Local Buckling Strength and Plastic Deformation Capacity of Vertical Haunch H-shaped Beam under Shear Bending

W. Ishida, K. Ikarashi, K. Mitsui

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 85, No. 778, pp. 1655–1665, 2020. 12

#14

Buckling Behavior of H-shaped Beam with Continuous Restraint Installed Transverse Stiffeners and Method for Deciding Stiffening Position

N. Igawa, K. Ikarashi, K. Mitsui

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 85, No. 777, pp. 1491–1501, 2020. 11

#13

Evaluation Method of Ultimate Strength for L-shaped Beam-to-column Joint Panels Composed with I-shaped Members

K. Ikarashi, Y. Utsuki, K. Mitsui... 2 more

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 85, No. 774, pp. 1079–1089, 2020. 8

#12

Buckling Behavior of Web Stiffened by Longitudinal Stiffeners and Design Method for Longitudinal Stiffeners

K. Ikarashi, N. Igawa, Y. Yanagishita, K. Mitsui

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 85, No. 773, pp. 957–967, 2020. 7

#11

Elastic Shear Buckling Strength of L-shaped Beam-to-column Joint Panels Composed with I-shaped Members

K. Ikarashi, Y. Utsuki, K. Mitsui

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 85, No. 771, pp. 759–769, 2020. 5

#10

Structural Performance Evaluation of Square Steel Tubular Column under Compressive Axial Force with Bending Moment

A. Sato, K. Inden, K. Mitsui

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 83, No. 751, pp. 1365–1372, 2018. 9

#9

Experimental Study on Square Steel Tubular Columns under Compressive Axial Force with Monotonic Double Curvature Bending Moment -In Case of End Bending Moment Ratio Equal to 0.5-

A. Sato, K. Inden, K. Mitsui

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 83, No. 747, pp. 739–749, 2018. 5

#8

Effect of Initial Imperfection on Elasto-plastic Behavior of Square Steel Tubular Columns under Compressive Axial Force with Monotonic Antisymmetric Bending Moment

A. Sato, K. Mitsui, M. Aoyama, K. Inden

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 82, No. 741, pp. 1787–1797, 2017. 11

#7

Effect of Initial Imperfection on Elasto-plastic Behavior of Square Steel Tubular Columns under Compressive Axial Force with One End Monotonic Bending Moment

A. Sato, K. Mitsui, M. Aoyama

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 82, No. 736, pp. 929–939, 2017. 6

#6

Experimental Study on Square Steel Tubular Columns under Compressive Axial Force with One End Cyclic Bending Moment

A. Sato, K. Mitsui

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 82, No. 735, pp. 701–711, 2017. 5

#5

Experimental Study on Square Steel Tubular Columns under Compressive Axial Force with Monotonic Antisymmetric Bending Moment

A. Sato, K. Mitsui

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 82, No. 735, pp. 267–277, 2017. 2

#4

Experimental Study on Square Steel Tubular Columns under Compressive Axial Force with One End Monotonic Bending Moment

A. Sato, K. Mitsui

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 81, No. 729, pp. 1933–1943, 2016. 11

#3

Flexural Buckling Strength of Steel Angle Member with Eccentric Joint

A. Sato, K. Mitsui, T. Ono

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 81, No. 726, pp. 1343–1353, 2016. 8

#2

Experimental Study on Deformation Capacity of Square Steel Tubular Columns under Constant Axial Force with Bending Moment

K. Mitsui, A. Sato

Journal of Structural Engineering B

Vol. 62B, pp. 433–440, 2016. 3

#1

Flexural Elastic Buckling Stress of Batten Type Light Gauge Built-up Compression Member -Modified effective slenderness ratio of built-up compression member Part 1-

A. Sato, K. Mitsui, H. Okada, T. Ono

Journal of Structural and Construction Engineering (Transactions of AIJ)

Vol. 80, No. 714, pp. 1307–1317, 2015. 8

International Peer-reviewed Journals

#10

Strength and Behavior of Elastic Critical Distortional Buckling for Cold‐Formed Channel Member Under Compression

K. Mitsui, K. Ikarashi, T. Kobashi, R. Kuwada

Japan Architectural Review, WILEY, Vol. 8, Issue 1, ID: e70024, 2025. 5

#9

Elastic Critical Buckling Coefficients for Skew Plates of Steel Structures under Biaxial Normal Stress

K. Mitsui, K. Ikarashi, K. Sada

Buildings, MDPI, Issue 14(1), ID: 901, 2024. 3

#8

Elastic critical local buckling load and behavior of local buckling for cold‐formed lipped channel steel member under compression

K. Mitsui, K. Ikaraashi

Japan Architectural Review, WILEY, Vol. 7, Issue 1, ID: e12432, 2024. 2

#7

Strength of bolted steel structural members under eccentric tension

K. Nagasato, K. Ikaraashi, K. Mitsui

Japan Architectural Review, WILEY, Vol. 6, Issue 1, ID: e12409, 2023. 10

#6

Elastic critical local buckling stress in cold-formed lipped channel and hat sections under uniform compression

K. Mitsui, K. Ikarashi, T. Kobashi, R. Kuwada

Thin-Walled Structures, ELSEVIER, Vol. 191, ID: e111064, 2023. 8

#5

Elastic coupled local buckling strength of I-shaped steel member in uniform bending

K. Mitsui, R. Kuwada・Japan Architectural Review, WILEY, Vol. 6, Issue 1, ID: e12355, 2023. 4

#4

Required number of self-drilling screws for built-up column comprising cold-formed lipped channel sections to ensure flexural buckling as a single unit member

K. Mitsui, A. Sato, K. Ikaraashi

Japan Architectural Review, WILEY, Vol. 6, Issue 1, ID: e12354, 2023. 4

#3

Elastic Shear Buckling Coefficients for Oblique Plates

K. Mitsui, K. Ikaraashi

Mathematical Problems in Engineering, WILEY, Vol. 2022, ID: 9532380, 2022. 9

#2

Experimental and Numerical Analysis of the Ultimate Behaviour of Square Hollow Sections under Combined Axial and Bending Loads

K. Mitsui, M. Latour, G. Rizzano, A. Sato, V. Piluso

Ingegneria Sismica International Journal of Earthquake Engineering, Vol. 2018, Issue 2, pp. 5–22, 2018. 1

#1

Flexural Elastic Buckling Stress of Batten Type Light Gauge Built-up Member

K. Mitsui, A. Sato

Civil and Environmental Engineering Reports, Vol. 25, pp. 161–172, 2017. 2

Proceeding of Domestic Conference

#15

Elastic Local Buckling of Plates with Circular Holes Subjected to Nonuniform Bending

R. Watanabe, K. Ikarashi, K. Mitsui

Proceedings of Constructional Steel, Vol. 32, pp. 253–261, 2024. 11

#14

Buckling Strength of Lipped Channel Members Subjected to Axial Compression on the Web

T. Kobashi, K. Mitsui

Proceedings of Constructional Steel, Vol. 32, pp. 262–269, 2024. 11

#13

Cyclic Behaviros of L-shaped Beam-column Conection Oblique Plates

K. Sada, K. Ikarashi, K. Mitsui

Proceedings of Constructional Steel , Vol. 32, pp. 309–317, 2024. 11

#12

Single-Lap Shear Tests of Steel Structure Connections Utilizing Adhesive

R. Hasegawa, K. Ikarashi, K. Mitsui... 5 more

Proceedings of Constructional Steel, Vol. 32, pp. 369–375, 2024. 11

#11

Effect of Material Constitutive Model on Cyclic History Behavior of High-Strength Box-Section Members

I. Matsumoto, K. Mitsui, K. Ikarashi

Proceedings of Constructional Steel, Vol. 31, pp. 490–498, 2023. 11

#10

Elastic Critical Buckling Load of Oblique Panels Subjected to Bidirectional Compressive Forces

K. Sada, K. Mitsui, K. Ikarashi

Proceedings of Constructional Steel, Vol. 31, pp. 609–615, 2023. 11

#9

Effect of Amplitude under Cyclic Loadings to Collapse Behaviors of I-Shaped Steel Beams

K. Mori, K. Mitsui, K. Ikarashi

Proceedings of Constructional Steel, Vol. 31, pp. 673–680, 2023. 11

#8

Buckling Behavior and Ultimate Resistance of Cold-Formed Lipped Channel Members under Eccentric Compression

R. Makieda, K. Mitsui, K. Ikarashi

Proceedings of Constructional Steel, Vol. 31, pp. 681–687, 2023. 11

#7

Elastic Buckling of Parallelogram Connection Panels Subjected to Shear Forces

T. Aratani, K. Mitsui, K. Ikarashi

Proceedings of Constructional Steel, Vol. 30, pp. 482–488, 2022. 11

#6

Bolted Connection Strength Consist of Built-up Angle Members Subjected to Tensile Force

H. Haikata, K. Ikarashi, K. Mitsui

Proceedings of Constructional Steel, Vol. 30, pp. 489–496, 2022. 11

#5

A Study on Distortional Buckling of Light Gauge Member

K. Mitsui, K. Ikarashi, T. Kobashi, R. Kuwada

Proceedings of Constructional Steel, Vol. 29, pp. 308–317, 2021. 11

#4

Plastic Deformation Capacity of Stiffened Vertical Haunch I-shaped Beam

T. Fukuda, K. Ikarashi, K. Mitsui

Proceedings of Constructional Steel, Vol. 29, pp. 334–340, 2021. 11

#3

Elastic Local Buckling Properties of H-shaped Beams Subjected to End Moments and Uniformly Distributed Load

T. Nakano, K. Ikarashi, K. Mitsui

Proceedings of Constructional Steel, Vol. 29, pp. 384–392, 2021. 11

#2

Application of Buckling Strength Evaluation Method of Plate on Elastic Foundation to Sandwich Panel

H. Mitsuhiro, K. Ikarashi, K. Mitsui

Proceedings of Constructional Steel, Vol. 28, pp. 895–901, 2020. 11

#1

Effect of Restrain for Lateral Torsional Buckling on Buckling Behavior of I-shaped Beams with Continuous Lateral Restrains on Upper Flange

H. Kagesawa, K. Ikarashi, K. Mitsui, M. Uchida, F. Ito

Proceedings of Constructional Steel, Vol. 28, pp. 786–793, 2020. 11

Proceeding of International Conference

#26

Theoretical derivation of elastic local buckling load formulae of I-shaped steel girders considering web-flange interaction

R. Kuwada, K. Mitsui

IABSE Symposium Tokyo 2025, 2025. 5

#25

AIJ structural stability topics in steel structures: summary of the AIJ-SSRC collaboration

M. Kurata, R. Matsui, A. Sanchez, M. Kido, Y. Kimura, K. Mitsui, H. Tagawa

Proceedings of the Annual Stability Conference Structural Stability Research Council, 2025. 4

#24

Influence of Circular Web Opening Configurations on Elastic Buckling Behavior of I-shaped Steel Members

R. Watanabe, K. Ikarashi, K. Mitsui

The 25th Taiwan-Korea-Japan Joint Seminar on Earthquake Engineering for Building Structures (SEBUS2024), 2024. 10

#23

Single-Lap Shear Tests of Steel Structure Connections Utilizing Adhesive

R. Hasegawa, K. Ikarashi, K. Mitsui

The 25th Taiwan-Korea-Japan Joint Seminar on Earthquake Engineering for Building Structures (SEBUS2024), 2024. 10

#22

Effect of Amplitude of Cyclic Loading on the Collapse Modes of I-Shaped Beams with Local Buckling

K. Mori, K. Ikarashi, K. Mitsui

Proceedings of the 11th International Conference of Behaviour of Steel Structures in Seismic Areas, pp. 257–267, 2024. 7

#21

Influence of Eccentricity on Elastic Critical Buckling Load and Behavior of Cold-Formed Steel Lipped Channel Columns

R. Makieda, K. Mitsui, K. Ikarashi

Proceedings of the 11th International Conference of Behaviour of Steel Structures in Seismic Areas, pp. 56–67, 2023. 7

#20

Effect of Assembly Types on Bolted Connection Strength Consist of Built-up Angle Members under Monotonic Tensile Force

H. Haikata, K. Ikarashi, K. Mitsui

The 24th Taiwan-Korea-Japan Joint Seminar on Earthquake Engineering for Building Structures (SEBUS2023), 2023. 12

#19

A Novel Evaluation Method for Plate Buckling Coefficients in Cold-Formed Steel Members

K. Mitsui

The 7th Joint Workshop on Building/Civil Engineering between Tongji and Tokyo Tech, 2023. 8

#18

Effect of Assembly Types on Bolted Connection Strength Consist of Built-up Angle Members under Monotonic Tensile Force

H. Haikata, K. Ikarashi, K. Mitsui

The 23rd Taiwan-Korea-Japan Joint Seminar on Earthquake Engineering for Building Structures (SEBUS2022), 2022. 12

#17

Effect of Loading Protocol on Hysteretic Response and Stiffness Deterioration of Steel Hollow Structural Section Columns

I. Matsumoto, K. Mitsui, K. Ikarashi

The 23rd Taiwan-Korea-Japan Joint Seminar on Earthquake Engineering for Building Structures (SEBUS2022), 2022. 12

#16

Elastic Local Buckling Strength of Wide Flange Beams Web Subjected to End Moment and Distributed Load

T. Nakano, K. Ikarashi, K. Mitsui

The International Colloquium on Stability and Ductility of Steel Structures SDSS 2022, pp. 941–947, 2022. 9

#15

Design limitations for the steel beam-column to ensure full plastic moment

H. Kagesawa, K. Ikarashi, K. Mitsui

The 22nd Taiwan-Korea-Japan Joint Seminar on Earthquake Engineering for Building Structures (SEBUS2021), pp. 26–32, 2021. 9

#14

Buckling Strength Evaluation Method of Plate on Elastic Foundation and Its Application to Sandwich Panels

H. Mitsuhiro, K. Ikarashi, K. Mitsui

The 22nd Taiwan-Korea-Japan Joint Seminar on Earthquake Engineering for Building Structures (SEBUS2021), pp. 33–40, 2021. 9

#13

Distortional Buckling of Cold-Formed Channel Member under Compression

K. Mitsui, K. Ikarashi, T. Kobashi, R. Kuwada

The 22nd Taiwan-Korea-Japan Joint Seminar on Earthquake Engineering for Building Structures (SEBUS2021), pp. 126–135, 2021. 9

#12

Theoretical Analysis of Elastic Local Buckling for H-Shaped Beams Subjected to End Moments and Uniformly Distributed Load

T. Nakano, K. Ikarashi, K. Mitsui

The 22nd Taiwan-Korea-Japan Joint Seminar on Earthquake Engineering for Building Structures (SEBUS2021), pp. 145–154, 2021. 9

#11

Design limitations for the steel beam-column to ensure full plastic moment

A. Sato, M. Aoyama, K. Inden, K. Mitsui

The International Colloquium on Stability and Ductility of Steel Structures SDSS 2019, pp. 963–971, 2019. 9

#10

Flexural Buckling Strength of Steel Angle Member with Eccentric Joint

K. Mitsui, A. Sato

Electrical Transmission & Substation Structures Conference 2018, 2018. 11

#9

Experimental Analysis and FE Modeling of Square Hollow Sections under Combined Axial and Bending Loads

K. Mitsui, A. Sato, M. Latour, V. Piluso, G. Rizzano

EURO STEEL 2017 8th European Conference on Steel and Composite Structures, pp. 4732–4739, 2017. 9

#8

Experimental Study on Square Steel Tubular Columns under Compressive Axial Force with Monotonic Antisymmetric Bending Moment

M. Aoyama, K. Mitsui, A. Sato

EURO STEEL 2017 8th European Conference on Steel and Composite Structures, pp. 1096–1105, 2017. 9

#7

Effect of Initial Imperfection on Elasto-plastic Behavior of SHS Columns under Axial Force with Bending Moment

K. Mitsui, A. Sato, M. Aoyama

EURO STEEL 2017 8th European Conference on Steel and Composite Structures, pp. 1123–1132, 2017. 9

#6

Modified Effective Slenderness Ratio for Light Gauge Built-up Member

K. Mitsui, A. Sato

7th International Conference on Coupled Instabilities in Metal Structures, Vol. 16, pp. 1–16, 2016. 11

#5

The Effect of Steel Properties on Deformation Capacity of HSS Columns

A. Sato, K. Mitsui

XIII International Conference on Metal Structures, pp. 223–230, 2016. 6

#4

Flexural Elastic Buckling Stress of Light Gauge Built-up Member

K. Mitsui, A. Sato, H. Okada, T. Ono

XIII International Conference on Metal Structures, pp. 83–91, 2016. 6

#3

Study on Deformation Capacity of Square Steel Tubular Columns

K. Mitsui, A. Sato

The International Colloquium on Stability and Ductility of Steel Structures (SDSS 2016), pp. 973–980, 2016. 5

#2

Modified Effective Slenderness Ratio for Light Gauge Built-up Compression Member

K. Mitsui, A. Sato, H. Okada, T. Ono

The 17th Taiwan-Korea-Japan Joint Seminar on Earthquake Engineering for Building Structures (SEEBUS2015), Vol. 28, pp. 121–131, 2015. 9

#1

Study on Flexural Buckling Stress of Built-up Compression Member Composed with Light Gauge Members

K. Mitsui, A. Sato, H. Okada, T. Ono

EURO STEEL 2014 7th European Conference on Steel and Composite Structures, pp. 173–174, 2014. 9

Page updated

Google Sites

Report abuse