Embedded Files
Started with the 3D printing.
A startup from Lahore really inspired me who created the structure of the 3D printer from Acrylic sheets. In video, it looked awesome. It is cheap.
Most of the 3D printers available in Pakistan are the imported ones. I want to support the local products and as a beginner do not want to go for an expensive option.
So ordered my first 3D printer.
Markhor 3D (v1) - 9500 PKR
Markhor 3D (v1) - 9500 PKR
It came in three parts. Assembled it easily.
The motors look great.
The tap that you see on top is used to hold the PCB.
The motors look great.
The tap that you see on top is used to hold the PCB.
The Z-axis limit switch was somehow broken.
Replaced it with a new one (got from a colleague).
Replaced it with a new one (got from a colleague).
Was able to do this a first 3D print.
This is a 3D design from the startup. It has its logo and M3D written on it.
The bottom of the object is messy.
This is a 3D design from the startup. It has its logo and M3D written on it.
The bottom of the object is messy.
The Z-axis upward movement is controlled by a rubber band in the video. But my package does not come with that rubber band.
I put one in another position, but the printer is still struggling to move in the upward direction.
Talked to Guy in the startup. He is helpful and provide good support on phone. He offered to send back this model to him and we will send you a new model with some extra cost.
Agreed.
Markhor 3D v1 abandoned.
Markhor 3D Enabler (v2) - 16,000 PKR
Markhor 3D Enabler (v2) - 16,000 PKR
Received the package of Markhor 3D Enabler.
Its in one piece this time.
It looked nice and clean.
It has a spring to support the Z-axis. A good improvement from the rubber band to the spring.
The electronics went to the bottom of the printer, which is great. I like the design.
A Power button at the bottom of the printer.
The software that is used with the Markhor3D is a free software. Ultimaker Cura.
Also the printer can be accessed online.
Connect it to Wifi, and access via markhor3d.local. This is adapted from an open source ESP api. The software part works smooth as long as the manual movement of the motors is done.
The heating system is also fine.
Somehow the filament is not coming out of the printer nozzle.
Spent more than a week on it. But failed to do the first print.
The nozzle is jammed.
The motor could not push the filament properly into the heating system. and of course it is because of the blockage.
Wanted to remove the blockage. Opened many part, and somehow damaged the nozzle. I think I made the 0.4mm nozel 20mm with a screwdriver. :D
Abandoned this printer too.
Exploring the imported options now.
Ender has covered the internet. The youtube is full of Ender.
I found it to be the most popular printer.
Also I am following Scott Yu-Jan youtube channel from a long time now.
https://www.youtube.com/@ScottYuJan
which is where I got interested into 3D printing.
Ender 3 pro seemed like an option.
Surprisingly SYJ also used an Ender 3 pro.
Got convinced from a lot of videos. I definitely need an Ender 3 pro.
PAKISTAN Issues in Action.
How to buy an imported item in Pakistan. You have to overpay. Taxes. Third party charges. multiple shipping. bla bla.
Rest of the blog in Google Doc below.
Page updated
Google Sites
Report abuse