Role of dynamically precipitated long-period stacking ordered (LPSO) plates on the creep behavior of hot-extruded Mg-Zn-Y alloys with multimodal microstructureJournal of Materials Research and Technology, 36 (2025) 8492-8502https://doi.org/10.1016/j.jmrt.2025.05.116
Takahiro Mineta, Seita Shibata, Kouya Kyan, Hiroyuki Sato
Al concentration dependence of creep deformation behavior of heat-treated BCC Mg-Li-Al alloy strengthened by spinodal decompositionMaterials Today Communications, 46 (2025) 112691https://doi.org/10.1016/j.mtcomm.2025.112691
Improved mechanical properties and extraordinary plastic isotropy of ultrafine-grained pure Zn prepared by spark plasma sintering using fine particle and heat treatmentMaterials Science and Engineering: A, 929 (2025) 148097https://doi.org/10.1016/j.msea.2025.148097
Creep deformation behavior and microstructure of α-Mg/long-period stacking ordered (LPSO) duplex Mg-Y-Zn alloy prepared by hot extrusion and heat treatmentMaterials Today Communications, 39 (2024) 108912https://doi.org/10.1016/j.mtcomm.2024.108912
Takahiro Mineta
Review - Materials Design for Improving Mechanical Properties of Ultra-Lightweight Mg-Li Based AlloysMaterials Transactions, 65 (2024) 455-465https://doi.org/10.2320/matertrans.MT-L2023021
Takahiro Mineta, Haruto Saijo, Seita Shibata, Seri Nakaya, Hiroyuki Sato
Transition of superplastic and dislocation creep of duplex Mg–Li–Al–Zn alloyMaterials Science and Engineering: A, 886 (2023) 145714https://doi.org/10.1016/j.msea.2023.145714
Takahiro Mineta, Ryusuke Suzumura, Akihiro Konya, Hiroyuki Sato
Effect of strain-induced grain boundary migration on microstructure and creep behavior of extruded AZ31 magnesium alloy prepared by pre-compression and annealing treatmentMaterials Today Communications, 34 (2023) 105502https://doi.org/10.1016/j.mtcomm.2023.105502
Takahiro Mineta
Analysis of indentation stress-strain response of copper by in-situ observation using optical indentation microscopyResults in Engineering, 15 (2022) 100547https://doi.org/10.1016/j.rineng.2022.100547
Takahiro Mineta, Haruto Saijo, Hiroyuki Sato
High temperature creep deformation behavior of heat-treated (α+β)-Mg-9Li-4Al-1Zn alloyJournal of Alloys and Compounds, 910 (2022) 164938https://doi.org/10.1016/j.jallcom.2022.164938
Preparation of Ultra High Purity Magnesium Sheet by Vacuum Distillation, Extrusion and Forging Transactions on GIGAKU, 8 (2021) 1-6 https://doi.org/10.34468/gigaku.8.1_08003-1
Takahiro Mineta, Shintaro Torii, Kohei Nagayama, Hiroyuki Sato
Effect of passivation treatment and arc current on the properties of Zn fine particles prepared by arc plasma methodPowder Technology, 308 (2021) 1-6https://doi.org/10.1016/j.powtec.2021.04.065
Takahiro Mineta, Kazuma Kumatani, Hiroki Adachi, Hiroyuki Sato
Dependence of the mechanical properties and microstructure of ultralight magnesium–lithium–aluminum alloy on heat treatment conditions Material Science and Engineering Technology, 52 (2021) 339-345 https://doi.org/10.1002/mawe.202000250
Takahiro Mineta
Surface treatment and electron backscatter diffraction (EBSD) analysis of the body-centered cubic phase in Mg-Li based alloys processed by severe plastic deformationMicron, 137 (2020) 102914 https://doi.org/10.1016/j.micron.2020.102914
High strength and plastic deformability of Mg-Li-Al alloy with dual BCC phase produced by a combination of heat treatment and multi-directional forging in channel die Materials Science and Engineering: A, 773 (2020) 138867 https://doi.org/10.1016/j.msea.2019.138867
Anode-Side Failure of a Cuprous Oxide Semiconductor Caused by High-Density Current Loading Journal of Electronic Materials, 48 (2019) 6949-6953 https://doi.org/10.1007/s11664-019-07540-9
Takahiro Mineta, Tatsuya Saito, Takahiro Yoshihara, Hiroyuki Sato
Structure and mechanical properties of nanocrystalline silver prepared by spark plasma sintering Materials Science and Engineering: A, 754 (2019) 258-264 https://doi.org/10.1016/j.msea.2019.03.101
Takahiro Mineta, Tatsuya Saito, Takahiro Yoshihara, Hiroyuki Sato
Application of Modified Optical Indentation Microscopy as New In Situ Indentation Method Materials Transactions, 60 (2019) 1416-1422 https://doi.org/10.2320/matertrans.MD201904
Takahiro Mineta, Hiroyuki Sato
Simultaneously improved mechanical properties and corrosion resistance of Mg-Li-Al alloy produced by severe plastic deformation Materials Science and Engineering: A, 735 (2018) 418-422 https://doi.org/10.1016/j.msea.2018.08.077
Plastic Deformation Behavior of Mg-Y Alloy Single Crystals Observed Using In Situ Brinell Indentation Materials Transactions, 59 (2018) 602-611 https://doi.org/10.2320/matertrans.M2017336
Impact and Solidification of Molten Sn-Pb Drops on Sapphire at Different TemperaturesThe 12th International Conference on Multiphase Flow, Toulouse 2025年5月14日
Comparison of Creep Characteristics of HEA Cantor Alloy and Binary Solid Solution AlloysInternational Conference on Creep and Fracture of Engineering Materials and Structures, India 2024年7月29日
Development of Mg-Zn alloys with low impurities by vacuum distillation and extrusion for excellent corrosion resistanceThe 11th Pacific Rim International Conference on Advanced Materials and Processing, Jeju 2023年11月20日
Takahiro Mineta, Kaoru Hasegawa, Haruto Saijo, Seita Shibata, Hiroyuki Sato
Simultaneously improved strength and plastic deformability of Mg-Li-Al alloy for biomaterial applicationThe 7th International Symposium on Biomedical Engineering (ISBE2022), Online 2022年11月25日
Objective Evaluation of Shape of Transient Creep Curve in CrMnFeCoNi HEA at around 0.65Tm by SATO-index Tenth International Conference on Materials Structure & Micromechanics of Fracture (MSMF10), Brno 2022年9月12日
Preparation of Ultra High Purity Magnesium Sheet by Vacuum Distillation, Extrusion and ForgingThe 5th International Conference on “Science of Technology Innovation”, Nagaoka 2020年10月31日