Results in Physics - Elsevier - ISSN: 2211-3797 

Advances in Mechanical Engineering - SAGE - ISSN: 1687-8140

SN Applied Sciences - Springer - ISSN: 2523-3971

Publons WebPage

Just Get in Touch

Advances in Mechanical Engineering - SAGE - ISSN: 1687-8140

Smart Materials and Structures - IOPScience - ISSN: 0964-1726

Materials Research Express - IOPScience - ISSN: 2053-1591

Engineering Research Express - IOP Science - ISSN: 2631-8695

Publons WebPage

Join World Community Grid

Institute of Research Engineers and Doctors

Advances in Mechanical Engineering - SAGE - ISSN: 1687-8140

Materials Research Express - IOPScience - ISSN: 2053-1591

Machining Science and Technology - Taylor & Francis - ISSN: 1532-2483

“Development of a Peristaltic Rotary Magneto-Rheological Brake for Force-Feedback Systems”

Department of Mechanical Engineering, University of Economics and Technology, TR

"Design and Multi-Physics Optimization of Rotary MRF Brakes",

Results in Physics,

digital object identifier LINK,

"Modeling and Experimental Evaluation of a Rotary Peristaltic MRF Device with Low Off-State Torque for Haptic Interfaces",

Journal of the Brazilian Society of Mechanical Sciences and Engineering,

digital object identifier LINK,

Results in Physics - Elsevier - ISSN: 2211-3797

Transactions on Haptics - IEEE - ISSN: 1939-1412

Materials Research Express - IOPScience - ISSN: 2053-1591

Department of Industrial Design, University of Economics and Technology, TR 

“an Adjustable Dashpot / Amortisseur réglable”,

TR201515094A2, WO2017091171A1,

Department of Mechanical Engineering, University of Economics and Technology, TR 

Cumulative Selection of a Passive-Actuator

In this study a cumulative selection algorithm is applied to an actuator design optimization problem. The basic device designs are introduced to the optimization environment. With every generation, only the designs with less power consumption, less mass, less coil temperature, higher torque, and higher magnetic field are selected as the next generation. The modifications applied to candidate design are dimensions, wire types, and power input as voltage and ampere. 

The main advantage of using rollers is that their measured off-state torque is as low as 20 N.mm . Additionally the off-state torque of the rollers is independent of the radius of the device. 

105M019 \ Rotary Magneto-Rheological Damper Development for Force Feedback Haptic Interfaces 

“Experimental Investigation of a MRF Damper with Permanent Magnet for Haptic Finger Grasping”, 

Machine Vision & Mechatronics in Practice, eds. J. Billingsley & P. Brett, 105-112, Springer Berlin Heidelberg, 2015.

digital object identifier LINK,

“a Novel Rotary Magneto-Rheological Damper for Haptic Interfaces,”

The Scientific and Technological Research Council of Turkey – Travel Grant

“a Novel Rotary Magneto-Rheological Damper for Haptic Interfaces,”

ASME 2015 International Mechanical Engineering Congress & Exposition, Houston, US, 2015.

digital object identifier LINK,

“Design and Analysis of a Lightweight Disc-Type Magnetorheological Device”, 

The 2015 International Conference of Mechanical Engineering, London, GB, 2015.

Photo from Rock Off Festival - Megadeth

 Istanbul 2014

on Feasibility of a Parametric Modeling for a Haptic Interface

A self driving car capable of performing a double lane test and successfully avoiding hitting a livestock that's in the middle of the road. This research presents a haptic interface as a steering wheel, where the driver can share the control of the vehicle as well.

Married to Serpil Atamaz 

“Experimental Investigation of a Magnetorheological Fluid Damper with Permanent Magnet for Haptic Finger Grasping”, 

The 20th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), Ankara, TR, 2013.

a Cell-Based Additive Manufacturing Virtual Prototyping System

This paper describes a VP (Virtual Prototyping) system which provides a cost free environment for the optimization of the AM (Additive Manufacturing) system. This VP facilitates the product development by uniting the AM process and virtual reality in order to produce virtual and digital prototypes. Moreover, this VP system combines particle based and layer based processes by including powder particles as its input material. These particles are used as material codes in the VP system. This coding enables adding individual cells at desired locations in the solid body and enables obtaining basic building blocks in homogeneous state or in heterogeneous state by mixing with other powder particles. These blocks or cells are collated side by side to obtain the heterogeneous material property all over the solid body. The thin layers obtained by these cells are then subsequently stacked up to fabricate a virtual prototype. Manufacture of multi-material artifacts with smart cells is also possible due to selective-additive nature of this AM process. 

01049.STZ.2011-2 \ Development and Production of a Control Loading System for Rotor Craft Simulators 

"a Cell Based Approach to Modeling Discrete Multi-Material Objects", 

The 15th International Conference on Machine Design and Production (UMTIK), Denizli, TR, 2012.

“CFD-DP Modeling of Multiphase Flow in Dense Medium Cyclone”,

CFD Letters, Volume 4, No. 1, 33-42,

“a Virtual Prototyping System for Additive Manufacturing Process Development”,

Advanced Materials Research (AMR), Volume 445, 971-975,

digital object identifier LINK,

“a Virtual Prototyping System for Additive Manufacturing Process Development”, 

The 14th International Conference on Advances in Materials and Processing Technologies (AMPT), Istanbul, TR, 2011.

“Web-Based Simulation of a Lathe using Java 3D API”, 

The 2nd International Symposium on Computing in Science and Engineering (ISCSE), Izmir, TR, 2011.

“a Method for Slicing CAD Models in Binary STL Format”, 

The 6th International Advanced Technologies Symposium (IATS), Elazığ, TR, 2011.

“Effect of the Martensite Volume Fraction on the Machining of a Dual-Phase Steel using a Milling Operation”,

Materiali in tehnologije / Materials and technology, Volume 45, No. 2, 145-150,

The Scientific and Technological Research Council of Turkey - Publication Incentive

"on The Hardenability of an Intercritically Heat Treated Microalloyed Steel".

“on the Hardenability of an Intercritically Heat Treated Microalloyed Steel”,

Instrumentation Science & Technology, Volume 38, No. 2, 178–186,

digital object identifier LINK,

University of Economics and Technology - Full Scholarship

Department of Mechanical Engineering, Institute of Natural and Applied Sciences,

“Investigation on the Machinability of a Dual Phase Steel in Milling”,

Department of Mechanical Engineering, University of Economics and Technology, TR

The Scientific and Technological Research Council of Turkey - Publication Incentive

"on the Microstructural and Mechanical Characterizations of a Low Carbon and Micro-Alloyed Steel".

“on the Microstructural and Mechanical Characterizations of a Low Carbon and Micro-Alloyed Steel”,

Materials & Design (Mater Design), Volume 30, No. 8, 3274-3278,

digital object identifier LINK,

“Effect of Intercritical Heat Treatment on Mechanical Properties of a Microalloyed Steel”, 

The 5th International Materials Symposium (MATERIAIS), Lisbon, PT, 2009.

106M211 \ Investigation of Metal Armor Materials' Ballistic Performance  

University of Economics and Technology - Full Scholarship

Department of Mechanical Engineering, Institute of Natural and Applied Sciences, 

Third Lieutenant, Turkish Armed Forces, Cyprus  

“Machining Simulation / Lathe”,

Department of Mechanical Engineering, Kirikkale University, TR 

Assistant Engineer, Rona Makina Sanayii ve Ticaret A.Ş., TR  

Ankara Ataturk High School, Ankara, TR  

Cankaya Ataturk Anadolu High School, Ankara, TR  

Faik Erbag Elementary School, Ankara, TR  

Tabduk Emre Elementary School, Ankara, TR