Shop Rate: $100 per Hour (For all Custom Gunsmithing and services not listed)
Minimum Charge Per Firearm: $50 (No exceptions)
(Prone to Change Depending on Current Work Load)
Professional Cleaning Services: 5-10 Business Days
Warranty Returns: 4-10 Weeks
Sight Installation: 2-5 Business Days
General Repairs: 4-6 Weeks (Parts Dependant)
We reserve the right to refuse any job at any time for any reason
We reserve the right to refuse any work we decide would render a firearm unsafe
All Class lll Firearms ABSOLUTELY MUST have a copy of the proper paperwork included with it
We DO NOT work on or clean any AIR Pistols or Rifles, Paintball Guns, or any replicas
If there is a need for specialized work, we reserve the right to ship the firearm to another manufacturer for work (This may incur additional shipping and handling charges)
If warranty work is required, we reserve the right to ship to the manufacturer (Which may incur additional shipping & handling charges)
If there is a need for test firing, we ALWAYS use factory-loaded ammo. We DO NOT use handloads or Mil-Surp ammo
WE DO NOT REMOVE OR DEACTIVATE SAFETIES FOR ANYONE, EVER
(Starting At) (Part/Finishing/Ammo Not included)
MINIMUM Machine work fee $50
Assemble your AR Upper (parts not included in cost) $50
Assemble your AR Lower (parts not included in cost) $70
Safety Inspection/Function check (no test fire) $40
Safety Inspection/Function check Class III $70
or .50Cal (no test fire)
Safety Inspection/Function check w/Test Fire $50
(Class III & .50 cal’s excluded)
Professional Cleaning: Strip, clean, inspect, oil, reassemble $50
Professional Cleaning: Rusted HEAVILY SHOP RATE
(Minimum $150 Cost)
Professional Cleaning: Class III, .50Cals, ARs with $100
Multiple Accessories, rusted guns, dbl-barrel’s
Test Fire- Function, No sight in $40
Test Fire- Function, Machine Gun $60
Test Fire- Function & 25 yd Sight in $50
Non-Firing BORE Sighting (Collimator ONLY) $40
Remove Stuck Bullet or Case $40
Broken Screw Removal/per $40
Re-Assemble Gun from Parts (If Complete) $75
Minimum/Starting At:
Warranty Return to Manufacturer (Not including S&H) $50
Full AK Build (YOUR PARTS, Includes $400
Disassem/Reassem, No Cerakote or finish included)
Full AK Cerakote Finish (Solid Color) $350
*Pro-rated to $200 if done at time of Build
Pistol Build- “Full Boat LRK” $5K-6K+
(Machine Work to bring Parts to our standads)
(Starting At) (Part/Finishing/Ammo Not included)
Glock-Smooth Trigger action only $60
(Does not change trigger pull weight)
Glock- Install new connector (Not including part cost) $40
Glock- Install connector w/ over-travel stop $50
(parts not included in cost)
Springfield XD- Smooth action only $75
(Does not change take up, release over-travel)
Springfield XD- Install Trigger kit, $75
duty or carry use (parts not included)
Springfield XD- Install Trigger kit, $125
Competition Only (parts not included)
S$W M&P- Install Trigger kit (parts not included) $75
Install Trigger kit(Glock, Springfield, $40
1911, S&W, parts not included)
1911, Sig Sauer, or Browning HP Action/Reliability Job $125
HK- Install Trigger Spring kit (parts not included) $75
HK- Install LEM Trigger (parts not included) $75
(Starting At) (Part/Finishing/Ammo Not included)
(ALL Prices reflect standard sight work, additional costs may be incurred for “problem sights”)
Install Factory Sights (Purchased Here) $50
Install Factory Sights (NOT Purchased Here) $50
Install STAKE ON Front Sight (Non- Tritium) $70
Additional Cost to mill out sight (IF NEEDED)
Machine Slide for Front Dovetail Fit $70
Machine Slide for NOVAK or Heinnie Rear $125
Machine Slide for BO-MAR Rear Sight $160
Install Pinned Revolver Front Sight $50
Install Revolver Adjustable Rear Sight Blade $50
Drill/Tap Sight Base Hole (Per Hole) $40
Pin/Weld Front Sight $150
(Starting At) (Part/Finishing/Ammo Not included)
Install Gunsmith Fit Beavertail Grip, Specify Ed Brown or $125
Wilson Type, safety & frame fitting req’d (refinish incld)_
Install Drop-In Beavertail Grip Safety $50
Install Standard 1911 Thumb Safety $50
Install 1911 Ambi-Thumb Safety $70
(No modifications required)
Install 1911 Ambi-Thumb Safety $90
(If modification is required)
Install Browning Extended Ambi-Thumb Safety $65
(Starting At) (Part/Finishing/Ammo Not included)
Install 1911 Style Match Trigger $50
(Action Job Not Included)
(Remove Hammer Spur, Semi-Autos)
Install Match Sear (Action Job Not Included) $50
Install Hammer (Drop-In, Action Job Not Included) $50
BARRELS, BUSHINGS, GUIDE RODS
(Starting At) (Part/Finishing Not included)
Thread Barrel for Suppressor * $150+
(Surcharge for Metric, L. Hand, & Non-Standard TPI)
(*Thread Protector Not Included with Barrel Threading)
Ruger .22 BBL Package $200+
(Cut/Thread, Relocate Front Sight, Bull BBL Only)
Cut Barrel, Face, Cut Crown (Sight Install Not Included) $100
Throat Barrel & Polish Feed Ramp $75
Install & Chamber Match Grade BBL $150
Install & Chamber Match Grade BBL $100
(1911 Bull BBL, Glock, Browning)
Install Drop-In Barrel $50
(some fit req’d, bushing fit not included)
Install Solid Match Barrel Bushing $75
(Starting At) (Part/Finishing Cost Extra)
Add Front Serrations (Match Rear Serrations) $150
Lower/Flair Ejection Port (Re-Finish Not Included) $70
Tune Extractor (Re-Finish Not Included) $40+
Polish Breech Face (Re-Finish Not Included) $40
Fit New Slide to Frame (Barrel Fitting Not Included) $80
(Starting At) (Part/Finishing Cost Extra)
Install/Blend Smith-Alexander 1911 Mag Well $100
Install Slide Stop (with added detent) $50
Stake Grip Bushings (Per Hole) $30
Drill/Tap Frame For Grip Bushings $40
(Per Hole)(Plus Set-Up Fee)
Install Grip Bushings $30
(Standard, Slim, Oversize, EACH)
Install Mainspring Housing (If Fitting Req’d) $50
(Starting At) (Part/Finishing Cost Extra)
Action Job (Smooth action, tune internal parts, $150
Single or Double Action, Spring Kit Included )
Polish Chambers (For Improved Extraction) $50
Bob Hammer & Polish (D/A Only Conversion) $100
Round, Radius, & Polish Trigger Face $80
Correct Timing (S&W Only) $130
Remove End Shake (Cylinder Play) $90
Replace S&W Rear Sight Blade (Part Not Included) $40
Set Barrel Back 1 Turn, Adjust $200
BBL/Cylinder Gap, Re-Cut Forcing Cone
Re-Time Colt D/As(Starting At) $200
(Starting At) (Part/Finishing Cost Extra)
Cut and Crown Barrel(Must submit Form-4 beforehand, $100
if its an SBR conversion)
Thread Barrel for Suppressor
(Surcharge for Metric, L. Hand, and Non-Standard TPI’s) $150
Thread AK Barrel, Move Front Sight, $300
Thread/Pin Brake (See Above)
Thread Barrel for Muzzle Brake $150
or Suppressor(Standard TPI)
Thread Barrel for Muzzle Brake or Suppressor $250
w/ Custom “Invisible” Thread Protector
Fit New Barrel To AR15 (Including Removal $100
/Refit of HGs and Gas Block)
Fit New Gas Block to AR15 (w/ Taper Pin Mounts) $100
Permanently Affix Flash Hider (Drill & Pin) $100
Remove Permanently Affix Flash Hider (Drill & Pin) $100
Remove/ReInstall Flash Hider or Muzzle Brake $40
Cut, Crown, Thread, and Pin Muzzle $250
Device at 16 Inch Overall Length
(Starting At) (Part/Finishing Cost Extra)
Install SAKO or M16 Extractor in Remington 700 Bolt $200
Install Tac Bolt Knob(Rem700 or Win70, $140
Re-Build AR15 Bolt(Gas Rings and Firing $50
Pin Retainer Not Included)
Fit AR15 Gas Key, Seal Stake Screws $50
(Starting At) (Part/Finishing Cost Extra)
Install Tri-Lug or Other Suppressor Adapter $200
Install Paddle Mag Catch (Parts/Re-Finish Not Included) $200
(Starting At) (Part/Finishing Cost Extra)
Trigger Job/Action Job, most rifles $140
Trigger Tuning Job, FNAR rifle $140
Install & Adjust Aftermarket Trigger (Trigger not included) $60
(Starting At) (Part/Finishing Cost Extra)
Complete Bed With Aluminum Pillars, Free-Float Barrel $275
Channel (Most Fiberglass Stocks)
Complete Bed W/O Aluminum Pillars, $240
Free-Float Barrel Channel (Most Fiberglass Stocks)
(Synthetic Stock ad Recoil Pad Not Included)
(Synthetic Stock ad Recoil Pad Not Included)
Install Sling Swivel Stud (EACH, Parts Not Included) $30
Install AR Stock or Handguard $30
Install AR Handguard (If Gas Block Has To be Removed) $60
Install AR Sling Plate $40
Free Float HG Install (Starting At) $100
(Starting At) (Part/Finishing Cost Extra)
Drill & Tap Rec for Sight Bases- 6-48 or 8-40 (4 Holes) $40/hole
Drill & Tap Hole (Hardened or Plate Steel, Extra Charge) $40/hole
Mount and Bore Sight Scope, Laser Boresighted $40
(More if base needs machining)
Bore Sight Customer Mounted Optics (Collimator Only) $40
Install Picatinney Scope Rail $35-$150
(No Drill/Tap Req’d, If Machining is req’d, costs extra)
Fit Taper Pins for AR15 A-Frame F.S. on New Barrel $150
(Starting At) (Part/Finishing Cost Extra)
Cut and Crown Barrel $100
(Must have Form-4 if SBS/Class-3 conversion)
ReCrown & Thread Barrel For Pumpgun $180
for Rem Choke (Only, 12G Only)
(BBL Thickness Dependant)
(Starting At) (Part/Finishing Cost Extra)
Install Tac Front Sight, Silver Solder, Plain BBL $130
Install Tritium Tac Front Night SIght, Epoxy/Pin Plain BBL $80
Install Ghost Ring Rear Sight, $80
includes Drill/Tap in Rec. (2 Holes)
Drill & Tap Rec for Sight Bases- 6-48 or 8-40 (4 Holes) $120
Drill & Tap Hole (Hardened or Plate Steel, Extra Charge) $40/hole
Install Picatinney Scope Rail $40
(**No Drill/Tap Req’d, If Machining is req’d, costs extra)
Install Sight Head, BBL Drill/Tap Included, Part Not Included $50
Install Sight Head in Existing Hole (Part Not Included) $50
(Starting At) (Part/Finishing Cost Extra)
Smooth Action, Rem & Mossberg Only $90-$150
Trigger Tuning (Smooth Only) $80
Install Rem 870 Large Safety Button $40
Convert Safety to Left-Hand Button $80
Install Rem 870 Ejector (Part Not Included) $100
(Starting At) (Part/Finishing Cost Extra)
Install Pachmayr Decelerator Pad $75-$150
(Synthetic Or Wood, Pad Not Included)
Shorten Length Of Pull, Cut Stock $100
(New Recoil pad may be req’d, NOT included)
Install Replacement Pump Gun Forend $40
(No S/S, fitting extra $)
(New Forend may be req’d, fitting extra $)
Saiga Shotgun Stock/Trigger Guard Conversion $280
1- Color Complete $200.00
2- Color Complete $250.00
3- Color / Beginning Camo Price $350.00
Stencil / Custom Job Quote (Starting at) $350.00
Disassembly / Reassembly Fee $60.00* (*Charges May Apply)
Sig Sauer / Small Autos / Revolvers ADD + $40.00
Non-Stocked Colors Surcharge $40.00
1- Color Complete $250.00
2- Color Complete $275.00
3- Color Camo Price $350.00
Stencil / Custom Job Quote (Starting at) $400.00
Disassembly / Reassembly Fee $60.00* (*Charges May Apply)
Non-Stocked Colors Surcharge $40.00
1- Color Barreled Action $200.00
2- Color Camo Price $275.00
Stencil / Custom Job Quote (Starting at) $400.00
Disassembly / Reassembly Fee $50.00* (*Charges May Apply)
Non-Stocked Colors Surcharge $40.00
1- Color Barreled Action $100.00
2- Color Complete $150.00
2- Color Camo Price $275.00
Stencil / Camo / Custom Job Quote (Starting at) $300.00
Disassembly / Reassembly Fee $60.00* (*Charges May Apply)
Non-Stocked Colors Surcharge $40.00
COMPLETE BOLT ACTION RIFLES SUBTITLE
1- Color Complete $300.00
2- Color Complete $350.00
2- Color Camo Price $400.00
Stencil / Camo / Custom Job Quote (Starting at) $500.00
Just BBL Action, Bolt, Handle, and Shround $200.00
Disassembly / Reassembly Fee $50.00* (*Charges May Apply)
Non-Stocked Colors Surcharge $40.00
AK Complete Rifle- 1 Color: $350.00
1- Color Complete $275.00
2- Color Complete $350.00
3- Color /Beginning Camo Price $375.00
Stencil / Custom Job Quote (Starting at) $500.00
Disassembly / Reassembly Fee $75.00* (*Charges May Apply)
Non-Stocked Colors Surcharge $40.00
Stripped AR Receiver Set $100.00
Individual Receivers $60.00
Quad Rail, Keymod Rail, Front HG Rail $85.00
AR Rear Stocks (Starting At) $60.00
Suppressors (NFA Paperwork Required) $150
Non-Stocked Colors Surcharge $40.00
Ala’ Carte Items (Depending on Size, Composition, etc.) $80.00*
*Possible “Basket Rates” Available on Ala’ Carte Items
Disassembly / Reassembly Charges May Apply
Scopes (CK’d w/ complete CK rifle job) $200.00
Trijicon ACOG Sight $250.00
EOTech Hood, Flashlight $50.00
Rifle Mags (Minimum of 4) $20.00
Pistol Mags (Minimum of 5) $20.00
Misc Parts, Magpul AFGs, Grips, (Minimum 2) $25.00
Non-Stocked Colors Surcharge $40.00
Disassembly / Reassembly Charges May Apply