Roof Waterproofing Services

Whether it’s your home or office the water leakage from the ceilings and walls is very concerning. It washes off the paint from the walls, destroys the furniture, and in the long run, it might cause serious house structural damage.

As soon as you spot the roof leakage, you should try to mend it. If it’s too much and uncontrollable then try calling a waterproofing company professionals.

If you need bitumen sheet waterproofing or low-priced roof leakage repair service in Lahore, Islamabad, Karachi, or other cities of Pakistan, we are available 24/7 to serve you with the best.

Bitumen or asphalt is dark, thick liquid, and widely used in construction because of its exceptional waterproofing properties. With other new waterproofing technologies, we also use the bitumen sheet for roof leakage repair. It’s the most durable, economical, and efficient waterproofing method.

To get benefited from our special low price quality bitumen membranes contact us anytime.

Introduction of Roof leakage problems:

Cause of roof leakage:

There could be many hidden causes of roof leakage. You are most likely to have water leakage in the house if you spot any dark patches or water bubbles/drops on your painted wall or ceilings. Water usually travels from its leakage spot, so to identify its cause is important to track the water drops back to their actual spot.

Water leakage is inevitable, it could happen to any old or new house with an advanced waterproofing roof system. But there are some common causes of roof leakage, you should consider before waterproofing your house or office.

Old roofs:

Roofs undergo extreme hot and cold conditions. Over the years they slowly start losing their integrity. They start deteriorating and water starts leaking. So if you have a very old and rusty roof, it may be the cause of water leakage.

Cracked walls:

The cracks on house walls are a defiant, significant cause of water leakage. Water from environmental moisture and rain passes through these cracks and starts appearing on the inside of the walls and house.

Sometimes these cracks are so small that they are hardly observed by the naked eye. That’s why it’s important to thoroughly observe the leaking spots and try to fix them.

Poor construction:

Roof leakage depends a lot on roof construction material quality and how well it is installed. Low-grade material usage and poor workmanship are the main causes of the faulty home structure.

So it’s better to install quality material and hire a professional roof contractor for construction rather than paying for repairing every month.

Broken pipes:

Accumulation of debris, plastic, or any other material can cause blockage of water pipes that run on the roof and inside home walls. Accumulated water exerts pressure on the pipe due to the obstruction on his way.

It causes water pipe to crack and if pressure is persistent and high, it could result in complete pipe wreckage. The water from the roof dissipates into the house, likewise, water from the wall seeps into the building, resulting in water leakage.

To avoid this, check the drainage system once in a while and flush properly.

Bitumen membrane Waterproofing Pakistan:

Bitumen membrane sheet is one the most efficient way of waterproofing. It’s used all over the world for this purpose. Bitumen is also known as asphalt and it is a highly thick and viscous substance. It has extraordinary qualities of waterproofing. It’s widely used to make waterproof roofs, walls, basements. Grounds and below ground structures.

Bitumen constitutes different elements and complex hydrocarbons. It’s available in organic natural form but can be produced artificially by distillation of crude oil. We deal and supply low price bitumen membrane sheets in Lahore Islamabad and all over Pakistan.

Bitumen membrane sheet at low price in Pakistan:

Our company “ “has years of experience and expertise in bituminous membrane waterproofing. We deal with the finest quality bitumen membrane sheets at a low price in Pakistan. Bitumen waterproofing is used to protect the residential and commercial buildings in Lahore, Islamabad, and all other cities of Pakistan.

You can get a low price and economical bitumen membrane sheets from our dealers.

Benefits of Bitumen membrane sheet as a waterproofing Coat:

Bitumen is excellent water-resistant paint because of its prominent hydrophobic properties.

Bituminous paints are applicable on steel, iron, and aluminum, and plastic. They provide great resistance against corrosion.

Bitumen sheets have natural UV resistance properties. Their durability and functionality increase to a great extent when they mix with other polymers. Because of their great versatility and durability, they are applicable in both indoor and outdoor harsh environments.

Bitumen has a very high melting point. It cannot be melted easily so during summer, its functionality and adhesiveness will not be compromised when exposes to UV light for a larger period.

It has thermoplastic and viscoelastic properties.

At low temperature, it has elastic solid properties but at high temperature, it acts as viscous material.

Bitumen roofs have high tensile strength. They can withstand heavy storms, hail, and rain. Their inbuilt material is also resistive against fire.

Bitumen membranes hold out against mold spores formation, as they protect the roof and building from moisture and dampness.

Bitumen is an economic and quality product. We deal with bitumen and waterproofing products and applications. You can get the bitumen sheet at a very low price In Pakistan from us.

Bitumen membrane sheets use is not limited to flat and residential roofs. They are compatible with all types of roofs. We can use them on residential and public roofs as a waterproofing membrane.

It’s a lifelong solution to waterproofing. Even after a year, they have not relinquished their ability of pliability and elasticity, and still offer good waterproofing support.

Bitumen sheets are very easy to apply. The process involves few simple steps.

To enhance the water-resisting properties of bitumen it is usually mixed with other solvents like mineral spirit and polymers. They thoroughly blend with bitumen and increases their hydrophobic properties. It’s a more specialized and advanced type of waterproofing and is used on roofs and exposed to environmental areas.

Bitumen membrane sheets are versatile and durable. They can stick or adhesive to a wide range of materials for a very long time. They make a strong bond with attaching material and are completely glued with it.

It’s another hydrophobic attribute is its non-water solubility. Bitumen cannot be mixed or dissolved in water. Bitumen could is exposed to water for a long time without affecting its durability and water-repelling properties.

These waterproofing characteristics distinguish bitumen from other waterproofing paints and make it an ideal and obvious choice for everyone.

We have available low-priced bitumen membrane sheets.

Hot Bitumen application method:

People are using bitumen for waterproofing purposes for a long time. In the past, people used bitumen for construction purposes as a waterproofing agent. They used to waterproof their ships and residential areas building with bitumen. In modern its use and demand increased.

The rapid urban development highlighted its importance as waterproofing paint. Due to its exceptional attributes, people tend to use bitumen more than other waterproofing paints.

With efficient application method, we also provide low priced economic products get benefited from our services, contact us anytime.

Steps in applying hot bitumen on the roof:

Everyone should go for the best waterproofing chemical to tackle the problem the water leakage, there are different chemicals available in the market for waterproofing purposes but bitumen is a beast among all.

Applying hot bitumen involves five simple steps. After the process bitumen will completely adhere to any type of material. This will help the building in protection against any kind of moisture, dampness, or water leakage.

For the bitumen’s optimum durability and ideal functionality, it’s necessary to follow these steps. So you don’t have to face any water leakage issue after the installation. We deal with quality and low-priced bitumen sheets and other waterproofing products. waterproof

Quality of Bitumen product:

It’s the first and important step in the application of bitumen. The quality of bitumen determines the durability and performance in controlling water leakage and seepage. Installation of low-quality bitumen will result in power performance and water leakage.

You can only avail the premium quality from a reputable waterproofing company.

We have years of experience in the field of water and heatproof. We deal with economic and premium quality bitumen. For placing your order you can contact us anytime.

With our quality product and expertise, you will have no longer worry about your water leakage problem. Our installation process is very smooth and quick. You will get premium and life lasting bitumen waterproofing with an efficient and accurate installation process. Our company Bitumen membranes are very low priced and durable

Solid bitumen melting:

To make the bitumen applicable, it’s first melted into a liquid. Like any other asphalt, Bitumen also works in liquid form. For this purpose, we have to heat the bitumen to the point, where it starts converting into liquid or semiliquid form.

To start the process we have to first place bitumen in a large barrel and set up a burning fuel, source of heat, beneath it. Bitumen will slowly start heating up and eventually converts into thick liquid form. As bitumen is a very compact substance, do for complete melting it may take some hours.

Once it stops melting, it would be a lot easier to put it onto the roofs, floors, decks, basement, grounds, or any other area where water leakage is happening.

Pouring of Hot bitumen:

Here starts the real waterproofing process. After the bitumen conversion of solid to liquid form, now it’s ready to be poured on the ground or roof.

As we already know that bitumen is in a hot boiling state, so one should take all the precautionary measures, before handling the hot bitumen barrel.

Workers must wear safety shoes, gloves, and masks before pouring the hot bitumen from the barrels. These protective measures will ensure the workers are safe during the risky process of bitumen application.

It is also recommended to hire professional and experienced workers to do this delicate task. They will proceed with the bitumen waterproofing process professionally and accurately, and you will get the expected results.

Pour the hot bitumen into the middle of the roof or floor. Because bitumen is in hot liquid form and it will slowly swim towards the sides. Complete the application process as soon as possible, before bitumen cools down.

Bitumen spreading:

After pouring bitumen from the barrel, spread it over all the nearby spaces that you want to make waterproof. For this purpose of bitumen spreading, one should use a special iron spreader rather than some plastic brush.

Outspread the hot bitumen with the help of an iron spreader must be carried out delicately and accurately to all over the desired spaces. This process of bitumen spreading should be done step by step in such a way that bitumen completely clings with the floor surface. This will ensure the durability and accurate functionality of bitumen membrane sheets in the future.

Cooling of Bitumen:

The next step in this process is the cooling of bitumen. After the application of bitumen, left the area so that bitumen cools off completely.

Only the workers wearing special gear were used to deal with hot bitumen. The rest should avoid walking over hot bitumen.

The cooling-off time of bitumen depends on weather and sunlight access. On a sunny day in summer, it il take only a few minutes to cool off and in winter it will take relatively more time to become completely stiff and function-able.

Before proceeding to the next step make sure it’s properly cool and compact enough to stop the water leakage and seepage.

Test the bitumen stiffness:

To check that bitumen’s stiffness and rigidness, spray the water all over the bitumen. If all the waterproofing steps are executed accurately then you will see no water leakage.

If you have used a low-quality bitumen or haven’t executed the bitumen waterproofing steps in the right way, then you will see water leakage, which may not be right after installation, but defiantly after some time.

If you are looking for an efficient bitumen waterproofing method treatment, then we might be the ideal choice for you. Because we are serving this industry for many years and we deal with quality bitumen membrane sheet products at low prices. We also have experienced field workers that will ensure it’s accurate and step by step application.

Bituminous waterproofing coating