Computer System Service

TVL - ICT - 11 Molave

How to Disassemble and Assemble a System Unit.

Procedure step by step on how to Disassemble and Assemble a System Unit

•Step 1 : Hold onto a any metal to remove the ESD on your body. Otherwise you would get an electric shock or some parts of the computer may get Destroyed.

Step 2 : Make sure the the System Unit is off or you would get electricfied.

Step 3 : Open the Case of the System Unit so you can see the other parts.

Step 4 : Remove the Front Panel.

Step 5 : Remove each wire that is connected from the Power supply and HDD.

Step 6 : Remove the Power Supply, remove it gently and with care. Just like her.

Step 7 : Remove the HDD or the Hard Drive Disc.

Step 8 : Remove the CMOS battery.

Step 9 : Remove each of the RAM carefully!! because it is very fragile. One wrong move and it's over.

Now that we Disassemble our System Unit. Let us now Assemble it.

Incase you forgot where to put it back, take a picture of it before Disassembling it.

Step 1 : Place the RAM and press it not too hard or gently, just right. Until you hear a click sound.

Step 2 : Put the CMOS battery just put it and press it.

Step 3 : Put the HDD or the Hard Drive Disc.

Step 4 : Put the wirings of the HDD to where it's supposed to be connected.

Step 5 : Put the Power Supply.

Step 6 : Put the wrings of the Power Supply to where it's connected to.

Step 7 : Put the Front Panel.

Step 8 : Put the Case back.

NOW YOU HAVE IT. YOU HAVE LEARN ON HOW TO DISASSEMBLE AND ASSEMBLE A SYSTEM UNIT! NOW TRY IT YOURSELF!!

(I didn't Disassemble some part of the computer because it's already screw in.)

Page updated

Google Sites

Report abuse