International Conference

International Conference

1

I. S. Cho, W. M. Jeong, K. B. Shin

Computational and Experimental Approach for PDP Natural Cooling Monitor Design

IMID '01 Conference / August 29-31, 2001. / Daegu, Korea

2

K.B. Shin, S. H. Hahn, S.H. Yoon, C.G. Kim, C.S. Hong

Life Prediction of Graphite/Epoxy Composites Under Short-Term Exposure Test

SAMPE 2003 conference / May 13, 2003. / Long Beach, California, USA

3

I.S. Cho, S.Y Lee, K.B. Shin

Measurement and Simulation for Temperature Difference on Front Panel Surface of 42 in. PDP Module

SID '03 Conference / May 20, 2003. / Baltimore, Maryland, USA

4

C. G. Kim, K. B. Shin, C. S. Hong

Degradation and Life Prediction of Composites under Space Environment

The Int'l Workshop on the Mechanicals Behaviors of Fiber Reinforced Composites under High and Low Temperature and Other Various Environments / January 9-12, 2002. / Kyushu University, Japan

5

I. S. Cho, K. B. Shin

Hot Impinging Jet Approach for Drying Dielectric Layer of PDP 42inch

SID '02 Conference / May 19-24, 2002. / Boston MA, USA

6

C. S. Kim, K. B. Shin, S. W. Booh, W. Y. Soh

The Simulation Based Drop/Impact Design of PDP Module

SID '02 Conference / May 19-24, 2002. / Boston MA, USA

7

K.B.Shin, K. Choe, S. Lee, S. Yoon

The manufacturing processes of hybrid railway carriage strcutures of Korean Tilting Train express with service speed of 180km/h

26th Sampe Europe International Conference / April 5-7, 2005. / Paris, France

8

S.H.Kim, S.G.Kang, C.G.Kim, K.B.Shin

Analysis of the composite structure of Tilting Train Express(TTX)

ICCM 15 / June 30, 2005. / Durban, South Africa

9

Shin, Kwang-Bok, Ryu, Bong-Jo, Lee, Jae-Youl, Lee, Sang-Jin, Jo, Se-Huen

Evaluation of the Structural Integrity of a Sandwich Composite Train Roof Structure

HPSM 2006 / May 3 - 5,  2006. / Ostend, Belgium

10

Hyun-Hee Han, Bong-Jo Ryu, Kwang-Bok Shin, Gyu-Seop Leec, Kil-Young Ahn, Young-Sik Yoon

Elastic Impact Analysis of a Cantilevered Beam with an Impactor

Asian Conference on Multibody Dynamics / August 4-6, 2006. / Tokyo, Japan

11

J.Y. Lee, K.B.Shin, B.J.Ryu, J.S.Jeon, S.J.Lee

Simulation of low velocity impact of sandwich panels applied to korean low floor bus using LS-DYNA

ICCM 16 / July 8-13,  2007. / Kyoto, Japan

12

H. Y. Ko, K. B. Shin, K. W. Jeon

A study on low-velocity impact response of honeycomb sandwich panels with change of impact location and core fabrication angle

ETDCM-9 / September 30 - October 2, 2009. / Vicenza, Italy

13

Y. G. Choi, K. B. Shin, W. H. Kim

A Study on Size Optimization Design for Rocket Motor Case with Torispherical Dome Type

AJCPP / March 4-6, 2010. / Miyazaki, Japan

14

H. Y. Ko, K. B. Shin, J. S. Kim

A Study on Improvement of Fatigue Life for Woven Glass Fabric/Epoxy Laminate Composite applied to Railway Vehicle

PRICM-7 / August 1-6, 2010. / Cairns, Australia

15

J. S. Kim, H. J. Yoon, K. B. Shin

Design of a Composite Side Beam for the Railway Bogie Frame

PRICM-7 / August 1-6, 2010. / Cairns, Australia

16

H. J. Yoon, K. Y. Song, J. S. Kim, K. B. Shin, S. C. Kim

Crack propagation monitoring of DCB composite specimens using distributed optical fiber sensor

PRICM-7 / August 1-6, 2010. / Cairns, Australia

17

H. J. Jang, K. B. Shin, H. Y. Ko, T. H. Ko

A Study on the Standardized Finite Element Models for Carbody Structures of Railway Vehicle made of Sandwich Composites

ACCM 7 / November 15-18, 2010. / Taipei, Taiwan

18

J. S. Kim, H. J. Yoon, K. B. Shin

Structural and Dynamic Performance Evaluation of a GFRP Composite Bogie Frame for Urban Subway Trains

32nd SAMPE / March 28-29, 2011. /  Paris, France

19

K.W.Jeon, K.B.Shin, J.S.Kim

A study on fatigue life and strength of a GFRP compositebogie frame for urban subway trains

ICM11 / June 7, 2011. / Como, Italy

20

Kwang-Woo Jeon, Kwang-Bok Shin, Tae Kyung Hwang

Optimum Design Criterion for adhesive length of joint part for composite pressure vessel with separated dome

AJCPP2012 / March 2,  2012. / Xian, China

21

Kwang-Woo Jeon, Kwang-Bok Shin,

Experimental and Numerical Simulation of Low-Velocity Impact Responses of Sandwich Panels for Impact Limiter of Spent Nuclear Fuel Shipping Casks

APMAS2012 / April 27, 2012. / Antalya, Turkey

22

Jun-Sung Goo, Kwang-Bok Shin, Jung-Suk Kim

Experimental and numerical studies on the effect of ballast-flying phenomena on glass epoxy composite materials applied to lightweight bogie frame for urban trains

ICEFA V / July 1, 2012. / Hague, Netherlands

23

Jun-Hwan Kim, Kwang-Bok Shin, Tae-Kyong Hwang

A Study on the Optimum Design of Skirt Shape for Composite Pressure Vessel

SAMPE Tech2012 / October 22, 2012. / Charleston, USA

24

Jun-Hwan Kim, Kwang-Bok Shin, Woo-Suk Choi

A Study on the Low-Velocity Impact Characteristics of Impact Limiter Materials for Nuclear Spent Fuel Transport Case

6th ICCTM / April 23, 2013. / Aalborg, Denmark

25

Jae-Moon Im, Kwang-Bok Shin, Dae-Bong Lee

A Study on the Utilization of Wind Power Turbine for a Flywheel Energy Storage System Using Subway Train Traveling Wind

CC2013 / September 5, 2013. / Sardinia, Italy

26

Seung-Gu Kang, Kwang-Bok Shin, Eun-Kyu Lee, Ill-Ro Yoon, Jong-Hwa Lee

A Study on Joints for Composite Material Application in High-Speed Maglev Train

3rd ICMM / September 10, 2013. / Warszawa, Poland

27

Jae-Moon Im, Kwang-Bok Shin, Tae-Kyung Hwang

Evaluation of mode I, II interlaminar fracture toughness for a filament wound carbon/epoxy composite under low and high temperature

ECCM16 / June 26, 2014. / Sevilla, Spain

28

Seung-Gu Kang, Kwang-Bok Shin, Eun-Kyu Lee, Ill-Ro Yoon, Jong-Hwa Lee

A Study on the Joint between a Sandwich Composite Roof and an Aluminum Extrusion Carbody for High-Speed Maglev Train

ECT2014 / September 2,  2014. / Napoli, Italy

29

Seung-Gu Kang, Kwang-Bok Shin, Jong-Yeon Kim, Won-Hee You, Tae-Hwan Ko

Basic design and structural intefrity evaluation of aluminum extrusion carbody for double deck high-speed train

JRC2015 / March 23-26, 2015. / San Jose, CA, USA

30

Seung-Gu Kang, Kwang-Bok Shin, TaeKyung Hwang

Progressive Fallure Analysis of Adhesive Joints of Composite Pressure Vessels Using CZM and VBA

ICCS18 / June 15-18,  2015. / Lisbon, Portugal

31

Jae-Moon Im, Kwang-Bok Shin, Tae-Kyung Hwang

The Effect of Temperature on Mechanical Properties of Carbon/Epoxy Composites

ICCS18 / June 15-18, 2015. / Lisbon, Portugal,

32

Seung-Gu Kang, Kwang-Bok Shin, TaeKyung Hwang

A Study on Progressive Failure Analysis for Adhesive Joints of Curved Composite Structure

SAMPE LONGBEACH 2016 / May 23-26, 2016. /  Longbeach, CA, USA

33

Jae-Moon Im, Kwang-Bok Shin, Sang-Woo Lee

The Equivalent Axisymmetric Finite Element Model for a Cylinder-Type Composite Lattice Structure

ACEX2016 / July 3-6, 2016. / Split, Croatia

34

Jae-Moon Im, Kwang-Bok Shin, Ik-Hyeon Choi

Evaluation of Mechanical Properties of Composite Material Under Space Thermal Environments

ACCM10 / October 16-19, 2016. /  Busan, Korea

35

Jae-Yeul Lee, Kwang-Woo Jeon, Hyun-Joon Chung, Sung-Ho Hong, Goo-Bong Chung, Kwang-Bok Shin

Evaluation of the Structural Integrity of Lightweight Welding Robot Arm Including Composite Materials

ACCM10 / October 16-19, 2016. / Busan, Korea

36

Seung-Gu Kang, Kwang-Bok Shin

Progrssive Failure Analysis of Curved Composite Laminates Using CZM

ICANM2017 / August 7-9,  2017. / Tronto, Canada

37

Seung-Gu Kang,Jae-Moon Im, Kwang-Bok Shin

Prediction of Progrssive Failure for Curved Composite Laminates under Mode | and Mode || Loading

ICMAE2018 / July 10-13, 2018. / Budapest, Hungary

38

Min-Ho Jung, Sang-Hyup Lee, Kwang-Bok Shin

Development of Automated Generating Program of Finite Element Model for Cone-type Lattice Structure

ISEAS2018 / August 7-9, 2018. / Guam, USA

39

Sang-Hyup Lee, Min-Ho Jung, Kwang-Bok Shin

Conceptual Design of Manufacturing Equipment for Microdroplet Specimen with Constant Resin Embedded Length

ISEAS2018 / August 7-9, 2018. / Guam, USA

40

Jae-Moon Im, Sang-Hyup Lee, Kwang-Bok Shin, Seoung-Ryoung Kim, Sang-Woo Lee

Evaluation of Mechanical Properties of Carbon Fiber Considering Size-Effect

31st Materials Science And Engineering Conference : Advancement & Innovations / August 15-17, 2018. / Helsinki, Finland

41

Jae-Moon Im, Kwang-Bok Shin, Sang-Woo Lee

Study on the Progressive Failure of Composite Lattice Structure Unit Cell Including Variation of Fiber Volume Fraction

ICCS21 / September 4-7, 2018. / Bologna, Italy

42

Sang Hyup Lee, J.M. lm, K.B. Shin, S.R. Kim, S.W. Lee, N.G. Yoon 

Evaluation of Structural Integrity for 500mm diamiter Composite Pressure Vessel Manufactured by Filament Winding Method

ACEX2019 / July 1-5, 2019. / Athens, Greece

43

Jae-youl Lee, Gi-su Yi, Sung-Youl Bae , Kwang-Bok Shin

Development of automated lay-up robot system for jointing process of GRP pipes of 1,800 mm to 3,700 mm diameter 

NAC2019 / August 10-11, 2019. / Taipei, Taiwan

44

Jae-Moon Im, Won-Jun Choi, Kwang-Bok Shin, Sang-Woo Lee

Evaluation of Structural Integrity of Composite Lattice Structure with Windows under Compressive Load

SAMPE Conference 19 Nantes / September 17-19 , 2019. / Nantes, France

45

Geun-Su Song, Yeong-Hwan Jeon, Jae-Youl Lee, Kwang-Bok Shin

Multibody Dynamics Analysis of Lightweight Manipulators for Automated Ropeway Structure Inspection

The 2nd Japan-China-Korea Joint Symposium on Composite Materials / October 6-8, 2023 / Kanazawa, Japan

45

Geun-Su Song, Yeong-Hwan Jeon, Jae-Youl Lee, Kwang-Bok Shin

Multibody Dynamics Analysis of Lightweight Manipulators for Automated Ropeway Structure Inspection

The 2nd Japan-China-Korea Joint Symposium on Composite Materials / October 6-8, 2023 / Kanazawa, Japan

46

GwanHee Han, DaeHan Cheon, JungSeok Kim, ChangYoung Lee, KwangBok Shin

Evaluation of the Structural Integrity of Hyperloop Carbody made of a

Composite Lattice Structure

ICCSE 2023 / September 22, 2023. / Naples, Italy

46

GwanHee Han, DaeHan Cheon, JungSeok Kim, ChangYoung Lee, KwangBok Shin

Evaluation of the Structural Integrity of Hyperloop Carbody made of a Composite Lattice Structure

ICCSE 2023 / September 22, 2023. / Naples, Italy

47

Evaluation of Mechanical Properties for Carbon-Fiber Strand Specimen under Operating Environments 

ACCM 2024 / Oct. 27 / Kyoto, Japan

48

Comparison and Evaluation of Structural Integrity for Type-III Composite Pressure Vessel by Numerical Simulation and Hydrostatic Test

12th Annual Conference of Society of Structural Integrity and Life (DIVK12) / Nov. 17 /Belgrade, Serbia

49 

COMPARISONS OF BURST PRESSURE OF TYPE III COMPOSITE PRESSURE VESSELS MANUFACTURED BY WET AND DRY FILAMENT WINDING METHODS

CompTest 2025 / May. 21 / Latvia

50

Structural Integrity Evaluation and Basic Design Composite Bogie Frame for Hypertube Train 

Mechcomp / July.21 / Porto

51

structural of Composite Manipulator Applied to the Automated Ropeway Inspaction Using Flexible Multibody Dynamics Analysis

ICCM / Aug. 01 / Baltimore