locGet
Welcome !
LocGet is a versatile logging tool that simultaneously captures iPhone location information, sensor readings, and video footage. It serves as a perfect memory recording tool for a range of applications including research and development, education, outdoor activities such as mountain climbing, driving, cycling, and travel.
![](https://www.google.com/images/icons/product/drive-32.png)
UPDATE NOTICE (2022/4/6 version 1.41)
----------------------------------------
Release date: 2022/4/6
Version: 1.41
We added one function, 2 updates and 2 corrections.
[Function addition]
· Added lock button to top screen. During locking, the recording ON / OFF operation is disabled.
You can use the Add Flag 'button even while locking.
Locks can be released by sliding the slider appearing in the center of the screen.
While locking, automatic locking of the screen by iOS is disabled. In order to perform video shooting, it is no longer necessary to set the time to automatic lock.
[update]
· We have renewed help file.
· Added correspondence time format to address data.csv with Excel and responded when the format of the measurement time has changed. Please check the renewed help for more information.
[Correction]
· Fixed an issue where the application may crash when the data measured in the data confirmation screen is played back on the confirmation screen.
· On the data confirmation screen, the update period of the graph using the play button was changed the same as the measurement cycle. This makes it possible to play the data measured in high cycles more smoothly
----------------------------------------
Release date: 2022/4/2
Version: 1.40
The following six functions were added.
· Added the ability to take photos by pressing event button. (* Can not be used with video shooting.)
If you shoot a photo, a photo is displayed in the trajectory area of the data confirmation screen.
The size of the photo can be changed by tap. You can change the position of the photo with drag.
If you take multiple photos, the same size is applied to the photos displayed after that.
The display time of the photo can be changed from the setting.
· In the measurement item, the progress direction (True Heading, Magnetic Heading) has been added.
· It is possible to display the simple compass (two types of 0 degrees or magnet north).
· In each item of the setting screen, the ""display 'label or' Record 'tapping the label, adding the display or recording to ON or OFF.
· Added the ability to select categories such as the location name displayed on AppleMap. You can select from 40 types.
· We have improved pinch operation etc. to confirming the trajectory with the play button with AppleMap
----------------------------------------
Release date: 2022/3/25
Version: 1.30
The following two corrections have been made.
-Fixed a bug that acceleration, gravity, and posture were not updated when neither display nor recording of acceleration was performed.
-Fixed a bug that the location information and speed display settings (display / not display) and recording settings (record / not record) are not reflected correctly.
Note that this fix also reduces battery consumption, albeit slightly.
The following 4 functions have been added.
-Added the function to record the volume.
Think of it as a reference value for knowing the loudness of the surrounding sounds.
When displaying or recording the volume, the sound effects (recording start, recording end, flag addition) are automatically turned off.
-Added the function to record magnetism.
-Added the function to create and select the setting list.
You can save the current settings from the button "Save this setting" at the top left of the settings screen (gear icon on the top screen).
Saved settings can be recalled from the new icon (to the right of the gear on the top screen).
-You can now check the data with the play button even if you have not shot the video.
----------------------------------------
Release date: 2022/3/20
Version: 1.22
Added functions and fixed bugs.
The following two bugs have been fixed.
Fixed a bug that the app may crash when browsing the graph area without recording the location information.
Fixed a bug that the app may crash when browsing the graph area without recording the sensor value. With this fix, you will be able to view records that could not be viewed due to 0 location or sensor values.
The following 4 points have been updated.
Added the function to display the trajectory map on AppleMap.
It is possible to display in synchronization with videos and graphs in the same way as the previous trajectory map.
In the graph area, about acceleration (ax, ay, az), gravity (gx, gy, gz), angular velocity (rx, ry, rz), attitude (roll, pitch yaw)
Added the function to display 3 axes at the same time. You can still check each axis one by one.
+ On the record selection screen, an overview of each record (recording start date and time, recording time, file capacity, beginning of memo) Was displayed.
+ Changed to stop the capture session on screens other than the top screen that do not require recording preparation status (data confirmation screen, help, settings, etc.). This has slightly improved battery efficiency. Also, when video recording is set, a green circle mark always appears at the top of the screen, but it does not appear except on the top screen.
+ Updated help.
----------------------------------------
Release date: 2022/3/11
Version: 1.1
The following functions have been added. The data collected so far will continue to be available.
+ Added video playback function.
You used to play the video with the seek bar, but now you can play it like a normal video by pressing the play button.
You can change the playback position with the seek bar as before.
Graphs and maps change according to the playback position of the video.
While playing a video, you can change the playback position and display items with the seek bar.
+ You can now swap the video display area and the trajectory display area (latitude and longitude).
+ A function has been added to the trajectory display area.
The direction symbol is now displayed.
A marker (yellow x mark) can now be displayed at the position where the measurement flag is added.
You can now plot points so that you can see the data delimiters of the trajectory.
These additional features can be optionally turned off.
+ A function has been added to the video display area.
You can enlarge the video by double-tapping the video display area.
You can change the position by dragging the video display area.
Future update
The upcoming updates are as follows:
* This is in the examination stage, and we do not guarantee the addition of functions.
* We will prioritize and implement items with many requests.
* In addition, if there is a suggestion of a useful function, we will add it one by one.
Multiple FLAG buttons
Compatible with iPad (no need to purchase separately)
Viewpoint operation of Flyover (Apple Map)
Fixed the problem that the position of the trajectory map shifts during Flyover
iCloud support
You can check the locus map with a simple line drawing or on the Apple map.
Acquires the following values at the specified frequency and records them in a CSV file.
However, the location information and speed will be updated once per second depending on the specifications.
Location information (world geodetic system)
Speed (by GPS)
Acceleration (3 axes)
Gravity (3 axes)
Angular velocity (gyro) (3 axes)
Attitude (yaw, pitch, roll)
Pressure
Altitude (difference from the measurement start point)
Magnetic
Volume picked up by the microphone (think about the reference value)
Direction of travel (true heading, magnetich heading)
If you shot a video, you can check it in sync with these values in the app.