If you want a more elaborate multi-driver design for mobile gaming, choose Linsoul KZ AS16; if you need a simpler, bass-forward wired earphone, choose Linsoul KZ AS10. For most players using a 3.5 mm connection, I’d lean toward the AS16 for its eight balanced-armature drivers per side and stated passive noise reduction, while the AS10 makes a clearer case for a strong, prominent bass presentation.
Neither model is a wireless gaming headset, and neither is described as having a microphone. Treat them as wired in-ear earphones for listening, not as a complete headset setup for voice chat.
• Linsoul KZ AS16 strength: Eight balanced-armature drivers per side, arranged for low, mid, and high frequencies. Trade-off: It is still a wired, without-mic model, so it does not provide wireless freedom or built-in voice chat.
• Linsoul KZ AS10 strength: A five-driver-per-side layout described as bass-forward, with prominent mids and highs that are not overly sharp. Trade-off: It has fewer drivers per side than the AS16.
• Both models: Use a detachable 0.75 mm two-pin cable, a 3.5 mm jack, and passive noise control. Neither has a stated transparency mode.
• Choose the AS16 if you want a more complex driver arrangement and the stated passive noise reduction of more than 26 dB.
• Choose the AS10 if you prefer the product’s specifically described strong bass and want a less elaborate five-driver layout.
The AS16 Pro is the more ambitious design on paper. It uses eight balanced-armature drivers in each earpiece: one low-frequency unit, two for the midrange, and four for high frequencies, with an additional high-frequency driver listed in the configuration. Its three-way crossover and channel structure are intended to direct different parts of the sound range through the relevant drivers. The listed frequency range is 20 Hz to 40 kHz.
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-09 · 6 min read · Independent comparison
That setup makes the AS16 the more compelling choice if you want an in-ear monitor with a clearly divided low-, mid-, and high-frequency design. For mobile gaming, a wired 3.5 mm connection may suit a compatible device when you want to avoid relying on a wireless connection. The product also specifies passive noise reduction of more than 26 dB, which may help limit some surrounding sound; it is not active noise cancellation and does not create a transparency mode.
Skip the AS16 if you specifically want a microphone, wireless operation, or built-in gaming-chat features. It is listed without a mic, and its controls and cable do not turn it into a dedicated gaming headset. Its driver count also does not, by itself, prove that it will make game audio more accurate or help you locate sounds better; the sheet provides no gaming latency or positional-audio measurements.
The AS10 uses five balanced-armature drivers per side. Its described tuning emphasizes strong bass and a prominent midrange, while aiming to keep the high frequencies from sounding overly sharp. That makes it the more direct fit if you want a bass-led presentation for music or game audio rather than choosing mainly for the AS16’s higher driver count.
The AS10 is also wired, with a 3.5 mm jack and a detachable two-pin cable. Its listed frequency range is 20 Hz to 40 kHz. For someone choosing earphones for mobile gaming, that means it can be considered when the phone or gaming device has a compatible 3.5 mm connection—or when the user has an appropriate adapter. The product sheet does not specify adapter support, so check your device rather than assuming direct compatibility.
Skip the AS10 if your deciding factor is the AS16’s eight-driver-per-side arrangement or the AS16’s stated passive-noise-reduction figure. The AS10 is likewise listed without a microphone, and its noise control is passive. It is not a wireless headset, nor does its description claim a transparency mode. Its appeal is more about the stated sound balance and simpler driver configuration than gaming-specific functions.
Side-by-Side: Which Should You Choose?
• Best fit for a more elaborate multi-driver layout → Linsoul KZ AS16. It has eight balanced-armature drivers per side, compared with five in the AS10.
• Best fit for a bass-forward sound description → Linsoul KZ AS10. Its specification highlights strong bass and a prominent midrange.
• Best fit if you want four high-frequency drivers per side → Linsoul KZ AS16. Its listed driver arrangement assigns four units to high frequencies.
• Best fit if you want a five-driver-per-side design → Linsoul KZ AS10. That is its defining configuration, with two drivers assigned to mids and two to highs alongside its bass driver.
• Best for a wired connection to a compatible 3.5 mm port → Either. Both are wired and list a 3.5 mm jack; confirm your device has the right connection.
• Best for built-in voice chat or wireless play → Neither. Both are listed without a microphone and use wired connectivity.
• Best if you’re searching for transparency mode earphones for mobile gaming → Neither. Both list passive noise control, not a transparency mode.
These are gaming headphones for mobile gaming only in the broad sense of personal listening gear, not full gaming headsets. A player who needs voice chat should plan for a separate microphone or choose a product that explicitly includes one. Likewise, the provided specifications do not state latency, surround processing, or game-specific sound positioning, so I would not choose between these two on claims about competitive advantage.
I would choose the Linsoul KZ AS16 for mobile gaming if I wanted the more complex driver layout and its stated passive noise reduction, provided my device supports its 3.5 mm connection. That is my preference based on the listed design, not a claim that more drivers guarantee better game performance. I’d pick the AS10 instead if its clearly described bass-forward sound is the priority. Neither is my choice for anyone who needs a built-in mic or transparency mode.
Are the Linsoul KZ AS16 and AS10 wireless?
No. Both are listed as wired earphones with a 3.5 mm jack. Check your device’s connections before choosing, especially if it lacks a 3.5 mm port.
For a more elaborate driver arrangement and a stated passive-noise-reduction figure, I’d choose the AS16. The AS10 may suit you better if you prefer its described strong bass and prominent mids. Neither sheet gives latency or positional-audio test results.
Neither is listed with a microphone, and neither product description specifies transparency mode. Both list passive noise control, which is different from a mode that uses microphones to let outside sound through.
Compare the current product details and price on Amazon before deciding; I can’t determine value without current pricing. On features alone, the AS16 offers eight balanced-armature drivers per side and a stated passive-noise-reduction figure, while the AS10 has five drivers per side and a distinctly bass-forward description.
• Delton 10X vs Symphonized Earbuds 3.5mm: Wireless Headphones
• our Fiodio 7.1 vs Wentronic Y05 pick
• AHORALA Active Noise Cancelling vs SIVGA M260
• Amazon Renewed Turtle Beach Stealth vs NBCP PS5
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.